Bilayer thickness in unilamellar extruded 1,2-dimyristoleoyl and 1,2-dierucoyl phosphatidylcholine vesicles: SANS contrast variation study of cholesterol effect

Small-angle neutron scattering on extruded unilamellar vesicles in water was used to study bilayer thickness when cholesterol (CHOL) was added at 44.4 mol% to 1,2-dimyristoleoylphosphatidylcholine (diC14:1PC) and 1,2-dierucoylphosphatidylcholine (diC22:1PC) bilayers. Using the (1)H(2)O/(2)H(2)O contrast variation and the small-angle form of Kratky-Porod approximation, the bilayer gyration radii at infinite contrast R(g,infinity) and the bilayer thickness parameters d(g,infinity) = 12(0.5)R(g,infinity) were obtained at 30 degrees C. Addition of cholesterol to diC14:1PC increased the d(g,infinity) from 3.72 +/- 0.02 to 4.26 +/- 0.01 nm, while in the diC22:1PC bilayers the d(g,infinity) change observed was within the experimental error: +0.23 +/- 0.23 nm.     

Studies on dodecyl betainate in combination with its degradation products or with phosphatidyl choline-phase behavior and hemolytic activity

Surface active betaine esters contain a hydrolysable bond and give naturally occurring products (fatty alcohol and the amino acid betaine) on degradation. They are therefore interesting candidates for use as cationic surfactants in pharmaceutical applications. In this work the phase behavior of two systems of relevance for the utilization of dodecyl betainate as a pharmaceutical excipient is studied, namely dodecyl betainate/dodecanol/betaine hydrochloride/D2O and dodecyl betainate/phosphatidyl choline (PC)/ethanol/D2O. The techniques used for phase characterisation were 2H NMR measured on the solvent, small angle X-ray spectroscopy and optical microscopy. Dilute dodecyl betainate/PC dispersions were characterized using laser diffraction. It is shown that introduction of relatively small amounts of the hydrolysis products of dodecyl betainate, i.e., dodecanol and betaine (used in the form of betaine hydrochloride), has a strong effect on the phase behavior of the binary dodecyl betainate/D2O system. The degradation products change the average curvature of the surfactant film so that, instead of a hexagonal phase at concentrations above the micellar phase, a probably defective, lamellar phase seems to form. The dodecyl betainate/PC/ethanol/D2O system shows a large region of a highly swelling lamellar phase. Dispersions of dodecyl betainate/PC/ethanol in water can be prepared with low energy input; i.e., the preconcentrate can be regarded as a self-dispersing solution. Introduction of dodecyl betainate and its degradation products does not impair the ability of PC to form vesicles. Experiments for evaluating the toxicity of surface active betaine esters to erythrocytes were also performed. There are indications that the hemolytic activity of dodecyl betainate is lower than that of the stable surfactant tetradecyltrimethylammonium chloride, which has similar critical micelle concentration. A combination of dodecyl betainate and PC gives very low hemolytic activity.     

Reversed micellar solutions in the system sodium octanoate/decanol/water: Model calculations and dynamic light scattering measurements

Geometrical calculations of aggregate sizes in the reversed micellar solution phase of the system water/sodium octanoate/decanol at 20 °C have been tested by dynamic light scattering studies. The autocorrelation functions were interpreted in the simplest possible way (monodisperse aggregates, Stokes-Einstein diffusion equations) since the geometrical model does not account for detailed changes in shapes or micellar interactions. The model predicts the main features of micellization in these solutions, i. e., the micelles grow continuously as the concentration of water or the molar ratio water/octanoate increases, association begins at quite low concentrations of water and the surrounding decanolic solvent behaves as pure decanol which is saturated with water.     

A new reverse wormlike micellar system: mixtures of bile salt and lecithin in organic liquids

We report a new route for forming reverse wormlike micelles (i.e., long, flexible micellar chains) in nonpolar organic liquids such as cyclohexane and n-decane. This route involves the addition of a bile salt (e.g., sodium deoxycholate) in trace amounts to solutions of the phospholipid lecithin. Previous recipes for reverse wormlike micelles have usually required the addition of water to induce reverse micellar growth; here, we show that bile salts, due to their unique "facially amphiphilic" structure, can play a role analogous to that of water and promote the longitudinal aggregation of lecithin molecules into reverse micellar chains. The formation of transient entangled networks of these reverse micelles transforms low-viscosity lecithin organosols into strongly viscoelastic fluids. The zero-shear viscosity increases by more than 5 orders of magnitude, and it is the molar ratio of bile salt to lecithin that controls the viscosity enhancement. The growth of reverse wormlike micelles is also confirmed by small-angle neutron scattering (SANS) experiments on these fluids.     

Comparative Study on the Structure of Water in Reverse Micelles Stabilized with Sodium Bis(2-ethylhexyl) Sulfosuccinate or Sodium Bis(2-ethylhexyl) Phosphate in n-Heptane

The microstructure of water solubilized in H(2)O/surfactant/n-heptane ternary systems has been investigated by employing (1)H-NMR and FT-IR spectroscopic techniques. Two reverse micellar systems were prepared and studied, i.e., sodium bis(2-ethylhexyl) sulfosuccinate in n-heptane (H(2)O/AOT/n-heptane) and sodium bis(2-ethylhexyl) phosphate in n-heptane (H(2)O/NaDEHP/n-heptane). (1)H-NMR data showed that the chemical shift of water protons for the AOT and NaDEHP reverse micelles varied downfield and upfield, respectively, with an increase of the water content. The opposite shift directions with increasing water content are interpreted as due to a composition change of the solubilized water associated with head-groups and sodium counterions in reverse micellar systems. On the basis of deconvolution results of FT-IR spectra, a four-component model is proposed to interpret the FT-IR and (1)H-NMR results. Copyright 2000 Academic Press.     

Formation of 8-nitroguanine and 8-oxoguanine due to reactions of peroxynitrite with guanine

Reactions of peroxynitrite with guanine were investigated using density functional theory (B3LYP) employing 6-31G** and AUG-cc-pVDZ basis sets. Single point energy calculations were performed at the MP2/AUG-cc-pVDZ level. Genuineness of the calculated transition states (TS) was tested by visually examining the vibrational modes corresponding to the imaginary vibrational frequencies and applying the criterion that the TS properly connected the reactant and product complexes (PC). Genuineness of all the calculated TS was further ensured by intrinsic reaction coordinate (IRC) calculations. Effects of aqueous media were investigated by solvating all the species involved in the reactions using the polarizable continuum model (PCM). The calculations reveal that the most stable nitro-product complex involving the anion of 8-nitroguanine and a water molecule i.e. 8NO(2)G(-) + H(2)O can be formed according to one reaction mechanism while there are two possible reaction mechanisms for the formation of the oxo-product complex involving 8-oxoguanine and anion of the NO(2) group i.e. 8OG + NO(2)(-). The calculated relative stabilities of the PC, barrier energies of the reactions and the corresponding enthalpy changes suggest that formation of the complex 8OG + NO(2)(-) would be somewhat preferred over that of the complex 8NO(2)G(-) + H(2)O. The possible biological implications of this result are discussed.     

A small-angle neutron scattering study of sodium dodecyl sulfate-poly(propylene oxide) methacrylate mixed micelles

Mixed micelle of protonated or deuterated sodium dodecyl sulfate (SDS and SDSd25, respectively) and poly(propylene oxide) methacrylate (PPOMA) are studied by small-angle neutron scattering (SANS). In all the cases the scattering curves exhibit a peak whose position changes with the composition of the system. The main parameters which characterize mixed micelles, i.e., aggregation numbers of SDS and PPOMA, geometrical dimensions of the micelles and degree of ionisation are evaluated from the analysis of the SANS curves. The position q(max) of the correlation peak can be related to the average aggregation numbers of SDS-PPOMA and SDSd25-PPOMA mixed micelles. It is found that the aggregation number of SDS decreases upon increasing the weight ratio PPOMA/SDS (or SDSd25). The isotopic combination, which uses the "contrast effect" between the two micellar systems, has allowed us to determine the mixed micelle composition. Finally, the SANS curves were adjusted using the RMSA for the structure factor S(q) of charged spherical particles and the form factor P(q) of spherical core-shell particle. This analysis confirms the particular core-shell structure of the SDS-PPOMA mixed micelle, i.e., a SDS "core" micelle surrounded by the shell formed by PPOMA macromonomers. The structural parameters of mixed micelles obtained from the analysis of the SANS data are in good agreement with those determined previously by conductimetry and fluorescence studies.     

Effect of static magnetic field on growth of Escherichia coli and relative response model of series piezoelectric quartz crystal

The effect of magnetic field on the growth of bacteria was studied with the series piezoelectric quartz crystal (SPQC) sensing technique. The growth situations of Escherichia coli (E. coli) in the absence and presence of different intensities of static magnetic fields were examined and analyzed. The results showed that the growth of E. coli was inhibited due to the presence of magnetic fields. By fitting frequency shift (deltaD) versus time curves according to the frequency shift response equation of SPQC, the relationships between three kinetic growth parameters, i.e., the asymptote A, the maximum specific growth rate mu(m) and lag time lambda, and magnetic field intensity were established. Based on these results, a new response model containing the magnetic field intensity was derived as: delta(f) = 167.7 (7.25 - 7.11B)/[1 + exp[4 x 2.46e(-3.97B)/(7.25 -7.1 IB)] x (4.42 + 16.46B - t) + 2]] The kinetic parameters of bacterial growth obtained from this model are close to those obtained from the logistics popular growth model, in which the concentration of the bacteria was determined by the traditional pour plate count method.     

Mechanisms of Cytochrome C Extraction by Reverse Micelles

Ｔｈｅｒｅｖｅｒｓｅｍｉｃｅｌｌｅｓａｒｅｗａｔｅｒ ｉｎ ｏｉｌｍｉｃｒｏｅｍｕｌｓｉｏｎｄｒｏｐｌｅｔｓｓｔａｂｉｌｉｚｅｄｂｙａｓｕｒｆａｃｔａｎｔｉｎａｎｏｒｇａｎｉｃｓｏｌｖｅｎｔ .Ｔｈｅｐｏｌａｒｓｕｒｆａｃｔａｎｔｈｅａｄｇｒｏｕｐｓｓｕｒｒｏｕｎｄｓｍａｌｌｗａｔｅｒｐｏｏｌｓｗｉｔｈｉｎｗｈｉｃｈｈｙｄｒｏｐｈｉｌｉｃｍｏｌｅｃｕｌｅｓ,ｓｕｃｈａｓａｍｉｎｏａｃｉｄｓａｎｄｐｒｏｔｅｉｎｓ ,ｃａｎｂｅｓｏｌｕｂｉｌｉｚｅｄ .Ｔｈｅａｐｏｌａｒｓｕｒｆａｃ ｔａｎｔｈｙｄｒｏｃａｒ…     

Short haired wormlike micelles in mixed nonionic fluorocarbon surfactants

We have studied the rheological behavior of viscoelastic wormlike micellar solution in a mixed system of nonionic fluorinated surfactants, perfluoroalkyl sulfonamide ethoxylate, C(8)F(17)SO(2)N(C(3)H(7))(CH(2)CH(2)O)(n)H abbreviated as C(8)F(17)EO(n) (n=10 and 20). Above critical micelle concentration, the surfactant, C(8)F(17)EO(20) forms small spherical micelles in water and the viscosity of the solution remains constant regardless of the shear rate, i.e., the solutions exhibit Newtonian behavior. However, upon successive addition of the C(8)F(17)EO(10) the viscosity of the solution increases and at certain C(8)F(17)EO(10) concentration, shear-thinning behavior is observed indicating the formation wormlike micelles. Contrary to what is expected, there is a viscosity increase with the addition of the hydrophilic C(8)F(17)EO(20) to C(8)F(17)EO(10) aqueous solutions at certain temperature and concentration, which could be attributed to an increase in rigidity of the surfactant layer and to the shifting of micellar branching to higher temperatures. The oscillatory-shear rheological behavior of the viscoelastic solution can be described by Maxwell model at low frequency. Small-angle X-ray scattering (SAXS) measurements confirmed the formation of small spherical micellar aggregates in the dilute aqueous C(8)F(17)EO(20) solution. The SAXS data shows the one-dimensional growth on the micellar size with increase in the C(8)F(17)EO(10) concentration. Thus, the present SAXS data supports the rheological data.     

Tuning the structure of SDS micelles by substituted anilinium ions

The growth behavior of aggregates formed in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) in the presence of the cationic hydrophobic salts o-toluidine hydrochloride (OTHC) and m-toluidine hydrochloride (MTHC) has been studied by dynamic light scattering (DLS) and small-angle neutron scattering (SANS) techniques. DLS studies indicate a progressive growth of SDS micelles with addition of less than equimolar concentrations of hydrophobic salts. A prolate ellipsoidal model is used to analyze the DLS data, which is further supported by SANS measurements. We explain the propensity for the strong growth of micelles in the presence of OTHC and MTHC by the high charge neutralization provided by these salts as the aromatic counterions are adsorbed on the surface of the micelles. When the substitution is at the meta position, i.e., for MTHC, micellar growth is favored at lower salt concentrations than for OTHC. The variation in growth behavior is explained in terms of the difference in the chemical environments of the substituents at the ortho and meta positions. Micellar parameters obtained from SANS data at elevated temperature also support enhanced growth of micelles in the presence of MTHC as compared to OTHC.     

Transport coefficients of aqueous dodecyltrimethylammonium bromide solutions: comparison between experiments, analytical calculations and numerical simulations

We study dynamical properties of ionic species in aqueous solutions of dodecyltrimethylammonium bromide, for several concentrations below and above the critical micellar concentration (cmc). New experimental determinations of the electrical conductivity are given which are compared to results obtained from an analytical transport theory; transport coefficients of ions in these solutions above the cmc are also computed from Brownian dynamics simulations. Analytical calculations as well as the simulation treat the solution within the framework of the continuous solvent model. Above the cmc, three ionic species are considered: the monomer surfactant, the micelle and the counterion. The analytical transport theory describes the structural properties of the electrolyte solution within the mean spherical approximation and assumes that the dominant forces which determine the deviations of transport processes from the ideal behavior (i.e., without any interactions between ions) are hydrodynamic interactions and electrostatic relaxation forces. In the simulations, both direct interactions and hydrodynamic interactions between solutes are taken into account. The interaction potential is modeled by pairwise repulsive 1/r(12) interactions and Coulomb interactions. The input parameters of the simulation (radii and self-diffusion coefficients of ions at infinite dilution) are partially obtained from the analytical transport theory which fits the experimental determinations of the electrical conductivity. Both the electrical conductivity of the solution and the self-diffusion coefficients of each species computed from Brownian dynamics are compared to available experimental data. In every case, the influence of hydrodynamic interactions (HIs) on the transport coefficients is investigated. It is shown that HIs are crucial to obtain agreement with experiments. In particular, the self-diffusion coefficient of the micelle, which is the largest and most charged species in the present system, is enhanced when HIs are included whereas the diffusion coefficients of the monomer and the counterion are roughly not influenced by HIs.     

The role played by salts in the formation of SBA-15, an in situ small-angle X-ray scattering/diffraction study

The influence of salts (NaCl, NaBr, and NaI) on the formation of mesoporous silica SBA-15 was studied in situ by small-angle X-ray scattering and diffraction. Pluronic P104 was used as structure director. The micellar properties and the dynamics of formation were clearly dependent on the presence of salt. It was also shown that the kinetics of mesophase formation, the initial value of the cell parameters, and the extent of long-range order were all influenced by salt additions. The observations are explained to primarily originate from the influence of the anions on the ethylene oxide part of the polymer, i.e., the corona region of the Pluronic micelles. Two effects are identified: a general ion effect causing dehydration of the ethylene oxide part and consequently inducing micellar growth, and a specific ion effect that counterbalances this. The study provides the basis for understanding the means by which addition of simple Na-salts influence the formation of mesoscopically ordered silicas synthesized using nonionic surfactants as structure directors, hence advancing the knowledge base toward a more rational design of mesoporous materials.     

Structure-directing effects in the supramolecular intercluster compound [Au9(PPh3)8]2[V10O28H3]2: long-range versus short-range bonding interactions

Although being composed of trivalent ions, the crystal structure of the supramolecular intercluster compound [Au9(PPh3)8]2[V10O28H3]2 is dominated by short-range intermolecular interactions, i.e., hydrogen bonds, and C-H/pi interactions, avoiding a simple AB-type packing.     

The nature of the micellar stern region as studied by reaction kinetics. 2

The nature of rate-retarding effects of cationic micelles on the water-catalyzed hydrolyses of a series of para-substituted 1-benzoyl-1,2,4-triazoles (1a-f) and 1-benzoyl-3-phenyl-1,2,4-triazole (2) has been studied using kinetic methods. A comparison is drawn between medium effects in the micellar Stern region and in model solutions for the micellar Stern region. Simple model solutions involving concentrated aqueous solutions of a small ionic molecule resembling the surfactant headgroup, as reported before,(1) were improved. New model solutions for alkyltrimethylammonium bromide micelles contain both tetramethylammonium bromide (TMAB), mimicking micellar headgroups, and 1-propanol, mimicking hydrophobic tails. The rate-retarding effect of micelles on the hydrolysis of 1a-f and 2 is caused by the high concentration of headgroups as well as by hydrophobic tails in the Stern region where 1a-f and 2 bind to the micelle. Individual contributions of these interactions are quantified. Rate-retarding effects found for different probes, with different sensitivities for interactions as they occur when the probe binds to the micellar Stern region, as well as the micellar Stern region's micropolarity as reported by the E(T)(30) probe, are satisfactorily reproduced by new model solutions containing both TMAB and 1-propanol.     

Comparison of the crystal structures and magnetic properties of the low- and high-temperature forms of AgCuPO4: crystal structure determination, magnetic susceptibility measurements, and spin dimer analysis

The crystal structure of the low-temperature form of AgCuPO4 (i.e., alpha-AgCuPO4) was determined by powder X-ray diffraction and was compared with that of the high-temperature form of AgCuPO4 (i.e., beta-AgCuPO4). The magnetic properties of the two forms were examined by measuring their magnetic susceptibilities and evaluating the relative strengths of their spin-exchange interactions on the basis of spin-dimer analysis. Both forms of AgCuPO4 have layers of Cu2P2O8 alternating with silver-atom double layers; beta-AgCuPO4 has two Cu2P2O8 layers per unit cell, while alpha-AgCuPO4 has one. The coordinate environment of each Cu2+ ion is close to being a distorted square pyramid in alpha-AgCuPO4, but it is close to being a distorted trigonal bipyramid in beta-AgCuPO4. The magnetic susceptibilities of alpha- and beta-AgCuPO4 are well simulated by an antiferromagnetic alternating-chain model, which leads to J/k(B) = -146.1 K and alphaJ/k(B) = -75.8 K for alpha-AgCuPO4, and J/k(B) = -82.6 K and alphaJ/k(B) = -31.7 K for beta-AgCuPO4 (with the convention in which the spin-exchange parameter between two adjacent spin sites is written as 2J). The spin gaps, delta/k(B), obtained from these parameters are 93.7 K for alpha-AgCuPO4 and 62.3 K for beta-AgCuPO4. The strongest spin exchange in both forms of AgCuPO4 comes from a super-superexchange path, and this interaction is stronger for alpha-AgCuPO4 than for beta-AgCuPO4 by a factor of approximately 2, in good agreement with the experiment. Our analysis supports the use of this model for beta-AgCuPO4 and indicates that the spin lattice of alpha-AgCuPO4 would be better described by a two-dimensional net made up of weakly interacting alternating chains.     

Influence of surface energy distribution on neuritogenesis

PC12 cells are a useful model to study neuronal differentiation, as they can undergo terminal differentiation, typically when treated with nerve growth factor (NGF). In this study we investigated the influence of surface energy distribution on PC12 cell differentiation, by atomic force microscopy (AFM) and immunofluorescence. Glass surfaces were modified by chemisorption: an aminosilane, n-[3-(trimethoxysilyl)propyl]ethylendiamine (C₈H₂₂N₂O₃Si; EDA), was grafted by polycondensation. AFM analysis of substrate topography showed the presence of aggregates suggesting that the adsorption is heterogeneous, and generates local gradients in energy of adhesion. PC12 cells cultured on these modified glass surfaces developed neurites in absence of NGF treatment. In contrast, PC12 cells did not grow neurites when cultured in the absence of NGF on a relatively smooth surface such as poly-l-lysine substrate, where amine distribution is rather homogeneous. These results suggest that surface energy distribution, through cell–substrate interactions, triggers mechanisms that will drive PC12 cells to differentiate and to initiate neuritogenesis. We were able to create a controlled physical nano-structuration with local variations in surface energy that allowed the study of these parameters on neuritogenesis.     

Alanine racemase free energy profiles from global analyses of progress curves

Free energy profiles for alanine racemase from Bacillus stearothermophilus have been determined at pH 6.9 and 8.9 from global analysis of racemization progress curves. This required a careful statistical design due to the problems in finding the global minimum in mean square for a system with eight adjustable parameters (i.e., the eight rate constants that describe the stepwise chemical mechanism). The free energy profiles obtained through these procedures are supported by independent experimental evidence: (1). steady-state kinetic constants, (2). solvent viscosity dependence, (3). spectral analysis of reaction intermediates, (4). equilibrium overshoots for progress curves measured in D(2)O, and (5). the magnitudes of calculated intrinsic kinetic isotope effects. The free energy profiles for the enzyme are compared to those of the uncatalyzed and the PLP catalyzed reactions. At pH 6.9, PLP lowers the free energy of activation for deprotonation by 8.4 kcal/mol, while the inclusion of apoenzyme along with PLP additionally lowers it by 11 kcal/mol.     

Physicochemical studies of pyridinium gemini surfactants with promethazine hydrochloride in aqueous solution

The mixed micellization and interfacial behavior of pyridinium gemini surfactants, 1,1'-(1,1'-(ethane-1,2-diylbis-(sulfanediyl))bis(alkane-2,1-diyl))dipyridinium bromide, i.e., [12-(S-2-S)-12], [14-(S-2-S)-14], [16-(S-2-S)-16] with a phenothiazine tranquilizer drug, promethazine hydrochloride (PMT), has been investigated by conductivity, surface tension and steady state fluorescence measurements. Different spectroscopic techniques like fluorescence, UV-visible and NMR were also employed to understand the nature of interactions between the pyridinium gemini surfactants and PMT. The various micellar, interfacial and associated thermodynamic parameters for different mole fractions of PMT-pyridinium gemini surfactant mixtures have been evaluated. Synergism was observed in the mixed micelle as well as the monolayer formed by these mixtures. The fluorescence quenching experiment indicates that the interactions between PMT and surfactants are hydrophobic in nature. The UV-visible measurements reveal the distinct formation of a drug-surfactant complex. The detailed mechanism for the type of interactions was further studied by NMR titrations which show cation-π interactions between PMT and pyridinium gemini surfactant molecules.