硅胶功能化的N-丙哌嗪固载钯纳米粒子作为有效的多相催化剂用于氰化反应(英文)

An efficient heterogeneous Pd catalytic system has been developed, based on immobilization of Pd nanoparticles (PNPs) on a silica-bonded N-propylpiperazine (SBNPP) substrate. The SBNPP substrate effectively stabilizes the PNPs and improves their stability against aggregation. The catalytic activity of this catalyst was investigated in the cyanation of aryl halides with K4[Fe(CN)6 ] as the cyanide source. The catalyst could be recycled several times without appreciable loss of catalytic activity.     

Palladium nanoparticles supported on poly (N-vinylpyrrolidone)-grafted silica as new recyclable catalyst for Heck cross-coupling reactions

Novel catalytic system based on palladium nanoparticles supported on poly (N-vinylpyrrolidone) (PVP) grafted silica was prepared. Aminopropylsilica was reacted with acryloyl chloride to form acrylamidopropylsilica, and onto this functionalized silica vinylpyrrolidone monomer was polymerized by free-radical polymerization. The complexation of PVP-grafted silica with PdCl₂ was carried out to obtain the heterogeneous catalytic system. X-ray diffraction (XRD) technique and transmission electron microscopy (TEM) image showed that palladium dispersed through the support in nanometer size. This catalytic system exhibited excellent activity in cross-coupling reactions of aryl iodides, bromides and also chlorides with olefinic compounds in Heck-Mizoraki reactions in short reaction time and high yields. Elemental analysis of Pd by inductively coupled plasma (ICP) technique and hot filtration test showed low leaching of the metal into solution from the supported catalyst. The catalyst can be reused several times in repeating Heck reaction cycles without considerable loss in its activity.     

Preparation,characterization and application of silica‐supported palladium complex as a new and heterogeneous catalyst for Suzuki and Sonogashira reactions

An efficient heterogeneous Pd catalytic system has been developed, based on immobilization of Pd nanoparticles (PNPs) on a silica‐bonded propylamine–cyanuric–cysteine (SiO₂–pA–Cyan–Cys) substrate. The synthesized catalyst was characterized by transmission electron microscopy, scanning electron microscopy, FT‐IR, N₂ adsorption analysis (BET), TGA and inductively coupled plasma/atomic emission spectroscopy, and catalytic activity of this catalyst was investigated in the Suzuki and Sonogashira cross‐coupling reactions. The catalysts showed excellent performance in these two reactions, including various aryl halide derivatives (except aryl chloride derivatives) with phenylboronic acid and phenylacetylene under green conditions. Moreover, the catalyst was recycled for several runs without any significant loss of catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Pd/MIL-101的制备及非均相催化吲哚C-H活化

水热合成MIL-101,过量浸渍法吸附Pd(OAc)_2,原位还原Pd~(2+)制得Pd/MIL-101催化剂.采用XRD、XPS、SEM、ICP、HRTEM和N_2吸/脱附实验对其结构进行表征,催化剂Pd纳米粒子尺寸在1.5~2.5 nm之间,含量为1.5%.催化实验表明,Pd/MIL-101能高效催化吲哚C_2位芳基化,对于活性较差的溴代芳烃,也能得到中等以上的收率,催化剂循环5次后仍能保持较高的反应活性,发展了吲哚C_2位衍生物的简单、高效的合成方法.     

Synthesis of highly dispersed Pd/C electro-catalyst with high activity for formic acid oxidation

In this study, we present a simple process to obtain highly dispersed palladium nanoparticles on Vulcan XC-72R carbon support without any protective agent. To obtain high metal loading Pd/C catalyst without any surfactant, we modified the polyol process by employing NH₃ species as a mediation to control the reaction pathway to avoid the precipitation of Pd(OH)₂, and hence the agglomeration of Pd nanoparticles. The obtained Pd/C sample was characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM) techniques. The results show that highly dispersed Pd/C catalyst with an average diameter of 3.0 nm could be obtained in this novel process. The activity of formic acid oxidation on this Pd/C catalyst was examined via cyclic voltammetry technique and it is found that the catalytic activity is greatly enhanced due to the reduced particle size and the improved dispersion of palladium nanoparticles on the carbon surface.     

Pd/PAMAM(聚酰胺-胺)/SBA-15催化剂的制备及催化性能

利用聚酰胺-胺型(PAMAM)树形分子为模板制备出粒径可控的Pd纳米颗粒(Pd DEN),然后通过超声波法制备了SBA-15分子筛负载的Pd/PAMAM复合材料(Pd SDEN)。XRD和TEM测试表明,负载后Pd纳米颗粒的粒径没有变化,且均匀分布在分子筛的孔道中,SBA-15分子筛的结构也没有变化。以对硝基苯酚还原为例,测试了Pd SDEN的催化性能,与Pd DEN相比,其具有更高的催化效率,重复使用5次后仍具有较好的催化活性,反应速率仅下降4%,且Pd/PAMAM复合材料仍能稳定存在于分子筛的孔道中。     

Fe3O4@SiO2-polymer-imid-Pd magnetic porous nanosphere as magnetically separable catalyst for Mizoroki–Heck and Suzuki–Miyaura coupling reactions

The activity of palladium nanoparticles supported on poly (N-vinylpyrrolidone) grafted Fe₃O₄@SiO₂ was investigated in the cross-coupling reactions. We have applied this catalyst under low loading of the supported palladium nanoparticles for the coupling of aryl halides with alkenes (Mizoroki–Heck reaction) and organoboronic acids (Suzuki–Miyaura reaction) in the absence of phosphorous ligands. Short reaction times and excellent yields of the products express the effectiveness of this catalyst. The nanocatalyst can be separated from the reaction mixture by applying a permanent magnet externally and can be reused for six times without appreciable change in catalytic activity. Also, the amount of leaching of Pd nanoparticles has been determined by ICP analysis and results showed low leaching of the metal into solution from the supported catalyst.     

Preparation of Pd/C catalyst for formic acid oxidation using a novel colloid method

A novel colloid method using (WO₃)_n·xH₂O as colloidal source was developed to prepare Pd/C catalyst for formic acid oxidation. Transmission electron microscopy image shows that the Pd/C nanoparticles have an average size of 3.3 nm and a narrow size distribution. Electrochemical measurements indicate that the Pd/C catalyst exhibits significantly high electrochemical active surface area and high catalytic activity with good stability for formic acid oxidation compared with that prepared by common method. The colloid method is very simple and has great potentials for mass-producing Pd/C and others noble metal catalysts.     

Synthesis of N-aryl imidazoles catalyzed by copper nanoparticles on nanosized silica-coated maghemite

A magnetically recoverable catalyst consisting of copper nanoparticles (CuNPs) on nanosized silica-coated maghemite is presented. The catalyst has been prepared under mild conditions by mixing the magnetic support with a freshly prepared suspension of CuNPs obtained by fast reduction of anhydrous CuCl₂ with lithium sand and a catalytic amount of DTBB (4,4′-di-tert-butylbiphenyl) as electron carrier. This copper-based catalyst has shown to be very efficient in the N-(hetero)arylation of imidazole using (hetero)aryl bromides and iodides as arylating agents under ligand-free conditions. The catalyst is easily recovered by means of an external magnet and can be reutilized in three N-arylation cycles without apparent loss of catalytic activity.     

A comparison between two Pd‐Ni catalysts supported on two different supports toward Suzuki‐Miyaura coupling reaction

When a single metal fails to promote an efficient Suzuki‐Miyaura coupling reaction at ambient temperature, the synergistic cooperation of two distinct metals might improve the reaction. To examine the synergistic effect of palladium and nickel for catalyzing Suzuki coupling reaction, g‐C₃N₄ supported metal nanoparticles of PdO, NiO and Pd‐PdO‐NiO were prepared, characterized and their catalytic activities evaluated over different aryl halides at room temperature and 78 °C. The morphological characterization of Pd‐PdO‐NiO/g‐C₃N₄ demonstrated that the bimetallic particles were uniformly dispersed over the g‐C₃N₄ layers with diameters ranging from 3.5‐7.7 nm. XPS analysis showed that nanoparticles of Pd‐PdO‐NiO consisted of Pd(II), Pd(0) and Ni(II) sites. The experiments performed on the catalytic activity of Pd‐PdO‐NiO/g‐C₃N₄ showed that the prepared catalyst demonstrated an efficient activity without using toxic solvents.     

Pd/Co双金属纳米颗粒的制备及催化制氢性能

采用聚乙烯吡咯烷酮(PVP)保护的化学共还原法制备了Pd/Co双金属纳米颗粒, 研究了PVP及还原剂(NaBH₄)的用量、金属盐浓度、金属比例等对Pd/Co双金属纳米颗粒催化NaBH₄制氢性能的影响. 透射电子显微镜(TEM)的结果表明, 所制备的Pd/Co双金属纳米颗粒的平均粒径在1.5-2.8 nm之间. Pd/Co双金属纳米颗粒(BNPs)的催化活性远高于Pd与Co单金属纳米颗粒的活性; 当Pd/Co的理论原子比为1/9时, 双金属纳米颗粒的催化活性最高可达15570 mol·mol^-1·h^-1 (文中纳米颗粒的催化活性均为每摩尔Pd的活性). 密度泛函理论(DFT)的计算结果表明, Pd原子与Co原子之间发生电荷转移, 使得Pd原子带负电而Co原子带正电, 荷电的Pd和Co原子进而成为催化反应的活性中心. 所制备的Pd/Co双金属纳米颗粒具有很好的催化耐久性, 即使重复使用5次后, 该催化剂仍具有较高的催化活性, 且使用后的纳米颗粒催化剂也没有出现团聚现象. 双金属纳米颗粒催化NaBH₄水解反应的活化能约为54 kJ·mol^-1.     

Nature of the modifying action of white phosphorus on the properties of nanosized hydrogenation catalysts based on bis(dibenzylideneacetone)palladium(0)

The catalytic properties and nature of the nanoparticles forming in the system based on Pd(dba)₂ and white phosphorus are reported. A schematic mechanism is suggested for the formation of nanosized palladium-based hydrogenation catalysts. The mechanism includes the formation of palladium nanoclusters via the interaction of Pd(dba)₂ with the solvent (N,N-dimethylformamide) and substrate and the formation of palladium phosphide nanoparticles. The inhibiting effect exerted by elemental phosphorus on the catalytic process is due to the conversion of part of the Pd(0) into palladium phosphides, which are inactive in hydrogenation under mild conditions, and the formation of mainly segregated palladium nanoclusters and palladium phosphide nanoparticles. By investigating the interaction between Pd(dba)₂ and white phosphorus in benzene, it has been established that the formation of palladium phosphides under mild conditions consists of the following consecutive steps: Pd(0) → PdP₂ → Pd₅P₂ → Pd₃P. It is explained why white phosphorus can produce diametrically opposite effects of on the catalytic properties of nanosized palladium-based hydrogenation catalysts, depending on the nature of the palladium precursor.     

Chemoselective hydrogenation method catalyzed by Pd/C using diphenylsulfide as a reasonable catalyst poison

While Pd/C is one of the most useful catalysts for hydrogenation, the high catalyst activity of Pd/C causes difficulty in its application to chemoselective hydrogenation between different types of reducible functionalities. In order to achieve chemoselective hydrogenation using Pd/C, we investigated catalyst poison as a controller of the catalyst activity. We found that the addition of Ph₂S (diphenylsulfide) to the Pd/C-catalyzed hydrogenation reaction mixture led to reasonable deactivation of Pd/C. By the use of the Pd/C-Ph₂S catalytic system, olefins, acetylenes, and azides can be selectively reduced in the coexistence of aromatic carbonyls, aromatic halides, cyano groups, benzyl esters, and N-Cbz (benzyloxycarbonyl) protecting groups. The present method is promising as a general and practical chemoselective hydrogenation process in synthetic organic chemistry.     

Highly Selective Pd–Cu/α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for Liquid-Phase Hydrogenation: The Influence of the Pd: Cu Ratio on the Structure and Catalytic Characteristics

The structure and catalytic characteristics of a series of Pd–Cu/α-Al₂O₃ catalysts with Pd: Cu ratio varied from Pd₁–Cu_0.5 to Pd₁–Cu₄ were studied. The use of α-Al₂O₃ with a small surface area (S_sp = 8 m²/g) as a support made it possible to minimize the effect of diffusion on the catalytic characteristics and to study the structure of Pd–Cu nanoparticles by X-ray diffraction (XRD) analysis. The XRD analysis and transmission electron microscopy (TEM) data indicated the formation of uniform bimetallic Pd–Cu nanoparticles (d = 20–60 nm), whose composition corresponded to a ratio between the metals in the catalyst, and also the absence of monometallic Pd⁰ and Cu⁰ nanoparticles. The study of catalytic properties in the liquid-phase hydrogenation of diphenylacetylene (DPA) showed that the activity of the catalysts rapidly decreased with the Cu content increase; however, in this case, the yield of a desired alkene compound significantly increased. The selectivity of alkene formation on the catalysts with the ratios Pd: Cu = 1: 3 and 1: 4 was superior to the commercial Lindlar catalyst.     

Recyclable Polymer‐Supported Nanometal Catalysts in Water

Two types of polymer‐supported nanometal catalysts with high catalytic activity and recyclability in water have been developed. One catalyst was composed of linear polystyrene‐stabilized metal nanoparticles (PS‐MtNPs). A palladium catalyst (PS‐PdONPs) was prepared in water by the thermal decomposition of Pd(OAc)₂ in the presence of polystyrene. The degree of immobilization of Pd, but not the size of the Pd nanoparticles, was dependent on the molecular weight and cross‐linking of the polystyrene. The PS‐PdONPs exhibited high catalytic activity for Suzuki, Heck, and Sonogashira coupling reactions in water and they could be recycled without loss of activity. Linear polystyrene was also suitable as a stabilizer for in situ generated PdNPs and PtNPs. The second catalyst was a polyion complex that was composed of poly[4‐chloromethylstyrene‐co‐(4‐vinylbenzyl)tributylammonium chloride] and poly(acrylic acid)‐stabilized PdNPs (PIC‐PdNPs). Aggregation and redispersion of PIC‐PdNPs were easily controlled by adjusting the pH value of the solution.     

NHC Pdii complexes for the solvent-free telomerisation of isoprene with methanol

A comparative study of N-heterocyclic carbene Pd complexes in the head-to-head isoprene telomerization with methanol revealed significant impact of ligand structure as well as axial group structure on the catalyst activity. Some N,N'-diaryl substituted imidazol-2-ylidene, imidazolidin-2-ylidene and expanded-ring tetrahydropyrimidin-2-ylidene and tetrahydrodiazepin-2-ylidene based ligands were tested to explore the fundamental correlations between structure (ring carbene size along with the substituent sterical and electronic properties) and catalytic activity.     

A Facile and In-situ Methanol-mediated Fabrication of Low Pd Loading,High-efficiency and Size-selectivity Pd@ZIF-8 Hydrogenation Catalyst

In-situ encapsulation of tiny and well-dispersed Pd nanoparticles (Pd NPs) in zeolitic imidazolate frameworks (ZIFs) was firstly achieved using a one-pot and facile methanol-mediated growth approach, in which methanol served as both solvent and a mild reductant. The microstructure, morphology, crystallinity, porosity as well as evolution process of the catalysts were determined by TEM, XRD, N₂ adsorption and UV-vis spectra. Due to the complete encapsulation of such Pd NPs combined with ultrahigh surface area and uniform microporous structure of ZIF-8, the resulting Pd@ZIF-8-60 min nanocomposite exhibited more superior catalytic activity for olefins hydrogenation with TOF of 7436 h⁻¹ and excellent size selectivity than previously reported catalysts. Furthermore, the catalyst displays excellent recyclability for 1-octene hydrogenation and without any loss of the Pd active species.     

Recyclable N-heterocyclic carbene/palladium catalyst on graphene oxide for the aqueous-phase Suzuki reaction

Graphene oxide (GO) was functionalized with a N-heterocyclic carbene (NHC) precursor, 3-(3-aminopropyl)-1-methylimidazolium bromide ([APMIm][Br]) for the immobilization of palladium catalyst. The GO-supported NHC precursor (IMGO) formed a stable complex with Pd(OAc)₂ (GO–NHC–Pd), which showed excellent catalytic activity and fast reaction kinetics in the aqueous-phase Suzuki reaction of aryl bromides and chlorides at relatively mild conditions (1 h at 50 °C). The GO–NHC–Pd catalyst was reused several times without any loss of its catalytic activity in the Suzuki reaction of aryl bromide.     

Palladium Nanoparticles Supported on a Porous Organic Polymer: An Efficient Catalyst for Suzuki‐Miyaura and Sonogashira Coupling Reactions

A new porous organic polymer (POP) with high thermal stability and large surface area has been synthesized and applied in the preparation of Pd/POP catalyst. Pd/POP was characterized by XRD, TGA, SEM and TEM. The catalyst consists of highly dispersed palladium nanoparticles of 0.9–4 nm size on POP with a large surface area of 650 m²/g. It presents high catalytic activity for Suzuki‐Miyaura and Sonogashira reactions. The catalyst was reusable for three to five times without significant loss of activity.     

Influence of the Base on Pd@MIL‐101‐NH2(Cr) as Catalyst for the Suzuki–Miyaura Cross‐Coupling Reaction

The chemical stability of metal–organic frameworks (MOFs) is a major factor preventing their use in industrial processes. Herein, it is shown that judicious choice of the base for the Suzuki–Miyaura cross‐coupling reaction can avoid decomposition of the MOF catalyst Pd@MIL‐101‐NH₂(Cr). Four bases were compared for the reaction: K₂CO₃, KF, Cs₂CO₃ and CsF. The carbonates were the most active and achieved excellent yields in shorter reaction times than the fluorides. However, powder XRD and N₂ sorption measurements showed that the MOF catalyst was degraded when carbonates were used but remained crystalline and porous with the fluorides. XANES measurements revealed that the trimeric chromium cluster of Pd@MIL‐101‐NH₂(Cr) is still present in the degraded MOF. In addition, the different countercations of the base significantly affected the catalytic activity of the material. TEM revealed that after several catalytic runs many of the Pd nanoparticles (NPs) had migrated to the external surface of the MOF particles and formed larger aggregates. The Pd NPs were larger after catalysis with caesium bases compared to potassium bases.