Synthesis of random polyampholyte brushes by atom transfer radical polymerization

We report the synthesis of random polyampholyte brushes containing 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and methacrylic acid (MAA). The preparation of polyampholyte brushes is performed by the “grafting from” strategy using surface‐initiated atom transfer radical polymerization (ATRP). The first step consists in the formation of the self‐assembled monolayer of the ATRP initiator. Secondly, the chains are grown from the surface by controlled/“living” radical polymerization. The random copolymer brushes and the corresponding homopolymers brushes containing 2‐(dimethylamino)ethyl methacrylate and tert‐butyl methacrylate (^tBuMA) are prepared. The last step is the deprotection of the ^tBuMA form to the MAA segment by in situ hydrolysis reaction. The annealed DMAEMA group can also be converted to the quenched form by in situ quaternization reaction. This results in the formation of “annealed” and “semiannealed” polyampholyte brushes. The “annealed” polyampholyte corresponds to the random copolymer that contains only annealed units, weak acid and weak base. The “semiannealed” polyampholyte consists of the mixture of annealed (weak acid) and quenched (quaternized segment) units. Polyampholyte brushes with various grafting densities are synthesized and carefully characterized using surface techniques such as ellipsometry and FTIR‐ATR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4305–4319, 2008     

表面引发的原子转移自由基聚合法在聚偏二氟乙烯表面制备可控的聚甲基丙烯酸甲酯刷

采用表面引发的原子转移自由基聚合法(ATRP)在聚偏二氟乙烯(PVDF)表面制备结构可控的聚甲基丙烯酸甲酯刷。通过碱处理和紫外光照溴代的方法,将ATRP引入到PVDF表面; 然后采用ATRP法将甲基丙烯酸甲酯接枝到溴代的PVDF表面。采用傅里叶变换红外光谱和X-射线光电子能谱对改性前后PVDF表面的结构进行了表征。结果表明甲基丙烯酸甲酯成功地接枝到了PVDF表面。     

Three‐Arm Star Homo‐ and Block Co‐Polymers Via Atom Transfer Radical Polymerization

Star homopolymers of some vinyl monomers such as methyl methacrylate, n‐butyl methacrylate and styrene (MMA, nBMA, St.) were prepared by using a N,N,N′N′‐tetramethylethylenediamine ligand/CuBr catalytic system via atom transfer radical polymerization (ATRP). A three armed benzene based core was successfully used as initiator. Low polydispersities and regular molecular weight values were obtained in most cases, especially at low conversions. MMA and BMA showed comparable behavior where controlled and true ATRP was observed even at high conversions. However, styrene monomer recorded irregular high polydispersities at high conversions in spite of the relatively low molecular weight values. Some block copolymers were obtained using MMA homopolymer as macroinitiator with the same strategy of ATRP. ¹H‐NMR confirmed the structures of the resulting polymers. Transmission electron microscopy (TEM) proved the nano‐structure of the star polymers. The thermal behavior of the MMA star homo and copolymers was studied. The effect of the star shape on thermal behavior was very clear with respect to the linear ones.     

Packed column reactor for continuous atom transfer radical polymerization: Methyl methacrylate polymerization using silica gel supported catalyst

A continuous column reactor packed with silica gel supported CuBr‐HMTETA catalyst has been successfully developed for ATRP of MMA. The reactor had a good catalytic stability up to 100 h. The MMA conversion decreased with an increasing feeding flow rate. The polymerization kinetics was first order with respect to the monomer. The molecular weight increased linearly with conversion, demonstrating the living character. Possible flow back‐mixing and polymer trapping in the pores of silica gel caused some broadening in the molecular weight distribution. This type of packed column reactor is believed to be a significant development for possible commercial exploitation of the ATRP process.     

Synthesis of densely grafted comblike copolymers

Densely grafted copolymers were synthesized using the “grafting from” approach via the combination of reversible addition‐fragment chain transfer polymerization (RAFT) and atom transfer radical polymerization (ATRP). First, a novel functional monomer, 2,3‐di(2‐bromoisobutyryloxy)ethyl acrylate (DBPPA), with two initiating groups for ATRP was synthesized. It was then polymerized via RAFT polymerization to give macroinitiators for ATRP with controlled molecular weights and narrow molecular weight distributions. Last, ATRP of styrene was carried out using poly(DBPPA)s as macroinitiators to prepare comblike poly(DBPPA)‐graft‐polystyrenes carrying double branches in each repeating unit of backbone via “grafting from” approach. Furthermore, poly(DBPPA)‐graft‐[polystyrene‐block‐poly(t‐BA)]s and their hydrolyzed products poly(DBPPA)‐graft‐[polystyrene‐block‐poly(acrylic acid)]s were also successfully prepared. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 362–372, 2008     

Preparation of poly(methyl methacrylate) grafted hydroxyapatite nanoparticles via reverse ATRP

Surface-initiated reverse atom transfer radical polymerization (reverse ATRP) technical was successfully employed to modify hydroxyapatite (HAP) nanoparticles with poly(methyl methacrylate) (PMMA). The peroxide initiator moiety for reverse ATRP was covalently attached to the HAP surface through the surface hydroxyl groups. Reverse ATRP of methyl methacrylate (MMA) from the initiator-functionalized HAP was carried out, and the end bromide groups of grafted PMMA initiated ATRP of MMA subsequently. Fourier transformation infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA) and transmission electron microscopy (TEM) were employed to confirm the grafting and to characterize the nanoparticle structure. The grafted PMMA gave HAP nanoparticles excellent dispersibility in MMA monomer. As the amount of grafted PMMA increased, the dispersibility of surface-grafted HAP and the compressive strength of HAP/PMMA composites were improved.     

Dimethyl Dihydroacridines as Photocatalysts in Organocatalyzed Atom Transfer Radical Polymerization of Acrylate Monomers

Development of photocatalysts (PCs) with diverse properties has been essential in the advancement of organocatalyzed atom transfer radical polymerization (O‐ATRP). Dimethyl dihydroacridines are presented here as a new family of organic PCs, for the first time enabling controlled polymerization of challenging acrylate monomers by O‐ATRP. Structure–property relationships for seven PCs are established, demonstrating tunable photochemical and electrochemical properties, and accessing a strongly oxidizing ²PC^.+ intermediate for efficient deactivation. In O‐ATRP, the combination of PC, implementation of continuous‐flow reactors, and promotion of deactivation through addition of LiBr are critical to producing well‐defined acrylate polymers with dispersities as low as 1.12. The utility of this approach is established through demonstration of the oxygen‐tolerance of the system and application to diverse acrylate monomers, including the synthesis of well‐defined di‐ and triblock copolymers.     

Vinylimidazole‐based asymmetric ion pair comonomers: Synthesis,polymerization studies and formation of ionically crosslinked PMMA

Vinylimidazole‐based asymmetric ion pair comonomers ( IPC s) which are free from nonpolymerizable counter ions have been synthesized, characterized and polymerized by free radical polymerization (FRP), atom transfer radical polymerization (ATRP), and reversible addition‐fragmentation chain transfer (RAFT) mediated polymerizations in solution and by dispersion polymerization in water. The asymmetric nature of IPC s is due to the fact that cationic component of these IPCs is derived from vinylimidazole (VIm) and anionic component is derived from either styrenesulfonate (SS) or 2‐acrylamido‐2‐methyl‐1‐propanesulfonate. Although under ATRP, conversions are either very low or negligible, FRP and RAFT produces polymers with high to moderate monomer conversions but with different solubility characteristics. This investigation provides insight to the polymerization behavior of each component of the asymmetric IPCs and also its effects on composition and solubility characteristics of the resulting polymers. The IPCs studied here are high temperature ionic liquid and thus the polymers synthesized from these IPCs are highly ionic in nature and possess very strong intermolecular interactions which makes some of these IPC based polymers completely insoluble in organic and aqueous solvents. This highly ionic interaction is exploited to synthesize ionically crosslinked PMMA. MMA on copolymerization with 5–6 mol % of IPC yielded copolymer which is insoluble in common organic solvents like THF, DMF, etc., unlike homo PMMA. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3260–3273     

Solid‐supported synthesis of well‐defined amphiphilic block copolymer from methacrylates

A new facile method for preparation of an amphiphilic block copolymer via a one‐pot sequential atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) on solid support was developed. As a model homopolymerization for the solid‐supported block copolymerization, ATRPs of MMA and HEMA in toluene and in 2‐butanone/1‐propanol solvent system were carried out, respectively. Crosslinked polystyrene beads bearing 2‐bromoisobutyrate moieties successfully initiated the polymerizations of MMA and HEMA in controlled manner. On the basis of the successful results, the one‐pot synthesis of amphiphilic block copolymer by changing the reaction medium was performed. After the ATRP of MMA in toluene at 90 °C for 1 h, the poly(MMA) formed on the beads were washed by continuous flow of 2‐butanone/1‐propanol under nitrogen with the aid of a glass filter in a U‐shaped glass vessel. Then, 2‐butanone/1‐propanol, copper chloride (I), 2,2′‐bipyridyl, and HEMA were added and heated at 50 °C for 48 h with shaking the vessel, followed by treatment with trifluoroacetic acid to isolate the well‐defined amphiphilic block copolymer, poly(MMA‐b‐HEMA). These demonstrated the feasibility of the present strategy for well‐defined synthesis of amphiphilic block copolymers via a one‐pot procedure. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1990–1997, 2008     

Cuso4‐amine redox‐initiated radical polymerization of methyl methacrylate mediated by a CuCl2 complex: Homogeneous reverse ATRP

Kinetic results of CuSO₄/2,2'‐bipyridine(bPy)‐amine redox initiated radical polymerization of methyl methacrylate (MMA) at 70 to 90 °C in dimethylsulfoxide suggest that such initiation is characteristic of a slow rate and a low initiator efficiency, but tertiary amines exhibit a relatively higher rate. UV‐Vis spectroscopy confirms the alpha‐amino functionality of PMMA chains. CuCl₂/bPy successfully mediates the redox‐initiated radical polymerization of MMA with aliphatic tertiary amines in a fashion of slow‐initiated reverse atom transfer radical polymerization (ATRP), i.e. both the initiator efficiency of aliphatic tertiary amines and the average molecular weight of PMMA increase gradually, while the molecular weight distribution remains narrow but become broader with the conversions. As the PMMA chains contain alpha amino and omega C‐Cl moieties, UV‐induced benzophenone‐initiated radical polymerization and Cu^ICl/bPy‐catalyzed ATRP initiated from PMMA lead to block copolymers from terminal functionalities. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2562‐2578     

Controlled grafting of cellulose esters using SET‐LRP process

Here, we present the first example of application of single‐electron transfer living radical polymerization (SET‐LRP) process to a controlled grafting of cellulose esters, cellulose diacetate (CDA), and cellulose acetate butyrate (CAB). The cellulose ester macroinitiators with various functionality densities have been prepared by acylation of the backbones with 2‐bromoisobutyryl (BrIB) and dichloroacetyl (DCA) groups, respectively. Methacrylate monomers were polymerized using DCA‐functionalized macroinitiators in the presence of pentamethyldiethylene triamine as a ligand. At 30 °C, the reaction is rather slow, reaching about 10% conversion after 3 to 6 h of polymerization, whereas the higher temperature (60 °C) perceptibly speeds up the polymerization so that methyl methacrylate (MMA) conversion is ～30% after 5 h. Graft copolymers with random‐type and diblock‐type grafts having amphiphilic character were also synthesized. For acrylate grafting (BuA and t‐BuA), BrIB‐functionalized macroinitiators are more convenient in a combination with a low concentration of Cu(0) and Me₆TREN as a ligand and polymerization is detectably faster even at the lower temperature than that of MMA. Kinetic studies show “living” character of both the graftings. Important advantages of SET‐LRP, compared with classic ATRP, are (i) higher polymerization rate, (ii) lower extent of recombination of the growing grafts and (iii) negligible coloration of the products with catalytic residua, so that the prepared polymers do not require additional careful purification. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

CuX2络合物催化甲基丙烯酸甲酯的氧化聚合

研究了高氧化态过渡金属卤化物络合物催化甲基丙烯酸甲酯(MMA)的氧化聚合.首先在叔胺类聚合物存在条件下以CuBr2/2,2′-联吡啶(bPy)络合物催化MMA在不同溶剂中的氧化聚合,结果在环己酮中得到PMMA均聚物,CuBr2/bPy同叔胺的氧化还原引发可以忽略.随后在环己酮中分别以不同络合物催化MMA的氧化聚合.结果...     

Synthesis and characteristics of poly(methyl methacrylate‐co‐methacrylic acid)/poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive semi‐hollow latex particles and their application to drug carriers

In this work, the poly(methyl methacrylate‐co‐methacrylic acid)/poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite semi‐hollow latex particles was synthesized by three processes. The first process was to synthesize the poly(methyl methacrylate‐co‐methacrylic acid) (poly (MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. The second process was to polymerize methacrylic acid (MAA), N‐isopropylacrylamide (NIPAAm), and crosslinking agent, N,N′‐methylenebisacrylamide, in the presence of poly(MMA‐MAA) latex particles to form the linear poly(methyl methacrylate‐co‐methacrylic acid)/crosslinking poly(methacrylic acid‐co‐N‐isopropylacrylamide) (poly(MMA‐MAA)/poly(MAA‐NIPAAm)) core–shell latex particles with solid structure. In the third process, part of the linear poly(MMA‐MAA) core of core–shell latex particles was dissolved by ammonia to form the poly(MMA‐MAA)/poly(MAA‐NIPAAm) thermosensitive semi‐hollow latex particles. The morphologies of the semi‐hollow latex particles show that there is a hollow zone between the linear poly(MMA‐MAA) core and the crosslinked poly(MAA‐NIPAAm) shell. The crosslinking agent and shell composition significantly influenced the lower critical solution temperature of poly(MMA‐MAA)/poly(MAA‐NIPAAm) semi‐hollow latex particles. Besides, the poly(MMA‐MAA)/poly(MAA‐NIPAAm) thermosensitive semi‐hollow latex particles were used as carriers to load with the model drug, caffeine. The processes of caffeine loaded into the semi‐hollow latex particles appeared four situations, which was different from that of solid latex particles. In addition, the phenomenon of caffeine released from the semi‐hollow latex particles was obviously different from that of solid latex particles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3441–3451     

Ambient temperature ATRP of benzyl methacrylate as a tool for the synthesis of block copolymers with styrene

The rapid atom transfer radical polymerization (ATRP) of benzyl methacrylate (BnMA) at ambient temperature was used to synthesize block copolymers with styrene as the second monomer. Various block copolymers such as AB diblock, BAB symmetric and asymmetric triblock, and ABABA pentablock copolymers were synthesized in which the polymerization of one of the blocks namely BnMA was performed at ambient temperature. It is demonstrated that the block copolymerization can be performed in a controlled manner, regardless of the sequence of monomer addition via halogen exchange technique. Using this reaction condition, the composition (ratio) of one block (here BnMA) can be varied from 1 to 100. It is further demonstrated that in the multiblock copolymer syntheses involving styrene and benzyl methacrylate, it is better to start from the PS macroinitiator compared with PBnMA macroinitiator. The polymers synthesized are relatively narrow dispersed (<1.5). It is identified that the ATRP of BnMA is limited to certain molecular weights of the PS macroinitiator. Additionally, a preliminary report about the synthesis of the block copolymer of BnMA‐methyl methacrylate (MMA), both at ambient temperature, is demonstrated. Subsequent deprotection of the benzyl group using Pd/C? H₂ results in methacrylic acid (MAA)–methyl methacrylate (MAA–MMA) amphiphilic block copolymer. GPC, IR, and NMR are used to characterize the synthesized polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2848–2861, 2006     

Incorporation of poly(2‐acrylamido‐2‐methyl‐N‐propanesulfonic acid) segments into block and brush copolymers by ATRP

2‐Acrylamido‐2‐methyl‐N‐propanesulfonic acid (AMPSA) was successfully polymerized via atom transfer radical polymerization (ATRP) using a copper chloride/2,2′‐bipyridine (bpy) catalyst complex after in situ neutralization of the acidic proton in AMPSA with tri(n‐butyl)amine (TBA). A 5 mol % excess of TBA was required to completely neutralize the acid and prevent protonation of the bpy ligand, as well as to avoid side reactions caused by large excess of TBA. The use of activators generated by electron transfer (AGET) ATRP with ascorbic acid as reducing agent resulted in both increased conversion of the AMPSA monomer during polymerization (up to 50% with a 0.8 [ascorbic acid]/[Cu(II)] ratio) and much shorter polymerization times (<30 min). Block copolymers and molecular brushes containing AMPSA side chains were prepared using this method, and the solution and surface behavior of these materials were investigated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5386–5396, 2009     

Characterization of patterned poly(methyl methacrylate) brushes under various structures upon solvent immersion

In this paper we describe a graft polymerization/solvent immersion method for generating various patterns of polymer brushes. We used a very-large-scale integration (VLSI) process and oxygen plasma system to generate well-defined patterns of polymerized methyl methacrylate (MMA) on patterned Si(1 0 0) surfaces through atom transfer radical polymerization (ATRP). After immersion of wafers presenting lines of these PMMA brushes in water and tetrahydrofuran, we observed mushroom- and brush-like regimes through grafting densities and surface coverages, respectively, for the PMMA brushes with various pattern resolutions. In the mushroom-like regime, the distance between lines of PMMA brushes was smaller than that of the lines patterned lithographically on the wafer; in the brush-like regime, this distance was approximately the same. This new strategy allows polymer brushes to be prepared through graft polymerization and then have their patterns varied through solvent immersion.     

Tailoring of polymers by combination of ionic and radical controlled polymerizations

Poly(methyl methacrylate)s with terminal bromine atom, prepared by bromination of anionically polymerized MMA, were used as ATRP macroinitiators giving di- and triblock copolymers with MMA, styrene and butyl acrylate blocks. Multifunctional ATRP macroinitiators were synthesized by introducing bromomethyl or 2-bromoacyloxy groups onto the main chain of polystyrene or poly(4-methyl styrene) and used for ATRP grafting of tert-butyl acrylate leading to densely grafted copolymers with more or less uniform grafts.     

Are o‐nitrobenzyl (meth)acrylate monomers polymerizable by controlled‐radical polymerization?

We report on the controlled‐radical polymerization of the photocleavable o‐nitrobenzyl methacrylate (NBMA) and o‐nitrobenzyl acrylate (NBA) monomers. Atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer polymerization (RAFT), and nitroxide‐mediated polymerization (NMP) have been evaluated. For all methods used, the acrylate‐type monomer does not polymerize, or polymerizes very slowly in a noncontrolled manner. The methacrylate‐type monomer can be polymerized by RAFT with some degree of control (PDI ∼ 1.5) but leading to molar masses up to 11,000 g/mol only. ATRP proved to be the best method since a controlled‐polymerization was achieved when conversions are limited to 30%. In this case, polymers with molar masses up to 17,000 g/mol and polydispersity index as low as 1.13 have been obtained. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6504–6513, 2009     

Grafting of regenerated cellulose membrane by surface‐initiated atom transfer radical polymerization and its pH‐resposive behavior

Regenerated cellulose (RC) membranes which have pH modulated permeability have been prepared by anchoring the hydroxyl groups on the membrane surface with 2‐bromoisobutyryl bromide, followed by grafting with acrylic acid (AA) using atom transfer radical polymerization (ATRP). The obtained membranes were analyzed by X‐ray photoelectron spectroscopy (XPS), Fourier transform infrared attenuated total reflection spectrometer (ATR‐FTIR), scanning electron microscopy (SEM), TGA and the results showed that AA had been grafted onto the membrane surfaces successfully. Then the pH modulated permeability properties were tested by water flux measurement. All results show that the pH modulated permeability properties of a RC membrane can be obtained by surface‐initiated ATRP. Copyright © 2010 John Wiley & Sons, Ltd.     

Study on the polymerizations of methyl methacrylate and styrene initiated with chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine

Methyl methacrylate (MMA) and styrene (St) have been radically polymerized in the presence of chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine (Me₃SiCl/CuCl/PMDETA). An analysis of the resultant polymers by ¹H NMR discloses terminal silyl group and chlorine atom in all the obtained polymers. Kinetics studies have been carried out by measuring monomer conversions and polymer molecular weights against polymerization time. The results indicate that, for both MMA and St polymerizations, the monomer conversions exhibit a quasi-linear relationship with polymerization time, and the polymer number-average molecular weight (M_n) also increases with monomer conversion. The molecular weights of both PS and PMMA exceed one hundred thousand. Regardless of molecular weight, all the polymers show narrow molecular distributions (M_w/M_n = 1.2-1.5). These polymerization reactions are speculated to follow a mechanism similar to that of atom transfer radical polymerization (ATRP).