Poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA)‐based brush poly(phosphoamidate)s are successfully synthesized by a combination of ring‐opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP) following either a commutative two‐step procedure or a straightforward one‐pot process using Grubbs ruthenium‐based catalysts for tandem catalysis. Compared with the traditional polymerization method, combining ROMP and ATRP in a one‐pot process allows the preparation of brush copolymers characterized by a relatively moderate molecular weight distribution and quantitative conversion of monomer. Moreover, the surface morphologies and aggregation behaviors of these polymers are studied by AFM and TEM measurements.
This communication describes photoresponsive gels, prepared using ring‐opening metathesis polymerization (ROMP), that dissolve upon irradiation with ultraviolet light. Exposure of mixtures of norbornene‐type ROMP monomers and new photoreactive cross‐linkers comprising two norbornene units bound through a chain containing o‐nitrobenzyl esters (NBEs) to well‐known ruthenium carbene catalysts gave cross‐linked polymer networks that swelled in organic solvents or water depending on the structure of the monomer. These gels became homogeneous upon irradiation with UV light, consistent with breaking of the cross‐links through photolysis of the NBE groups. The irradiation time required for homogenization of the gels depended on the cross‐link density and the structure of the photoresponsive cross‐linker.
A convenient synthesis of sustainable polyamides, which contain side groups and stereocenters, starting from the biobased small terpene β‐pinene is reported. The polyamides, which are obtained via the pinene‐based lactam via ring‐opening polymerization, show excellent thermal properties, rendering this approach very interesting for the utilization of novel biobased and structurally significant high‐performance polymers and materials. Polymer masses and yields are shown to be dependent on different parameters, and the stereoinformation of the lactam monomer can thus be transferred into the polymer chain. In addition, another lactam side product can also be transformed to polyamides.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
To obtain materials useful for the biomedical field, toxic catalysts should be removed from the synthetic route of polymerization reactions and of their precursors. Lipase‐catalyzed ring‐opening polymerization and the synthesis of cyclic precursors can be performed with the same catalyst under different conditions. Here, we highlight the use of lipases as catalysts and optimization of their performance for both ring‐closing and ring‐opening polymerization, via varying parameters such as ring size, concentration, substrate molar ratio, temperature, and solvent. While the conditions for ring‐closing reactions and ring‐opening polymerizations of small molecules, such as ε‐caprolactone, have been extensively explored using Candida antarctica lipase B (CALB), the optimization of macrocyclization, especially for more bulky substrates is surveyed here. Finally, recent methods and polymer architectures are summarized with an emphasis on new procedures for more sustainable chemistry, such as the use of ionic liquids as solvents and recycling of polyesters by enzymatic pathways.
The successful chain‐growth copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization employing Cu(0)/pentamethyldiethylenetriamine (PMDETA) and alkyl halide as catalyst is first investigated by a combination of nuclear magnetic resonance, gel‐permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. In addition, the electron transfer mediated “click‐radical” concurrent polymerization utilizing Cu(0)/PMDETA as catalyst is successfully employed to generate well‐defined copolymers, where controlled CuAAC polymerization of clickable ester monomer is progressed in the main chain acting as the polymer backbone, the controlled radical polymerization (CRP) of acrylic monomer is carried out in the side chain. Furthermore, it is found that there is strong collaborative effect and compatibility between CRP and CuAAC polymerization to improve the controllability.
Graphene oxide (GO) is effective in catalyzing a wide variety of organic reactions and a few types of polymerization reactions. No radical chain polymerizations catalyzed by GO have been reported. In this article, we probe the catalytic role and acceleration effect of GO for self‐initiated radical chain polymerizations of acrylic acid (AA) in the presence of GO and a pre‐existing polymer, poly(N‐vinylpyrrolidone) (PVP), from a calorimetric perspective. Gelation experiments and DSC studies show that GO can function as a catalyst to accelerate the radical chain polymerization of AA. Isothermal polymerization kinetic data shows that the addition of GO diminishes the induction periods and increases the polymerization rates, as indicated by the much enhanced overall kinetic rate constants and lowered activation energies. The catalytic effect of GO for the polymerization of AA is attributed to the acidity of GO and the hydrogen bonding interactions between GO and monomer molecules and/or polymers.
This paper reports on the synthesis of well‐defined polyacrylamide‐based nanogels via reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization, highlighting a templateless route for the efficient synthesis of nanogels based on water‐soluble polymers. RAFT dispersion polymerization of acrylamide in co‐nonsolvents of water–tert‐butanol mixtures by chain extension from poly(dimethylacrylamide) shows well‐controlled polymerization process, uniform nanogel size, and excellent colloidal stability. The versatility of this approach is further demonstrated by introducing a hydrophobic co‐monomer (butyl acrylate) without disturbing the dispersion polymerization process.
The synthesis of tetracene‐ and pentacene‐annulated norbornadienes, formed through the Diels–Alder reaction of a dehydroacene with cyclopentadiene is reported. Ring‐opening metathesis polymerization (ROMP) leads to polymers that are investigated with respect to their physical, optical, and electronic properties by gel permeation chromatography (GPC), UV–vis spectroscopy, and cyclic voltammetry. The pentacene‐containing polymer P1 is successfully integrated into an organic field‐effect transistor (OFET); the tetracene‐containing polymer P2 is integrated into an organic light‐emitting diode (OLED).
The modulation of the cloud point of aqueous poly(N,N‐diethylacrylamide) solutions via the formation of supramolecular cyclodextrin complexes with hydrophobic end groups, namely adamantyl, tert‐butyl phenyl and azobenzene, synthesized via RAFT polymerization is described. The dependence of the apparent cloud points after cyclodextrin complexation is investigated with respect to the type and quantity of the guest end group, the polymer chain length and the cyclodextrin/end group ratio. Furthermore, the effect is reversed via the addition of guest molecules or via biocompatible enzymatic degradation of the cyclodextrins entire.
Synthesis of a cyclodextrin (CD) polyrotaxane is achieved for the first time by simultaneous free radical polymerization of isoprene, threading by CD, and stoppering by copolymerization of styrene. This reaction is performed in an eco‐friendly manner in an aqueous medium similar to classical emulsion polymerization. Threaded CD rings of the polyrotaxane are cross‐linked by hexamethylene diisocyanate, leading to highly elastic slide‐ring gels.
Diarylbutadiyne derivatives are ideal monomers for providing the π‐electron‐conjugated system of polydiacetylenes (PDAs). The geometrical parameters for diacetylene topochemical polymerization are known. However, control of the molecules under these parameters is yet to be addressed. This work shows that by simply tailoring diarylbutadiyne with amide side‐chain substituents, the arrangement of the substituents and the resulting hydrogen bond framework allows formation of π‐electron‐conjugated PDA.
Investigation into the mussel‐inspired polymerization of dopamine has led to the realization that other compounds possessing potential quinone structures could undergo similar self‐polymerizations in mild buffered aqueous conditions. To this end, 5‐hydroxyindazole was added to a dopamine polymerization matrix in varying amounts, to study its incorporation into a polydopamine coating of silica particles. Solid‐state 13C NMR spectroscopy confirmed the presence of the indazole in the polymer shell when coated onto silica gel. SEM and DLS analysis also confirmed that the presence of the indazole in the reaction matrix yielded monodisperse polymer‐coated particles, which retained their polymer shell upon HF etching, except when high levels of the indazole were used. Characterization data and examination of incorporation mechanism suggests that the 5‐hydroxyindazole performs the function of a chain‐terminating agent. Cytotoxicity studies of the polymer particles containing 5‐hydroxyindazole showed dramatically lower toxicity levels compared to polydopamine alone.
Micromolding surface‐initiated polymerization enables the fabrication of polymer coatings that reproduce the microscale surface topography of superhydrophobic leaves onto solid supports. Here, the surfaces of superhydrophobic leaves from Trifolium repens and Aristolochia esperanzae are molded and reproduced as the topography of a partially fluorinated polymer coating through the surface‐initiated ring‐opening metathesis polymerization of 5‐(perfluorooctyl)norbornene (NBF8). The polymer coatings have thicknesses exceeding 100 μm, which can be tailored by the amount of monomer added to the mold. These coatings are robustly bound to the substrate, contain compositions not found in nature, and achieve superhydrophobicity that is comparable to the actual leaf.
Polyacrylamides containing pendant aminobisphosphonate groups are synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization and a multicomponent postpolymerization functionalization reaction. A Moedritzer–Irani reaction installs the phosphonic acid groups on well‐defined, RAFT‐generated polymers bearing a pendant amine. An alternate route to the same materials is developed utilizing a three‐component Kabachnik–Fields reaction and subsequent dealkylation. Kinetics of the RAFT polymerization of the polymer precursor are studied. Successful functionalization is demonstrated by NMR and FTIR spectroscopy and elemental analysis of the final polymers.
Enzymatic catalysis and control over macromolecular architectures from reversible addition‐fragmentation chain transfer polymerization (RAFT) are combined to give a new method of making polymers. Horseradish peroxidase (HRP) is used to catalytically generate radicals using hydrogen peroxide and acetylacetone as a mediator. RAFT is used to control the polymer structure. HRP catalyzed RAFT polymerization gives acrylate and acrylamide polymers with relatively narrow molecular weight distributions. The polymerization is rapid, typically exceeding 90% monomer conversion in 30 min. Complex macromolecular architectures including a block copolymer and a protein‐polymer conjugate are synthesized using HRP to catalytically initiate RAFT polymerization.
A commercially available palladium N‐heterocyclic carbene (Pd‐NHC) precatalyst is used to initiate chain‐growth polymerization of 2‐bromo‐3‐hexyl‐5‐trimethylstannylthiophene. The molecular weight of the resultant poly(3‐hexylthiophene) can be modulated (7 to 73 kDa, Đ = 1.14 to 1.53) by varying the catalyst concentration. Mass spectrometry data confirm control over the polymer end groups and 1H NMR spectroscopy reveals that the palladium catalyst is capable of “ring‐walking”. A linear relationship between Mn and monomer conversion is observed. Atomic force microscopy and X‐ray scattering verify the regioregular nature of the resultant polythiophene.
An interesting cooperation between Candida antarctica Lipase B (CAL‐B) and alkaline protease from Bacillus subtilis (BSP) in the copolymerization of bulky ibuprofen‐containing hydroxyacid methyl ester (HAEP) and ε‐caprolactone (ε‐CL) is observed. This cooperation improved the of the polymers from 3130 (CAL‐B) to 9200 g mol–1 (CAL‐B/BSP). Experimental results clearly indicate that CAL‐B mainly catalyzes the ring‐opening polymerization (ROP) of ε‐CL under the initiation of HAEP to form the homopolymer of ε‐CL, while BSP catalyzes the subsequent polycondensation of the ROP product to yield the copolymer with increased molecular weight. Furthermore, using suitable chemo‐enzymatic methods, valuable polyesters with chiral (R)‐ or (S)‐ibuprofen pendants can be tailor‐made.
An acceleration effect and selective monomer addition during RAFT copolymerization of the oppositely‐charged ionic monomers in dilute aqueous solution at 25 °C are reported. The reaction is conducted using a non‐ionic water‐soluble polymer as a macromolecular chain transfer agent under visible light irradiation. A fast iterative polymerization can be induced, even in dilute solution, by the favorable ionic interactions and in situ self‐assembly of zwitterionic growing chains. Selelctive monomer addition is achieved in the statistical copolymerization due to the ion‐pairing of the oppositely‐charged monomers, such as precisely the same reaction rates at a 1:1 of monomer ratio, otherwise a faster reaction of the minor monomer component over the major one. These behaviors open up an avenue towards the rapid synthesis of sequence‐controlled zwitterionic polyelectrolytes that can satisfy the demands of emerging biological applications.
A novel diblock copolymer consisting of poly(vinylferrocene) (PVFc) and poly(N,N‐diethylacrylamide) (PDEA) is synthesized via a combination of anionic and RAFT polymerization. The use of a novel route to hydroxyl‐end‐functionalized metallopolymers in anionic polymerization and subsequent esterification with a RAFT agent leads to a PVFc macro‐CTA ( = 3800 g mol−1; Đ = 1.17). RAFT polymerization with DEA affords block copolymers as evidenced by 1H NMR spectroscopy as well as size exclusion chromatography (6400 ≤ ≤ 33700 g mol−1; 1.31 ≤ Đ 1.28). Self‐assembly of the amphiphilic block copolymers in aqueous solution leads to micelles as shown via TEM. Importantly, the distinct thermo‐responsive and redox‐responsive character of the blocks is probed via dynamic light scattering and found to be individually and repeatedly addressable.
