Synthesizing a new dielectric elastomer exhibiting large actuation strain and suppressed electromechanical instability without prestretching

Prestrain provides high actuation performance in dielectric elastomers (DEs) but increases the bulk, mass, and fatigue of the resulting actuators. Based on our experiments on prestrain‐locked interpenetrating polymer films and the model developed by Zhao and Suo, materials with a certain stress–strain relationship should be capable of high strain without prestrain by suppressing electromechanical instability (EMI). Here, we report the synthesis of an acrylic elastomer capable of achieving high actuation performance without prestrain. DE films were directly fabricated by ultraviolet curing of precursors comprising a mixture of acrylate comonomers. Varying the amount of crosslinker comonomer in the precursor allowed us to tune the stress–strain relationship and completely suppress EMI while maintaining high strain performance. Addition of plasticizing agents increased strain sensitivity. The result is a new DE, synthesized from scratch, capable of high actuation strain (>100%), high energy density (>1 J g^?1), and good temperature and frequency response without requiring prestretching. The material can be fabricated using conventional coating techniques and the process can allow for high volume throughput of stacked DE actuators. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Measuring true electromechanical strain of electroactive thermoplastic elastomer gels using synchrotron SAXS

The true electric actuation thickness strain of poly (styrene‐b‐ethylbutylene‐b‐styrene) (SEBS) gel was measured using an in situ synchrotron SAXS. The thermoplastic elastomer SEBS gel was microphase‐separated to form a disordered styrene micelle nanostructure in an oil‐swollen ethylbutylene matrix. The SEBS gel showed reversible cyclic load–unload compression behavior without permanent residual strain. The electromechanical strain of the SEBS gel with carbon paste electrodes could be evaluated by means of a nanostructure dimensional change traced by using the in situ synchrotron SAXS during actuation. The strain measured with SAXS was compared with the strain measured using conventional laser displacement sensor systems. The optical laser sensor method was likely to overestimate the thickness strain due to the bending movement of the dielectric elastomer. To our knowledge, the thickness strain value measured by the synchrotron SAXS is the closest to the true strain ever measured in the field of dielectric elastomer studies, because the nanostructure dimensional change depends on the thickness dimension change, not on the translational movement like the bending motion. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Enhanced dielectric performance of a block copolymer‐polythiophene nanocomposite

Dielectric elastomer actuators (DEAs) transform electrical energy into mechanical work. However, despite displaying exceptional features, the low permittivity of elastomers restricts their application. Hence, to overcome this limitation, DEAs are fabricated by dispersing poly(3‐methylthiophene acetate) (P3TMA), a polarizable conducting polymer, into poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS), a thermoplastic elastomer with excellent mechanical properties. Although high‐quality SEBS:P3TMA films are obtained for all compositions (between 0.5 and 20 wt % P3TMA), their thickness and surface roughness increase with the nano‐sized filler content. Moreover, the conducting particles are well integrated into the SEBS network with no evidence of aggregation or significant change in the mechanical properties of the composites. P3TMA, which forms encapsulated conductive domains within the polymeric matrix, improves the dielectric behavior of SEBS:P3TMA by increasing their dielectric constant with low dielectric losses and no current leakage. Thus, indicating the potential future application of these nanocomposites as elastomer actuators or high energy density capacitors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1896–1905     

Mechanisms of large actuation strain in dielectric elastomers

Subject to a voltage, a dielectric elastomer (DE) deforms. Voltage‐induced strains of above 100% have been observed when DEs are prestretched, and for DEs of certain network structures. Understanding mechanisms of large actuation strains is an active area of research. We propose that the voltage‐stretch response of DEs may be modified by prestretch, or by using polymers with “short” chains. This modification results in suppression or elimination of electromechanical instability, leading to large actuation strains. We propose a method to select and design a DE, such that the actuation strain is maximized. The theoretical predictions agree well with existing experimental data. The theory may contribute to the development of DEs with exceptional performance. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Electroactive methacrylate‐based triblock copolymer elastomer for actuator application

A series of ABA triblock copolymers of methyl methacrylate (MMA) and dodecyl methacrylate (DMA) [poly(MMA‐b‐DMA‐b‐MMA)] (PMDM) were synthesized by Ru‐based sequential living radical polymerization. For this, DMA was first polymerized from a difunctional initiator, ethane‐1,2‐diyl bis(2‐chloro‐2‐phenylacetate) with combination of RuCl₂(PPh₃)₃ catalyst and nBu₃N additive in toluene at 80 °C. As the conversion of DMA reached over about 90%, MMA was directly added into the reaction solution to give PMDM with controlled molecular weight (M_w/M_n ≤ 1.2). These triblock copolymers showed well‐organized morphologies such as body centered cubic, hexagonal cylinder, and lamella structures both in bulk and in thin film by self‐assembly phenomenon with different poly(methyl methacrylate) (PMMA) weight fractions. Obtained PMDMs with 20–40 wt % of the PMMA segments showed excellent electroactive actuation behaviors at relatively low voltages, which was much superior compared to conventional styrene‐ethylene‐butylene‐styrene triblock copolymer systems due to its higher polarity derived from the methacrylate backbone and lower modulus. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Acrylonitrile‐containing polymers via a combination of metal‐catalyzed living radical and nitroxide‐mediated free‐radical polymerization routes

2‐Phenyl‐2‐[(2,2,6,6‐tetramethylpiperidino)oxy] ethyl 2‐bromopropanoate was successfully used as an initiator in consecutive living radical polymerization routes, such as metal‐catalyzed living radical polymerization and nitroxide‐mediated free‐radical polymerization, to produce various types of acrylonitrile‐containing polymers, such as styrene–acrylonitrile, polystyrene‐b‐styrene–acrylonitrile, polystyrene‐b‐poly(n‐butyl acrylate)‐b‐polyacrylonitrile, and polystyrene‐b‐polyacrylonitrile. The kinetic data were obtained for the metal‐catalyzed living radical polymerization of styrene–acrylonitrile. All the obtained polymers were characterized with ¹H NMR, gel permeation chromatography, and differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3374–3381, 2006     

Structure and mechanical properties of talc‐filled blends of polypropylene and styrenic block copolymers

The structure–property relationships of isotactic polypropylene (iPP)/styrenic block copolymer blends filled with talc were examined by optical and scanning electron microscopy, wide‐angle X‐ray diffraction, and tensile‐ and impact strength measurements. The composites were analyzed as a function of the poly(styrene‐b‐ethylene‐co‐propylene) diblock copolymer (SEP) and the poly(styrene‐b‐butadiene‐b‐styrene) triblock copolymer (SBS) content in the range from 0 to 20 vol % as elastomeric components and with 12 vol % of aminosilane surface‐treated talc as a filler. Talc crystals incorporated in the iPP matrix accommodated mostly plane‐parallel to the surface of the samples and strongly affected the crystallization process of the iPP matrix. The SBS block copolymer disoriented plane‐parallel talc crystals more significantly than the SEP block copolymer. The mechanical properties depended on the final phase morphology of the investigated iPP blends and composites and supermolecular structure of the iPP matrix because of the interactivity between their components. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1255–1264, 2004     

Characterization,morphology, thermal and mechanical properties of conductive polyaniline‐functionalized EPDM elastomers obtained by casting

Conductive elastomeric blends based on ethylene–propylene–5‐ethylidene–2‐norbornene terpolymer (EPDM) and polyaniline doped with 4‐dodecylbenzenesulfonic acid [PAni(DBSA)] were cast from organic solvents. Functionalization of the elastomer was promoted by grafting with maleic anhydride. Vulcanization conditions were optimized with an oscillating disk rheometer. The conductivity, morphology, thermal stability, compatibility, and mechanical behavior of the obtained mixtures were analyzed by in situ direct current conductivity measurements, atomic force microscopy, transmission electron microscopy, wide‐angle X‐ray scattering, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical thermal analysis, stress–strain and hysteresis tests. The vulcanization process was affected by temperature, the PAni content, and maleic anhydride. A reinforcement effect was promoted by the vulcanizing agent. The formation of links between the high‐molar‐mass phases and oligomers of PAni(DBSA) in the elastomeric matrix enhanced the thermal stability and ultimate properties of the blends. By the appropriate control of the polymer blends' composition, it was possible to produce elastomeric materials with conductivities in the range of 10^?5–10^?4 S · cm^?1 and excellent mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1767–1782, 2004     

Liquid‐Crystalline Soft Actuators with Switchable Thermal Reprogrammability

Thermal reprogrammability is essential for new‐generation large dry soft actuators, but the realization sacrifices the favored actuation performance. The contradiction between thermal reprogrammability and stability hampers efforts to design high‐performance soft actuators to be robust and thermally adaptable. Now, a strategy has been developed that relies on repeatedly switching on/off thermal reprogrammability in liquid‐crystalline elastomer (LCE) actuators to resolve this problem. By post‐synthesis swelling, a latent siloxane exchange reaction can be induced in the common siloxane LCEs (switching on), enabling reprogramming into on‐demand 3D‐shaped actuators; by switching off the dynamic network by heating, actuation stability is guaranteed even at high temperature (180 °C). Using partially black‐ink‐patterned LCEs, selectively switching off reprogrammability allows integration of completely different actuation modes in one monolithic actuator for more delicate and elaborate tasks.     

Influence of Plasticizers on the Electromechanical Behavior of a P(VDF‐TrFE‐CTFE) Terpolymer: Toward a High Performance of Electrostrictive Blends

This work aims at providing a complete analysis of the effect of plasticizers on the electrostrictive terpolymer performance. To achieve this, several plasticizing agents such as 2‐ethylhexyl phtalate (DEHP), diisononyl phtalate (DINP), and palamoll 652 have been incorporated in the polymer matrix. Experimental results demonstrate that the proposed novel materials exhibited excellent electromechanical enhancement in terms of transverse strain and mechanical energy density under a moderate electric field, which is definitively critical in recent microscale actuation. Another objective of this article was to explore material characteristics as a function of the DINP content, and it was found that the plasticizer weigh fraction was the key parameter determining performance of the modified fluorinate terpolymer blends. Accordingly, it was revealed that high performance flexible actuators can be achieved merely by employing a simple and cheap plasticizer, thus making it possible to overcome the current technological barrier of conventional electroactive polymers that suffer from the high applied electric field usually required to reach sufficient strain. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 355–369     

Effect of tensile load on the actuation performance of pH‐sensitive hydrogels

pH‐responsive hydrogels are capable of converting chemical energy to mechanical work. To optimize their use as actuators, their response when operating against an external load must be fully characterized. Here, the actuation strain of a model pH‐sensitive hydrogel as a function of different constant loads is studied. The experimental actuation strain, produced by switching the pH from 2 to 12, decreases significantly and monotonically with increasing initial tensile load. Two models are developed to predict the actuation strain as a function of applied stress. Simple mechanical models based on the change in hydrogel modulus and cross sectional area due to the change in pH are unsatisfactory as they predict only a small change in actuation strain with increasing external stress. However, the model based on the elastic and mixing free energy functions derived from the Flory–Huggins theory is found to accurately account for the actuation strain as a function of stress. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 218–225     

2H NMR spin relaxation study of the soft segment motion in alternating ethylene–propylene copolymers

We synthesized three partially deuterated polymer samples, namely a poly(ethylene‐alt‐propylene) (EP) alternating copolymer, a poly(styrene‐b‐EP) diblock copolymer (SEP) and a poly(styrene‐b‐EP‐b‐styrene) triblock copolymer (SEPS). The ²H spin–lattice relaxation time, T₁, of EP soft segments above their glass transition temperature was measured by solid‐state ²H NMR spectroscopy. It was found that the block copolymers had a fast and a slow T₁ component whereas EP copolymer had only a fast component. The fast T₁ components for SEP and SEPS are similar to the T₁ value of EP above ca 20°C. The slow T₁ component for SEP and SEPS exhibited a minimum at 60°C and approached the value of the fast component near the T_g of polystyrene. The motional behavior of the EP units for SEP is similar to that of SEPS over the entire range of temperature. Copyright © 2001 John Wiley & Sons, Ltd.     

Synthesis of poly(n‐butyl acrylate) homopolymer and poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) triblock copolymer via AGET emulsion ATRP using a cationic surfactant

Cationic emulsions of triblock copolymer particles comprising a poly(n‐butyl acrylate) (PⁿBA) central block and polystyrene (PS) outer blocks were synthesized by activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP). Difunctional ATRP initiator, ethylene bis(2‐bromoisobutyrate) (EBBiB), was used as initiator to synthesize the ABA type poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) (PS‐PⁿBA‐PS) triblock copolymer. The effects of ligand and cationic surfactant on polymerizations were also discussed. Gel permeation chromatography (GPC) was used to characterize the molecular weight (M_n) and molecular weight distribution (MWD) of the resultant triblock copolymers. Particle size and particle size distribution of resulted latexes were characterized by dynamic light scattering (DLS). The resultant latexes showed good colloidal stability with average particle size around 100–300 nm in diameter. Glass transition temperature (T_g) of copolymers was studied by differential scanning calorimetry (DSC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 611–620     

Thiol‐acrylate main‐chain liquid‐crystalline elastomers with tunable thermomechanical properties and actuation strain

The purpose of this study was to investigate the influence of cross‐linking on the thermomechanical behavior of liquid‐crystalline elastomers (LCEs). Main‐chain LCE networks were synthesized via a thiol‐acrylate Michael addition reaction. The robust nature of this reaction allowed for tailoring of the behavior of the LCEs by varying the concentration and functionality of the cross‐linker. The isotropic rubbery modulus, glass transition temperature, and strain‐to‐failure showed strong dependence on cross‐linker concentration and ranged from 0.9 MPa, 3 °C, and 105% to 3.2 MPa, 25 °C, and 853%, respectively. The isotropic transition temperature (T_i) was shown to be influenced by the functionality of the cross‐linker, ranging from 70 °C to 80 °C for tri‐ and tetra‐functional cross‐linkers. The magnitude of actuation can be tailored by controlling the amount of cross‐linker and applied stress. Actuation increased with increased applied stress and decreased with greater amounts of cross‐linking. The maximum strain actuation achieved was 296% under 100 kPa of bias stress, which resulted in work capacity of 296 kJ/m³ for the lowest cross‐linked networks. Overall, the experimental results provide a fundamental insight linking thermomechanical properties and actuation to a homogenous polydomain nematic LCE networks with order parameters of 0.80 when stretched. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 157–168     

Conductivity of Poly(pyrrole)‐Poly(styrene sulfonate) Core–Shell Nanoparticles

The dielectric properties of poly(styrene) nanoparticles decorated at their surfaces with poly(styrene sulfonate) [PSS] brushes and subsequently loaded with polypyrrole (PPy) were studied. These film‐forming materials which may serve as hole‐injection layers in organic light‐emitting diodes, exhibit a core–shell‐type morphology with a core of electrically insulating poly(styrene) and a shell consisting of a corona of PSS chains which form the matrix in which the electrically conducting complex of PPy and PSS is embedded. This conducting complex exists in form of domains of nanoscale dimensions. Thin compressed pellets of these nanoparticles were studied using mainly impedance spectroscopy. Measurements were carried out in the temperature range between 123 and 453 K and frequency range from 10^?1 to 10⁶ Hz. While earlier studies were centered around the effect of polypyrrole volume fraction on the conductivity films and pellets composed of these nanoparticles, the present study reveals in which way the conductivity can be modified by exchange of the mobile inorganic counter ions of PSS. Besides the free‐acid form (H⁺), the Li⁺‐, Na⁺‐ and Cs⁺‐salts of PSS were investigated. The PPy volume fraction was the same for all PPy/PSS core–shell nanoparticles. The distance for phonon‐assisted hopping between next‐neighbor polypyrrolium chains is influenced by the presence of these inorganic cations. For all samples containing PPy, a transition from insulating to conducting behavior in the range of 300‐350 K was found. Using the fluctuation‐induced tunneling model, the average tunneling distance, as well as the potential energy barrier separating neighboring conducting grains was estimated. Finally, a detailed analysis of the dielectric spectra suggests the localization length of the charge carriers to be about 0.33 nm.     

Polymeric Micelle Assembly for the Smart Synthesis of Mesoporous Platinum Nanospheres with Tunable Pore Sizes

A facile method for the fabrication of well‐dispersed mesoporous Pt nanospheres involves the use of a polymeric micelle assembly. A core–shell–corona type triblock copolymer [poly(styrene‐b‐2‐vinylpyridine‐b‐ethylene oxide), PS‐b‐P2VP‐b‐PEO] is employed as the pore‐directing agent. Negatively charged PtCl₄^2? ions preferably interact with the protonated P2VP⁺ blocks while the free PEO chains prevent the aggregation of the Pt nanospheres. The size of the mesopores can be finely tuned by varying the length of the PS chain. Furthermore, it is demonstrated that the metallic mesoporous nanospheres thus obtained are promising candidates for applications in electrochemistry.     

Facile synthesis and catalytic activity of well‐defined amphiphilic block copolymers based on N‐vinylimidazolium

Well‐defined amphiphilic block copolymers, poly(styrene)‐b‐poly(N‐vinylimidazole) (PS‐b‐PVim), were successfully synthesized by macromolecular design via interchange of the xanthates/reversible addition–fragmentation chain transfer (RAFT) polymerization. The structure of the copolymer based on Vim can be well controlled, and the molecular weight distribution was relatively narrow (PDI = 1.24). The size and morphology of the aggregates of the amphiphilic copolymers were investigated by dynamic light scattering and transmission electron microscope, the results implied that the uniform spheroidal micelles consisting of PS core and PVim corona were assembled, and the catalytic activities of PS‐b‐PVim for the hydrolysis of p‐nitrophenyl acetate at different temperatures were also investigated by high‐performance liquid chromatograph (HPLC); the catalytic activities of diblock copolymers were prominently improved compared with that of PVim homopolymers. Moreover, the catalytic activities of the copolymers followed the Arrhenius behavior in the wide experimental temperature range. Copyright © 2013 John Wiley & Sons, Ltd.     

A polarity‐activation strategy for the high incorporation of 1‐alkenes into functional copolymers via RAFT copolymerization

A new synthetic methodology for the preparation of copolymers having high incorporation of 1‐alkene together with multifunctionalities has been developed by polarity‐activated reversible addition‐fragmentation chain transfer (RAFT) copolymerization. This approach provides well‐defined alternating poly(1‐decene‐alt‐maleic anhydride), expanding the monomer types for living copolymerizations. Although neither 1‐decene (DE) nor maleic anhydride (MAn) has significant reactivity in RAFT homopolymerization, their copolymers have been synthesized by RAFT copolymerizations. The controlled characteristics of DE‐MAn copolymerizations were verified by increased copolymer molecular weights during the copolymerization process. Ternary copolymers of DE and MAn, with high conversion of DE, could be obtained by using additive amounts (5 mol %) of vinyl acetate or styrene (ST), demonstrating further enhanced monomer reactivities and complex chain structures. When ST was selected as the third monomer, copolymers with block structures were obtained, because of fast consumption of ST in the copolymerization. Moreover, a wide variety of well‐defined multifunctional copolymers were prepared by RAFT copolymerizations of various functional 1‐alkenes with MAn. For each copolymerization, gel permeation chromatography analysis showed that the resulting copolymer had well‐controlled M_n values and fairly low polydispersities (PDI = 1.3–1.4), and ¹H and ¹³C NMR spectroscopies indicated strong alternating tendency during copolymerization with high incorporation of 1‐alkene units, up to 50 mol %. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3488–3498, 2008     

Precision synthesis of sustainable thermoplastic elastomers from lysine‐derived monomers

Novel renewable thermoplastic elastomers were synthesized by sequential polymerization of lysine‐ and itaconic acid‐derived monomers. Ring‐opening polymerization of lysine‐based O‐carboxyanhydride monomer using diethylene glycol as an initiator gave well‐defined α,ω‐dihydroxy functionalized lysine‐derived polyesters. The M _n of these polyesters increased with the monomer conversion while retaining relatively narrow molecular weight distributions. Based on the successful controlled polymerization and esterification of α,ω‐dihydroxy with 2‐bromoisobutyryl bromide, the resultant Br‐PL‐Br macroinitiator was used for the atom transfer radical polymerization of N‐phenylitaconimide (PhII). Three poly(N‐phenylitaconimide)‐b‐polyester‐b‐poly(N‐phenylitaconimide) triblock copolymers were prepared containing 12 ? 25 mol% PPhII, as determined by ¹H NMR spectroscopy. The properties of the obtained triblock copolymer are evaluated as high‐performance and renewable thermoplastic elastomer materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 349–355     

Analysis of E. coli soluble proteins by non‐denaturing micro 2‐DE/3‐DE and MALDI‐MS‐PMF

Escherichia coli (strain K‐12)‐soluble proteins were analyzed by nondenaturing micro 2‐DE and MALDI‐MS‐PMF. The reported conditions of nondenaturing IEF in agarose column gels [Jin, Y., Manabe, T., Electrophoresis 2009, 30, 939–948] were modified to optimize the resolution of cellular soluble proteins. About 300 CBB‐stained spots, the apparent molecular masses of which ranged from ca. 6000 to 10 kDa, were detected. All the spots on two reference 2‐DE gels (one for wide mass range and one for low‐molecular‐mass range) were numbered and subjected to MALDI‐MS‐PMF for the assignment of constituting polypeptides. Most of the spots (310 spots out of 329) provided significant match (p<0.05) with polypeptides in Swiss‐Prot database and totally 228 polypeptide species were assigned. Activity staining of enzymes such as alkaline phosphatase and catalases was performed on the 2‐DE gels and the locations of the activity spots matched well with those of the MS‐assigned polypeptides of the enzymes. Most of the polypeptides with subunit information in Swiss‐Prot (119 polypeptides as homo‐multimers and 25 as hetero‐multimers out of the 228), such as pyruvate dehydrogenase complex which is composed of three enzymatic components, were detected at the apparent mass positions of their polymers, suggesting that the proteins were separated retaining their subunit structures. When a nondenaturing 2‐DE gel was vertically cut into 2 mm strips and one of the strips was subjected to a third‐dimension micro SDS‐PAGE (micro 3‐DE), about 190 CBB‐stained spots were detected. The assignment of the polypeptides separated on the 3‐DE gel would further provide information on protein/polypeptide interactions.