The combination of external potential dynamics and Brownian dynamics is introduced to study the kinetics of orientational ordering in block copolymer/superparamagnetic nanoparticle composites where the particles are smaller than the domain spacing and preferentially segregate into one block of the copolymer. This simulation method accounts for both excluded volume interactions and dipolar interactions between particles to quantify alignment kinetics. Two‐dimensional simulations reveal that higher dipolar interaction strengths lead to faster alignment of the block copolymer, where the orientation kinetics obeys an exponential rate law. The observed rate of alignment increases with increasing dipolar interaction strength and is dependent on the initial state of the block copolymer. The primary mechanism of orientational ordering is found to be the redistribution of monomer segments leading to bridging and growth of the block copolymer domains around the nanoparticles.
The hierarchical self‐assembly of an amphiphilic block copolymer, poly(N,N‐dimethylacrylamide)‐block‐polystyrene with a very short hydrophilic block (PDMA10‐b‐PS62), in large granular nanoparticles is reported. While these nanoparticles are stable in water, their disaggregation can be induced either mechanically (i.e., by applying a force via the tip of the cantilever of an atomic force microscope (AFM)) or by partial hydrolysis of the acrylamide groups. AFM force spectroscopy images show the rupture of the particle as a combination of collapse and flow, while scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images of partly hydrolyzed nanoparticles provide a clear picture of the granular structure.
Here, the preparation of a novel block copolymer consisting of a statistical copolymer N‐(2‐hydroxypropyl) methacrylamide‐s‐N‐(3‐aminopropyl) methacrylamide and a short terminal 3‐guanidinopropyl methacrylamide block is reported. This polymer structure forms neutral but water‐soluble nanosized complexes with siRNA. The siRNA block copolymer complexes are first analyzed using agarose gel electrophoresis and their size is determined with fluorescence correlation spectroscopy. The protective properties of the polymer against RNA degradation are investigated by treating the siRNA block copolymer complexes with RNase V1. Heparin competition assays confirm the efficient release of the cargo in vitro. In addition, the utilization of microscale thermophoresis is demonstrated for the determination of the binding strength between a fluorescently labeled polyanion and a polymer molecule.
The development of effective strategies for fabrication of fluorescent organic nanoparticles (FONs) with an aggregation‐induced emission (AIE) feature has an important impact on the biomedical applications of these AIE‐active FONs. In the current work, an ultrafast strategy for fabricating AIE‐active FONs is developed through a “one‐pot” microwave‐assisted, catalysts‐free, and solvent‐free Kabachnik–Fields (KF) reaction for the first time. It is demonstrated that such organophosphorous‐containing AIE‐active block polymers can be synthesized within 2 min under air atmosphere through the microwave‐assisted KF reaction. These polymers show amphiphilic properties and can self‐assemble into mPEG‐CHO‐Phe‐NH2‐DEP FONs, which display high water dispersibility and desirable optical properties. Biological evaluation results suggest that the mPEG‐CHO‐Phe‐NH2‐DEP FONs exhibit low toxicity and are potential for biological imaging applications. More importantly, many other multifunctional AIE‐active FONs can also be fabricated through the strategy described in this work owing to the universality of KF reaction. Besides, combined with the excellent properties of mPEG‐CHO‐Phe‐NH2‐DEP FONs, it is believed that such microwave‐assisted KF reaction shall be an effective route for designing various AIE‐active nanomaterials for different biomedical applications.
Poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA)‐based brush poly(phosphoamidate)s are successfully synthesized by a combination of ring‐opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP) following either a commutative two‐step procedure or a straightforward one‐pot process using Grubbs ruthenium‐based catalysts for tandem catalysis. Compared with the traditional polymerization method, combining ROMP and ATRP in a one‐pot process allows the preparation of brush copolymers characterized by a relatively moderate molecular weight distribution and quantitative conversion of monomer. Moreover, the surface morphologies and aggregation behaviors of these polymers are studied by AFM and TEM measurements.
In this study, the group transfer polymerization (GTP) of the functional monomer 3‐(trimethoxysilyl)propyl methacrylate (TMSPMA) is reported to produce polymers of different architectures and topologies. TMSPMA is successfully polymerized and copolymerized with GTP to produce well‐defined (co)polymers that can be used to fabricate functional hybrid materials like hydrogels and films.
Cyclic multiblock polymers with high‐order blocks are synthesized via the combination of single‐electron transfer living radical polymerization (SET‐LRP) and copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The linear α,ω‐telechelic multiblock copolymer is prepared via SET‐LRP by sequential addition of different monomers. The SET‐LRP approach allows well control of the block length and sequence as A‐B‐C‐D‐E, etc. The CuAAC is then performed to intramolecularly couple the azide and alkyne end groups of the linear copolymer and produce the corresponding cyclic copolymer. The block sequence and the cyclic topology of the resultant cyclic copolymer are confirmed by the characterization of 1H nuclear magnetic resonance spectroscopy, gel permeation chromatography, Fourier transform infrared spectroscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry.
Temperature‐triggered phase separation of recombinant proteins has offered substantial opportunities in the design of nanoparticles for a variety of applications. Herein, the temperature‐triggered phase separation behavior of a recombinant hydrophilic resilin‐like polypeptide (RLP) is described. The transition temperature and sizes of RLP‐based nanoparticles can be modulated based on variations in polypeptide concentration, salt identity, ionic strength, pH, and denaturing agents, as indicated via UV–Vis spectroscopy and dynamic light scattering (DLS). The irreversible particle formation is coupled with secondary conformational changes from a random coil conformation to a more ordered β‐sheet structure. These RLP‐based nanoparticles could find potential use as mechanically‐responsive components in drug delivery, nanospring, nanotransducer, and biosensor applications.
Herein, a novel photoinitiated polymerization‐induced self‐assembly formulation via photoinitiated reversible addition–fragmentation chain transfer dispersion polymerization of glycidyl methacrylate (PGMA) in ethanol–water at room temperature is reported. It is demonstrated that conducting polymerization‐induced self‐assembly (PISA) at low temperatures is crucial for obtaining colloidal stable PGMA‐based diblock copolymer nano‐objects. Good control is maintained during the photo‐PISA process with a high rate of polymerization. The polymerization can be switched between “ON” and “OFF” in response to visible light. A phase diagram is constructed by varying monomer concentration and degree of polymerization. The PGMA‐based diblock copolymer nano‐objects can be further cross‐linked by using a bifunctional primary amine reagent. Finally, silver nanoparticles are loaded within cross‐linked vesicles via in situ reduction, exhibiting good catalytic properties.
The synthesis of a series of dithienosilole–benzotriazole donor–acceptor statistical copolymers with various donor–acceptor ratios is reported, prepared by Kumada catalyst‐transfer polymerization. Statistical copolymer structure is verified by 1H NMR and optical absorption spectroscopy, and supported by density functional theory (DFT) calculations. The copolymers exhibit a single optical absorption band that lies between dithienosilole and benzotriazole homopolymers, which shifts with varying donor–acceptor content. A chain extension experiment using a partially consumed benzotriazole solution as a macroinitiator followed by addition of dithienosilole leads to the synthesis of a statistical dithienosilole–benzotriazole block copolymer from a pure benzotriazole block, demonstrating that both chain extension and simultaneous monomer incorporation are possible using this methodology.
Metal‐containing polymer hydrogels have attracted increasing interest in recent years due to their outstanding properties such as biocompatibility, recoverability, self‐healing, and/or redox activity. In this short review, methods for the preparation of metal‐containing polymer hydrogels are introduced and an overview of these hydrogels with various functionalities is given. It is hoped that this short update can stimulate innovative ideas to promote the research of metal‐containing hydrogels in the communities.
Supramolecular polyfluorenol enable assembly into conjugated polymer nanoparticles (CPNs). Poly{9‐[4‐(octyloxy)phenyl]fluoren‐9‐ol‐2,7‐diyl} (PPFOH)‐based supramolecular nanoparticles are prepared via reprecipitation. PPFOH nanoparticles with diameters ranging from 40 to 200 nm are obtained by adding different amounts of water into DMF solution. Size‐dependent luminescence is observed in PPFOH‐based hydrogen‐bonded nanoparticles that is different from that of poly(9,9‐dioctylfluorenes). Finally, white light‐emitting devices using CPNs with a size of 80 nm exhibit white emission with the CIE coordinates (0.31, 0.34). Amphiphilic conjugated polymer nanoparticles are potential organic nano‐inks for the fabrication of organic devices in printed electronics.
The phase behavior of block copolymer based supramolecular complexes polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) and amphiphilic pentadecylphenol (PDP) molecules resembles the phase behavior of conventional block copolymers. Several PS‐b‐P4VP(PDP) complexes are found to self‐assemble into gyroid nanostructures. Typically, the grains are randomly oriented with a maximal size of several micrometers. Here, the orientation of a gyroid PS‐b‐P4VP(PDP) complex upon shearing is reported. It is found that the (111) gyroid lattice direction orients parallel to the shear direction after only several seconds of large amplitude oscillatory shearing. Oriented gyroid complexes can be used as templates for the preparation of metal nanofoams with improved ordering with potentially superior properties.
Hybrid Pt(platinum)/carbon nanopatterns with an extremely low loading level of Pt catalysts derived from block copolymer templates as an alternative type of counter electrodes (CEs) in dye‐sensitized solar cells (DSSCs) are proposed. DSSCs employing hybrid Pt/carbon with tailored configuration as CEs exhibit higher short‐circuit current and conversion efficiencies as well as stability with a lapse of time compared with conventional cells on the basis of sputtered Pt thin films, evidencing that the new class of hybrid nanostructures possess high potential for cost‐effective electrodes in energy conversion devices.
A supramolecular block copolymer is prepared by the molecular recognition of nucleobases between poly(2‐(2‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐SS‐poly(ε‐caprolactone)‐adenine (P(MEO2MA‐co‐OEGMA)‐SS‐PCL‐A) and uracil‐terminated poly(ethylene glycol) (PEG‐U). Because the block copolymer is linked by the combination of covalent (disulfide bond) and noncovalent (A U) bonds, it not only has similar properties to conventional covalently linked block copolymers but also possesses a dynamic and tunable nature. The copolymer can self‐assemble into micelles with a PCL core and P(MEO2MA‐co‐OEGMA)/PEG shell. The size and morphologies of the micelles/aggregates can be adjusted by altering the temperature, pH, salt concentration, or adding dithiothreitol (DTT) to the solution. The controlled release of Nile red is achieved at different environmental conditions.
A novel rod‐containing block copolymer is constructed by supramacromolecular self‐assembly of α‐cyclodextrin and a triblock copolymer with methoxy polyethylene glycol as the flanking chains and the midterm block alternately connected by 2,2‐dimethylolbutyric acid and isophorone diisocyanate. The assembled rod‐containing block copolymer shows an exciting phenomenon of concentration‐ and pH‐dependent morphological switching of well‐defined nanostructures. In the solutions at pH 9.2, spherical micelles, rod‐like micelles, and hydrogel are observed successively with an increase of the concentration. Notably, the rod‐like micelles are composed of spherical segments due to the combination of the crystalline cores of the spherical micelles. In addition, 1D nanostructures with different curvatures from linear rod‐like micelles (pH 9.2) to ring‐shaped micelles (pH 7.5) can be obtained by controlling the pH values of the assembled systems.
Simultaneous coordination‐association and electrostatic‐repulsion interactions play critical roles in the construction and stabilization of enzymatic function metal centers in water media. These interactions are promising for construction and self‐assembly of artificial aqueous polymer single‐chain nanoparticles (SCNPs). Herein, the construction and self‐assembly of dative‐bonded aqueous SCNPs are reported via simultaneous coordination‐association and electrostatic‐repulsion interactions within single chains of histamine‐based hydrophilic block copolymer. The electrostatic‐repulsion interactions are tunable through adjusting the imidazolium/imidazole ratio in response to pH, and in situ Cu(II)‐coordination leads to the intramolecular association and single‐chain collapse in acidic water. SCNPs are stabilized by the electrostatic repulsion of dative‐bonded block and steric shielding of nonionic water‐soluble block, and have a huge specific surface area of function metal centers accessible to substrates in acidic water. Moreover, SCNPs can assemble into micelles, networks, and large particles programmably in response to the solution pH. These unique media‐sensitive phase‐transformation behaviors provide a general, facile, and versatile platform for the fabrication of enzyme‐inspired smart aqueous catalysts.
The unique mechanical performance of nacre, the pearly internal layer of shells, is highly dependent on its complex morphology. Inspired by the structure of nacre, the fabrication of well‐ordered layered inorganic–organic nanohybrids is presented herein. This biomimetic approach includes the use of a block copolymer template, consisting of hydrophobic poly(vinylidene fluoride) (PVDF) lamellae covered with hydrophilic poly(methacrylic acid) (PMAA), to direct silica (SiO2) mineralization. The resulting PVDF/PMAA/SiO2 nanohybrid material resembles biogenic nacre with respect to its well‐ordered and layered nanostructure, alternating organic–inorganic phases, macromolecular template, and mild processing conditions.
Poly (N‐isopropylacrylamide) (pNIPAm)‐based hydrogels and hydrogel particles (microgels) have been extensively studied since their discovery and “popularization” a few decades ago. While their uses seem to have no bounds, this Feature Article is focused on their development and application for sensing small molecules, macromolecules, and biomolecules. Hydrogel/microgel‐based photonic materials with order in one, two, or three dimensions are highlighted, which exhibit optical properties that depend on the presence and concentration of various analytes.
The self‐assembled nanostructures of a high‐molecular‐weight rod–coil block copolymer, poly(styrene‐block‐(2,5‐bis[4‐methoxyphenyl]oxycarbonyl)styrene) (PS‐b‐PMPCS), in p‐xylene are studied. The cylindrical micelles, long segmental cylindrical micelle associates, spherical micelles, and spherical micelle associates are observed with increased copolymer concentration. The high molecular weight of PS leads to the entanglement between PS chains from different micelles, which is the force for supramolecular interactions. Short cylindrical micelles are connected end‐to‐end via this supramolecular chemistry to form long segmental cylindrical micelle associates, analogue to the condensation polymerization process, with direction and saturation. On the other hand, spherical micelles assemble via supramolecular chemistry to form spherical micelle associates, yet without any direction due to their isotropic properties.
