“Design” of Boron‐Based Compounds as Pro‐Nucleophiles and Co‐Catalysts for Indium(I)‐Catalyzed Allyl Transfer to Various Csp3‐Type Electrophiles

We have recently uncovered a general indium(I)‐catalyzed method for allylations and propargylation of acetals and ketals with a water‐ and air‐stable allyl boronate. By using a more reactive allyl borane, we have successfully extended this methodology to the more challenging C C coupling with ethers. Herein, we report an improved methodology for the indium(I)‐catalyzed allylation of acetals and ethers, through combination of the allyl boronate with a commercially available “hard” Lewis acid, B‐methoxy‐9‐BBN (BBN=borabicyclo[3.3.1]nonane), as an effective co‐catalyst. Significantly, our work highlights for the first time the correlation between the Lewis acidity of “electrophilic” boron‐based compounds and their “nucleophilic” reactivity in Csp³–Csp³ couplings, catalyzed by a “soft” low‐oxidation main group metal. In addition, we also report several applications of these methodologies to the selective synthesis of various carbohydrate derivatives.     

Low‐lying singlet excited states of isocyanogen

Recent photofragment fluorescence excitation (PHOFEX) spectroscopy experiments have observed the ùA″ singlet excited state of isocyanogen (CNCN) for the first time. The observed spectrum is not completely assigned and significant questions remain about the excited states of this system. To provide insight into the energetically accessible excited states of CNCN, optimized geometries, harmonic vibrational frequencies, and excitation energies for the first three singlet excited states are determined using equation‐of‐motion coupled‐cluster theory with singles and doubles (EOM‐CCSD) and correlation‐consistent basis sets. Additionally, excited state coupled‐cluster methods which approximate the contributions from triples (CC3) are utilized to estimate the effect of higher‐order correlation on the energy of each excited state. For the ùA″ state, our best estimate for T₀ is about 42,200 cm^?1, in agreement with the experimentally estimated upper limit for the zero‐point level of 42,523 cm^?1. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

High magnetic field solid‐state NMR analyses by combining MAS,MQ‐MAS,homo‐nuclear and hetero‐nuclear correlation experiments

A general strategy of structural analysis of alumina silicate by combining various solid‐state NMR measurements such as single pulse, multi‐quantum magic angle spinning, double‐quantum homo‐nuclear correlation under magic angle spinning (DQ‐MAS), and cross‐polarization hetero‐nuclear correlation (CP‐HETCOR) was evaluated with the aid of high magnetic field NMR (800 MHz for ¹H Larmor frequency) by using anorthite as a model material. The high magnetic field greatly enhanced resolution of ²⁷Al in single pulse, DQ‐MAS, and even in triple‐quantum magic angle spinning NMR spectra. The spatial proximities through dipolar couplings were probed by the DQ‐MAS methods for homo‐nuclear correlations between both ²⁷Al–²⁷Al and ²⁹Si–²⁹Si and by CP‐HETCOR for hetero‐nuclear correlations between ²⁷Al–²⁹Si in the anorthite framework. By combining various NMR methodologies, we elucidated detailed spatial correlations among various aluminum and silicon species in anorthite that was hard to be determined using conventional analytical methods at low magnetic field. Moreover, the presented approach is applicable to analyze other alumina‐silicate minerals. Copyright © 2012 John Wiley & Sons, Ltd.     

NMR studies on 1,2‐dihydro‐2‐(4‐aminophenyl)‐4‐[4‐(4‐aminophenoxy)‐4‐phenyl]‐(2H)phthalazin‐1‐one

An unsymmetrical heterocyclic diamine, 1,2‐dihydro‐2‐(4‐aminophenyl)‐4‐[4‐(4‐aminophenoxy)‐4‐phenyl]‐(2H)phthalazin‐1‐one, was synthesized. Its ¹H and ¹³C NMR spectra were completely assigned by utilizing the two‐dimensional heteronuclear ¹³C–¹H multiple‐bond coherence (HMBC) spectroscopy, and heteronuclear ¹³C–¹H one‐bond correlation spectroscopy, homonuclear shift correlation spectroscopy (H,H‐COSY) and rotating frame Overhauser enhancement spectroscopy (ROESY). The structure of the compound was shown to be the phthalazinone rather than the phthalazine ether from cross peaks and chemical shifts of the protons. Copyright © 2002 John Wiley & Sons, Ltd.     

Deactivation of Cu‐Exchanged Automotive‐Emission NH3‐SCR Catalysts Elucidated with Nanoscale Resolution Using Scanning Transmission X‐ray Microscopy

To gain insight into the underlying mechanisms of catalyst durability for the selective catalytic reduction (SCR) of NO_x with an ammonia reductant, we employed scanning transmission X‐ray microscopy (STXM) to study Cu‐exchanged zeolites with the CHA and MFI framework structures before and after simulated 135 000‐mile aging. X‐ray absorption near‐edge structure (XANES) measurements were performed at the Al K‐ and Cu L‐edges. The local environment of framework Al, the oxidation state of Cu, and geometric changes were analyzed, showing a multi‐factor‐induced catalytic deactivation. In Cu‐exchanged MFI, a transformation of Cu^II to Cu^I and Cu_xO_y was observed. We also found a spatial correlation between extra‐framework Al and deactivated Cu species near the surface of the zeolite as well as a weak positive correlation between the amount of Cu^I and tri‐coordinated Al. By inspecting both Al and Cu in fresh and aged Cu‐exchanged zeolites, we conclude that the importance of the preservation of isolated Cu^II sites trumps that of Brønsted acid sites for NH₃‐SCR activity.     

One‐Pot Synthesis of 4‐(2,3‐Dihydro‐2‐hydroxy‐1,3‐dioxo‐1H‐inden‐2‐yl)‐Substituted 1‐Aryl‐1H‐pyrazole‐3‐carboxylates via a Tandem Three‐Component Reaction

The hitherto unreported, highly functionalized 1H‐pyrazole‐3‐carboxylates 3 have been synthesized in good yields via a one‐pot three‐component domino reaction of phenylhydrazines, dialkyl acetylenedicarboxylates, and ninhydrin under mild conditions for the first time. No co‐catalyst or activator is required for this multicomponent reaction, and the reaction is, from an experimental point of view, simple to perform (Scheme 1). The structures of compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization/addition reaction is proposed (Scheme 2).     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Redox‐State‐Mediated Regulation of Cytochrome c Release in Apoptosis Revealed by Surface‐Enhanced Raman Scattering on Nickel Substrates

The interaction of cytochrome c (Cyt c) with cardiolipin (CL) is believed to play an important role in the initial events of apoptosis. Herein, we investigate the structural changes of CL‐bound Fe²⁺Cyt c and the correlation with Cyt c release through surface‐enhanced Raman spectroscopy (SERS) on nickel substrates. The SERS results together with molecular dynamics simulation reveal that Fe²⁺Cyt c undergoes autoxidation and a relatively larger conformational alteration after binding with CL, inducing higher peroxidase activity of Cyt c and higher permeability of the CL membrane compared with those induced by the Fe³⁺Cyt c. The proapoptotic activity and SERS effect of the Ni nanostructures allow the in situ study of the redox‐state‐dependent Cyt c release from isolated mitochondria, which reveals for the first time that the ferrous state of Cyt c most likely plays a more important role in triggering apoptosis.     

Safe,Low‐Cost,Fast‐Kinetics and Low‐Strain Inorganic‐Open‐Framework Anode for Potassium‐Ion Batteries

A key challenge for potassium‐ion batteries is to explore low‐cost electrode materials that allow fast and reversible insertion of large‐ionic‐size K⁺. Here, we report an inorganic‐open‐framework anode (KTiOPO₄), which achieves a reversible capacity of up to 102 mAh g^?1 (307 mAh cm^?3), flat voltage plateaus at a safe average potential of 0.82 V (vs. K/K⁺), a long lifespan of over 200 cycles, and K⁺‐transport kinetics ≈10 times faster than those of Na‐superionic conductors. Combined experimental analysis and first‐principles calculations reveal a charge storage mechanism involving biphasic and solid solution reactions and a cell volume change (9.5 %) even smaller than that for Li⁺‐insertion into graphite (≈10 %). KTiOPO₄ exhibits quasi‐3D lattice expansion on K⁺ intercalation, enabling the disintegration of small lattice strain and thus high structural stability. The inorganic open‐frameworks may open a new avenue for exploring low‐cost, stable and fast‐kinetic battery chemistry.     

Safe,Low‐Cost,Fast‐Kinetics and Low‐Strain Inorganic‐Open‐Framework Anode for Potassium‐Ion Batteries

A key challenge for potassium‐ion batteries is to explore low‐cost electrode materials that allow fast and reversible insertion of large‐ionic‐size K⁺. Here, we report an inorganic‐open‐framework anode (KTiOPO₄), which achieves a reversible capacity of up to 102 mAh g^?1 (307 mAh cm^?3), flat voltage plateaus at a safe average potential of 0.82 V (vs. K/K⁺), a long lifespan of over 200 cycles, and K⁺‐transport kinetics ≈10 times faster than those of Na‐superionic conductors. Combined experimental analysis and first‐principles calculations reveal a charge storage mechanism involving biphasic and solid solution reactions and a cell volume change (9.5 %) even smaller than that for Li⁺‐insertion into graphite (≈10 %). KTiOPO₄ exhibits quasi‐3D lattice expansion on K⁺ intercalation, enabling the disintegration of small lattice strain and thus high structural stability. The inorganic open‐frameworks may open a new avenue for exploring low‐cost, stable and fast‐kinetic battery chemistry.     

A New Voltammetric Sensor for Hydrazine Based on Michael Addition Reaction Using 1‐Amino‐2‐naphtol‐4‐sulfonic Acid

In this paper, voltammetric determination of hydrazine was investigated by 1‐amino‐2‐naphtol‐4‐sulfonic acid (ANSA) at the surface of carbon paste electrode (CPE) using cyclic voltammetry (CV) and double potential step chronoamperometry. Results showed that in pH 7.00, hydrazine participates in Michael addition reaction with ANSA and the anodic peak potential of hydrazine shifted to 726 mV less positive than CPE in absence of ANSA, this value is unique compared with other research works. Also, the value of rate constant for the oxidation of hydrazine was calculated 8.3 × 10⁴ cm³ mol^‐1 s^‐1 and the diffusion coefficient of ANSA at the surface of CPE was determined 7.3 × 10^‐7 cm² s^‐1. A linear correlation between Ip and hydrazine concentration in the ranges, from 5 × 10^‐5 mol/L to 2.5 × 10^‐2 mol/L with CV method was obtained and the detection limit was found as 4.3 × 10^‐5 mol/L.     

Focal‐point anchoring: Large proton relaxivity observed for gadolinium‐cored dendrimer complexes in water

Water‐soluble Gd³⁺‐cored poly(ether amide) dendrimer complexes, bearing a diethylenetriaminepentaacetic acid Gd³⁺ complex (GdDTPA) core, were synthesized. The longitudinal proton relaxivity (R₁), governed mainly by the rotation correlation time of the paramagnetic Gd³⁺ center, was measured in water (37 °C, 20 MHz). An anchor effect at the focal point of the hydrophilic dendrimer was experimentally evaluated for the first time, through a comparison of the R₁ values with the ones reported for various Gd³⁺ complexes, including linear copolymers of GdDTPA linked by various lengths of aliphatic chains via amide bonds. Unusually large R₁ values for the first‐ and second‐generation Gd³⁺‐cored dendrimer complexes (6.1 and 9.3 mM^?1 s^?1, respectively), even with relatively low molecular weights (1355 and 3877, respectively), suggested a remarkable increase in the local rigidity around the GdDTPA core. The internal rigidity of the dendrimer was supposed to take advantage of the increased nominal molecular weight in water via multihydration to the dendron to increase the rotation correlation time, and this resulted in the observed R₁ gain. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2680–2689, 2004     

Room‐Temperature Ferroelectric Material Composed of a Two‐Dimensional Metal Halide Double Perovskite for X‐ray Detection

Although two‐dimensional (2D) metal–halide double perovskites display versatile physical properties due to their huge structural compatibility, room‐temperature ferroelectric behavior has not yet been reported for this fascinating family. Here, we designed a room‐temperature ferroelectric material composed of 2D halide double perovskites, (chloropropylammonium)₄AgBiBr₈, using an organic asymmetric dipolar ligand. It exhibits concrete ferroelectricity, including a Curie temperature of 305 K and a notable spontaneous polarization of ≈3.2 μC cm^?2, triggered by dynamic ordering of the organic cation and the tilting motion of heterometallic AgBr₆/BiBr₆ octahedra. Besides, the alternating array of inorganic perovskite sheets and organic cations endows large mobility‐lifetime product (μτ=1.0×10^?3 cm² V^?1) for detecting X‐ray photons, which is almost tenfold higher than that of CH₃NH₃PbI₃ wafers. As far as we know, this is the first study on an X‐ray‐sensitive ferroelectric material composed of 2D halide double perovskites. Our findings afford a promising platform for exploring new ferroelectric materials toward further device applications.     

4‐Aminopyridinium 2‐(anthracen‐9‐yl)‐3‐oxo‐3H‐inden‐1‐olate monohydrate

The title compound, 2C₅H₇N₂⁺·2C₂₃H₁₃O₂⁻·H₂O, formed as a by‐product in the attempted synthesis of a nonlinear optical candidate molecule, contains two independent 4‐aminopyridinium cations and 2‐(anthracen‐9‐yl)‐3‐oxo‐3H‐inden‐1‐olate anions with one solvent water molecule. This is the first reported structure containing these anions. The two anions are not planar, having different interplanar angles between the anthracenyl and inden‐1‐olate moieties of 59.07 (5) and 83.92 (5)°. The crystal packing, which involves strong classical hydrogen bonds and one C—H...π interaction, appears to account for both the nonplanarity and this difference.     

First‐order correlation‐kinetic contribution to Kohn–Sham exchange charge density function in atoms,using quantal density functional theory approach

Using the static exchange‐correlation charge density concept, the total integrated exchange‐charge density function is calculated within the nonrelativistic spin‐restricted exchange‐only (i) optimized effective potential model, and (ii) nonvariational local potential derived from the exchange‐only work potential within the quantal density functional theory, for the ground‐state isoelectronic series: Ga⁺, Zn, Cu^?; In⁺, Cd, Ag^?; and Tl⁺, Hg, Au^?. The difference between the exchange charge density function derived from these potentials is employed to evaluate the first‐order correlation‐kinetic contribution to the integrated exchange charge density. This contribution is found to be important for both the intra‐ and inter‐shell regions. Screening effects on the contribution due to the nd¹⁰ (n = 3–5) subshells are discussed through comparisons with similar calculations on Ca, Sr, and Ba, wherein nd¹⁰ electrons are absent. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Enhancing NMR Sensitivity of Natural‐Abundance Low‐γ Nuclei by Ultrafast Magic‐Angle‐Spinning Solid‐State NMR Spectroscopy

Although magic‐angle‐spinning (MAS) solid‐state NMR spectroscopy has been able to provide piercing atomic‐level insights into the structure and dynamics of various solids, the poor sensitivity has limited its widespread application, especially when the sample amount is limited. Herein, we demonstrate the feasibility of acquiring high S/N ratio natural‐abundance ¹³C NMR spectrum of a small amount of sample (≈2.0 mg) by using multiple‐contact cross polarization (MCP) under ultrafast MAS. As shown by our data from pharmaceutical compounds, the signal enhancement achieved depends on the number of CP contacts employed within a single scan, which depends on the T_1ρ of protons. The use of MCP for fast 2D ¹H/¹³C heteronuclear correlation experiments is also demonstrated. The significant signal enhancement can be greatly beneficial for the atomic‐resolution characterization of many types of crystalline solids including polymorphic drugs and nanomaterials.     

OH‐Initiated Photooxidations of 1‐Pentene and 2‐Methyl‐2‐propen‐1‐ol: Mechanism and Yields of the Primary Carbonyl Products

The products of the gas‐phase reactions of OH radicals with 1‐pentene and 2‐methyl‐2‐propen‐1‐ol (221MPO) at T=298±2 K and atmospheric pressure were investigated by using a 4500 L atmospheric simulation chamber that was built especially for this work. The molar yield of butyraldehyde was 0.74±0.12 mol for the reaction of 1‐pentene. This work provides the first product molar yield determination of formaldehyde (0.82±0.12 mol), 1‐hydroxypropan‐2‐one (0.84±0.13 mol), and methacrolein (0.078±0.012 mol) from the reaction of 221MPO with OH radicals. The mechanism of this reaction is discussed in relation to the experimental results. Additionally, taking into consideration the complex mechanism, the rate coefficients of the reactions of OH with formaldehyde, 1‐hydroxypropan‐2‐one, and methacrolein were derived at atmospheric pressure and T=298±2 K.; the obtained values were (8.9±1.6)×10^?12, (2.4±1.4)×10^?12, and (22.9±2.3)×10^?12 cm³ molecule^?1 s^?1, respectively.     

Cyclodextrin‐overhanging hyperbranched core‐double‐shell miktoarm architectures: Synthesis and gradient stimuli‐responsive properties

We report the synthesis and gradient stimuli‐responsive properties of cyclodextrin‐overhanging hyperbranched core‐double‐shell miktoarm architectures. A ionic hyperbranched poly(β‐cyclodextrin) (β‐CD) core was firstly synthesized via a convenient “A₂+B₃” approach. Double‐layered shell architectures, composed of poly(N‐isopropyl acrylamide) (PNIPAm) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) miktoarms as the outermost shell linked to poly(N,N‐diethylaminoethyl methacrylate) (PDEAEMA) homoarms which form the inner shell, were obtained by a sequential atom transfer radical polymerization (ATRP) and parallel click chemistry from the modified hyperbranched poly(β‐CD) macroinitiator. The combined characterization by ¹H NMR, ¹³C NMR, ¹H‐²⁹Si heteronuclear multiple‐bond correlation (HMBC), FTIR and size exclusion chromatography/multiangle laser light scattering (SEC/MALLS) confirms the remarkable hyperbranched poly(β‐CD) core and double‐shell miktoarm architectures. The gradient triple‐stimuli‐responsive properties of hyperbranched core‐double‐shell miktoarm architectures and the corresponding mechanisms were investigated by UV–vis spectrophotometer and dynamic light scattering (DLS). Results show that this polymer possesses three‐stage phase transition behaviors. The first‐stage phase transition comes from the deprotonation of PDEAEMA segments at pH 9–10 aqueous solution under room temperature. The confined coil‐globule conformation transition of PNIPAm and PDMAEMA arms gives rise to the second‐stage hysteretic cophase transition between 38 and 44 °C at pH 10. The third‐stage phase transition occurs above 44 °C at pH = 10 attributed to the confined secondary conformation transition of partial PDMAEMA segments. This cyclodextrin‐overhanging hyperbranched core‐double‐shell miktoarm architectures are expected to solve the problems of inadequate functionalities from core layer and lacking multiresponsiveness for shell layers existing in the dendritic core‐multishell architectures. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012