The Kinetics of Thermal Decomposition of Polymers

The rate equations for the thermal decomposition of a polymer by a random scission reaction followed by evaporation of low molecular weight species are solved using a different approach to that used by previous workers. The results obtained are in agreement with their conclusions.     

Kinetics of Thermal Decomposition of Thiourea

Thermal decomposition of thiourea in a melt was studied by isothermal and nonisothermal kinetic methods. The influence of the gas flow rate over the melt, layer thickness, and other factors on the process was elucidated. The kinetic parameters of the steps of formation of guanidinium thiocyanate and solid cyclic compounds, products of thiourea thermolysis, were determined.     

Kinetics of Thermal Decomposition of Dolomite

The thermal decomposition reactions of calcitic dolomite were investigated. Simultaneous TG/DTG/DTA were applied under non-isothermal conditions. From the recorded curves, the activation energies, pre-exponential factors and thermodynamic parameters of activation were calculated for the two thermal decomposition steps. This revised version was published online in August 2006 with corrections to the Cover Date.     

Kinetics of Thermal Decomposition of Plumbo-jarosite

An investigation was carried out on the kinetics of thermal decomposition of plumbo-jarosite. The kinetic models of dissociation of the compounds in the ore were identified. The results of the kinetic studies and the mechanism of the process are discussed. The thermal decomposition of plumbo-jarosite occurs in three stages: the first up to 763, the second up to 1023 and the third up to 1223 K, the corresponding activation energy values being 62.2, 60.3 and 98.0 kJ mol^–1 , respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

聚氨酯胶粘剂的热分解动力学研究

采用热分析技术考察了通用型聚氨酯胶粘剂在空气中的热解过程, 并通过TG方法和动力学方法研究了各步反应的活化能E、指前因子A等动力学参数. 通过等失重转化率法校验了两种方法所获得的E和A值. 结果表明, 聚氨酯胶粘剂有三个主要降解阶段, 第一降解阶段的活化能为144.31-148.35 kJ·mol^-1, 第二个降解阶段的活化能为196.96-204.26 kJ·mol^-1, 第三个降解阶段的活化能为202.97-205.27 kJ·mol^-1; 热降解过程为一级反应, 随着失重百分率的增大, 热分解反应活化能增大. 此外, 聚氨酯胶粘剂具有较高的热稳定性, 预测其在35 ℃的空气中失重5%时的热老化寿命为10年.     

柚皮苷的热稳定性及其热分析动力学研究

用TG-DTG/DTA方法研究了柚皮苷的热降解过程及热分析动力学. 热重分析结果表明该物质的失重过程分两步进行. 第一步为结晶水脱出, 其温度范围为343～545 K, 第二步为其分子骨架大规模降解, 其温度范围在545～857 K. 差热分析结果表明, 该物质的熔化温度为439.2 K. 使用Friedman和Ozawa-Flynn-Wall两种方法分别计算出该物质降解过程的活化能. 采用多步线性回归方法, 并参考常用的15种热解机理函数, 确定了柚皮苷热解过程最佳动力学模型为Fn-F2-F1.     

丙硫异烟胺的热稳定性及其热分解动力学

通过热重法研究了抗结核药物丙硫异烟胺的热稳定性, 计算了该药物的动力学参数并建立了热分解动力学方程. 用Kissinger和Ozawa-Flynn-Wall两种方法计算该药物热分解过程的活化能Ea=54.65 kJ·mol-1. 用Malek法推断该药物的动力学机理函数及指前因子A, 其结果分别为f(α)=α0.391(1-α)0.145, lnA=13.12. 此外, 用差热法测定该物质的熔点、摩尔熔化焓和摩尔熔化熵, 分别是414.09 K、23.21 kJ·mol-1和56.06 J·mol-1·K-1.     

Kinetics of Thermal Decomposition of Lithium Hexafluorophosphate

With on-line coupled thermo-gravimetric analyzer-Fourier transform infrared spectrometer technique, the thermal decomposition of lithium hexafluorophosphate (LiPF₆) and its gas evolution at inert environment (H₂O<10 ppm) were studied under both non-isothermal and isothermal conditions. The results showed that the LiPF₆ decomposition is a single-stage reaction with LiF as final residue and PF₅ as gas product. In addition, its decomposi-tion kinetics was determined as 2D phase boundary movement (cylindrical symmetry) under both non-isothermal and isothermal conditions. Furthermore, the activation energy of LiPF₆ decomposition was calculated as 104 and 92 kJ/mol for non-isothermal and isothermal con-ditions, respectively.     

二水草酸亚铁热分解反应动力学

用原位XRD技术和热重法分析了二水草酸亚铁的热分解过程, 并进行了动力学研究. 通过结合主曲线法和统计方法判定了热分解过程的动力学模型函数, 并求算了动力学参数. 在静态自产气氛下, 二水草酸亚铁脱水反应遵循随机成核与核增长模型, 草酸亚铁热分解生成氧化铁遵循相界面控制动力学模型. 结果表明, 该方法可以准确、可靠地判定非等温热分解反应的动力学模型函数,并求算动力学参数.     

Thermal Decomposition Kinetics of Triethylene Glycol Dinitrate

Introduction Triethylene glycol dinitrate (TEGDN) is a novel en-ergetic material containing two groups of NO2, which can be used as an energetic plasticizer ingredient in propellants because of its excellent proformance.1 It exhibits lower impact sensitivity, better thermostability, weaker poisonousness and volatility, and stronger effec-tiveness of plasticizing cellulose nitrate than nitroglyc-erine (NG). As a new plasticizer TEGDN has good ap-plication prospects in the near future. The…     

氟碳铈矿热分解动力学研究

采用Harcourt-Esson方法对不同来源的氟碳铈矿晶体热分解动力学进行了系统研究，得到的反应机制方程用普适积分法进一步验证，结果显示微山矿热分解为一级反应，不同品位的冕宁、非洲、芒廷帕斯氟碳铈矿热分解反应都是按照三维扩散机制进行的。     

司他夫定的热分解机理及动力学

采用TG-DTG-DSC测定司他夫定（STVD）在N2气和空气气氛中的热分解过程及其在热分解过程中不同阶段残留物的红外光谱,运用量子化学GAMESS软件计算STVD分子的键级,探讨了STVD的热分解机理。 采用Ozawa方法计算STVD各阶段热分解反应动力学参数,采用Dakin方程推算了不同使用温度下STVD的预期寿命。结果表明,STVD的热分解过程是一个三阶段过程,起始热分解步骤是联接胸腺嘧啶环与五元环的C-N键的断裂。 在N2气中,第一阶段热分解温度范围为139~173 ℃,失重21.2%,反应活化能Ea=168.9 kJ/mol,指前因子A=2.884×1019 min-1;第二阶段热分解温度范围为173~313 ℃,失重56.2%,Ea=96.4 kJ/mol,A=2.884×108 min-1;第三阶段分解速率缓慢,至880 ℃仍有10.9%残重。 在空气中,第一阶段热分解温度范围为139~166 ℃,失重19.1%,Ea=168.1 kJ/mol,A=2.188×1019 min-1;第二阶段热分解温度范围为166~314 ℃,失重53.9%,Ea=154.9 kJ/mol,A=8.913×1013 min-1;第三阶段热分解温度范围314~550 ℃,失重27%,Ea=116.9 kJ/mol,A=3.548×108 min-1。 STVD在常温下具有较好的热稳定性。     

地开石热分解过程及非等温动力学研究

Fourier-transform infrared emission spectroscopy was used to study the dehydroxylation behavior of the thermal decomposition of dickite from Chenxi, Hunan Province, China. Dehydroxylation of dickite was followed by a loss of intensity of the 3620.73, 3695.34 cm-1 OH-stretching bands and 916.06, 1009.33 cm-1 OH bending bands. The thermal decomposition was investigated by thermogravimetric analysis (TGA). A good agreement is found with TG curves of dickite and the mass loss is 13.7% (close to the theoretical value). The non-isothermal kinetics of the thermal decomposition of dickite was studied in TG-DTG curves over the temperature range from 298 K to 1123 K by thermogravimetry and differential thermal analysis in air. Mathematical analysis of TG-DTG data using the integral methods (Coats-Redfern equation, HM equation, MKN equation) and differential method (Achar equation) shows that the thermal decomposition of dickite accords F2 mechanism. The kinetic parameters such as the activation energy (E=131.62 kJ/mol), pre-exponential factor (A=108.30 s-1) and reaction order (n=2.1) are reported. The Ozawa method was used to analyse the activation energy of the same sample at different heating rate and gave 133.07 kJ/mol. The kinetic parameters calculated from different equation are rather close to each other.     

消旋卡多曲在空气中的热分解动力学

用热分析(TG/DTA/DSC)技术研究了消旋卡多曲(C₂₁H₂₁NO₄S)在空气中的热分解过程. 热分析结果表明, 消旋卡多曲在空气中一步分解, 其熔点为77.4 ℃. 用Friedman法, Flynn-Wall-Ozawa (FWO)法和ASTM E698法求取了分解过程的活化能E, 并通过多元线性回归法给出了可能的机理函数.     

水杨酸钴非等温热分解动力学研究

用热分析(TG/DTG)、X射线衍射(XRD)技术研究了固态物质水杨酸钴在空气中热分解的过程。热分析结果表明,水杨酸钴在空气中分两步分解,其失重率与理论计算失重率相吻合;XRD结果表明,水杨酸钴分解的终产物为Co3O4。用Friedman法和Flynn-Wall-Ozawa(FWO)法求取了分解过程的活化能E,并用多元线性回归和多元非线性回归法给出了可能的机理函数,由这些方法得到的动力学数据相互比较吻合。     

基于质谱的六硝基六氮杂异伍兹烷热分解动力学

采用低能电子轰击质谱研究了六硝基六氮杂异伍兹烷(HNIW)的裂解过程, 建立了质谱中离子强度曲线的非等温动力学处理方法, 根据产物离子的Arrhenius曲线解释了HNIW热分解的机理. 结果表明, HNIW质谱裂解的表观活化能为145.1 kJ·mol-1. 在130-150 ℃范围内, HNIW质谱的离子产物主要是电子轰击产生的, 其活化能在28-41 kJ·mol-1之间; 在213-228 ℃范围内, 离子主要是热分解产生的, 其活化能在143-179 kJ·mol-1之间. HNIW在213-228 ℃的热分解动力学参数存在良好的动力学补偿效应, 补偿效应公式为lnA=0.252Ea-0.645. HNIW 热分解的主要反应为HNIW.438→6NO2+2HCN+HNIW.108, HNIW.438→6NO2+3HCN+HNIW.81, HNIW.438→6NO2+4HCN+HNIW.54.     

金属卟啉的热稳定性及热分解动力学研究

热重分析;金属卟啉的热稳定性及热分解动力学研究     

2，4，6-三硝基间苯二酚钡一水化合物的热分解动力学(英)

0IntroductionBarium2,4,6鄄trinitroresorecinatemonohydrate,Ba(TNR)·H2O,hasgooddetonatingpropertiesandissensitivetoflame.Itcanbeusedasinitiatingagent,igniterpowderordelaypowder.Itspreparation[1],pro鄄perties[1],crystalstructure[1]andthermalbehavior[2]haveb…     

Thermal Decomposition Kinetics of Lead 2,4,6-Trinitroresorcinate Monohydrate

IntroductionLead 2 ,4,6- trinitroresorcinate monohydrate,Pb( TNR)· H2 O,has good detonating propertiesand is sensitive to flame.It can be used as initiat-ing agent,igniter powder or delay powder.Itspreparation,properties,crystal structure[1] andthermal behavior[2 ] have been reported.In the pre-sent paper,we will report its kinetic parametersand mechanism of thermal decomposition reactionstudied with TG- DTA,IR and DSC.This is quiteuseful in the evaluation of its thermal stability un-d…     

丹酚酸B的热稳定性及其热分解动力学研究

用TG-DTG 方法研究了丹参的有效成分丹酚酸B 的热降解过程. 热重分析结果表明该物质的失重过程分两步进行. 笫一步为脱去吸附水, 其温度范围为305～373 K, 第二步为丹酚酸B 分子骨架大规模降解, 其温度范围在413～864 K. 用Friedman 和Ozawa-Flynn-Wall 两种方法分别计算出该药物降解过程中的三个阶段的活化能, 采用多步线性回归方法, 并参考常用的15 种热解机理函数, 确定了丹酚酸B 热降解过程最佳动力学模型为Fn-F2-F1.