ATRP与点击化学相结合制备环状聚甲基丙烯酸甲酯

利用原子转移自由基聚合(ATRP)与点击反应相结合制备环状聚合物. 根据ATRP原理, 用含端炔的有机卤化物作为引发剂时, 产物的一端为炔基, 另一端则为卤素原子, 而卤素原子本身可作为叠氮化物的原料, 从而可利用点击反应使聚合物成环.     

ATRP和点击化学结合法制备PDMAAm—PDMS—PDMAAm嵌段聚合物

采用原子转移自由基聚合（ATRP）法制得了端基分别为烯丙基和溴原子的聚二甲基丙烯酰胺（PDMAAm）,经叠氮基亲核取代后与端炔基聚二甲基硅氧烷进行点击反应,得到两亲三嵌段聚合物。利用^1HNMR、FTIR、GPC等测试方法对聚合物的结构进行了表征。结果表明：采用ATRP法合成的PDMAAm均聚物分子量分布较窄,通过点击化学法将热力学不相容的亲水性PDMAAm链段及疏水性聚二甲基硅氧烷（PDMS）链段制备PDMAAmPDMS—PDMAAm嵌段聚合物,是一种高效易行的方法。     

星型POSS/PMMA复合材料的ATRP合成及其热性能研究

以γ-氯丙基三乙氧基硅烷为原料合成八官能团γ-氯丙基多面体低聚倍半硅氧烷(POSS),以该POSS为引发剂,通过原子转移自由基聚合(ATRP)合成具有星型结构的POSS/PMMA复合材料.通过傅立叶红外(FTIR)、核磁共振(NMR)、凝胶渗透色谱(GPC)和X-射线衍射(XRD)等手段对POSS和POSS/PMMA的化学组成和结构进行了表征,结果表明已经合成八官能团γ-氯丙基POSS,POSS/PMMA复合材料具有分子设计的预定结构,且复合材料的分子结构得到了较好的控制.通过ATRP法实现了POSS在聚合物中的单分散.此外,TGA的研究表明,POSS的引入提高了聚合物的热稳定性.     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——三层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型具有梯度极性的多羟基多臂星状聚合物刷 .端羟基超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 )与 2 溴 异丁基酰溴反应制得大分子引发剂 (HP Br) ,以Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)为催化体系 ,进行甲基丙烯酸甲酯 (MMA)的ATRP反应 ,得到以甲基丙烯酸甲酯为臂的多臂星状超支化聚合物 (HP g PMMA) .又以HP g PMMA为引发剂 ,进行甲基丙烯酸羟乙酯 (HEMA)的ATRP聚合 ,得到核壳型具有梯度极性的多羟基多臂星状超支化聚合物 (HP g PMMA b PHEMA) ,继续将其羟基官能团溴代化 (与 2 溴 异丁基酰溴反应 ) ,引发HEMA的ATRP溶液聚合 ,得到了多臂星状超支化聚合物刷 .产物的结构用1 H NMR、FTIR、GPC等进行了表征和测试 .     

原子转移自由基聚合(ATRP)在二氧化硅表面接枝中的应用

ATRP方法是在二氧化硅(SiO2)表面接枝聚合物的一种有效方法.通过硅烷偶联剂把ATRP引发剂键接到SiO2表面,然后进行表面ATRP聚合,可以在SiO2表面接枝各种均聚物、嵌段共聚物、超支化聚合物.聚合可以在有机溶剂或水中进行.把ATRP方法同其它聚合方法如氮氧稳定自由基聚合或开环聚合相结合,可以在SiO2表面接枝复杂结构的聚合物如V型嵌段共聚物、梳型共聚物等.SiO2表面ATRP聚合可以通过外加引发剂或外加二价铜来实现聚合可控.     

原子转移自由基法合成4-(4′-甲氧基苯基甲亚胺)苯酚功能化的六臂星型聚苯乙烯

星型聚合物由于其独特的构型及其粘弹性能使其可能在交联剂,离子交换聚合物,表面活性剂,增容剂,热塑性弹性体等方面得到广泛的应用.星型聚合物按其链结构可以分为,星型(嵌段)聚合物[1],星型-支化聚合物[2],星型-梳状聚合物[3].星型聚合物的合成始于20世纪50年代活性负离子聚合[     

水介质中ATRP法制备PDMAEMA及其温敏性

在30℃下以溴化亚铜-溴化铜混合物为催化剂,五甲基二乙烯三胺(PMDETA)为配体,在水介质中利用原子转移自由基聚合法(ATRP)合成聚合度达到300的聚甲基丙烯酸N,N-二甲基氨基乙酯(PDMAEMA)。核磁共振结果显示,聚合反应符合一级反应动力学描述。利用紫外可见分光光度计(UV-Vis)表征该聚合物的温敏性,结果表明,随着PDMAEMA聚合物链长的增加,其最低临界溶解温度(LCST)可降低至31.4℃。     

点击化学与活性自由基聚合联用构建特殊结构聚合物

点击化学由于其高效、可靠、高选择性等特点,一经提出便在复杂结构聚合物制备上得到广泛关注,而活性自由基聚合则具有聚合过程和聚合物结构可控等特点.本文综述了点击化学与活性自由基聚合方法如原子转移自由基聚合(ATRP),可逆加成断裂链转移聚合(RAFT),氮氧调控活性自由基聚合(NMP),以及原子转移氮氧自由基聚合反应(AT...     

由平面合成聚合物刷--表面引发原子转移自由基聚合研究进展

原子转移自由基聚合反应(ATRP)是实现活性聚合,获得可控聚合物的一种有效途径。通过表面引发原子转移自由基聚合,在材料表面合成聚合物刷,是改变材料表面特征的有效方法。本文综述了表面引发原子转移自由基聚合合成聚合物刷及其最新进展。     

原子转移自由基聚合(ATRP)在星形聚合物合成中的应用

综述了近10 年来采用原子转移自由基聚合(ATRP) 法合成星形聚合物的研究进展。从聚合单体、引发剂、聚合方法和反应条件以及聚合物性质等方面讨论了原子转移自由基聚合在星形聚合物合成中的应用,并根据聚合方法和引发剂对各种反应进行了分类。对原子转移自由基聚合技术在合成功能性复杂星形聚合物中的应用进行了展望。     

Star polymers by ATRP of styrene and acrylates employing multifunctional initiators

Multifunctional initiators for atom transfer radical polymerization (ATRP) are prepared by converting ditrimethylolpropane with four hydroxyl groups, dipentaerythritol with six hydroxyl groups, and poly(3‐ethyl‐3‐hydroxymethyl‐oxetane) with ～11 hydroxyl groups to the corresponding 2‐bromoisobutyrates or 2‐bromopropionates as obtained by reaction with acid bromides. Star polystyrene (PS) is produced by using these macroinitiators and neat styrene in a controlled manner by ATRP at 110 °C, employing the catalytic system CuBr and bipyridine. M_n up to 51,000 associated with narrow molecular weight distributions (PDI < 1.1) are obtained with conversions up to 32%. Hydrolysis of the star‐PS leads to linear chains having the expected M_n values. The star‐PS polymers based on dipentaerythritol degrade thermally in nitrogen in a two‐step process in which the first low‐temperature step involves scission of the ester linkages and the second step corresponds to the normal PS degradation. Star poly(methyl acrylates) with various cores are likewise prepared in a controlled manner by ATRP of methyl acrylate in bulk and in solution at 60–80 °C with the 1,1,4,7,7‐pentamethyldiethylene triamine ligand. Under these conditions, higher conversions were possible still maintaining low PDI signaling controlled star growth. Multiarm stars of poly(n‐butyl acrylate) and poly(n‐hexyl acrylate) with controlled characteristics have also been prepared. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3748–3759, 2005     

Synthesis of Well‐Defined Figure‐of‐Eight‐Shaped Polymers by a Combination of ATRP and Click Chemistry

Well‐defined figure‐of‐eight‐shaped (8‐shaped) polystyrene (PS) with controlled molecular weight and narrow polydispersities has been prepared by the combination of atom transfer radical polymerization (ATRP) and click chemistry. The synthesis involves two steps: 1) Preparation of a linear tetrafunctional PS with two azido groups, one at each end of the polymer chain, and two acetylene groups at the middle of the chain. 2) Intramolecular cyclization of the linear tetrafunctional PS at a very low concentration by a click reaction to produce the 8‐shaped polystyrenes. The resulting intermediates and the target polymers were characterized by ¹H NMR and FT‐IR spectroscopy, and gel permeation chromatography. The glass transition temperatures (T_gs) were determined by differential scanning calorimetry and it was found that the decrease in chain mobility by cyclization resulted in higher T_gs for 8‐shaped polystyrenes as compared to their corresponding precursors.

     

水溶性星型聚丙烯酰胺的合成和表征

通过T8硅氧烷六面体选择性的硅氢化反应, 制备了一个具有八个激化位的硅氧烷六面体巨激化体, 并利用原子转移自由基聚合(ATRP)技术合成含无机核的星型聚丙烯酰胺高分子. 这类高分子具有良好的水溶性, 展现出分子量高度可控性和窄的分子量分布.     

基于原子转移自由基聚合和“Click”化学方法制备手性色谱固定相

应用原子转移自由基聚合(ATRP)法和"Click"化学方法,以含叠氮基的烯类化合物为单体,在硅胶表面引发聚合,制备了"梳状"手性固定相.该固定相的合成采用"接出"方法接枝聚合物链,使接枝层更为均匀,并且避免了传统合成方法(如物理吸附等)稳定性差的缺点.所得到的"梳状"手性固定相实现了对一些手性药物的分离;并考察了该固定相中聚合物链的密度和长度对其手性分离能力的影响.     

Effect of ligand on the synthesis of star polymers by resorcinarene‐based ATRP initiators

The effect of the steric hindrance on the initiating properties of two multifunctional resorcinarene‐based initiators in atom transfer radical polymerization (ATRP) was studied by using Cu(I)‐complexes of three multidentate amine ligands in the polymerization of tert‐butyl acrylate and methyl methacrylate. These ligands are less sterically hindered and have higher activities in the catalysis of ATRP of (meth)acrylates than 2,2′‐bipyridine. The polymerizations were faster and more controlled than with the 2,2′‐bipyridyl catalyst, but the tendency for bimolecular coupling increased. Even though the initiator was octafunctional, the resulting star polymers had only four arms. This indicates that the steric hindrance arising from the conformations of the initiators determines the structure of the polymer, but the ligand noticeably affects the controllability of the polymerization © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3349–3358, 2005     

A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

Polymer Brushes via ATRP: Role of Activator and Deactivator in the Surface‐Initiated ATRP of Styrene on Planar Substrates

The role of activator and deactivator species in the surface‐initiated atom‐transfer radical polymerization of styrene using CuBr/CuBr₂/pentamethyldiethylenetriamine as a model system is described. The influence of initially added deactivator with respect to the degree of controlling the layer growth and thickness is studied. Variation of the activator concentration results in changes of the kinetics as well as brush thicknesses consistent with the well‐known rate laws of ATRP.