In Situ Formation of Gold Nanoparticles within a Polymer Particle and Their Catalytic Activities in Various Chemical Reactions

Composite materials consisting of nanoscale gold particles and protective polymer shells were designed and tested as catalysts in various chemical reactions. Initially, the systematic incorporation of multiple gold nanoparticles into a poly(N-isopropylacrylamide) particle was achieved by an in situ method under light irradiation. The degree of gold nanoparticle loading, along with the structural and morphological properties, was examined as a function of the amount of initial gold ions and reducing agent. As these gold nanoparticles were physically-embedded within the polymer particle in the absence of strong interfacial interactions between the gold nanoparticles and polymer matrix, the readily-accessible surface of the gold nanoparticles with a highly increased stability allowed for their use as recyclable catalysts in oxidation, reduction, and coupling reactions. Overall, the ability to integrate catalytically-active metal nanoparticles within polymer particles in situ allows for designing novel composite materials for multi-purpose catalytic systems.     

Surface modification of gold nanoparticles with polyhedral oligomeric silsesquioxane and incorporation within polymer matrices

A new approach to achieve polymer‐mediated gold ferromagnetic nanocomposites in a polyhedral oligomeric silsesquioxane (POSS)‐containing random copolymer matrix has been developed. Stable and narrow distributed gold nanoparticles modified by 3‐mercaptopropylisobutyl POSS to form Au‐POSS nanoparticles are prepared by two‐phase liquid‐liquid method. These Au‐POSS nanoparticles form partial particle aggregation by blending with poly(n‐butyl methacrylate) (PnBMA) homopolymer because of poor miscibility between Au‐POSS and PnBMA polymer matrix. The incorporation the POSS moiety into the PnBMA main chain as a random copolymer matrix displays well‐dispersed gold nanoparticles because the POSS‐POSS interaction enhances miscibility between gold nanoparticles and the PnBMA‐POSS copolymer matrix. This gold‐containing nanocomposite exhibits ferromagnetic phenomenon at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 811–819, 2009     

Incorporation of surface-derivatized gold nanoparticles into electrochemically generated polymer films

Stable colloidal solutions of gold nanoparticles surface-derivatized with a thiol monolayer have been prepared using two-phase (water–nitrobenzene) reduction of AuCl₄⁻ by sodium borohydride in the presence of 2-mercapto-3-n-octylthiophene (MOT). This kind of surface-functionalized gold nanoparticles can be easily incorporated into the poly(3-octylthiophene) (POT) films on electrode in the process of electrochemical polymerization leading to POT–gold nanoparticle (POT–Au) composite films. Scanning probe microscopy (SPM) and X-ray photoelectric spectroscopy (XPS) have been employed to characterize the surface-derivatized particles and the resulting films. The method of incorporation of nanoparticles into polymer by surface-derivatization and in situ polymerization can also be employed to prepare many other polymer–nanoparticle compostie materials.     

Preparation of Conductive Gold Nanowires in Confined Environment of Gold‐Filled Polymer Nanotubes

Continuous conductive gold nanofibers are prepared via the “tubes by fiber templates” process. First, poly(l‐lactide) (PLLA)‐stabilized gold nanoparticles (AuNP) with over 60 wt% gold are synthesized and characterized, including gel permeation chromatography coupled with a diode array detector. Subsequent electrospinning of these AuNP with template PLLA results in composite nanofibers featuring a high gold content of 57 wt%. Highly homogeneous gold nanowires are obtained after chemical vapor deposition of 345 nm of poly(p‐xylylene) (PPX) onto the composite fibers followed by pyrolysis of the polymers at 1050 °C. The corresponding heat‐induced transition from continuous gold‐loaded polymer tubes to smooth gold nanofibers is studied by transmission electron microscopy and helium ion microscopy using both secondary electrons and Rutherford backscattered ions.

     

In situ GISAXS investigation of gold sputtering onto a polymer template

Microphase-separation structures in mixed diblock-triblock copolymer thin films are used for the incorporation of gold atoms inside the polymer matrix via sputtering of gold. Polystyrene (PS) spheres are arranged in a liquidlike type with a well defined nearest neighbor distance inside a polyisoprene matrix acting as a template for directing the gold atoms. Sputtering conditions are selected with a very low sputtering rate to avoid clustering in the atmosphere so that gold reaches the polymer surface in its atomic state. Due to the mobility of the gold atoms and the selective interaction with the PS parts of the microphase separation structure, gold is accumulated inside the polymer film in the PS spheres, as probed in situ with grazing incidence small-angle X-ray scattering (GISAXS). Nominally 4.3 A of gold is deposited, which by diffusion is spread out vertically over a thickness of 280 nm. UV-vis spectroscopy reveals a small blue shift for the gold sputtered polymer film. Atomic force microscopy proves the absence of gold clusters on the film surface. For low sputtering rate, GISAXS proves good sensitivity for gold migration inside the polymer film and opens new possibilities for studying polymer-metal interaction.     

Functional polythiophene nanoparticles: size-controlled electropolymerization and ion selective response

We have synthesized a thiophene derivative, (4-benzeno-15-crown-5 ether)-thiophene-3-methylene-amine (BTA), which was used as a monomer for electrochemical polymerization on metallic surfaces to prepare functional polymer films. Self-assembly of BTA monomers on Au(111) surfaces promotes ordered polymerization to form polymer nanoparticles or clusters by which the size of the polymer nanoparticles can further be controlled electrochemically. The electropolymerization was monitored in situ by scanning tunneling microscopy to unravel the dynamics of the process and possible mechanisms. These are further supported by calculations using a semiquantative model of polymer clusters and X-ray photoelectron spectroscopy analysis. On the basis of these observations, we have attempted to optimize the construction of BTA polymer based ion selective electrodes. The BTA based polymer films, prepared from both aqueous solution and organic phase on gold electrodes, displayed selective sensitivity to potassium ions with a linear dependence of ion concentration over 4 orders of magnitude.     

Gold nanoparticle localization at the core surface by using thermosensitive core-shell particles as a template

We report novel thermosensitive hybrid core-shell particles via in situ gold nanoparticle formation using thermosensitive core-shell particles as a template. This method for the in situ synthesis of gold nanoparticles with microgel interiors offers the advantage of eliminating or significantly reducing particle aggregation. In addition, by using thermosensitive microgel structures in which the shell has thermosensitive and gel properties in water--whereas the core itself is a water-insoluble polymer--we were able to synthesize the gold nanoparticles only at the surface of the core, which had reactive sites to bind metal ions. After the gold nanoparticles were synthesized, electroless gold plating was carried out to control the thickness of the gold nanoshells. The dispersions of the obtained hybrid particles were characterized by dynamic light scattering and UV-vis absorption spectroscopy, and the dried particles were also observed by electron microscopy. Adaptation of the technique shown here will create a number of applications as optical, electronic, and biomedical functional materials.     

Preparation of glycopolymer‐substituted gold nanoparticles and their molecular recognition

Glycopolymer‐substituted gold nanoparticles were prepared via living radical polymerization with a reversible addition‐fragmentation chain transfer (RAFT) reagent. Polyacrylamide derivatives with α‐mannose (α‐Man) and N‐acetyl‐β‐glucosamine (β‐GlcNAc) were synthesized and hydrogenated to obtain thiol‐terminated polymer. The thiol‐terminated glycopolymers were mixed with gold nanoparticles to yield the polymer substituted gold nanoparticles with various diameters, which aggregated on addition of saccharide‐recognition proteins (lectins). The aggregation properties were analyzed using transmission electron microscopy and UV spectra. Molecular recognition was studied with E. coli, which induced aggregation of the nanoparticles at the cell periphery. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1412–1421, 2009     

The formation of porous nickel-containing polyacrylate nanocomposites

The formation of porous nickel-polyacrylate nanocomposites (the sorption of nickel ions by a polyacrylate matrix followed by their reduction with thiourea dioxide) was studied. The kinetics of sorption of nickel ions was determined, and the diffusion coefficient was found using the method of a moving boundary. Transmission electron microscopy was used to establish the size and distribution of nickel nanoparticles in a porous matrix depending on synthesis conditions. The localization of nanoparticles only inside polymer pores was shown to be determined by a decrease in the barrier to nucleation because of the heterogeneous nucleation mechanism. Nickel nanoparticles stabilized by polyacrylates can be used to decrease the intensity of high-power laser radiation.     

Macroscale Chemotaxis from a Swarm of Bacteria‐Mimicking Nanoswimmers

Inspired by the dynamics of bacterial swarming, we report a swarm of polymer‐brush‐grafted, glucose‐oxidase‐powered Janus gold nanoswimmers with a positive, macroscale chemotactic behavior. These nanoswimmers are prepared through the grafting of polymer brushes onto one side of gold nanoparticles, followed by functionalization with glucose oxidase on the other side. The resulting polymer‐brush‐functionalized Janus gold nanoswimmers exhibit efficient propulsion with a velocity of up to approximately 120 body lengths s^?1 in the presence of glucose. The comparative analysis of their kinematic behavior reveals that the grafted polymer brushes significantly improve the translational diffusion of Janus gold nanoswimmers. Particularly, these bacteria‐mimicking Janus gold nanoswimmers display a collectively chemotactic motion along the concentration gradient of a glucose resource, which could be observed at the macroscale.     

Size‐based proteins separation using polymer‐entrapped colloidal self‐assembled nanoparticles on‐chip

We report on a facile method to stabilize colloidal self‐assembled (CSA) nanoparticles packed in microchannels for high speed size‐based separation of proteins. Silica nanoparticles, self‐assembled in a network of microfluidic channels, were stabilized with a methacrylate polymer prepared in situ through photopolymerization. The entrapment conditions were investigated to minimize the effect of the polymer matrix on the structure of the packing and the separation properties of the CSA beds. SEM shows that the methacrylate matrix links the nanoparticles at specific sphere–sphere contact points, improving the stability of the CSA structure at high electric fields (up to at least 1800 V/cm), allowing fast and efficient separation. The %RSD of the protein migration times varied between 0.3 and 0.5% (n = 4, in 1 day) and <0.83% over a period of 7 days (n = 28 runs) in a single device, at high field strength. The overall %RSD of protein migration times from chip‐to‐chip across a single fabrication run was 4.3% (n = 3) and between fabrication runs was 11% (n = 35), with 87% fabrication yield, demonstrating reproducible packing and entrapment behavior. The optimized entrapped CSA beds demonstrated better separation performance (plate height, H ～ 200 nm) than similarly prepared on‐chip CSA beds without the polymer entrapment. Polymer‐entrapped CSA beds also exhibited superior protein resolving power: the minimum resolvable molecular weight difference of proteins in the polymer‐entrapped CSA bed is 0.6 kDa versus ～9 kDa for the native silica CSA bed (i.e. without polymer entrapment).     

Luminescence Resonance Energy Transfer Sensors Based on the Assemblies of Oppositely Charged Lanthanide/Gold Nanoparticles in Aqueous Solution

This work demonstrates luminescence resonance energy transfer (LRET) sensors based on lanthanide‐doped nanoparticles as donors (D) and gold nanoparticles as acceptors (A), combined through electrostatic interactions between the oppositely charged nanoparticles. Negatively charged lanthanide‐doped nanoparticles, YVO₄:Eu and LaPO₄:Ce,Tb, with high luminescence quantum yield and good water‐solubility, are synthesized through a polymer‐assisted hydrothermal method. Positively charged polyhedral and spherical gold nanoparticles exhibit surface plasmon resonance (SPR) bands centered at 623 and 535 nm, respectively. These bands overlap well with the emission of the Eu³⁺ and Tb³⁺ ions within the lanthanide nanoparticles. Herein, the gold nanoparticles are synthesized through a seed‐mediated cetyltrimethylammonium bromide (CTAB)‐assisted method. The assemblies of the oppositely charged donors and acceptors are developed into LRET‐based sensors exhibiting a donor quenching efficiency close to 100 %.     

Microwave and UV Assisted Methods for Obtaining Novel Composites Based on Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> with Embedded Gold Nanoparticles

Metallic nanoparticles embedded into the structure of metal oxides may play a role of catalytic substances. Such composites are mostly applied in oxidation reactions. The paper presents two one-step-methods for obtaining nanocomposites of gold embedded in the structure of iron oxide matrices (nanoAu/Fe₂O₃). Gold nanoparticles were formed in situ in the process of iron hydroxide dehydration. Thanks to the use of tannic acid it was possible to effectively reduce gold ions and stabilize the forming metal nanoparticles. The composites were prepared in the fields of microwave, ultraviolet radiation. The physicochemical properties of products were determined by scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, X-ray analysis and high-resolution transmission electron microscopy technique with EDS and elemental mapping mode. Also, the catalytic activity of the nanocomposites obtained was evaluated based on the process of methyl orange degradation. It was observed that products obtained according to the microwave radiation method are characterized by improved applying properties.     

One‐Step Preparation of Antimicrobial Polyrhodanine Nanotubes with Silver Nanoparticles

A simple synthetic method has been developed for the fabrication of antimicrobial polyrhodanine nanotubes with silver nanoparticles. Rhodanine monomer first forms one‐dimensional complexes with silver ions due to coordinative interactions and consecutively reduces the silver ions during chemical‐oxidation polymerization. The polymerization procedure is analyzed by transmission electron microscopy and scanning electron microscopy in situ. The synthesized silver nanoparticles/polyrhodanine nanotubes are applied as an antimicrobial agent against Gram‐negative bacteria, E. coli and Gram‐positive bacteria, S. aureus. The antimicrobial tests demonstrate that the silver/polyrhodanine nanotubes have superior antimicrobial properties to silver nanoparticles and rhodanine monomer.

     

Synthesis and properties of silver and gold nanocomposites in poly-1-vinyl-1,2,4-triazole matrix

Novel multifunctional hybrid nanocomposites with silver and gold nanoparticles stabilized by original polymer matrix based on poly-1-vinyl-1,2,4-triazole were synthesized and studied using UV and IR spectroscopy, X-ray diffraction analysis and transmission electron microscopy. The obtained nanocomposites comprise silver or gold nanoparticles of spherical and elliptical shape with size 3–20 nm and 1–10 nm, respectively.     

Fabrication of dendritic gold nanoparticles by use of an ionic polymer template

A facile method for the fabrication of dendritic gold nanoparticles (NPs) by use of an ionic polymer template has been developed. In situ generation of an imidazolium-based (cationic) polymer, poly[1-methyl-3-(4-vinylbenzyl)imidazolium], with AuCl4- counteranions is achieved by addition of HAuCl4 into a solution containing poly[1-methyl-3-(4-vinylbenzyl)imidazolium chloride]. Subsequent reduction with NaBH4 in water or in a mixture of ethanol and water affords various NPs depending on the conditions, including large dendritic gold NPs that have been analyzed by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and selected area electron diffraction (SAED). The structures of the dendritic gold NPs were found to depend on the ethanol concentration. Scanning electron microscopy (SEM) images of the ionic polymer reveal that the solvent used to deposit the polymer strongly influences its structure and may be correlated to the structure of the resulting NPs.     

Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.     

Synthesis of a nanocomposite containing a water‐soluble polythiophene derivative and gold nanoparticles

This paper reports on a facile method for synthesizing gold nanoparticles (AuNps) with diameter around 5 nm encapsulated with water‐soluble polythiophene sulfonate poly[2‐(3‐thienyl)ethyloxy‐4‐butylsulfonate] sodium salt (PTS) and their physical–chemical characterization. The synthesis of hybrid materials of polythiophene derivatives and gold nanoparticles is a way to improve the polymer properties, mainly in application for chemical and optical sensing platforms. The AuNps were prepared by reducing gold salt with acid aqueous sodium citrate by the Turkvich method in the presence of PTS, and both PTS and citrate helped to stabilize the AuNps. The suspensions of AuNp:PTS presented good chemical and photostability for long period of storage. The nanoparticles encapsulated with the polymer presented smaller diameters than those obtained using only sodium citrate, according to scanning electron microscopy images. The AuNps obtained were used for fabrication LbL films with commercial chitosan, which were characterized by impedance spectroscopy measurements. The results showed that the charge transfer resistance values (R_ct) decrease as the average diameter of the AuNps decreases and the proportion of PTS increases in the nanocomposite. Such increase of the nanocomposite conductivity, given by the low values of R_ct, indicates that the novel film architecture developed is promising for chemical sensing applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1245–1254     

Microsensor Chip Integrated with Gold Nanoparticles‐Modified Ultramicroelectrode Array for Improved Electroanalytical Measurement of Copper Ions

This paper presents a microsensor chip integrated with a gold nanoparticles‐modified ultramicroelectrode array (UMEA) as the working electrode for the detection of copper ions in water. The microsensor chip was fabricated with Micro‐Electromechanical System technique. Gold nanoparticles were electrodeposited onto the surface of UMEA at a constant potential of ?0.3 V. The ratio d/R_b of interelectrode spacing (d) over the individual electrode’s radius (R_b) was investigated to improve the electrochemical performance. The UMEA with a d/R_b of 20 showed the best hemispherical diffusion mode, resulted in fast response time and high current response. The gold nanoparticles increased the active surface area of UMEA by not changing the geometries of UMEA, and the current response was increased further. Incorporating the optimized characteristic of UMEA and gold nanoparticles, the microsensor showed a good linear range from 0.5 to 200 µg L^?1 of copper ions in the acetate buffer solutions with the method of square wave stripping voltammetry. Compared with the gold nanoparticles‐modified disk electrode, the gold nanoparticles‐modified UMEA showed higher sensitivity (0.024 µA mm^?2 µg^?1 L) and lower limit of detection (0.2 µg L^?1). Water samples from river water and tap water were analyzed by the microsensor chip with recovery ranging from 100.7 % to 107.8 %.     

Gold Nanoparticles Doped Three‐Dimensional Sol‐gel Matrix for Amperometric Human Chorionic Gonadotrophin Immunosensor

A novel electrochemical immunosensor for human chorionic gonadotrophin (hCG) was proposed by immobilization of hCG in gold nanoparticles doped three‐dimensional (3D) sol‐gel matrix and an interfacial competitive immunoreaction. The 3D organized composite structure was prepared by assemble of gold nanoparticles into a hydrolyzed (3‐mercaptopropyl)‐trimethoxysilane sol‐gel matrix, which showed good biocompatibility. After the interfacial competitive immunoreaction the formed HRP‐labeled immunoconjugate showed good enzymatic activity for the oxidation of o‐phenylenediamine by H₂O₂. With a competitive format, a method comprising of o‐phenylenediamine‐H₂O₂‐immobilized HRP labeled hCG immunoconjugate system for immunoassay of hCG from 5.0 to 30.0 mIU mL^?1 was developed. The immunosensor showed good precision, high sensitivity, acceptable stability and reproducibility and could be used for detection of hCG in human serum with the consistent results in comparison with those obtained by a commercial analyzer.