Natural macromolecules, i.e., sequence‐controlled polymers, build the basis for life. In synthetic macromolecular chemistry, reliable tools for the formation of sequence‐controlled macromolecules are rare. A robust and efficient chain‐growth approach based on the simultaneous living anionic polymerization of sulfonamide‐activated aziridines for sequence control of up to five competing monomers resulting in gradient copolymers is presented. The simultaneous azaanionic copolymerization is monitored by real‐time 1H NMR spectroscopy for each monomer at any time during the reaction. The monomer sequence can be adjusted by the monomer reactivity, depending on the electron‐withdrawing effect by the sulfonamide (nosyl‐, brosyl‐, tosyl‐, mesyl‐, busyl) groups. This method offers unique opportunities for sequence control by competing copolymerization: a step forward to well‐engineered synthetic polymers with defined microstructures.
In this article, a versatile 2‐D conjugated polymer, PNDTP‐DPP, containing alkylphenyl substituted naphthodithiophene is synthesized and characterized. PNDTP‐DPP exhibits good solubility and crystallinity with a π−π stacking distance of ≈3.7 Å. Investigation of polymer solar cells (PSCs) and organic field‐effect transistors (OFET) demonstrates a promising power conversion efficiency (PCE) of 4.11% and a high hole mobility of up to 0.86 cm2 V–1 s–1, so this is one of the few examples of versatile polymers that show both good field‐effect mobility and PCE.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
A series of novel red phosphorescent polymers is successfully developed through Suzuki cross‐coupling among ambipolar units, functionalized IrIII phosphorescent blocks, and fluorene‐based silane moieties. The photophysical and electrochemical investigations indicate not only highly efficient energy‐transfer from the organic segments to the phosphorescent units in the polymer backbone but also the ambipolar character of the copolymers. Benefiting from all these merits, the phosphorescent polymers can furnish organic light‐emitting diodes (OLEDs) with exceptional high electroluminescent (EL) efficiencies with a current efficiency (ηL) of 8.31 cd A−1, external quantum efficiency (ηext) of 16.07%, and power efficiency (ηP) of 2.95 lm W−1, representing the state‐of‐the‐art electroluminescent performances ever achieved by red phosphorescent polymers. This work here might represent a new pathway to design and synthesize highly efficient phosphorescent polymers.
A new approach to stabilize carbon nanotubes (CNTs) in aqueous solution with a reduction‐responsive water‐soluble polymer is reported. The novel polymer synthesized by a controlled radical polymerization is functionalized with pendant pyrene groups capable of adhering to the surface of CNTs through π–π noncovalent interactions, and labeled with disulfide linkages to exhibit reduction‐responsive cleavage. Upon the cleavage of junction disulfide linkages in a reducing environment, water‐soluble polymers are shed, retaining clean CNT surfaces for electrochemical catalytic reactions.
Metallocenes are organometallic compounds with reversible redox profiles and tunable oxidation and reduction potentials, depending on the metal and substituents at the cyclopentadienyl rings. Metallocenes have been introduced in macromolecules to combine the redox‐activity with polymer properties. There are many examples of such hydrophobic polymer materials, but much fewer water‐soluble examples are found scattered across the polymer literature. However, in terms of drug delivery and other biological applications, water solubility is essential. For this very reason, all the synthetic routes to water‐soluble metallocene containing polymers are collected and discussed here. The focus is on neutral ferrocene‐ and ruthenocene‐containing and charged cobaltocenium‐containing macromolecules (i.e., symmetrical sandwich complexes). The synthetic protocols, self‐assembly behavior, and other benefits of the obtained materials are discussed.
Aggregation‐induced emission (AIE) is an abnormal phenomenon that has sparked great attention for diverse applications in different fields. In particular, the fabrication and biological imaging applications of AIE‐active fluorescent organic nanoparticles (FONs) have become a focus in the emerging and promising fields. A large number of AIE‐active polymeric nanoprobes have recently been fabricated through different strategies. The advances and progress in this direction have also recently been summarized by some groups. However, the fabrication and biomedical applications of AIE‐active FONs based on carbohydrate polymers and AIE‐active dyes are quite rare and limited. In this feature article, the recently reported AIE‐active FONs with different structures and applications based on AIE‐active dyes and carbohydrate polymers are highlighted, and the major current limitations and development tendencies are also discussed.
The molecular weight of an electron donor‐conjugated polymer is as essential as other well‐known parameters in the chemical structure of the polymer, such as length and the nature of any side groups (alkyl chains) positioned on the polymeric backbone, as well as their placement, relative strength, the ratio of the donor and acceptor moieties in the backbone of donor–acceptor (D–A)‐conjugated polymers, and the arrangement of their energy levels for organic photovoltaic performance. Finding the “optimal” molecular weight for a specific conjugated polymer is an important aspect for the development of novel photovoltaic polymers. Therefore, it is evident that the chemistry of functional conjugated polymers faces major challenges and materials have to adopt a broad range of specifications in order to be established for high photovoltaic performance. In this review, the approaches followed for enhancing the molecular weight of electron‐donor polymers are presented in detail, as well as how this influences the optoelectronic properties, charge transport properties, structural conformation, morphology, and the photovoltaic performance of the active layer.
l ‐Ascorbic acid, commonly known as vitamin C and one of the most important biological compounds, is converted to a α,ω‐diene monomer and subsequently polymerized for the first time by acyclic diene metathesis. Various experimental conditions such as polymerization medium, catalyst type, temperature, and monomer/catalyst ratio are studied. The moderate molecular weight polymers are achieved when the polymerizations are conducted under bulk conditions employing the Grubbs first generation (G1) or Hoveyda–Grubbs second generation catalyst (HG‐2). In the solution case, on the other hand, low molecular weight polymers are obtained regardless of the catalyst type. Moreover, when the catalyst performances are compared, it is found that G1 produces the higher molecular weight as well as higher yield polymers with respect to the HG‐2.
To overcome drug delivery issues associated with its short half‐life in vivo, p‐coumaric acid (pCA), a naturally occurring bioactive, has been chemically incorporated into a poly(anhydride‐ester) backbone through solution polymerization. Nuclear magnetic resonance and Fourier transform infrared spectroscopies indicated that pCA was successfully incorporated without noticeable alterations in structural integrity. The polymer's weight‐average molecular weight and thermal properties were determined, exhibiting a molecular weight of over 26 000 Da and a glass transition temperature of 57 °C. In addition, in vitro hydrolytic release studies demonstrated pCA release over 30 d with maintained antioxidant activity, demonstrating the polymer's potential as a controlled release system.
A series of fluorene‐based conjugated polymers containing the aggregation‐induced emissive (AIE)‐active tetraphenylethene and dicarboxylate pseudocrown as a receptor exhibits a unique dual‐mode sensing ability for selective detection of lead ion in water. Fluorescence turn‐off and turn‐on detections are realized in 80%–90% and 20% water in tetrahydrofuran (THF), respectively, for lead ion with a concentration as low as 10−8 m .
Cross‐linked azobenzene liquid‐crystalline polymer films with a poly(oxyethylene) backbone are synthesized by photoinitiated cationic copolymerization. Azobenzene moieties in the film surface toward the light source are simultaneously photoaligned during photopolymerization with unpolarized 436 nm light and thus form a splayed alignment in the whole film. The prepared films show reversible photoinduced bending behavior with opposite bending directions when different surfaces of one film face to ultraviolet light irradiation.
A novel type of emulsion gel based on star‐polymer‐stabilized emulsions is highlighted, which contains discrete hydrophobic oil and hydrophilic aqueous solution domains. Well‐defined phenol‐functionalized core‐crosslinked star polymers are synthesized via reversible addition‐fragmentation chain transfer (RAFT)‐mediated dispersion polymerization and are used as stabilizers for oil‐in‐water emulsions. Horseradish‐peroxidase‐catalyzed polymerization of the phenol moieties in the presence of H2O2 enables rapid formation of crosslinked emulsion gels under mild conditions. The crosslinked emulsion gels exhibit enhanced mechanical strength, as well as widely tunable composition.
This work describes the synthesis of π‐conjugated polymers possessing arylene and 1,3‐butadiene alternating units in the main chain by the reaction of α,β‐unsaturated ester/nitrile containing γ‐H with aromatic/heteroaromatic aldehyde compound. By using 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester as a model monomer, the different polymerization conditions, including catalyst, catalyst amount, and solvent, are optimized. The polymerization of 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester is carried out by refluxing in ethanol for 72 h with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as a catalyst to give a 1,3‐butadiene‐containing π‐conjugated polymer, poly(phenylene‐1,3‐butadiene), in 84.3% yield with and / (PDI) estimated as 6172 and 1.65, respectively. Based on this new methodology, a series of π‐conjugated polymers containing 1,3‐butadiene units with different substituents are obtained in high yields. A possible mechanism is proposed for the polymerization through a six‐membered ring transition state and then a 1,5‐H shift intermediate.
The transition‐metal catalyzed and metal‐free click polymerizations have been developed as powerful tools for the construction of functional polymers with linear and hyperbranched structures. The latter provides a thorough solution for the completely removing metallic residues from the products encountered in the former. Compared to the activated alkyne–azide metal‐free click polymerization, the activated azide–alkyne one is rarely studied. In this Communication, a perfluorophenyl‐activated azide of hexane‐1,6‐diyl‐bis(4‐azido‐2,3,5,6‐tetrafluorobenzoate) is rationally designed and facilely prepared. Through systematical optimization of the reaction conditions, an efficient metal‐free perfluorophenylazide–alkyne polycycloaddition is established, and polytriazoles with high molecular weights (up to 166 000) and excellent solubility are obtained in excellent yields (up to 93%) under mild reaction conditions. Interestingly, the regioselectivity of the reaction could be fine‐tuned by the solvents and diyne monomers. Therefore, this work provides not only a powerful tool for the preparation of functional polytriazoles, but also an attractive method for fine‐tuning their regioregularity.
Side chains play a considerable role not only in improving the solubility of polymers for solution‐processed device fabrication, but also in affecting the molecular packing, electron affinity and thus the device performance. In particular, electron‐donating side chains show unique properties when employed to tune the electronic character of conjugated polymers in many cases. Therefore, rational electron‐donating side chain engineering can improve the photovoltaic properties of the resulting polymer donors to some extent. Here, a survey of some representative examples which use electron‐donating alkylthio and alkoxy side chains in conjugated organic polymers for polymer solar cell applications will be presented. It is envisioned that an analysis of the effect of such electron‐donating side chains in polymer donors would contribute to a better understanding of this kind of side chain behavior in solution‐processed conjugated organic polymers for polymer solar cells.
Cyclic polymers with alternating monomer sequence are synthesized for the first time based on the ring‐closure strategy. Well‐defined telechelic alternating polymers are synthesized by reversible addition–fragmentation chain transfer polymerization by copolymerizing the electron acceptor monomer of N‐benzylmaleimide and donor monomer of styrene with a feed ratio of 1 between them. The corresponding cyclic alternating polymers are then produced by the UV‐induced Diels–Alder click reaction to ring‐close the linear alternating polymer precursors under highly diluted reaction solution.
Polymers with pendant phenoxyl radicals are synthesized and the electrochemical properties are investigated in detail. The monomers are polymerized using ring‐opening metathesis polymerization (ROMP) or free‐radical polymerization methods. The monomers and polymers, respectively, are oxidized to the radical either before or after the polymerization. These phenoxyl radicals containing polymers reveal a reversible redox behavior at a potential of −0.6 V (vs Ag/AgCl). Such materials can be used as anode‐active material in organic radical batteries (ORBs).
Atom transfer radical polymerization (ATRP) is a versatile and robust tool to synthesize a wide spectrum of monomers with various designable structures. However, it usually needs large amounts of transition metal as the catalyst to mediate the equilibrium between the dormant and propagating species. Unfortunately, the catalyst residue may contaminate or color the resultant polymers, which limits its application, especially in biomedical and electronic materials. How to efficiently and economically remove or reduce the catalyst residue from its products is a challenging and encouraging task. Herein, recent advances in catalyst separation and recycling are highlighted with a focus on (1) highly active ppm level transition metal or metal free catalyzed ATRP; (2) post‐purification method; (3) various soluble, insoluble, immobilized/soluble, and reversible supported catalyst systems; and (4) liquid‐liquid biphasic catalyzed systems, especially thermo‐regulated catalysis systems.
The functionalization of zinc oxide (ZnO) nanoparticles by poly(3‐hexylthiophene) (P3HT) brush is completed by the combination of a mussel inspired biomimetic anchoring group and Huisgen cyclo‐addition “click chemistry.” Herein, the direct coupling of an azide modified catechol derivative with an alkyne end‐functionalized P3HT is described. This macromolecular binding agent is used to access core@corona ZnO@P3HT with a stable and homogeneous conjugated organic corona. Preliminary photoluminescence measurement proves an efficient electron transfer from the donor P3HT to the acceptor ZnO nanoparticles upon grafting, thus demonstrating the potential of such a combination in organic electronics.
