The standard enthalpies of formation of cyclohexylamine and cyclohexylamine hydrochloride

The standard enthalpy of combustion of cyclohexylamine has been measured in an aneroid rotating-bomb calorimeter. The value ΔH_o^o(c-C₆H₁₁NH₂, 1) = ?(4071.3 ± 1.3) kJ mol^?1 yields the standard enthalpy of formation ΔH_f^o(c-C₆H₁₁NH₂, 1) = ?(147.7 ± 1.3) kJ mol^?1. The corresponding gas-phase standard enthalpy of formation for cyclohexylamine is ΔH_f^o(c-C₆H₁₁NH₂, g) = ?(104.9 ± 1.3) kJ mol^?1. The standard enthalpy of formation of cyclohexylamine hydrochloride, ΔH_f^o(c-C₆H₁₁NH₂·HCl, c) = ?(408.2 ± 1.5) kJ mol^?1, was derived by combining the measured enthalpy of solution of the salt in water, literature data, and the ΔH_c^o measured in this study. Comment is made on the thermochemical bond enthalpy H(CN).     

Bond dissociation energies and radical heats of formation in CH3Cl,CH2Cl2, CH3Br,CH2Br2, CH2FCl,and CHFCl2

An analysis of thermochemical and kinetic data on the bromination of the halomethanes CH_4–nX_n (X = F, Cl, Br; n = 1–3), the two chlorofluoromethanes, CH₂FCl and CHFCl₂, and CH₄, shows that the recently reported heats of formation of the radicals CH₂Cl, CHCl₂, CHBr₂, and CFCl₂, and the C? H bond dissociation energies in the matching halomethanes are not compatible with the activation energies for the corresponding reverse reactions. From the observed trends in CH₄ and the other halomethanes, the following revised ΔH°_f,298 (R) values have been derived: ΔH°_f(CH₂Cl) = 29.1 ± 1.0, ΔH°_f(CHCl₂) = 23.5 ± 1.2, ΔH_f(CH₂Br) = 40.4 ± 1.0, ΔH°_f(CHBr₂) = 45.0 ± 2.2, and ΔH°_f(CFCl₂) = ?21.3 ± 2.4 kcal mol^?1. The previously unavailable radical heat of formation, ΔH°_f(CHFCl) = ?14.5 ± 2.4 kcal mol^?1 has also been deduced. These values are used with the heats of formation of the parent compounds from the literature to evaluate C? H and C? X bond dissociation energies in CH₃Cl, CH₂Cl₂, CH₃Br, CH₂Br₂, CH₂FCl, and CHFCl₂.     

Solution-Structure and Aggregation Behavior of Two Dilithiostyrene Derivatives

The solution structure and the aggregation behavior of (E)-2-lithio-1-(2-lithiophenyl)-1-phenylpent-1-ene ( 1 ) and (Z)-2-lithio-1-(2-lithiophenyl)ethene ( 2 ) were investigated by one- and two-dimensional ¹H-, ¹³C-, and ⁶Li-NMR spectroscopy. In Et₂O, both systems form dimers which show homonuclear scalar ⁶Li,⁶Li spin-spin coupling. In the case of 2 , extensive ⁶Li,¹H coupling is observed. In tetrahdrofuran and in the presence of 2 mol of N,N,N′,N′-tetramethylethylylenediamine (tmeda), the dimeric structure of 1 coexists with a monomer. The activation parameters for intra-aggregate exchange in the dimers of 1 and 2 ( 1 (Et₂O): ΔH≠ = 62.6 ± 13.9 kJ/mol, ΔS≠ = 5.8 ± 14.0 J/mol K, ΔG≠(263) = 61.1 kJ/mol; 2 (dimethoxyethane): ΔH≠ = 36.9 ± 6.5 kJ/mol, ΔS≠ = ?61 ± 25 J/mol K, ΔG≠(263) = 54.0 kJ/mol) and the thermodynamic parameters for the dimer-monomer equilibrium for 1 (ΔH°; = 26.7 ± 5.5 kJ/mol, ΔS° = 63 ± 27 J/mol K), where the monomer is favored at low temperature, were determined by dynamic NMR studies.     

The enthalpies of formation of bis-(benzene)molybdenum and of bis-(toluene)tungsten

Microcalorimetric measurements at 520–523 K of the heats of thermal decomposition and of iodination of bis-(benzene)molybdenum and of bis-(toluene)tungsten have led to the values (kJ mol^?): ΔH^o_f[Mo(η-C₆H₆)₂, c] = (235.3 ± 8) and ΔH^o_f[W(η⁶-C₇H₈)₂, c] = (242.2 ± 8) for the standard enthalpies of formation at 25°C. The corresponding ΔH^o_f(g) values, using available and estimated enthalpies of sublimation, are (329.9 ± 11) and 352.2 ± 11) respectively, from which the metalligand mean bond-dissociation enthalpies, $\text{D}$(Mo—benzene) = (247.0 ± 6) and $\text{D}$(W—toluene) = (304.0 ± 6) kJ mol^?1, are derived.     

Thermodynamic data for hydrogen bonding of thiols with Lewis bases in carbon tetrachloride. Weak association by the PMR method

Data for 30 hydrogen bonding pairs taken from the alkanethiols, i-C₃H₇SH, nC₃H₉SH and t-C₄H₉SH, and 16 bases have been obtained by a PMR method. Representative data for i-C₃H₇SH at 304 ± 2°K are (base, 10²K in M^?1, –ΔH° in kcal/mole): (CH₂)₄S, 3·1, 0·8; (CH₃)₂S, 3·0, 0·9; (CH₃)₂S₂, 3·7, 0·5; (CH₃)₂CO, 4·7, 0·9; CH₃COOC₂H₅, 5·7, 1·1; (CH₂)₄O, 6·1, 1·0; HCON(CH₃)₂, 12, 0·9; (CH₃ O)₂ SO, 12, 0·9; (C₂ H₅O)₃PO, 6·5, 1·0; CH₃ (CH₃ O)₂PO, 18, 1·0; ((CH₃)₂N)₂ CO, 5·9, 1·1; CH₃ CN, 13, 0·6. In essence, the problems and errors involved in obtaining equilibrium data for weak complexes stem from the limited concentration rangethat is accessible. This leads to large uncertainties in the quantities K, ΔH° and ΔS°. Structural effects on hydrogen bonding at the sulfur site, both as Lewis acid or base, are discussed. Two erroneous PMR methods in the literature used for assessing the strength of hydrogen bonds are pointed out.     

ab initio calculations and thermochemical analysis on C1 atom abstractions of chlorine from chlorocarbons and the reverse alkyl abstractions: Cl2 + R· ↔ Cl· + RCl

Thermodynamic properties (ΔH°_f(298), S°₍₂₉₈₎ and Cp(T) from 300 to 1500 K) for reactants, adducts, transition states, and products in reactions of CH₃ and C₂H₅ with Cl₂ are calculated using CBSQ//MP2/6‐311G(d,p). Molecular structures and vibration frequencies are determined at the MP2/6‐311G(d,p), with single‐point calculations for energy at QCISD(T)/6‐311 + G(d,p), MP4(SDQ)/CbsB4, and MP2/CBSB3 levels of calculation with scaled vibration frequencies. Contributions of rotational frequencies for S°₍₂₉₈₎ and Cp(T)'s are calculated based on rotational barrier heights and moments of inertia using the method of Pitzer and Gwinn [1]. Thermodynamic parameters, ΔH°_f(298), S°₍₂₉₈₎, and C_P(T), are evaluated for C₁ and C₂ chlorocarbon molecules and radicals. These thermodynamic properties are used in evaluation and comparison of Cl₂ + R· → Cl· + RCl (defined forward direction) reaction rate constants from the kinetics literature for comparison with the calculations. Data from some 20 reactions in the literature show linearity on a plot of Ea_fwd vs. ΔH_rxn,fwd, yielding a slope of (0.38 ± 0.04) and intercept of (10.12 ± 0.81) kcal/mole. A correlation of average Arrhenius preexponential factor for Cl· + RCl → Cl₂ + R· (reverse rxn) of (4.44 ± 1.58) × 10¹³ cm³/mol‐sec on a per‐chlorine basis is obtained with Ea_Rev = (0.64 ± 0.04) × ΔH_rxn,Rev + (9.72 ± 0.83) kcal/mole, where Ea_Rev is 0.0 if ΔH_rxn,Rev is more than 15.2 kcal/mole exothermic. Kinetic evaluations of literature data are also performed for classes of reactions. Ea_fwd = (0.39 ± 0.11) × ΔH_rxn,fwd + (10.49 ± 2.21) kcal/mole and average A_fwd = (5.89 ± 2.48) × 10¹² cm³/mole‐sec for hydrocarbons: Ea_fwd = (0.40 ± 0.07) × ΔH_rxn,fwd + (10.32 ± 1.31) kcal/mole and average A_fwd = (6.89 ± 2.15) × 10¹¹ cm³/mole‐sec for C₁ chlorocarbons: Ea_fwd = (0.33 ± 0.08) × ΔH_rxn,fwd + (9.46 ± 1.35) kcal/mole and average A_fwd = (4.64 ± 2.10) × 10¹¹ cm³/mole‐sec for C₂ chlorocarbons. Calculation results on the methyl and ethyl reactions with Cl₂ show agreement with the experimental data after an adjustment of +2.3 kcal/mole is made in the calculated negative Ea's. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 548–565, 2000     

Synthesis,structure, and kinetic studies on [RuCl2(NCCH3)2(cod)]

[RuCl₂(NCCH₃)₂(cod)], an alternative starting material to [RuCl₂(cod)] _n for the preparation of ruthenium(II) complexes, has been prepared from the polymer compound and isolated in yields up to 87% using a new work-up procedure. The compound has been obtained as a yellow solid without water of crystallization. The complexes [RuCl₂(NCR)₂(cod)] spontaneously transform into dimers [Ru₂Cl(μ-Cl)₃(cod)₂(NCR)] (R?=?Me, Ph). ¹H NMR kinetic experiments for these transformations evidenced first-order behavior. [RuCl₂(NCPh)₂(cod)] dimerizes slower by a factor of ten than [RuCl₂(NCCH₃)₂(cod)]. The following activation parameters, ΔH ^#?=?114?±?3?kJ?mol^?1 and ΔS ^#?=?66?±?9?J?K^?1?mol^?1 for R?=?CH₃CN (ΔG ^#?=?94?±?5?kJ?mol^?1, 298.15?K) and ΔH ^#?=?122?±?2?kJ?mol^?1 and ΔS ^#?=?75?±?6?J?K^?1?mol^?1 for R?=?Ph (ΔG ^#?=?100?±?4?kJ?mol^?1, 298.15?K), have been calculated from the first-order rate constants in the temperature range 294–323?K. The kinetic parameters are in agreement with a two-step mechanism with dissociation of acetonitrile as the rate-determining step. The molecular structures of [Ru₂Cl(μ-Cl)₃(cod)₂(NCR)] (R?=?Me, Ph) have been determined by X-ray diffraction.     

Equilibrium and Kinetic Studies on Ligand Substitution Reactions of Trans-[COIII(en)2(Me)H2O]2+: A Model for Coenzyme B12

Ligand substitution of trans-[Co^III(en)₂(Me)H₂O]²⁺ was studied for pyrazole, 1,2,4-triazole and N-acetylimidazole as entering nucleophiles. These displace the coordinated H₂O molecule trans to the methyl group to form trans-[Co(en)₂(Me)azole]. Stability constants at 18°C for the substitution of H₂O by pyrazole, 1,2,4-triazole and N-acetylimidazole are 0.7 ± 0.1, 13.8 ± 1.4 and 1.7 ± 0.2 M^?1, respectively. Second order rate constants at the same temperature for the reaction of trans-[Co^III(en)₂(Me)H₂O]²⁺ with pyrazole, 1,2,4-triazole and N-acetylimidazole are 161 ± 12, 212 ± 11 and 12.9 ± 1.6 M^?1 s^?1, respectively. Activation parameters (ΔH^≠, ΔS^≠) are 67 ± 6 kJ mol^?1, + 27 ± 19 J K^?1 mol^?1; 59 ± 2 kJ mol^?1, + 1 ± 6 J K^?1 mol^?1 and 72 ± 4 kJ mol^?1, + 23 ± 14 J K^?1 mol^?1 for reactions with pyrazole, 1,2,4-triazole and N-acetylimidazole, respectively. Substitution of coordinated H₂O by azoles follows an I_d mechanism.     

Activation of C2H6, C3H8, HC(CH3)3, and c-C3H6 by gas-phase Ru+ and the thermochemistry of Ru-ligand complexes

The reactions of Ru⁺ with C₂H₆, C₃H₈, HC(CH₃)₃, and c-C₃H₆ at hyperthermal energies have been studied using guided ion beam mass spectrometry. It is found that dehydrogenation is efficient and the dominant process at low energies in all four reaction systems. At high energies, C-H cleavage processes dominate the product spectrum for the reactions of Ru⁺ with ethane, propane, and isobutane. C-C bond cleavage is a dominant process in the cyclopropane system. The reactions of Ru⁺ are compared with those of the first-row transition metal congener Fe⁺ and the differences in behavior and mechanism are discussed in some detail. Modeling of the endothermic reaction cross sections yields the 0-K bond dissociation energies (in eV) of D ₀(Ru-H)=2.27±0.15, D ₀(Ru⁺-C)=4.70±0.11, D ₀(Ru⁺-CH)=5.20±0.12, D ₀(Ru⁺-CH₂)=3.57±0.05, D ₀(Ru⁺-CH₃)=1.66±0.06, D ₀(Ru-CH₃)=1.68±0.12, D ₀(Ru⁺-C₂H₂)=1.98±0.18, D ₀(Ru⁺-C₂H₃)=3.03±0.07, and D ₀(Ru⁺-C₃H₄)=2.24±0.12. Speculative bond energies for Ru⁺=CCH₂ of 3.39±0.19 eV and Ru⁺=CHCH₃ of 3.19±0.15 eV are also obtained. The observation of exothermic processes sets lower limits for the bond energies of Ru⁺ to ethene, propene, and isobutene of 1.34, 1.22, and 1.14 eV, respectively.     

The rate of the gas phase iodination of cyclobutane. The heat of formation of the cyclobutyl radical

The gas phase iodination of cyclobutane was studied spectrophotometrically in a static system over the temperature range 589° to 662°K. The early stage of the reaction was found to correspond to the general mechanism where the Arrenius parameters describing k₁ are given by log k₁/M^?1 sec^?1 = 11.66 ± 0.11 – 26.83 ± .31/θ, θ = 2.303RT in kcal/mole. The measured value of E₁, together with the fact that E_?1 = 1 ± 1 kcal/mole, provides ΔH(c-C₄H_7.) = 51.14 ± 1.0 kcal/mole, and the corresponding bond dissociation energy, D(c-C₄H₇? H) = 96.8 ± 1.0 kcal/mole. A bond dissociation energy of 1.8 kcal/mole higher than that for a normal secondary C? H bond corresponds to one half of the extra strain energy in cyclobutene compared to cyclobutane and is in excellent agreement with the recent value of Whittle, determined in a completely different system. Estimates of ΔH and entropy of cyclobutyl iodide are in very good agreement with the equilibrium constant K₁₂ deduced from the kinetic data. Also in good agreement with estimates of Arrhenius parameters is the rate of HI elimination from cyclobutyl iodide.     

Substituenteneffekte auf die C–C-Bindungsstärke, 8. Standardbildungsenthalpien und Spannungsenthalpien von 1,1,2,2-Tetraethylethylenglykol-dimethylether und D,L-1,2-Dimethyl-1,2-diphenylethylenglykol-dimethylether

Effects of Substituents on the Strength of C - C Bonds, 8¹. - Heats of Formation and Strain of 1,1,2,2-Tetraethylethylene Glycol Dimethyl Ether and D,L .-1,2-Dimethyl-l,2-diphenylethylene Glycol Dimethyl Ether The heats of combustion of the title compounds 1 and 2 were measured calorimetrically with the result (kcal mol ^-1, s. d. in parentheses) ΔH°_c = − 1880.1 (± 0.6) and − 2373.3 (± 1.4). The heat of vaporisation of 1 ΔH^v = 14.3 (± 0.3) and the heat of sublimation of 2 ΔH^sub = 27.2 (± 0.5) were derived from their temperature dependance of the vapor pressure. The latter were determined between 30 and 80°C using a flow method. The resulting standard heats of formation ΔH°_t(g) = −122.4 (± 0.7) and −43.8 (±1.5) for 1 and 2 correspond to a strain enthalpy (_s) of 15.9 and 8.0 kcal mol^-1, respectively. The steric strain of the dimethoxyethanes 1 and 2 is about one fourth lower than the strain of the corresponding dimethylethanes 3 and 4 bearing the same substituents. Thus, a methoxy group causes less steric stress than a methyl group.     

Thermodynamic Studies of Bi-Univalent Electrolytes. VI. Thermodynamics of Cadmium Acetate from E. M. F. and Calorimetric Measurements

E. M. F. of the Cell, Cd-Hg (2-phase)/CdAc₂(m), Hg₂Ac₂(s)/Hg was measured at 20°, 25°, 30° and 40°C. The standard e. m. f. of the cell, Cd/CdAc₃(m), Hg₂Ac₂(c)/Hg was evaluated as E°=1.1500?11.09×10^?4T+1.06×10^?8T² The thermodynamic data of the reaction, Cd(c) + Hg₂Ac₂(c)=2Hg(l)+Cd⁺⁺(aq)+2Ac^?(aq) at 25°C were estimated as ΔF°=?42,139, ΔH°=?48,698 cal mole^?1 and ΔS°=?22.0 cal deg^?1 mole^?1 at 25°C. The thermodynamic data for the formation of Hg₂Ac₂(s) were evaluated as ΔF_f°=?202.3, ΔH_f°=?154.5 Kcal mole^?1 and S°=72.9 cal deg^?1 mole^?1. From measurements of the heats of solution of CdAc₂·2H₂O in aqueous solution, the relative partial molal enthalpies of cadmium acetate in aqueous solution were estimated.     

Quenching of I(2P½) by R-OH compounds. Influence of the alkyl group on the quenching efficiency

The deactivation of I(²P_½) by R-OH compounds (R = H, C_nH_2n+1) was studied using time-resolved atomic absorption at 206.2 nm. The second-order quenching rate constants determined for H₂O, CH₃OH, C₂H₅OH, n-C₃H₇OH, i-C₃H₇OH, n-C₄H₉OH, i-C₄H₉OH, s-C₄H₉OH, t-C₄H₉OH, are respectively, 2.4 ± 0.3 × 10⁻¹², 5.5 ± 0.8 × 10⁻¹², 8 ± 1 × 10⁻¹², 10 ± 1 × 10⁻¹², 10 ± 1 × 10⁻¹², 11.1 ± 0.9 × 10⁻¹², 9.8 ± 0.9 × 10⁻¹², 7.1 ± 0.7 × 10⁻¹², and 4.1 ± 0.4× 10⁻¹² cm³ molec⁻¹ s⁻¹ at room temperature. It is believed that a quasi-resonant electronic to vibrational energy transfer mechanism accounts for most of the features of the quenching process. The influence of the alkyl group and its role in the total quenching rate is also discussed. © 1997 John Wiley & Sons, Inc.     

The photolysis of SO2 at 3080 Å in the presence of cis- and trans-1,2-difluoroethylene

The photolysis of SO₂ at 3080 Å, FWHM = 150 Å, and 22°C has been investigated in the presence of cis- and trans-C₂F₂H₂. Quantum yield measurements for the photosensitized isomerization of cis-C₂F₂H₂ to trans-C₂F₂H₂ have been made for a variation in the [SO₂]/[cis-C₂F₂H₂] ratio from 0.992 to 253. The results fit a mechanism which is consistent with the SO₂(³B₁) state being the reactive excited state of sulfur dioxide. A mechanism employing only the SO₂(¹B₁) and SO₂(³B₁) excited states is quite satisfactory to rationalize the data. A value for the SO₂ collisionally induced intersystem crossing efficiency from SO₂(¹B₁) to SO₂(³B₁) of 0.35 ± 0.14 was estimated while the cis-C₂F₂H₂ efficiency was found to be 0.030 ± 0.012. The rate constant at 22°C for the removal of SO₂(³B₁) molecules by cis-C₂F₂H₂ was found to be (1.43 ± 0.13) × 10¹⁰1./mole · sec. A photostationary composition, [cis]/[trans] = 1.0 ± 0.1, was found from prolonged irradiations of SO₂ in the presence of the cis and trans isomers.     

Mass Spectrometric Investigations of Thermodynamic Properties of the RbCl/GdCl3 System

The vaporization of pure RbCl, GdCl₃, and RbCl‐GdCl₃ samples of different phase compositions was investigated in the temperature range between 666 K and 982 K by use of the Knudsen effusion mass spectrometry. The gaseous species RbCl, Rb₂Cl₂, GdCl₃, and RbGdCl₄ were identified in the equilibrium vapours and their partial pressures were determined. The enthalpy of dissociation of RbGdCl₄(g), Δ_dissH°(859 K) = 263.1 ± 7.7 kJ mol^—1, was evaluated by second law treatment of the equilibrium partial pressures. The thermodynamic activities of RbCl and GdCl₃ were obtained at 800 K in the two‐phase fields {Rb₃GdCl₆(s) + liquid} and {RbGd₂Cl₇(s) + GdCl₃(s)}. The Gibbs free energies of formation of the pseudo‐binary phases Rb₃GdCl₆(s), Δ_fG°(800 K) = —75.1 ± 2.5 kJ mol^—1 and RbGd₂Cl₇(s), Δ_fG°(800 K) = —40.6 ± 1.2 kJ mol^—1, were evaluated from the thermodynamic activities of the components. The results are compared with the available literature data.     

The heats of formation of NO3− and NO3− association complexes with HNO3 and HBr

The equilibrium constant for the reaction has been determined between 331 and 480°K using a variable-temperature flowing afterglow. These data give ΔH°(1) = -1.03 ± 0.21 kcal/mol and ΔS°(1) = —4.6 ± 1.0 cal/mol°K. When combined with the known thermochemical values for HBr, Br^?, and HNO₃, this yields ΔH(NO₃^?) = -74.81 ± 0.54 kcal/mol and S(NO₃^?) = 59.4 cal/mol·°K. In addition ΔH_n-1,n and ΔS_n-1,nfor the gas-phase reactions were determined for n = 2 and 3. The implications of these measurements to gas-phase negative ion chemistry are discussed.     

Studies on the composition and kinetics of chromium(III)-alanine system

Kinetics of the complex formation of chromium(III) with alanine in aqueous medium has been studied at 45, 50, and 55°C, pH 3.3–4.4, and μ = 1 M (KNO₃). Under pseudo first-order conditions the observed rate constant (k_obs) was found to follow the rate equation: Values of the rate parameters (k_an, k, K_IP, and K) were calculated. Activation parameters for anation rate constants, ΔH^≠(k_an) = 25 ± 1 kJ mol^?1, ΔH^≠(k) = 91 ± 3 kJ mol^?1, and ΔS^≠(k_an) = ?244 ± 3 JK^?1 mol^?1, ΔS^≠(k) = ?30 ± 10 JK^?1 mol^?1 are indicative of an (I_a) mechanism for k_an and (I_d) mechanism for k routes (‥substrate Cr(H₂O) is involved in the k route whereas Cr(H₂O)₅OH²⁺ is involved in k′ route). Thermodynamic parameters for ion-pair formation constants are found to be ΔH°(K_IP) = 12 ± 1 kJ mol^?1, ΔH°(K) = ?13 ± 3 kJ mol^?1 and ΔS°(K_IP) = 47 ± 2 JK^?1 mol^?1, and ΔS°(K) = 20 ± 9 JK^?1 mol^?1.     

Conformational Analysis. XIX properties and reactions of 1,3-oxathianes VIII A 1H NMR conformational study of methyl-substituted derivatives

The addition of thioacetic acid to unsaturated alcohols or acids was utilized to obtain mercaptoalkanols which were condensed with suitable carybonyl compounds to prepare 24 methyl-substituted 1,3-oxathianes. The ¹H NMR spectra of the 1,3-oxathiane products were recorded at 60, 100 and/or 300 MHz and fully analysed. The results are best explained by a chair form which is completely staggered in the C-4? C-5? C-6 moiety ψ₄₅ or (ψ₅₆=60±1°). 1,3-Oxathianes having syn-axial 2,4- (and/or 2,6-) methyl-methyl interactions exist appreciably, if not exclusively, in twist forms. The vicinal coupling constants lead to the conformational free energies of axial methyl groups at C-4, ΔG°=7.4±0.4 kJ mol^?1, and at C-5, ΔG°=3.7±0.3 kJ mol^?1, in good agreement with previous estimates. They also show that both r-4,cis-5,trans-6- and r-4,trans-5,trans-6- trimethyl-1,3-oxathianes greatly favour the chiar form where the methyl group at C-4 is axial. The chair-twist energy parameters are reestimated at ΔH°_CT 27.0 kJ mol^?1, ΔS°_CT 11.6J mol^?1K^?1, and ΔG°_CT(298) 23.5 kJ mol^?1 for a 2,5-twist form.     

Synthesis and Diels-Alder Reactivity of 2,3,5,6-Tetramethylidenenorbornane

Pd-catalyzed double carbomethoxylation of the Diels-Alder adduct of cyclo-pentadiene and maleic anhydride yielded the methyl norbornane-2,3-endo-5, 6-exo-tetracarboxylate ( 4 ) which was transformed in three steps into 2,3,5,6-tetramethyl-idenenorbornane ( 1 ). The cycloaddition of tetracyanoethylene (TCNE) to 1 giving the corresponding monoadduct 7 was 364 times faster (toluene, 25°) than the addition of TCNE to 7 yielding the bis-adduct 9 . Similar reactivity trends were observed for the additions of TCNE to the less reactive 2,3,5,6-tetramethylidene-7-oxanorbornane ( 2 ). The following second order rate constants (toluene, 25°) and activation parameters were obtained for: 1 + TCNE → 7 : k₁ = (255 + 5) 10^?4 mol^?1 · s^?1, ΔH≠ = (12.2 ± 0.5) kcal/mol, ΔS≠ = (?24.8 ± 1.6) eu.; 7 + TCNE → 9 , k₂ = (0.7 ± 0.02) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.1 ± 1.0) kcal/mol, ΔS≠ = ( ?30 ± 3.5) eu.; 2 + TCNE → 8 : k₁ = (1.5 ± 0.03) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.8 ± 0.7) kcal/mol, ΔS≠ = (?26.4 ± 2.3) eu.; 8 + TCNE → 10 ; k₂ = (0.004 ± 0.0002) 10^?4 mol^?1 · s^?1, ΔH≠ = (17 ± 1.5) kcal/mol, ΔS≠ = (?30 ± 4) eu. The possible origins of the relatively large rate ratios k₁/k₂ are discussed briefly.     

Thermochemical properties of free radicals from G3MP2B3 calculations

For a set of 32 selected free radicals, energy minimum structures, harmonic vibrational wave numbers ω_e, principal moments of inertia I_A, I_B, and I_C, heat capacities C°_p(T), entropies S°(T), thermal energy contents H°(T) ? H°(0), and standard enthalpies of formation Δ_fH°(T) were calculated at the G3MP2B3 level of theory in the temperature range 200–3000 K. In this article, thermodynamic functions at T = 298.15 K are presented and compared with recent experimental values. The mean absolute deviation between calculated and experimental Δ_fH°(298.15) values resulted in 3.91 kJ mol^?1, which is close to the average experimental uncertainty of ± 3.55 kJ mol^?1. The influence of hindered rotation on thermodynamic functions is studied for isopropyl and tert‐butyl radicals. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 550–560, 2002