In this study, the group transfer polymerization (GTP) of the functional monomer 3‐(trimethoxysilyl)propyl methacrylate (TMSPMA) is reported to produce polymers of different architectures and topologies. TMSPMA is successfully polymerized and copolymerized with GTP to produce well‐defined (co)polymers that can be used to fabricate functional hybrid materials like hydrogels and films.
This communication describes photoresponsive gels, prepared using ring‐opening metathesis polymerization (ROMP), that dissolve upon irradiation with ultraviolet light. Exposure of mixtures of norbornene‐type ROMP monomers and new photoreactive cross‐linkers comprising two norbornene units bound through a chain containing o‐nitrobenzyl esters (NBEs) to well‐known ruthenium carbene catalysts gave cross‐linked polymer networks that swelled in organic solvents or water depending on the structure of the monomer. These gels became homogeneous upon irradiation with UV light, consistent with breaking of the cross‐links through photolysis of the NBE groups. The irradiation time required for homogenization of the gels depended on the cross‐link density and the structure of the photoresponsive cross‐linker.
The synthesis of symmetric cyclo poly(ε‐caprolactone)–block–poly(l (d )‐lactide) (c(PCL–b–PL(D)LA)) by combining ring‐opening polymerization of ε‐caprolactone and lactides and subsequent click chemistry reaction of the linear precursors containing antagonist functionalities is presented. The two blocks can sequentially crystallize and self‐assemble into double crystalline spherulitic superstructures. The cyclic chain topology significantly affects both the nucleation and the crystallization of each constituent, as gathered from a comparison of the behavior of linear precursors and cyclic block copolymers. The stereochemistry of the PLA block does not have a significant effect on the nonisothermal crystallization of both linear and cyclo PCL‐b‐PDLA and PCL‐b‐PLLA copolymers.
An alkyne‐functionalized ruthenium(II) bis‐terpyridine complex is directly copolymerized with phenylacetylene by alkyne polymerization. The polymer is characterized by size‐exclusion chromatography (SEC), 1H NMR spectroscopy, cyclic voltammetry (CV) measurements, and thermal analysis. The photophysical properties of the polymer are studied by UV–vis absorption spectroscopy. In addition, spectro‐electrochemical measurements are carried out. Time‐resolved luminescence lifetime decay curves show an enhanced lifetime of the metal complex attached to the conjugated polymer backbone compared with the Ru(tpy)22+ model complex.
Poly‐(N‐isopropylacrylamide) (PNIPA) hydrogel films doped with uniaxially aligned liquid crystalline (LC) nanosheets adsorbed with a dye are synthesized and its anomalous photothermal deformation is demonstrated. The alignment of the nanosheet LC at the cm‐scale is easily achieved by the application of an in‐plane or out‐of‐plane AC electric field during photo‐polymerization. A photoresponsive pattern is printable onto the gel with μm‐scale resolution by adsorption of the dye through a pattern‐holed silicone rubber. When the gel is irradiated with light, only the colored part is photothermally deformed. Interestingly, the photo‐irradiated gel shows temporal expansion along one direction followed by anisotropic shrinkage, which is an anomalous behavior for a conventional PNIPA gel.
Poly (N‐isopropylacrylamide) (pNIPAm)‐based hydrogels and hydrogel particles (microgels) have been extensively studied since their discovery and “popularization” a few decades ago. While their uses seem to have no bounds, this Feature Article is focused on their development and application for sensing small molecules, macromolecules, and biomolecules. Hydrogel/microgel‐based photonic materials with order in one, two, or three dimensions are highlighted, which exhibit optical properties that depend on the presence and concentration of various analytes.
Reversible addition–fragmentation chain transfer (RAFT) polymerization and characterization of an alkoxysilane acrylamide monomer using a trithiocarbonate chain transfer agent are described. Poly(N‐[3‐(trimethoxysilyl)propyl]acrylamide) (PTMSPAA) homopolymers are obtained with good control over the polymerization. A linear increase in the molecular weight is observed whereas the polydispersity values do not exceed 1.2 regardless of the monomer conversion. Moreover, PTMSPAA is used as a macro‐RAFT agent to polymerize N‐isopropylacrylamide (NIPAM). By varying the degree of polymerization of NIPAM within the block copolymer, different sizes of thermoresponsive particles are obtained. These particles are stabilized by the condensation of the alkoxysilane moieties of the polymers. Furthermore, a co‐network of silica and PTMSPAA is prepared using the sol–gel process. After drying, transparent mesoporous hybrids are obtained with a surface area of up to 400 m2 g−1.
Ethylene–propylene–methyl methacrylate (MMA) and ethylene–hexene–MMA A‐B‐C block copolymers with high molecular weight (>100 000) are synthesized using fluorenylamide‐ligated titanium complex activated by modified methylaluminoxane and 2,6‐di‐tert‐butyl‐4‐methylphenol for the first time. After diblock copolymerization of olefin is conducted completely, MMA is added and activated by aluminum Lewis acid to promote anionic polymerization. The length of polyolefin and poly (methyl methacrylate) (PMMA) is controllable precisely by the change of the additive amount of olefin and polymerization time, respectively. A soft amorphous polypropylene or polyhexene segment is located between two hard segments of semicrystalline polyethylene and glassy PMMA blocks.
The phase behavior of block copolymer based supramolecular complexes polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) and amphiphilic pentadecylphenol (PDP) molecules resembles the phase behavior of conventional block copolymers. Several PS‐b‐P4VP(PDP) complexes are found to self‐assemble into gyroid nanostructures. Typically, the grains are randomly oriented with a maximal size of several micrometers. Here, the orientation of a gyroid PS‐b‐P4VP(PDP) complex upon shearing is reported. It is found that the (111) gyroid lattice direction orients parallel to the shear direction after only several seconds of large amplitude oscillatory shearing. Oriented gyroid complexes can be used as templates for the preparation of metal nanofoams with improved ordering with potentially superior properties.
Photoinitiated reversible addition‐fragmentation chain transfer (RAFT) dispersion polymerization of 2‐hydroxypropyl methacrylate is conducted in water at low temperature using thermoresponsive copolymers of 2‐(2‐methoxyethoxy) ethyl methacrylate and oligo(ethylene glycol) methacrylate (Mn = 475 g mol−1) as the macro‐RAFT agent. Kinetic studies confirm that quantitative monomer conversion is achieved within 15 min of visible‐light irradiation (405 nm, 0.5 mW cm−2), and good control is maintained during the polymerization. The polymerization can be temporally controlled by a simple “ON/OFF” switch of the light source. Finally, thermoresponsive diblock copolymer nano‐objects with a diverse set of complex morphologies (spheres, worms, and vesicles) are prepared using this particular formulation.
A new method for fabricating hydrogels with intricate control over hierarchical 3D porosity using microfiber porogens is presented. Melt electrospinning writing of poly(ε‐caprolactone) is used to create the sacrificial template leading to hierarchical structuring consisting of pores inside the denser poly(2‐oxazoline) hydrogel mesh. This versatile approach provides new opportunities to create well‐defined multilevel control over interconnected pores with diameters in the lower micrometer range inside hydrogels with potential applications as cell scaffolds with tunable diffusion and transport of, e.g., nutrients, growth factors or therapeutics.
The synthesis of a novel photoreactive poly(ethylene glycol) (PEG)‐based polymer with caged carbonyl groups is reported. We further demonstrate its use for the on‐demand fabrication of hydrogels. For rapid gelation, a hydrazide‐functionalized PEG is used as the second component for the hydrogel preparation. The photoreactive PEG‐based polymer is designed for controlled cleavage of the protecting groups upon exposure to UV light releases free aldehyde moieties, which readily react with hydrazide groups in situ. This hydrogel system may find applications in controlled release drug delivery applications, when combined with in situ gelation. Furthermore, the possibility of forming gels specifically upon UV irradiation gives an opportunity for 3D fabrication of degradable scaffolds.
Copolymers of N‐isopropylacrylamide (NIPAM) and dopamine methacrylate can establish a reversible, self‐healing 3D network in aprotic solvents based on hydrogen bonding. The reactivity and hydrogen bonding formation of catechol groups in copolymer chains are studied by UV–vis and 1H NMR spectroscopy, while reversibility from sol to gel and inverse as well as self‐healing properties are tested rheologically. The produced reversible organogel can self‐encapsulate physically interacting or chemically bonded solutes such as drugs due to thermosensitivity of the used copolymer. This system offers dual‐targeted and controlled drug delivery and release—by slowing down release kinetics by supramolecular bonding of the drug and by reducing diffusion rates due to modulus increase.
The hierarchical self‐assembly of an amphiphilic block copolymer, poly(N,N‐dimethylacrylamide)‐block‐polystyrene with a very short hydrophilic block (PDMA10‐b‐PS62), in large granular nanoparticles is reported. While these nanoparticles are stable in water, their disaggregation can be induced either mechanically (i.e., by applying a force via the tip of the cantilever of an atomic force microscope (AFM)) or by partial hydrolysis of the acrylamide groups. AFM force spectroscopy images show the rupture of the particle as a combination of collapse and flow, while scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images of partly hydrolyzed nanoparticles provide a clear picture of the granular structure.
The wet and soft nature of hydrogels makes them useful as a mimic for biological tissues, and in uses such as actuators and drug delivery vehicles. For many applications the mechanical performance of the gel is critical, but gels are notoriously weak and prone to fracture. Free radical polymerization is a very powerful technique allowing for fine spatial and temporal control of polymerization, but also allows for the use of a wide range of monomers and mixtures. In this work, it is demonstrated that extremely tough and extensible hydrogels can be readily produced through simple radical polymerization of acrylamide or acrylic acid with a poly(ethylene oxide) macrocross‐linker. These gels, with a water content of 85%, are extremely elastic with an extension much more than 15 000% at 9 MPa true stress. They can be compressed over 98% at a stress of 17 MPa. They are notch‐insensitive, and the usual trouser tear test does not work because the tear simply does not propagate. This highly extensible nature seems to be related to very long chain lengths between cross‐links and efficient incorporation of chains into the network.
Herein, a novel photoinitiated polymerization‐induced self‐assembly formulation via photoinitiated reversible addition–fragmentation chain transfer dispersion polymerization of glycidyl methacrylate (PGMA) in ethanol–water at room temperature is reported. It is demonstrated that conducting polymerization‐induced self‐assembly (PISA) at low temperatures is crucial for obtaining colloidal stable PGMA‐based diblock copolymer nano‐objects. Good control is maintained during the photo‐PISA process with a high rate of polymerization. The polymerization can be switched between “ON” and “OFF” in response to visible light. A phase diagram is constructed by varying monomer concentration and degree of polymerization. The PGMA‐based diblock copolymer nano‐objects can be further cross‐linked by using a bifunctional primary amine reagent. Finally, silver nanoparticles are loaded within cross‐linked vesicles via in situ reduction, exhibiting good catalytic properties.
Macrocellular silicone polymers are obtained after solidification of the continuous phase of a poly(dimethylsiloxane) emulsion, which contains poly(ethylene glycol) drops of sub‐millimetric dimensions. Coalescence of the liquid template emulsion is prohibited by a reactive blending approach. The relationship is investigated in detail between the interfacial properties and the emulsion stability, and micro‐ and millifluidic techniques are used to generate macrocellular polymers with controlled structural properties over a wider range of cell sizes (0.2–2 mm) and volume fractions of the continuous phase (0.1%–40%). This approach could easily be transferred to a wide range of polymeric systems.
Tuning the chain‐end functionality of a short‐chain cationic homopolymer, owing to the nature of the initiator used in the atom transfer radical polymerization (ATRP) polymerization step, can be used to mediate the formation of a gel of this poly(electrolyte) in water. While a neutral end group gives a solution of low viscosity, a highly homogeneous gel is obtained with a phosphonate anionic moiety, as characterized by rheometry and diffusion nuclear magnetic resonance (NMR). This novel type of supramolecular control over poly(electrolytic) gel formation could find potential use in a variety of applications in the field of electro‐active materials.
Injectable hydrogels have been commonly used as drug‐delivery vehicles and tried in tissue engineering. Injectable self‐healing hydrogels have great advantage over traditional injectable hydrogels because they can be injected as a liquid and then rapidly form bulk gels in situ at the target site under physiological conditions. This study develops an injectable thermosensitive self‐healing hydrogel based on chain‐extended F127 (PEO90‐PPO65‐PEO90) multi‐block copolymer (m‐F127). The rapid sol–gel transition ability under body temperature allows it to be used as injectable hydrogel and the self‐healing property allows it to withstand repeated deformation and quickly recover its mechanical properties and structure through the dynamic covalent bonds. It is hoped that the novel strategy and the fascinating properties of the hydrogel as presented here will provide new opportunities with regard to the design and practical application of injectable self‐healing hydrogels.
Halo‐ester‐functionalized poly(ethylene glycol)s (PEGs) are successfully prepared by the transesterification of alkyl halo‐esters with PEGs using Candida antarctica lipase B (CALB) as a biocatalyst under the solventless conditions. Transesterifications of chlorine, bromine, and iodine esters with tetraethylene glycol monobenzyl ether (BzTEG) are quantitative in less than 2.5 h. The transesterification of halo‐esters with PEGs are complete in 4 h. 1H and 13C NMR spectroscopy with MALDI‐ToF and ESI mass spectrometry confirm the structure and purity of the products. This method provides a convenient and “green” process to effectively produce halo‐ester PEGs.
