Solvent extraction of hafnium(IV)

^{175, 181}Hafnium(IV) was extracted by HDBP in 2-ethylhexanol from 1–10M solutions of HClO₄, HCl and HNO₃, and 1–8M H₂SO₄. As with low polar organic phase diluents, the acidity dependence of the distribution ratio of Hf, D, passes through a minimum for HClO₄, HCl, and H₂SO₄ whereas only an increase of D can be observed with increasing HNO₃ concentration. From the slope analysis the following complexes were found to be extracted (HDBP=HA): HfA₄ at <4M HClO₄ and <5M HCl, lg K_extr=9, HfX₄(HA)₄ (X=ClO ₄ ⁻ , Cl⁻ or NO ₃ ⁻ ) at >5M HClO₄, >7M HCl and 1–10M HNO₃, Hf(SO₄)A₂(HA)_3–4 at <3M H₂SO₄, and Hf(SO₄)₂ (HA)₄ at >6M H₂SO₄. Coextraction of sulphate with hafnium from H₂SO₄ solutions was evidenced in experiments with macro concentrations of Hf(IV) and³⁵SO ₄ ²⁻ . Part XX: Coll. Czech. Chem. Commun., 40 (1975) 3617.     

Extraction studies of antimony bromide into benzene

Antimony(III) can be extracted rapidly and quantitatively into benzene from a 10 M H₂SO₄–0.03 M HBr system. The extracted antimony bromide has an antimony to bromine ratio of 1:3. Under the above optimum conditions for extraction of antimony, the behaviour of 35 other elements was studied; As³⁺, Ge⁴⁺, Se⁴⁺, and Sn²⁺ were extracted almost quantitatively, and the percentage extraction of Hg²⁺, Bi³⁺, and Te⁴⁺ was 74.1%, 10% and 5.5% respectively. The extraction of the elements into benzene from a 5 M H₂SO₄–0.01 M KI system was also investigated, A comparison of the two systems is given.     

Anion-exchange separation of Pt and Pd using perchloric and hydrochloric acid solutions

On Biorad Ag-1X8 anion-exchange resin (200–400 mesh), Pd and Pt may be separated from one another by elution with 0.2M HClO₄, and 5M HClO₄, respectively. If present, Au may be retained by making the elutriants 0.003M in HCl. Alternatively, reduction by H₂SO₃ enables elution of Pt²⁺ with 6M HCl before recovery of Pd²⁺ with 0.2M HClO₄·Ir⁴⁺ is reduced to Ir³⁺ by H₂SO₃ and may be eluted ahead of Pt²⁺ by 2M HCl.     

Extraction of mineral acids with methyltrioctylammonium dinonylnaphthalenesulfonate

The interphase distribution of hydrogen halides (HF, HCl, HBr, and HI) and oxygen-containing acids (H₂SO₄ and HClO₄) in a system with the binary extracting agent methyltrioctylammonium dinonylnaphthalenesulfonate was studied. It was found in the extraction of mineral acids depending on the aqueous acidity, that the distribution ratios of mineral anions B ^m? decreased with pH in accordance of the laws of binary extraction. The extraction isotherms of mineral acids were obtained, and the apparent constants of extraction were calculated.     

Copper(II), cobalt(II), nickel(II) and mercury(II) complexes of 1,4-diphenylthiosemicarbazide

Summary The preparation and characterization of Cu^II, Co^II, Ni^II and Hg^II complexes containing 1,4-diphenylthiosemicarbazide (DPhTSC) of the type [Cu(DPhTSC-H)X.H₂O]nH₂O (X= Cl, Br or Ac; n=0 or 1) · [M(DPhTSC-H)₂yH₂O] (M=Co^II or Ni^II; y=0 or 1) and [Hg(DPhTSC)Cl₂]2 H₂O and [Cu(D-PhTSC)₂SO₄]H₂O are reported. The stereochemistry of the complexes have been studied with the help of magnetic and electronic measurements. The anomalous magnetic moments observed in all cases have been explained. The i.r. spectral studies have been used to determine the bonding sites in the complexes.     

AC impedance study on semiconducting properties of anodic plumbous oxide film

The semiconducting properties of anodic film formed on Pb in 4.5mol·dm^?3H₂SO₄ solution (30°C) at 0.9 V (vs. Hg/Hg₂SO₄) for 2 h were studied using AC impedance method. The phase composition of the film is PbSO₄ and PbO·PbSO₄. The semiconducting properties are due to the latter. The Mott-Schottky plots show that the said film is an n-type semiconductor with flat-band potential of ?0.9 V (vs. Hg/Hg₂SO₄) and donor density of 1×10¹⁶ cm^?3. The surface density measured at 410–2500 Hz is (2–5)×10¹² cm^?2 eV^?1.     

Effect of ionic composition of solutions on the methanol reaction with adsorbed oxygen on smooth polycrystalline platinum electrodes: Transients of the open-circuit potential

Transients of the open-circuit potential observed in the reaction of methanol with oxygen (O_ads) preliminarily adsorbed on smooth polycrystalline platinum (pcPt) are measured in 0.05 M HClO₄, 0.5 M HClO₄, 0.05 M H₂SO₄, 0.05 M H₂SO₄ + 0.45 M Na₂SO₄, and 0.05 M H₂SO₄ + 0.45 M Cs₂SO₄. It is shown that the solution pH has a weak effect on the transient characteristics (when the reversible hydrogen electrode potential scale is used). This confirms the chemical nature of rate-controlling stages in the reaction mechanism. The changes in the reaction rate, observed upon going from one electrolyte to another, are preferentially associated with the involvement of solution ions in the formation of activated surface complexes that include CH₃OH, O_ads, and supporting-electrolyte components.     

Extraction of some elements of the groups IV b and VI b with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) from aqueous mineral acid solutions

Solvent extraction of Cr(VI), Mo(VI), W(VI) and Hf(IV) with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) in methyl isobutylketone (MIBK), xylene and chloroform (CHCl₃) from mineral acid solutions was studied. Chromium(VI) is not extracted from any of the acids studied (HCl, H₂SO₄ and HClO₄). Molybdenum(VI) is quantitatively extracted by the reagent in xylene and CHCl₃ from HClO₄ and HNO₃ solutions. It is also extracted quantitatively by the reagent in MIBK from HCl, HNO₃ and H₂SO₄ solutions but the participation of the diluent as extractant is considerable. Tungsten(VI) is quantitatively extracted in xylene from 9M HClO₄ solution. MIBK used as diluent also affects its extraction with PMCP. Hafnium(IV) is not extracted from H₂SO₄ solutions while it extracts more than 99% at 3M HNO₃ and above. The extracted species likely are: MoO₂(PMCP)₂, WO₂(PMCP)₂ and Hf(PMCP)₄, respectively.     

Quantum chemical studies on the role of water microsolvation in interactions between group 12 metal species (Hg2+, Cd2+, and Zn2+) and neutral and deprotonated cysteines

Interactions of group 12 metal(II) species (Hg²⁺, Cd²⁺, Zn²⁺, Hg(H₂O) _n ²⁺ , Cd(H₂O) _n ²⁺ , and Zn(H₂O) _n ²⁺ (n?=?1, 2) with neutral (RSH), deprotonated (RS^?), and doubly deprotonated cysteine species (abbreviated as ??H₂cys??, ??Hcys^???, and ??cys^2???, respectively) are examined with the Becke three-parameter Lee?CYang?CParr (B3LYP) hybrid functional after preliminary screening in a conformation analysis with the Parameterized Model number 3 (PM3) semiempirical method. Effects of water on aqueous solution are evaluated by microsolvation and polarized continuum model (PCM) approaches. In the most stable conformations of M(H₂cys)²⁺ and M(Hcys)⁺ complexes (M?=?Hg²⁺, Cd²⁺, and Zn²⁺), the SH group of the cysteine moiety is already deprotonated and undergoes strong binding with the metal ion. Among Hg(H₂cys)²⁺ complexes, cysteine complexes of Hg²⁺ without deprotonation of the SH group and mercury(II) carboxylato-type structures are at least 83 and 117?kJ/mol less stable in energy than the most stable complex (B3LYP/6-311++G(d,p)-SDD+d+f//B3LYP/6-31G(d)-SDD+d). Although Zn²⁺ binds more strongly than Hg²⁺ to a H₂cys molecule at the high-level CCSD(T)/6-311++G(d,p)-SDD+d+f//B3LYP/6-311++G(d,p)-SDD+d+f level, [Hg(H₂O)₂]²⁺ is stronger than [Zn(H₂O)₂]²⁺ because the deformation of [Zn(H₂O)₂]²⁺ required to bind to cys is much more than in [Hg(H₂O)₂]²⁺. Complexes with a deprotonated cysteine, M(Hcys)⁺ and M(cys), prefer a multidentate structure.     

Liquid-liquid extraction of molybdenum(VI) and uranium(VI) by LIX 622

The order of extraction of Mo(VI) from 1M acid solutions by 5% (v/v) LIX 622 (HL) in benzene is HCl>HNO₃>HClO₄>H₂SO₄, and extraction decreases with increasing concentration of HCl and H₂SO₄, and increases slightly with increasing concentration of HNO₃ and HClO₄. The extracted species is shown to be MoO₂L₂ as established by IR data of organic extracts and the extracted species in the solid form. Extraction is almost quantitative at and above 10% LIX 622, and is found to be independent of [Mo(VI)] in the range of 10^–4 to 10^–3 M. The diluents CCl₄, CHCl₃ and C₆H₆ are found to be superior to solvents of high dielectric constant for extraction of Mo(VI). Extraction of uranium(VI) by 10% (v/v) LIX 622 in benzene was found to increase with increasing equilibrium pH (3.0 to 6.0), and becomes quantitative at pH 5.9. Tributyl phosphate acts as a modifier up to 2% (v/v). Thorium(IV) is almost not extracted by LIX 622 or its mixture. Separation of Mo(VI) and U(VI) is feasible.     

Effect of acid treatment of Corich core–Ptrich shell/C electrocatalyst on oxygen reduction reaction

Co_{rich core}–Pt_{rich shell}/C prepared by thermal decomposition and chemical reduction methods were treated by 20% H₂SO₄ aqueous solution and used as the electrocatalysts for the oxygen reduction reaction (ORR). The particle size range of Co_{rich core}–Pt_{rich shell} (molar ratio of 0.92:1) on carbon powder support decreased from 3–8 to 1–6 nm when the time for the electrocatalysts immersed and treated with 20% H₂SO₄ aqueous solution increased from 0 to 4 h. Using Co_{rich core}–Pt_{rich shell} (molar ratio of 0.92:1)/C treated with 20% H₂SO₄ from 0 to 4 h as the working electrode, the open circuit potential of ORR in 0.5 M HClO₄ aqueous solution increased from 0.9995 to 1.0155 V, and the current density, mass activity, and specific activity at the overpotential of 0.1 V increased from 0.619 mA cm^?2, 6.184 A g^?1, and 18.614 μA cm^?2 to 0.912 mA cm^?2, 15.544 A g^?1, and 23.413 μA cm^?2, respectively.     

Transition metal complexes of 3-acetylpyridine 4 N-(2-pyridyl)thiosemicarbazone (HAPS); structural,spectroscopic, and biological studies

This work examines transition metal ion complexes which have been synthesized from 3-acetylpyridine ⁴ N-(2-pyridyl)thiosemicarbazone (HAPS) (1). [Cu(HAPS)₂Cl₂]?·?H₂O (2), [Hg(HAPS)₂Cl₂] (3), [Ni(HAPS)Cl₂]?·?2H₂O (4), [UO₂(APS)₂]?·?2H₂O (5), [VO(HAPS)₂]SO₄?·?H₂O (6), and [Zn(HAPS)₂Cl₂] (7) were characterized by elemental analysis, spectral (IR, ¹H-NMR, and UV-Vis), magnetic, and molar conductance measurements. The biochemical studies showed that 2 and 3 have powerful and complete degradation on both DNA and protein. Complexes 2, 4, and 7 showed significant antioxidant properties, especially scavenging on superoxide and hydroxyl radicals. The antibacterial screening demonstrated that all studied complexes have maximum and broad range activities against Gram-positive and Gram-negative bacterial strains.     

Palladium(II) complexes of aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium

The formation of palladium(II) complexes with aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium has been studied. The spectrophotometric studies showed the formation of 1:1 and 1:2 complexes between palladium(II) and amine in absence of HClO₄. An increase in [HClO₄] in reaction mixture suppresses the complex formation and in presence of [HClO₄] ～10^?3 mol dm^?3 only a 1:1 complex between palladium(II) and amine has been observed. The effect of Cl^? on the complex formation has also been studied. Palladium(II)‐catalyzed oxidation of these amines by chloramine‐T showed a first‐order dependence of rate with respect to each—oxidant, substrate, catalyst, and H⁺. The mechanism consistent with kinetic data for the oxidation process has been proposed in absence as well as in presence of initial [Cl^?]. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 603–612, 2002     

Hg (II) extraction in a PEG-based aqueous two-phase system in the presence of halide ions. I. Liquid phase analysis

The partition behaviour of Hg (II) was studied in an aqueous polyethylene glycol (PEG) — (NH₄)₂SO₄ two-phase system as a function of halide, halide concentration, and pH. For a system prepared by mixing equal volumes of 40 % (w/w) PEG (1550) with 40 % (w/w) (NH₄)₂SO₄, Hg(II) remains almost exclusively in the salt-rich phase. The addition of NaX (X = Cl⁻, Br⁻, I⁻) enhances Hg (II) partition into the PEG-rich phase due to the formation of halide complexes. The efficiency of halide extractants increases in the order: Cl⁻ < Br⁻ < I⁻. Mercury extraction is improved at lower halide ion concentration by higher stock salt solution acidity. From the distribution coefficients determined as a function of halide ion concentration, the extracted species were identified. The Hg (II) extractability is determined by the type and stability of the Hg (II) halide species, and depends on the stock salt solution acidity. The observed behaviour is discussed and a possible extraction mechanism is proposed.     

Extraction studies of metal complexes with some macrocyclic tetraaza ligands and xanthene dyes : Spectrophotometric determination of Cadmium(II) with Tetramethyltetraazacyclotetradecane and Erythrosin A

The liquid-liquid extraction of ion-pair complexes of zinc(II), copper(II) and cadmium(II) is described. The macrocyclic ligands 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane (4Me-cyclam-14) and rac-5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (Tet b) are used with xanthene dyes as the counter ions. The apparent extraction constants (D′_c) are reported. The sequences of extraction efficiency of both ligands are related to the structure of the complexes. The apparent molar absorptivity of the Cd(4Me-cyclam-14)—erythrosin A ion-associate is 1.1 × 10⁵ l mol^? cm^?1. The calibration graph is linear over the range 0—10^?5 M, which allows even 0.05 μg ml^?1 cadmium to be determined in a 0.5 M sodium hydroxide medium. No interference was observed from Ni²⁺, Pb²⁺, Zn²⁺, Mg²⁺, Sn⁴⁺, Ga³⁺, Al³⁺ and Fe³⁺. Interferences were Cu²⁺, Hg²⁺, Ag⁺ and large anions.     

Solvent extraction of hafnium(IV) by TBP and topo from acidic organic-aqueous solutions

Tracer concentrations of Hf(IV) were extracted by 60% TBP solution in benzene from 5M HClO₄, 5M HCl, 6M HNO₃ and 8M H₂SO₄ solutions, and by 1·10^?4 M TOPO solution in benzene from 2M HClO₄ and 2M HCl solutions in the presence of a variety of organic solvents miscible with the aqueous phase. Whereas for TBP these solvents caused an increase of HF(IV) extraction, an opposite effect was observed for TOPO. The results were discussed from the point of view of various solute-solvent and solvent-solvent interactions.     

Studies on 2-acetylthiophene-2-furoylhydrazone complexes of 3d-bivalent metal ions

Summary Metal(II) complexes of 2-acetylthiophene-2-furoylhydrazone (HL) of the types [VO(HL)SO₄], [Cu(HL)₂Cl₂(H₂O)], [M(HL)₂Cl₂] [M=Co^II, Ni^II, or Zn^II] and [ML₂(H₂O)₂] [M=Co^II, Ni^II, Cu^II or Zn^II] have been prepared and characterized on the basis of elemental analyses, molar conductance, magnetic susceptibility, visible, e.s.r. and i.r. spectral studies. The bonding and stereochemistry of the complexes are discussed.     

Extraction equilibria for the 4-(2-Pyridylazo)-Resorcinol-Nickel(II)-Quaternary-Ammonium salt system

The extraction equilibria of nickel(II)-PAR complexes with tetradecyldimethylbenzylammonium chloride(Q⁺Cl^?) are investigated. Two kinds of nickel complex are extracted by chloroform: Ni(HR)₂,nQ⁺Cl^?₍₀₎(?⁵⁰⁰ = 3.73·10⁴l mol^?1cm^?1) at about pH 5 and 2Q⁺ NiR^2-_2(o)(?⁵⁰⁰ = 8.08·10⁴ l mol^?1 cm^?1) at above pH 8.5. The extraction constant for 2Q⁺ NiR^2-_2(o) was evaluated as [2Q⁺ NiR^2-₂]₀/[NiR^2-₂] [Q⁺]² = 10^11.16 at μ = 0.1 (Na₂SO₄. Synergic extraction studies of the Ni(HR)₂ species under slightly acidic conditions show that the species is Ni(HR)₂(H₂O)₂in auqeous solution and is extracted into chloroform as the adduct Ni(HR)₂(TBP)₂ (?⁵³⁵ = 3.57·10⁴ l mol^?1 cm^?1. Based on the extraction behavior of these complexes, the structures of the Ni²⁺—PAR complexes are discussed.     

Novel methodology for the study of mercury methylation and reduction in sediments and water using <Superscript>197</Superscript>Hg radiotracer

Mercury tracers are powerful tools that can be used to study mercury transformations in environmental systems, particularly mercury methylation, demethylation and reduction in sediments and water. However, mercury transformation studies using tracers can be subject to error, especially when used to assess methylation potential. The organic mercury extracted can be as low as 0.01% of the endogenous labeled mercury, and artefacts and contamination present during methylmercury (MeHg) extraction processes can cause interference. Solvent extraction methods based on the use of either KBr/H₂SO₄ or HCl were evaluated in freshwater sediments using ¹⁹⁷Hg radiotracer. Values obtained for the ¹⁹⁷Hg tracer in the organic phase were up to 25-fold higher when HCl was used, which is due to the coextraction of ¹⁹⁷Hg²⁺ into the organic phase during MeHg extraction. Evaluations of the production of MeHg gave similar results with both MeHg extraction procedures, but due to the higher Hg²⁺ contamination of the controls, the uncertainty in the determination was higher when HCl was used. The Hg²⁺ contamination of controls in the HCl extraction method showed a nonlinear correlation with the humic acid content of sediment pore water. Therefore, use of the KBr/H₂SO₄ method is recommended, since it is free from these interferences. ¹⁹⁷Hg radiotracer (T _1/2 = 2.673 d) has a production rate that is about 50 times higher than that of ²⁰³Hg (T _1/2 = 46.595 d), the most frequently used mercury radiotracer. Hence it is possible to obtain a similar level of performance to ²⁰³Hg when it is used it in short-term experiments and produced by the irradiation of ¹⁹⁶Hg with thermal neutrons, using mercury targets with the natural isotopic composition. However, if the 0.15% natural abundance of the ¹⁹⁶Hg isotope is increased, the specific activity of the ¹⁹⁷Hg tracer can be significantly improved. In the present work, ¹⁹⁷Hg tracer was produced from mercury 51.58% enriched in the ¹⁹⁶Hg isotope, and a 340-fold increase in specific activity with respect to natural mercury targets was obtained. When this high specific activity tracer is employed, mercury methylation and reduction experiments with minimum mercury additions are feasible. Tracer recovery in methylation experiments (associated with Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spike, but also with Hg²⁺ contamination and Me¹⁹⁷Hg artefacts) with marine sediments was about 0.005% g⁻¹ WS (WS: wet sediment) after 20 h incubation with mercury additions of 0.05 ng g⁻¹ WS, which is far below natural mercury levels. In this case, the amount of Hg²⁺ reduced to Hg⁰ (expressed as the percent ¹⁹⁷Hg⁰ recovered with respect to the ¹⁹⁷Hg²⁺ added) varied from 0.13 to 1.6% g⁻¹ WS. Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spike after 20 h of incubation of freshwater sediment ranged from 0.02 to 0.13% g⁻¹ WS with mercury additions of 2.5 ng g⁻¹ WS, which is also far below natural levels. ¹⁹⁷Hg⁰ recoveries were low, 0.0058 ± 0.0013% g⁻¹ WS, but showed good reproducibility in five replicates. Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spiked in freshwater samples ranged from 0.1 to 0.3% over a period of three days with mercury additions of 10 ng L⁻¹. A detection limit of 0.05% for Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spike was obtained in seawater in a 25 h incubation experiment with mercury additions of 12 ng L⁻¹.     

Changes in Pt(111) Two-dimensional Long-range Order Induced by Slow Mercury Adsorption and Alloying

A long-term cyclic voltammetry study of Pt(111) electrode in dilute solutions of mercury sulfate (5 × 10^–8–5 × 10^–7 M Hg₂SO₄ + 0.5 M H₂SO₄) has shown that a slow transformation of Pt(111) surface takes place. This transformation leads to a decrease in the bi-dimensional long-range order of the surface. The interpretation of the process involves the increase in mobility of Pt atoms and surface alloying in the presence of mercury. Similar processes of Pt(111) surface disordering take place in acid solution of copper sulfate with the addition of Hg₂SO₄. The penetration of Hg atoms beneath the Pt(111) topmost layer proceeds when only a fraction of the mercury monolayer is deposited on the electrode surface.