A water‐soluble,AIE‐active polyelectrolyte for conventional and fluorescence lifetime imaging of mouse neuroblastoma neuro‐2A cells

A new conjugated polyelectrolyte containing tetraphenylethene units in the backbone is synthesized and characterized. This polyelectrolyte is water‐soluble and exhibits aggregation‐induced emission (AIE) behavior. It is biocompatible and can be directly used in conventional and fluorescence lifetime imaging of mouse neuroblastoma neuro‐2A cells, providing useful information of cellular morphology and intracellular aggregation or motion. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 672–680     

Water‐Soluble Fluorescent Probes Based on Dendronized Polyfluorenes for Cell Imaging

Novel water‐soluble dendronized fluorescent polyfluorenes (DFPFs) are prepared from hydrophilic monomers and hydrophobic comonomers. Incomplete energy transfer is found to result in a two‐color emission of the DFPFs at around 410 and 650 nm. The incomplete energy transfer can be attributed to the poor compatibility between the fluorene and benzothiadiazole units. Polyethylene oxide (PEO) encapsulation of the DFPFs shows over 90% cell viability, indicating good biocompatibility. These DFPFs show differential cellular uptake. P1 with fewer PEO chains exhibits limited cellular membrane uptake and low brightness in cells. By contrast, P3 with more PEO chains is efficiently internalized by cells and accumulated in the cytoplasm. A strong fluorescence from whole cells is also observed.     

Water‐Soluble Triarylborane Chromophores for One‐ and Two‐Photon Excited Fluorescence Imaging of Mitochondria in Cells

Three water‐soluble tetracationic quadrupolar chromophores comprising two three‐coordinate boron π‐acceptor groups bridged by thiophene‐containing moieties were synthesised for biological imaging applications. Compound 3 containing the bulkier 5‐(3,5‐Me₂C₆H₂)‐2,2′‐(C₄H₂S)₂‐5′‐(3,5‐Me₂C₆H₂) bridge is stable over a long period of time, exhibits a high fluorescence quantum yield and strong one‐ and two‐photon absorption (TPA), and has a TPA cross section of 268 GM at 800 nm in water. Confocal laser scanning fluorescence microscopy studies in live cells indicated localisation of the chromophore at the mitochondria; moreover, cytotoxicity measurements proved biocompatibility. Thus, chromophore 3 has excellent potential for one‐ and two‐photon‐excited fluorescence imaging of mitochondrial function in cells.     

A Water‐Soluble ESIPT Fluorescent Probe with High Quantum Yield and Red Emission for Ratiometric Detection of Inorganic and Organic Palladium

A novel fluorescent probe with a high quantum yield (0.41), large Stokes shifts (255 nm), and red emission (635 nm) was designed to detect all typical oxidation states of palladium species (0, +2, +4) by palladium‐mediated terminal propargyl ethers cleavage reaction in water solution without any organic media. The probe showed a high selectivity and excellent sensitivity for palladium species, with a detection as low as 57 nM (6.2 μg L^?1).     

Photoactivatable Aggregation‐Induced Emission Fluorophores with Multiple‐Color Fluorescence and Wavelength‐Selective Activation

Photoactivatable (caged) fluorophores are widely used in chemistry, materials, and biology. However, the development of such molecules exhibiting photoactivable solid‐state fluorescence is still challenging due to the aggregation‐caused quenching (ACQ) effect of most fluorophores in their aggregate or solid states. In this work, we developed caged salicylaldehyde hydrazone derivatives, which are of aggregation‐induced emission (AIE) characteristics upon light irradiation, as efficient photoactivatable solid‐state fluorophores. These compounds displayed multiple‐color emissions and ratiometric (photochromic) fluorescence switches upon wavelength‐selective photoactivation, and were successfully applied for photopatterning and photoactivatable cell imaging in a multiple‐color and stepwise manner.     

Novel Water‐Soluble Shape‐Regulatable Luminescent Nanoparticles by Non‐Covalently Bonded Self‐Assembly

Summary: Novel non‐covalently connected water‐soluble nanoparticles that contain poly(fluorene‐co‐phenylene) with hydroxy‐capped alkoxy side chains (PF3BOH) and poly(acrylic acid) (PAA) have been obtained and characterized. With different proportions of PF3BOH and PAA, the shape and size of the nanoparticles can be regulated. The nanoparticles are quite stable in water with no precipitate being observed after weeks. Transmission electron microscopy and dynamic laser light scattering are used to confirm the morphology of the PF3BOH/PAA nanoparticles. Their optical properties have been investigated and show similar optoelectronic properties to a PF3BOH solid film although they do not undergo aggregation.

TEM images of the nanoparticles obtained upon varying the PAA/PF3BOH content.     

A Fluorogenic Probe with Aggregation‐Induced Emission Characteristics for Carboxylesterase Assay through Formation of Supramolecular Microfibers

Herein, we report a novel fluorescent “light‐up” probe useful for carboxylesterase assay that is based on a tetraphenylethylene derivative containing carboxylic ester groups. The specific cleavage of the carboxylic ester bonds by carboxylesterase results in the generation of a relatively hydrophobic moiety that self‐assembles into supramolecular microfibers, thus giving rise to “turn‐on” fluorescent signals. A high sensitivity towards carboxylesterase was achieved with a detection limit as low as 29 pM , which is much lower than the corresponding assays based on other fluorescent approaches.     

Water‐soluble anionic conjugated polymers for metal ion sensing: Effect of interchain aggregation

Three sulfonato‐containing fluorene‐based anionic water‐soluble conjugated polymers, which are specially designed to link fluorene with alternating moieties such as bipyridine ( P1 ), pyridine ( P2 ), and benzene ( P3 ) have been synthesized via the Pd‐catalyzed Sonogashira‐coupling reaction, respectively. These polymers had good solubility in water and showed different responses for transition metal ions with different valence in aqueous environments: the fluorescence of bipyridine‐containing P1 can be completely quenched by addition of all transition metal ions selected and showed a good selectivity for Ni²⁺; the pyridine‐containing P2 had a little response for monovalent and divalent metal ions while showed good quenching with the addition of trivalent metal ions (with a special selectivity for Fe³⁺); P3 had responses only for the trivalent metal ions within the ionic concentration we studied. After investigation of the UV‐vis absorption spectra, PL emission spectra, DLS, and fluorescence lifetime of P1 – P3 in aqueous solution when adding transition metal ions, we found that the different spectrum responses of these polymers are attributed to the different coordination ability of the units linked with fluorene in the main chain. The energy or electron‐transfer reactions were the main reason for fluorescence quenching of P1 and P2 . On the other hand, interchain aggregation caused by trivalent metal ions lead to fluorescence quenching for P3 and also caused partly fluorescence quenching of P1 and P2 . These results revealed the origin of ionochromic effects of these polymers and suggested the potential application for these polymers as novel chemosensors with higher sensing sensitivity in aqueous environments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5057–5067, 2009     

Mitochondria‐Targeted Cancer Therapy Using a Light‐Up Probe with Aggregation‐Induced‐Emission Characteristics

Subcellular organelle‐specific reagents for simultaneous tumor targeting, imaging, and treatment are of enormous interest in cancer therapy. Herein, we present a mitochondria‐targeting probe (AIE‐mito‐TPP) by conjugating a triphenylphosphine (TPP) with a fluorogen which can undergo aggregation‐induced emission (AIE). Owing to the more negative mitochondrial membrane potential of cancer cells than normal cells, the AIE‐mito‐TPP probe can selectively accumulate in cancer‐cell mitochondria and light up its fluorescence. More importantly, the probe exhibits selective cytotoxicity for studied cancer cells over normal cells. The high potency of AIE‐mito‐TPP correlates with its strong ability to aggregate in mitochondria, which can efficiently decrease the mitochondria membrane potential and increase the level of intracellular reactive oxygen species (ROS) in cancer cells. The mitochondrial light‐up probe provides a unique strategy for potential image‐guided therapy of cancer cells.     

Simple Biosensor with High Selectivity and Sensitivity: Thiol‐Specific Biomolecular Probing and Intracellular Imaging by AIE Fluorogen on a TLC Plate through a Thiol–Ene Click Mechanism

A handy, specific, sensitive bioprobe has been developed. Tetraphenylethene (TPE) was functionalized by a maleimide (MI) group, giving a TPE‐MI adduct that was nonemissive in both solution and the solid state. It was readily transformed into a fluorogen showing an aggregation‐induced emission (AIE) property by the click addition of thiol to its MI pendant. The click reaction and the AIE effect enabled TPE‐MI to function as a thiol‐specific bioprobe in the solid state. Thus, the spot of TPE‐MI on a TLC plate became emissive when it had been exposed to L ‐cysteine, an amino acid containing a thiol group, but remained nonemissive when exposed to other amino acids that lack free thiol units. The thiol‐activated emission was rapid and strong, readily detected by the naked eye at an analyte concentration as low as approximately 1 ppb, thanks to the “lighting up” nature of the bioprobing process. Similarly, the emission of TPE‐MI was turned on only by the proteins containing free thiol units, such as glutathione. Clear fluorescence images were taken when living cells were stained by using TPE‐MI as a visualization agent, affording a facile fluorescent maker for mapping the distribution of thiol species in cellular systems.     

Facile Fabrication of AIE‐Active Fluorescent Polymeric Nanoparticles with Ultra‐Low Critical Micelle Concentration Based on Ce(IV) Redox Polymerization for Biological Imaging Applications

Fluorescent polymeric nanoparticles (FPNs) with aggregation‐induced emission (AIE) property have received increasing attention and possess promising biomedical application potential in the recent years. Many efforts have been devoted to the fabrication methodologies of FPNs and significant advance has been achieved. In this contribution, a novel strategy for the fabrication of AIE‐active amphiphilic copolymers is reported for the first time based on the Ce(IV) redox polymerization. As an example, ene group containing AIE‐active dye (named as Phe‐alc) is directly grafted onto a water soluble polymer polyethylene glycol (PEG) in H₂O/THF system under low temperature. Thus‐obtained amphiphilic fluorescent polymers will self‐assemble into FPNs with ultra‐low critical micelle concentration, ultra‐brightness, and great water dispersibility. Biological evaluation results suggest that the PEG‐poly(Phe‐alc) possess excellent biocompatibility and can be used for tracing their behavior in cells using confocal laser scanning microscope. These features make PEG‐poly(Phe‐alc) FPNs promising candidates for many biomedical applications, such as cell imaging, drug delivery vehicles, and targeted tracing. More importantly, many other functional groups can also be incorporated into these AIE‐active FPNs through the redox polymerization. Therefore, the redox polymerization should be a facile and effective strategy for fabrication of AIE‐active FPNs.

     

White‐Light Emission Strategy of a Single Organic Compound with Aggregation‐Induced Emission and Delayed Fluorescence Properties

A novel white‐light‐emitting organic molecule, which consists of carbazolyl‐ and phenothiazinyl‐substituted benzophenone (OPC) and exhibits aggregation‐induced emission‐delayed fluorescence (AIE‐DF) and mechanofluorochromic properties was synthesized. The CIE color coordinates of OPC were directly measured with a non‐doped powder, which presented white‐emission coordinates (0.33, 0.33) at 244 K to 252 K and (0.35, 0.35) at 298 K. The asymmetric donor–acceptor–donor′ (D‐A‐D′) type of OPC exhibits an accurate inherited relationship from dicarbazolyl‐substituted benzophenone (O2C, D‐A‐D) and diphenothiazinyl‐substituted benzophenone (O2P, D′‐A‐D′). By purposefully selecting the two parent molecules, that is, O2C (blue) and O2P (yellow), the white‐light emission of OPC can be achieved in a single molecule. This finding provides a feasible molecular strategy to design new AIE‐DF white‐light‐emitting organic molecules.     

Novel Water‐Soluble Poly(m‐benzamide)s: Precision Synthesis and Thermosensitivity in Aqueous Solution

Summary: Chain‐growth polycondensations of 3‐aminobenzoic acid methyl esters 1a and 1b , bearing a tri‐ or tetra(ethylene glycol) methyl ether unit on the amino group, respectively, were carried out with lithium hexamethyldisilazide (LiHMDS) as a base and phenyl 4‐methylbenzoate ( 2 ) as an initiator in THF at 0 °C. The poly(m‐benzamide)s obtained in the presence of N,N,N′,N′‐tetramethylethylenediamine (TMEDA) possessed narrow molecular weight distributions ( < 1.2) with molecular weights that were determined by the feed ratios of [ 1 ]₀/[ 2 ]₀. Poly 1a and poly 1b were each soluble in water and exhibited a lower critical solution temperature (LCST) in water. Furthermore, the phase separation in water depended on the length of the oligo(ethylene glycol) side chain and on the molecular weight and molecular weight distribution of poly 1 .

Thermally sensitive water‐soluble poly(m‐benzamide)s.     

Novel Functional Conjugative Hyperbranched Polymers with Aggregation‐Induced Emission: Synthesis Through One‐Pot “A2+B4” Polymerization and Application as Explosive Chemsensors and PLEDs

With the aim to develop new tetraphenylethylene (TPE)‐based conjugated hyperbranched polymer, TPE units, one famous aggregation‐induced emission (AIE) active group, are utilized to construct hyperbranched polymers with three other aromatic blocks, through an “A₂+B₄” approach by using one‐pot Suzuki polycondensation reaction. These three hyperbranched polymers exhibit interesting AIEE behavior and act as explosive chemsensors with high sensitivity both in the nanoparticles and solid states. This is the first report of the AIE activity of the TPE‐based conjugated hyperbranched polymers. Their corresponding PLED devices also demonstrate good performance.     

Single Benzene Green Fluorophore: Solid‐State Emissive,Water‐Soluble,and Solvent‐ and pH‐Independent Fluorescence with Large Stokes Shifts

Benzene is the simplest aromatic hydrocarbon with a six‐membered ring. It is one of the most basic structural units for the construction of π conjugated systems, which are widely used as fluorescent dyes and other luminescent materials for imaging applications and displays because of their enhanced spectroscopic signal. Presented herein is 2,5‐bis(methylsulfonyl)‐1,4‐diaminobenzene as a novel architecture for green fluorophores, established based on an effective push–pull system supported by intramolecular hydrogen bonding. This compound demonstrates high fluorescence emission and photostability and is solid‐state emissive, water‐soluble, and solvent‐ and pH‐independent with quantum yields of Φ=0.67 and Stokes shift of 140 nm (in water). This architecture is a significant departure from conventional extended π‐conjugated systems based on a flat and rigid molecular design and provides a minimum requirement for green fluorophores comprising a single benzene ring.