Conformational preferences of non-prolyl and prolyl residues

The conformational study on Ac-Ala-NHMe (the alanine dipeptide) and Ac-Pro-NHMe (the proline dipeptide) is carried out using ab initio HF and density functional methods with the self-consistent reaction field method to explore the differences in the backbone conformational preference and the cis-trans isomerization for the non-prolyl and prolyl residues in the gas phase and in the solutions (chloroform and water). For the alanine and proline dipeptides, with the increase of solvent polarity, the populations of the conformation tC with an intramolecular C(7) hydrogen bond significantly decrease, and those of the polyproline II-like conformation tF and the alpha-helical conformation tA increase, which is in good agreement with the results from circular dichroism and NMR experiments. For both the dipeptides, as the solvent polarity increases, the relative free energy of the cis conformer to the trans conformer decreases and the rotational barrier to the cis-trans isomerization increases. It is found that the cis-trans isomerization proceeds in common through only the clockwise rotation with omega' approximately +120 degrees about the non-prolyl and prolyl peptide bonds in both the gas phase and the solutions. The pertinent distance d(N...H-N(NHMe)) can successfully describe the increase in the rotational barriers for the non-prolyl and prolyl trans-cis isomerization as the solvent polarity increases and the higher barriers for the non-prolyl residue than for the prolyl residue, as seen in experimental and calculated results. By analysis of the contributions to rotational barriers, the cis-trans isomerization for the non-prolyl and prolyl peptide bonds is proven to be entirely enthalpy driven in the gas phase and in the solutions. The calculated cis populations and rotational barriers to the cis-trans isomerization for both the dipeptides in chloroform and/or water accord with the experimental values.     

Conformational preferences and cis-trans isomerization of azaproline residue

The conformational study of N-acetyl-N'-methylamide of azaproline (Ac-azPro-NHMe, the azPro dipeptide) is carried out using ab initio HF and density functional methods with the self-consistent reaction field method to explore the effects of the replacement of the backbone CHalpha group by the nitrogen atom on the conformational preferences and prolyl cis-trans isomerization in the gas phase and in solution (chloroform and water). The incorporation of the Nalpha atom into the prolyl ring results in the different puckering, backbone population, and barriers to prolyl cis-trans isomerization from those of Ac-Pro-NHMe (the Pro dipeptide). In particular, the azPro dipeptide has a dominant backbone conformation D (beta2) with the cis peptide bond preceding the azPro residue in both the gas phase and solution. This may be ascribed to the favorable electrostatic interaction or intramolecular hydrogen bond between the prolyl nitrogen and the amide hydrogen following the azPro residue and to the absence of the unfavorable interactions between electron lone pairs of the acetyl carbonyl oxygen and the prolyl Nalpha. This calculated higher population of the cis peptide bond is consistent with the results from X-ray and NMR experiments. As the solvent polarity increases, the conformations B and B* with the trans peptide bond become more populated and the cis population decreases more, which is opposite to the results for the Pro dipeptide. The conformation B lies between conformations D and A (alpha) and conformation B* is a mirror image of the conformation B on the phi-psi map. The barriers to prolyl cis-trans isomerization for the azPro dipeptide increase with the increase of solvent polarity, and the cis-trans isomerization proceeds through only the clockwise rotation with omega' approximately +120 degrees about the prolyl peptide bond for the azPro dipeptide in the gas phase and in solution, as seen for the Pro dipeptide. The pertinent distance d(N...H-NNHMe) and the pyramidality of imide nitrogen can describe the role of this hydrogen bond in stabilizing the transition state structure and the lower rotational barriers for the azPro dipeptide than those for the Pro dipeptide in the gas phase and in solution.     

Conformational preferences of proline analogues with different ring size

The conformational study on L-azetidine-2-carboxylic acid (Ac-Aze-NHMe, the Aze dipeptide) and (S)-piperidine-2-carboxylic acid (Ac-Pip-NHMe, the Pip dipeptide) is carried out using ab initio HF and density functional methods with the self-consistent reaction field method to explore the differences in conformational preferences and cis-trans isomerization for proline residue and its analogues with different ring size in the gas phase and in solution (chloroform and water). The change of ring size by deleting a CH2 group from or adding a CH2 group to the prolyl ring results the remarkable changes in backbone and ring structures compared with those of the Pro dipeptide, especially in the C'-N imide bond length and the bond angles around the N-C(alpha) bond. The four-membered azetidine ring can have either puckered structure depending on the backbone structure because of the less puckered structure. The six-membered piperidine ring can adopt chair and boat conformations, but the chair conformation is more preferred than the boat conformation. These calculated preferences for puckering are consistent with experimental results from analysis of X-ray structures of Aze- and Pip-containing peptides. On going from Pro to Aze to Pip, the axiality (i.e., a tendency to adopt the axial orientation) of the NHMe group becomes stronger, which can be ascribed to reduce the steric hindrances between 1,2-substituted Ac and NHMe groups. As the solvent polarity increases, the polyproline II-like conformation becomes more populated and the relative stability of conformation tC with a C7 hydrogen bond between C'=O of the amino group and N-H of the carboxyl group decreases for both the Aze and Pip dipeptides, as seen for the Pro dipeptide. The cis population and rotational barriers for the imide bond increase with the increase of solvent polarity for both the Aze and Pip dipeptides, as seen for the Pro dipeptide. In particular, the cis-trans isomerization proceeds in common through only the clockwise rotation with omega' approximately +120 degrees about azetyl and piperidyl peptide bonds in the gas phase and in solution, as seen for alanyl and prolyl peptide bonds. The pertinent distance d(N...H-N(NHMe)) and the pyramidality of imide nitrogen can describe the role of this hydrogen bond in stabilizing the transition state structure, but the lower rotational barriers for the Aze and Pip dipeptides than those for the Pro dipeptide, which is observed from experiments, cannot be rationalized.     

Conformational preferences of N-methoxycarbonyl proline dipeptide

The conformational study on N-methoxycarbonyl-L-proline-N'-methylamide (Moc-Pro-NHMe, prolylcarbamate) is carried out using ab initio HF and density functional B3LYP methods with the self-consistent reaction field method in the gas phase and in solution (chloroform, acetonitrile, and water). The replacement of the N-acetyl group by the N-methoxycarbonyl group results in the changes in conformational preferences, populations for backbone and prolyl puckering, and barriers to cis-trans isomerization of the prolyl residue in the gas phase and in solution, although there are small changes in the geometry of the prolyl peptide bond and the torsion angles of backbone and prolyl ring. The cis population increases with the increase of solvent polarity, as found for Ac-Pro-NHMe (prolylamide), but it is amplified by 9% in the gas phase and about 17% in solution for prolylcarbamate compared with those for prolylamide. It is found that the cis-trans isomerization for prolylcarbamate proceeds through the clockwise rotation with omega' approximately +120 degrees about the prolyl peptide bond in the gas phase and in solution, as found for prolylamide. However, the rotational barriers to the cis-trans isomerization for prolylcarbamate are calculated to be 3.7-4.7 kcal/mol lower than those of prolylamide in the gas phase and in solution, and are found to be less sensitive to the solvent polarity. The calculated rotational barriers for prolylcarbamate in chloroform and water are in good agreement with the observed values. The shorter hydrogen-bond distance between the prolyl nitrogen and the amide H (H(NHMe)) of the NHMe group, the decrease in electron overlap of the prolyl C-N bond, and the favorable electrostatic interaction between the ester oxygen and the amide H(NHMe) for the transition state seem to play a role in lowering the rotational barrier of prolylcarbamate. The smaller molecular dipole moments of the ground- and transition-state structures for prolylcarbamate in the gas phase and in solution seem to be one of factors to make the rotational barrier less sensitive to the solvent polarity. As the solvent polarity increases (i.e., from the gas phase to chloroform to acetonitrile), the value of DeltaH(tc)(double dagger) decreases and the magnitude of DeltaS(tc)(double dagger) increases for prolylcarbamate, which results in a nearly constant value of the rotational barrier.     

Conformational preferences and cis-trans isomerization of L-lactic acid residue

The conformational study on N-acetyl- N'-methylamide of l-lactic acid (Ac-Lac-NHMe, the Lac dipeptide) is carried out using ab initio HF and density functional methods with the self-consistent reaction field method to explore its backbone conformational preferences and cis-trans isomerization for the depsipeptide with an ester bond in the gas phase and in solution. In the gas phase and in chloroform, the conformation tB with a trans depsipeptide bond is most preferred for the Lac dipeptide, whose backbone torsion angles are phi approximately -150 degrees and psi approximately -5 degrees , juxtaposed to those of the 3 10-helical structure. The larger shift in phi is brought to reduce the repulsion between the two carbonyl carbons of the acetyl and NHMe groups. However, the polyproline II-like tF conformation becomes more populated and the relative stability of conformation tB decreases significantly as the solvent polarity increases. This may be ascribed to weakening a C(5) hydrogen bond between the depsipeptidyl oxygen and the carboxyl amide hydrogen that plays a role in stabilizing the conformation tB in the gas phase and in chloroform. The cis populations about the depsipeptide bond are nearly negligible in the gas phase and in solution. The rotational barriers to the cis-trans isomerization of the depsipeptide bond for the Lac dipeptide are calculated to be about 11 kcal/mol, which is about half of those for the Ala dipeptide, although they increase somewhat with the increase of solvent polarity. The cis-trans isomerization of the depsipeptide bond proceeds through either clockwise or anticlockwise rotations with torsion angles of about +90 degrees or -90 degrees , respectively, in the gas phase and in solution, whereas it has been known that the isomerization proceeds through only the clockwise rotation for alanyl and prolyl peptide bonds. The pertinent distances between the depsipeptidyl oxygen and the carboxyl amide hydrogen can describe the role of this hydrogen bond in stabilizing the transition state structures in the gas phase and in solution.     

Conformational preference and cis-trans isomerization of 4(R)-substituted proline residues

We report here the conformational preference and prolyl cis-trans isomerization of 4(R)-substituted proline dipeptides, N-acetyl-N'-methylamides of 4(R)-hydroxy-L-proline and 4(R)-fluoro-L-proline (Ac-Hyp-NHMe and Ac-Flp-NHMe, respectively), studied at the HF/6-31+G(d), B3LYP/6-31+G(d), and B3LYP/6-311++G(d,p) levels of theory. The 4(R)-substitution by electron-withdrawing groups did not result in significant changes in backbone torsion angles as well as endocyclic torsion angles of the prolyl ring. However, the small changes in backbone torsion angles phi and psi and the decrease of bond lengths r(Cbeta-Cgamma) or r(Cgamma-Cdelta) appear to induce the increase of the relative stability of the trans up-puckered conformation and to alter the relative stabilities of transition states for prolyl cis-trans isomerization. Solvation free energies of local minima and transition states in chloroform and water were calculated using the conductor-like polarizable continuum model at the HF/6-31+G(d) level of theory. The population of trans up-puckered conformations increases in the order Ac-Pro-NHMe < Ac-Hyp-NHMe < Ac-Flp-NHMe in chloroform and water. The increase in population for trans up-puckered conformations in solution is attributed to the increase in population for the polyproline-II-like conformations with up puckering. The barriers DeltaGct++ to prolyl cis-to-trans isomerization for Ac-Hyp-NHMe and Ac-Flp-NHMe increase as the solvent polarity increases, as seen for Ac-Pro-NHMe. In particular, it was identified that the cis-trans isomerization proceeds through the clockwise rotation about the prolyl peptide bond for Ac-Hyp-NHMe and Ac-Flp-NHMe in chloroform and water, as seen for Ac-Pro-NHMe.     

Conformational preferences of proline oligopeptides

A conformational study on the terminally blocked proline oligopeptides, Ac-(Pro)(n)()-NMe(2) (n = 2-5), is carried out using the ab initio Hartree-Fock level of theory with the self-consistent reaction field method in the gas phase and in solutions (chloroform, 1-propanol, and water) to explore the preference and transition between polyproline II (PPII) and polyproline I (PPI) conformations depending on the chain length, the puckering, and the solvent. The mean differences in the free energy per proline of the up-puckered conformations relative to the down-puckered conformations for both diproline and triproline increases for the PPII-like conformations and decreases for the PPI-like conformations as the solvent polarity increases. These calculated results indicate that the PPII-like structures have preferentially all-down puckerings in solutions, whereas the PPI-like structures have partially mixed puckerings. The free energy difference per proline residue between the PPII- and PPI-like structures decreases as the proline chain becomes longer in the gas phase but increases as the proline chain becomes longer in solutions and the solvent polarity increases. In particular, our calculated results indicate that each of the proline oligopeptides can exist as an ensemble of conformations with the trans and cis peptide bonds in solutions, although the PPII-like structure with all-trans peptide bonds is dominantly preferred, which is reasonably consistent with the previously observed results. In diproline Ac-(Pro)(2)-NMe(2), the rotational barrier to the cis-to-trans isomerization for the first prolyl peptide bond increases as the solvent polarity increases, whereas the rotational barrier for the second prolyl peptide bond does not show the monotonic increase as the solvent polarity increases. When the rotational barriers for these two prolyl peptide bonds were compared, it could be deduced that the conformational transition from PPI with the cis peptide bond to PPII with the trans peptide bond is initiated at the C-terminus and proceeds to the N-terminus in water. This is consistent with the results from NMR experiments on polyproline in D(2)O but opposite to the results from enzymatic hydrolysis kinetics experiments on polyproline.     

The rate enhancement for prolyl cis-to-trans isomerization of cyclic CPFC peptide is caused by an increase in the vibrational entropy of the transition state

The conformational preferences and prolyl cis-trans isomerization of oxidized and reduced Ac-Cys-Pro-Phe-Cys-NH2 (CPFC peptides) have been carried out using the ab initio HF/6-31+G(d) and hybrid density functional B3LYP/6-311++G(d,p) levels of theory. The most preferred conformations of oxidized and reduced CPFC peptides with the trans prolyl peptide bond have a type-I beta-turn for the Pro-Phe sequence in common. In particular, the transition states for both forms are stabilized by the intramolecular hydrogen bonds between the prolyl nitrogen and the N-H group of the Phe3 residue. The rotational barrier DeltaGct to the cis-to-trans isomerization for the oxidized CPFC peptide is calculated to be 19.37 kcal/mol at the B3LYP/6-311++G(d,p)//HF/6-31+G(d) level of theory, which is lower by 0.88 kcal/mol than that of the reduced CPFC peptide. This may indicate that the rate constant kc-->t of the prolyl cis-to-trans isomerization for the oxidized form is about 4 times larger than that of the reduced form, which is reasonably consistent with the value deduced from NMR experiments. In particular, the increase in vibrational entropy for the transition state of the oxidized form over that of the reduced form contributes to enhance the rate constant for the prolyl cis-to-trans isomerization of the oxidized form.     

4-Methylpseudoproline derived from α-methylserine - synthesis and conformational studies

This paper presents the synthesis and solution conformational studies of the tripeptides Fmoc-Ala-(R)-(αMe)Ser(Ψ(H,H)Pro)-Ala-OBu(t) (6a) and Fmoc-Ala-(S)-(αMe)Ser(Ψ(H,H)Pro)-Ala-OBu(t) (6b). Additionally, the X-ray structure of 6a is given. NMR analysis corroborated by theoretical calculations (XPLOR) shows that in both peptides the amide bond between pseudoproline and the preceding amino acid is in the trans conformation. The same amide bond geometry was observed in the crystal state of 6a. The latter is additionally influenced by the presence of two symmetrically independent molecules in an asymmetric unit. Both molecules adopt a conformation which resembles β-turn type II, stabilized by hydrogen bonding. The conformational preferences and prolyl cis-trans isomerization of Ac-(αMe)Ser(Ψ(H,H)Pro)-NHMe (7) were explored at the IEFPCM/B3LYP/6-31+G(d) level of theory in vacuum, water and chloroform. It has been shown that the trans isomer predominates in water solutions and the cis isomer is preferred in chloroform. The conformation of 7 is down-puckered independently of the geometry of the amide bonds, with lower puckering in the transition state of the cis-trans isomerization.     

Direct measurement indicates a slow cis/trans isomerization at the secondary amide peptide bond of glycylglycine.

Spectral differences between the cis and the trans isomer of a secondary amide peptide bond were used to follow the time course of the cis/trans isomerization of Gly-Gly, Gly-Ala, Ala-Gly, and Ala-Ala dipeptides in the UV/vis region at 220 nm. Isomerization rates and Eyring activation energies were calculated from pH- and LiCl-mediated solvent jump experiments. Rate constants were found to be in a narrow range of 0.29 to 0.64 s(-)(1) for the zwitterionic dipeptides at 25 degrees C. The isomerization rate is about 2-fold higher for the monoionic forms of Gly-Gly. The zwitterionic Gly-Gly has an activation enthalpy DeltaH() of 71.6 +/- 4.9 kJ mol(-)(1) that is in the range of the rotational barriers of aromatic side chain dipeptides that have been measured by (1)H NMR magnetization transfer experiments. Late stages of protein backbone rearrangements often involve crossing the energy barrier for rotational isomerization of imidic peptide bonds. Our findings are consistent with the idea that a wide range of secondary amide peptide bonds are also able to induce slow rate-limiting steps in protein restructuring.     

Detection of cis-trans isomers of a synthetic peptide fragment of erythropoietin

The synthesis of the protected fragment t-butoxycarbonyl-alanine-isoleucine-serine(benzyl)-proline (Pro)-Pro-OH derived from the hormone erythropoietin is described. The analysis of the peptide by high-pressure liquid chromatography (HPLC) and thin-layer chromatography (TLC) yields apparently inconsistent results. Although HPLC consistently indicates the presence of only one component, TLC reveals a number of distinct species. Because satisfactory amino acid analysis and fast atom bombardment-mass spectrometry results are obtained, we think it possible that the distinct components arise from the cis-trans isomerization of the peptide bonds to the prolyl residues. An analysis using capillary electrophoresis under basic conditions identifies four components in the final product. Also, under similar conditions proton nuclear magnetic resonance spectroscopy is able to confirm the presence of cis and trans isomers. The results from this study demonstrate the usefulness of each of the four techniques in identifying the isomerism of the standard amino acid-Pro bond with respect to the peptide's ionic state.     

Determination of the cis-trans isomerization barrier of several L-peptidyl-L-proline dipeptides by dynamic capillary electrophoresis and computer simulation

Dynamic capillary electrophoresis (DCE) and computer simulation of the elution profiles with the theoretical plate and the stochastic model has been applied to determine the isomerization barriers of the three dipeptides L-alanyl-L-proline, L-leucyl-L-proline, and L-phenylalanyl-L-proline. The separation of the rotational cis-trans isomers has been performed in an aqueous 70 mM borate buffer at pH 9.5. Interconversion profiles featuring plateau formation and peak broadening were observed. To determine the rate constants k1 and k(-1) of the cis-trans isomerization in dynamic capillary electrophoresis, equations have been derived for the theoretical plate model and stochastic model. The electropherograms were simulated with the ChromWin software which uses the experimental data plateau height h(plateau), peak width at half height Wh, the total migration times of the cis-trans isomers tR and the electroosmotic break-through time t0 as well as the peak ratio [cis]/[trans]. From temperature-dependent measurements, the rate constants k1 and k(-1) and the kinetic activation parameters deltaG#, deltaH# and deltaS# of the cis-trans isomerization of the three dipeptides were obtained.     

Solvent Effects on the Energetics of Prolyl Peptide Bond Isomerization

Racemic Ac-Gly-[β,δ-(13)C]Pro-OMe was synthesized, and the kinetics and thermodynamics of the isomerization of its prolyl peptide bond were determined in nine solvents by using NMR and IR spectroscopy. The free energy of activation is 1.3 kcal/mol larger in water than in aprotic solvents, and correlates with the ability of a solvent to donate a hydrogen bond but not with solvent polarity. These results are consistent with conventional pictures of amide resonance, which require transfer of charge between oxygen and nitrogen during isomerization. Similar medium effects may modulate the stability of planar peptide bonds in the active site of peptidyl-prolyl cis-trans isomerases (PPIases) and during the folding, function, or lysis of proteins.     

Peralkynylated buta-1,2,3-trienes: exceptionally low rotational barriers of cumulenic C=C bonds in the range of those of peptide C--N bonds

A variety of 1,1,4,4-tetraal kynylbutatrienes and 1,4-dialkynylbutatrienes was synthezized by dimerization of the corresponding gem-dibromoolefins. Both (1)H and (13)C NMR spectroscopy indicated that the di- and tetraalkynylated butatrienes are formed as a mixture of cis and trans isomers. Variable temperature NMR studies evidenced a facile cis-trans isomerization, thus preventing the separation of these isomers by gravity or high-performance liquid chromatography (HPLC). For 1,1,4,4-tetraalkynylbutatrienes, the activation barrier deltaG( not equal ) was measured by magnetization transfer to be around 20 kcal mol(-1), in the range of the barrier for internal rotation about a peptide bond. Unlike the tetraalkynylated [3]cumulenes, 1,4-dialkynylbutatrienes are more difficult to isomerize and could, in one case, be obtained isomerically pure. Based on experimental data, the rotational barrier DeltaG( not equal ) for 1,4-dialkynylbutatrienes is estimated to be around 25 kcal mol(-1). The hypothesis of a stabilizing effect of the four alkynyl substituents on the proposed but-2-yne-1,4-diyl singlet diradical transition state of this cis-trans isomerization is further supported by a computational study.     

Electronic control of amide cis-trans isomerism via the aromatic-prolyl interaction

The cis-trans isomerization of prolyl amide bonds results in large structural and functional changes in proteins and is a rate-determining step in protein folding. We describe a novel electronic strategy to control cis-trans isomerization, based on the demonstration that interactions between aromatic residues and proline are tunable by aromatic electronics. A series of peptides of sequence TXPN, X = Trp, pyridylalanine, pentafluorophenylalanine, or 4-Z-phenylalanine derivatives (Z = electron-donating, electron-withdrawing, or electron-neutral substituents), was synthesized and Ktrans/cis analyzed by NMR. Electron-rich aromatic residues stabilized cis amide bond formation, while electron-poor aromatics relatively favored trans amide bond formation. A Hammett correlation between aromatic electronics and cis-trans isomerization was observed. These results indicate that the interaction between aromatic residues and proline, which is observed to stabilize cis amide bonds and is also a general stabilizing interaction ubiquitous in proteins and protein-protein complexes, is not stabilized exclusively by a classical hydrophobic effect. To a large extent, the aromatic-prolyl interaction is driven and controllable by an electronic effect between the aromatic ring pi-electrons and the proline ring, consistent with a C-H-pi interaction as the key stabilizing force. The aromatic-prolyl interaction is electronically tunable by 0.9 kcal/mol and is enthalpic in nature. In addition, by combining aromatic ring electronics and stereoelectronic effects using 4-fluoroprolines, we demonstrate broad tuning (2.0 kcal/mol) of cis-trans isomerism in tetrapeptides. We demonstrate a simple tetrapeptide, TWflpN, that exhibits 60% cis amide bond and adopts a type VIa1 beta-turn conformation.     

Extensive conformational searches of 13 representative dipeptides and an efficient method for dipeptide structure determinations based on amino acid conformers

Conformations of peptides are the basis for their property studies and the predictions of peptide structures are highly important in life science but very complex in practice. Here, thorough searches on the potential energy surfaces of 13 representative dipeptides by considering all possible combinations of the bond rotational degrees of freedom are performed using the density functional theory based methods. Careful analyses of the conformers of the 13 dipeptides and the corresponding amino acids reveal the connections between the structures of dipeptide and amino acids. A method for finding all important dipeptide conformers by optimizing a small number of trial structures generated by suitable superposition of the parent amino acid conformations is thus proposed. Applying the method to another eight dipeptides carefully examined by others shows that the new approach is both highly efficient and reliable by providing the most complete ensembles of dipeptide conformers and much improved agreements between the theoretical and experimental IR spectra. The method opens the door for the determination of the stable structures of all dipeptides with a manageable amount of effort. Preliminary result on the applicability of the method to the tripeptide structure determination is also presented. The results are the first step towards proving Anfinsen's hypothesis by revealing the relationships between the structures of the simplest peptide and its constituting amino acids. It implies that the structures of peptides are not only determined by their amino acid sequences, but also closely linked with the amino acid conformations. © 2009 Wiley Periodicals, Inc. J Comput Chem 2009     

Low temperature high-performance liquid chromatography of cis-trans proline dipeptides

Isomeric dipeptides which contain proline at the C-terminus and undergo on-column cis-trans isomerization were separated by reversed-phase chromatography at subambient column temperature. Chromatography at low temperatures offers a convenient method for measuring the relative concentrations of the isomers and, thus, the calculation of the equilibrium constants for such cis-trans isomerization at various conditions of solvent, pH, and temperature. Pure fractions of the cis and trans isomers were collected and used in kinetic studies of the isomerization. High-performance liquid chromatography at temperatures near the freezing point of the eluent is a potentially useful tool for the study of a wide range of biochemical molecules.     

The mechanism of cis-trans isomerization of prolyl peptides by cyclophilin

The mechanism of cis-trans isomerization of prolyl peptides catalyzed by cyclophilin (CyP) was studied computationally via molecular dynamics (MD) simulations of the transition state (TS) and the cis and trans forms of the ground state (GS), when bound to CyP and when free in aqueous solution. The MD simulations include four enzyme-bound species of tetrapeptide (Suc-Ala-XC([double bond]O)-NPro-Phe-pNA; X = Gly, Trp, Ala, and Leu). In water, the prolyl amide bond is favorably planar with the presence of conformers exhibiting +/-20 degrees twist of the C-N dihedral. In the active site a hydrogen bond between the cis-prolyl amide carbonyl O and the backbone amide N-H of Asn102 retains the 20 degrees twist of the C-N dihedral. The TS structure is characterized by a 90 degrees twist of the amide C-N bond and a more favorable interaction with Asn102 due to the shorter distance between Asn102(HN) and the amide carbonyl O. The conformational change of cis --> TS also involves pyramidalization of the amide N, which results in the formation of a hydrogen bond between the amide N and the guanidino group of Arg55. Both Asn102 and Arg55 are held in the same position in CyP.cis-isomer as in CyP.TS. In the ligand-free CyP the Arg55 guanidino group is highly disorganized and Asn102 is displaced 1 A from the position in the ligand-bound CyP. Thus, the organization of Arg55 and Asn102 occurs upon substrate binding. The geometrical complimentarity of the organized enzyme structure to the TS structure is a result of preferential binding of the proline N and the amide carbonyl of the TS compared to that of GS. However, the N-terminal part (Suc-Ala) becomes repositioned in the TS such that two hydrogen bonds disappear, one hydrogen bond appears and two other hydrogen bonds becomes weaker on the conversion of CyP.cis to CyP.TS. During this conversion, total hydrophobic contact between enzyme and the peptide is preserved. Thus, the interaction energies of GS and TS with enzyme are, as a whole, much alike. This does not support the contention that TS is bound more tightly than GS by K(m)/K(TS) = 10(6) in the cis --> trans reaction. Repositioning of the N-terminal part of the peptide on CyP.TS formation becomes more pronounced when the substrate X residue is changed from Gly < Trp < Ala < Leu. We propose that the larger turning of the N-terminus is responsible for the larger value of the experimentally observed Delta S(++) and Delta H(++), which sum up to little change in Delta G(++). The positioning of the Arg55 and the degree of 20 degrees twist of the amide C-N bond are considered as criteria for Near Attack Conformers (NACs) in cis-trans isomerization. NACs account for approximately 30% of the total GS populations of the cis-isomer. Similar NAC populations were observed with four different substrates. This is consistent with the insensitivity of enzymatic activity to the nature of the X residue. Also, the NAC population in CyP.trans-AAPF was comparable to that in CyP.cis-AAPF, in accord with similar experimentally measured rates of the cis --> trans and trans --> cis reaction in CyP. These NACs, found in CyP.cis and CyP.trans, resemble only one of the four possible TS configurations in the water reaction. The identity of this TS structure (syn/exo) is in accord with experimentally determined KIE values in the enzymatic reaction. However, the geometry of the active site was also complementary to another TS structure (anti/exo) that was not detected in the active site by the same KIE measurements, implying that the geometrical fitness of the TS cannot be a single determining factor for enzymatic reactions.     

Development of a Functional cis‐Prolyl Bond Biomimetic and Mechanistic Implications for Nickel Superoxide Dismutase

During recent years several peptide‐based Ni superoxide dismutase (NiSOD) models have been developed. These NiSOD models show an important structural difference compared to the native NiSOD enzyme, which could cause a completely different mechanism of superoxide dismutation. In the native enzyme the peptide bond between Leu4 and Pro5 is cis‐configured, while the NiSOD models exhibit a trans‐configured peptide bond between these two residues. To shed light on how the configuration of this single peptide bond influences the activity of the NiSOD model peptides, a new cis‐prolyl bond surrogate was developed. As surrogate we chose a leucine/alanine‐based disubstituted 1,2,3‐triazole, which was incorporated into the NiSOD model peptide replacing residues Leu4 and Pro5. The yielded 1,5‐disubstituted triazole nickel peptide exhibited high SOD activity, which was approximately the same activity as its parent trans‐configured analogue. Hence, the conformation of the prolyl peptide bond apparently has of minor importance for the catalytic activity of the metallopeptides as postulated in literature. Furthermore, it is shown that the triazole metallopeptide is forming a stable cyanide adduct as a substrate analogue model complex.     

Direct calculation of interconversion barriers in dynamic chromatography and electrophoresis: Isomerization of captopril

Dynamic capillary electrophoresis (DCE) and direct calculation of the rate constants of isomerization has been applied to determine the cis-trans isomerization barriers of the angiotensin-converting enzyme inhibitor captopril. The separation of the rotational cis-trans isomeric drug has been performed in an aqueous 50 mM borate buffer at pH 9.3. Interconversion profiles featuring plateau formation, peak-broadening, and peak coalescence were observed. To determine the rate constants of the forward and backward reaction (k(cis-->trans) and k(trans-->cis)) of the isomerization process in dynamic capillary electrophoresis, a novel straightforward calculation method using the experimental parameters plateau height, h(plateau), peak width at half height w(h), the total migration times of the cis-trans isomers t(R) and the electroosmotic break-through time t(0) as well as the peak ratio of the cis-trans isomers is presented for the first time. From temperature dependent measurements the rate constants k(cis-->trans) and k(trans-->cis) and the kinetic activation parameters DeltaG( not equal), DeltaH( not equal), and DeltaS( not equal) of the cis-trans isomerization of captopril were obtained. From the activation parameters the isomerization barriers of captopril at 37 degrees C under basic conditions were calculated to be DeltaG( not equal) (cis-->trans) = 90.3 kJ.mol(-1)and DeltaG( not equal) (trans-->cis) = 90.0 kJ.mol(-1*).