Slurry Nebulization in Plasmas for Analysis of Inorganic Materials

Abstract

This review summarizes and discusses the preparation of slurries for analysis of inorganic materials by inductively coupled plasma optical emission spectrometry (ICP‐OES) and inductively coupled plasma mass spectrometry (ICP‐MS). Details about the grinding step for slurry preparation, the stabilization of slurries, and the calibration strategies are critically discussed. Typical applications described in the literature and the state‐of‐the‐art including advantages and limitations of slurry analysis are presented.     

Volcanic glass under fire – a comparison of three complementary analytical methods

The two obsidian sources from the island of Melos (Greece), Agia Nychia and Demenegakion, are chemically characterized by three complementary analytical techniques. Ion beam analysis (IBA) comprising particle induced X‐ray emission and particle induced gamma‐ray emission, neutron activation analysis (NAA) and laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) is applied to the same set of geological obsidian samples. The combination of methods allows a more complete characterization of obsidian sources and reveals a highly specific chemical composition, the so‐called chemical fingerprint. This multi‐methodical approach checks also the self‐consistency of the analytical results and shows not only the most reliable and characteristic key elements Co and Sc but also Fe, Ca and Ti of Melos obsidian deposits. NAA contributes the largest number of reliable elements to the most unambiguous chemical fingerprint comprising in total of 41 elements. Therefore, NAA is the most suitable analytical method for a clear identification of Melos obsidian deposits. Moreover, the accuracy of methods is demonstrated by the excellent correspondences (calculated correlation coefficient R² = 1.00 for IBA and NAA, R² = 0.99 for LA‐ICP‐MS) between determined analytical results obained by IBA, NAA and LA‐ICP‐MS and certified values of the reference glass BAM‐S005B. Copyright © 2013 John Wiley & Sons, Ltd.     

Application of Multivariate Techniques in Optimization of Spectroanalytical Methods

Abstract

The present article describes fundamentals and applications of multivariate techniques used for the optimization of analytical procedures and systems involving spectroanalytical methods such as flame atomic absorption spectrometry (FAAS), electrothermal atomic absorption spectrometry (ETAAS), inductively coupled plasma optical emission spectrometry (ICP OES), and inductively coupled plasma mass spectrometry (ICP‐MS), considering the main steps of a chemical analysis. This way, applications of experimental designs in optimization of sampling systems, digestion procedures, preconcentration procedures, instrumental parameters of quantification steps of analytical methods, and robustness tests have been summarized in this work.     

Preliminary in situ teeth study of the narrow‐ridged finless porpoises remains using microsynchrotron radiation X‐ray fluorescence and laser ablation inductively coupled plasma mass spectrometry

In recent years, a growing number of the narrow‐ridged finless porpoises were found dead near the Yangtze River estuary. In this region lived two sympatric subspecies, respectively, the East Asian finless porpoise and the Yangtze finless porpoise. So far, it is difficult to distinguish these two subspecies due to their similar shape and unavailable molecular marker. In this work, synchrotron radiation X‐ray fluorescence (SRXRF) and laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) were applied for in situ teeth trace chemical analysis to study subspecies identification and migration near the Yangtze River estuary. Teeth Sr concentration and ⁸⁷Sr/⁸⁶Sr ratios, determined by SRXRF and LA‐ICP‐MS techniques, have potential application in the identification of the finless porpoise subspecies. Only one (Sample S4) of the six samples was concluded as the Yangtze finless porpoise, and the others were the East Asian finless porpoise. This study also proved that the Sr/Ca and Zn/Ca ratios could be used as a useful environmental indicator to detect the migratory history of narrow‐ridged finless porpoises.     

Molybdenum,Platinum, and Tantalum Metal Atomizers or Vaporizers in Analytical Atomic Spectrometry

Abstract

The application of metal (tantalum, molybdenum, and platinum) devices in analytical atomic spectrometry is reviewed in this article. These metal devices have been employed in various analytical atomic spectrometric techniques for more than three decades, mainly as electrothermal atomizers or electrothermal vaporizers, in various physical shapes, such as tubes, platforms, loops, and wires (or coils/filaments). Their application spans from atomic absorption spectrometry (AAS), atomic emission spectrometry (AES) atomic fluorescence spectrometry (AFS), inductively coupled plasma atomic emission spectrometry (ICP‐AES) to inductively coupled plasma mass spectrometry (ICP‐MS). The analytical figures of merit and the practical applications reported for these metal devices are reviewed, and the atomization mechanism on these metal atomizers is briefly summarized, too. In addition, other applications of the metal devices are discussed, including analyte preconcentration by electrodeposition and sequential metal vapor elution analysis (SMVEA). Furthermore, the application of these metals in graphite furnaces encompasses the schemes with the metals in the form of furnace linings, platforms, or impregnated salts.     

Comparison of Inductively Coupled Plasma with Classical Analytical Techniques in the Analysis of Southern Oregon Lithia Water: Inclusion of a Local Resource in the Undergraduate Chemistry Curriculum

Abstract

Lithia water, a community resource of local historical significance, is described as a central theme in the undergraduate analytical chemistry sequence. A statistical comparison of the classical determination of major cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and anions (HCO₃ ^?, Cl^?) reinforces statistical and charge‐balance concepts covered in analytical chemistry. Subsequent determination of these major cations by inductively coupled plasma (ICP) enables students to statistically evaluate the presence of bias between instrumental and classical methods. The effect of easily ionized elements on ICP calibration sensitivity and linearity via the use of cesium as an ionization suppressor is reported.     

Plasma Source Mass Spectrometric Analysis of Biological and Environmental Samples: Dealing with Potential Interferences

Introduction

Effectiveness of a plasma to dissociate the sample into ions has been the basis of the development of plasma source optical emission spectrometer (OES) and mass spectrometer (MS) for elemental and isotope analysis. Among the available ways of inducing and sustaining a plasma, only inductively coupled plasma (ICP) has gained commercial application. The ICP is an electrodeless discharge in a gas at atmospheric pressure, maintained by energy coupled to it from a radio frequency generator. This is done by a coupling coil, which functions as the primary of radio frequency transformer, the secondary of which is created by the discharge itself (Jarvis et al., 1992). An ICP-MS system consists of a plasma source (ICP) interfaced with a quadrupole MS. The plasma ionizes the elements of the sample and the MS serves as a detector that measures the mass to charge (m/z) ratio of the element(s) or isotope(s) of interest. Generally an argon (Ar) plasma is used, but other plasma sources have also been proposed (Brown et al., 1988; Satzger et al., 1987).     

Atomic spectrometry and atomic mass spectrometry in bioanalytical chemistry

Abstract

Atomic spectrometry and atomic mass spectrometric (MS) techniques have been playing crucial roles in the field of biosciences. They detect elements with relatively high sensitivities and are thus applicable to a wide range of analytical targets. In the past decade, determination of bio-relevant metallic elements continues to be of interest, while particularly noteworthy are methods developed for small molecules, peptides, proteins, nucleic acids and even cells that well exploited the bio-analytical strengths of atomic spectrometry and atomic MS, either in a direct or indirect manner. Quantitation, as well as speciation and imaging analyses are all involved. The present review aims to assimilate recent advances in bio-analysis utilizing atomic spectrometry and atomic MS, primarily covering the period of 2013–2018, in an attempt to provide readers insight into the developing trends of this research frontier. Followed by concluding remarks and perspectives, the applications are divided into the following four catalogs: (i) toxicologically important metal-containing species, with an emphasis on quantitative and imaging analysis; (ii) quantitation of biomolecules using naturally occurring heteroatoms; (iii) exogenous metal ion or nanoparticle tagging-based strategies in bioassays; and (iv) label-free detection of biomolecules.     

Procedures of Separation and Pre‐concentration for Molybdenum Determination Using Atomic Spectrometry—a Review

Abstract

The literature concerning the improvement of atomic and ionic procedures for molybdenum determination through separation and pre‐concentration were updated. Analytical procedures based on flame atomic absorption spectrometry (AAAS), electrothermal or graphite furnace atomic absorption spectrometry (GFAAS), inductively coupled plasma optical emission spectrometry (ICP‐OES), and inductively coupled plasma mass spectrometry were reviewed taking into consideration the preliminary steps, which can enhance the selectivity and sensitivity based on co‐precipitation, solvent extraction, and solid‐phase extraction. Both in‐batch and on‐line procedures were considered.     

Glow Discharge as a Tool for Surface and Interface Analysis

Abstract

This review article focuses on the analytical capabilities of glow discharge optical emission spectrometry (GD‐OES) and mass spectrometry (GD‐MS) to perform compositional depth profiling (GD‐CDP). The properties of the Grimm‐type glow discharge as well as basic processes of sputtering are described and their influence on the GD as a surface and interface analytical tool are discussed. A series of examples from recent literature ranging from computer hard disks to molecular monolayers on copper substrates are presented to illustrate the excellent depth resolution that can be achieved with GD surface analytical techniques. The conditions for obtaining nanometer or even atomic‐layer depth resolution are discussed. Following this introduction is the possibilities of the technique a selection of applications principally chosen from our laboratories, demonstrating that GD‐OES and GD‐MS can be successfully employed as an analytical tool assisting the development of new materials and coatings. The applications cover common industrial tasks such as heat treatments, studies of diffusion processes at interfaces, and electrochemical depositions for biocompatible material. However, limitations and known artifacts are also discussed.     

电感耦合等离子体原子发射光谱/质谱法在中药微量元素及形态分析中的应用

本文对近年来电感耦合等离子体原子发射光谱法（ICP－AES）和电感耦合等离子体质谱（ICP－MS）在中药微量元素及形态分析中的应用进行了评述，讨论了应用ICP－AES／MS技术测定中药微量元素样品处理和各种分析方法，引用文献58篇。微波消解可作为中药微量元素分析理想的样品处理方法；ICP－AES／MS及各种联用技术在中药微量元素含量及形态分析中将发挥越来越重要的作用。     

Comparison of Mid-IR with NIR in Polymer Analysis

Abstract

Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) represents a powerful technique for analyzing biological samples due to the ultrahigh resolving power, high mass accuracy, and multiple-stage tandem mass spectrometry (MSⁿ). With the advent of electrospray ionization (ESI), determinations of binding stoichiometry and binding sites for protein complexes are available. This review summarizes the recent FT-ICR MS applications in characterization of protein complexes, such as protein-peptide complexes, protein-protein complexes, and protein-nucleic acid complexes. Especially, combined with ECD and SWIFT techniques, FT-ICR MS has unique ion manipulation capabilities and plays a critical role in the analysis of protein complexes.     

Fast Atom BombardmenUMass Spectrometry (FABMS) and Its Industrial Applications

Abstract

“Soft ionization” techniques which permit direct desorptton of gasphase analyte ions without the need for vaporization have greatly expanded the potential applications of mass spectrometry (MS). By using such techniques as field desorption (FD), desorption chemical ionization (DCI), and fast atom bombardment (FAB), thermally labile and higher molecular weight compounds are now amenable to MS exambation without significant thermal degradation. This ability to ionize higher molecular weight species has been paralleled by high field, inhomogeneous magnet development, allowing magnetic sector mass spectrometers to reach 10,000ν at full accelerating voltage. These advancements in ionization techniques and instrument design now permit useful MS data for organic compounds of several thousand molecular weight to be produced on a near routine basis in many laboratories.     

Microplasma Technology and Its Applications in Analytical Chemistry

Abstract

This review article describes some existing microplasma sources and their applications in analytical chemistry. These microplasmas mainly include direct current glow discharge (DC), microhollow-cathode discharge (MHCD) or microstructure electrode (MSE), dielectric barrier discharge (DBD), capacitively coupled microplasmas (CCμPs), miniature inductively coupled plasmas (mICPs), and microwave-induced plasmas (MIPs). The historical development and recent advances in these microplasma techniques are presented. Fundamental properties of the microplasmas, the unique features of the reduced size and volume, as well as the advantageous device structures for chemical analysis are discussed in detail, with the emphasis toward detection of gaseous samples. The analytical figures of merit obtained using these microplasmas as molecular/elemental-selective detectors for emission spectrometry and as ionization sources for mass spectrometry are also given in this review article.     

Determination of Non-metals by High Performance Liquid Chromatography with Inductively Coupled Plasma Detection

Abstract

High performance liquid chromatography (HPLC) has often been employed in the separation and speciation of metal containing compounds. One of the most sensitive devices used for detecting those compounds after the separation is the inductively coupled plasma (ICP). The similar flow rates for these two techniques render the coupling of the devices trivial, usually involving only a short length of capillary tubing. Upon entering the plasma, species are typically determined either via atomic emission spectrometry or mass spectrometry. HPLC-ICP devices have been employed less frequently for the determination of non-metals. This review will describe the applications of HPLC-ICP techniques to the determination of compounds containing carbon, sulfur, phosphorus, and the halogens. The instrumentation used for each application will be described, and the performance of the systems will be summarized.     

An integrated spectroscopic approach to investigate pigments and engobes on pre‐Roman pottery

Painted Canosa ceramics were examined to identify the nature of the pigments employed and their manufacturing technology. A multi‐technique approach was used, comprising Raman microspectroscopy and laser ablation hyphenated to inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS). The analysed samples were mainly produced for burial in tombs and were not intended for everyday use. They belong to the period between the end of the mid‐7th century and the first half of the 4th century BC, and were excavated from the Toppicelli archaeological district near the suburbs of Canosa (Puglia, Italy). Forty‐eight pottery fragments were available for this study. No handling of the samples was required for the Raman study, and it was possible to excise the pigmented layer in such a way that the lacunae were not distinguishable to the naked eye due to the micrometric size of the laser spot as far as LA‐ICP‐MS is concerned. Their combination turned out to be quite useful for the investigation of these archaeological materials: the chemical nature of the white, red, brown and black pigments employed in the pottery manufacture was investigated. Iron and manganese compounds were identified as the red and brown/black main colouring substances, respectively; on the other hand, whites and engobes (whitish slips) were based on kaolinite. This set of colouring substances is of importance, as it enabled the artisan to obtain in one oxidising firing cycle brown, black and red paints. Finally, the finding of manganese black in these Canosa potsherds confirms that Canosa was an important centre connecting the near East to central Italy and Europe since the pre‐Roman age. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopy of synthetic,geological and biological vaterite: a Raman spectroscopic study

Raman spectroscopy was used to study vaterite samples of biological, geological and synthetic origin. The Raman band positions and the full width at half‐maximum (FWHM) of the lattice modes and the internal modes of the carbonate ion of all specimens show no significant differences between vaterites of different origin. With increasing Mg concentrations, synthetic vaterite samples show increasing FWHM in the region of the lattice modes and the three ν₁ bands, whereas no change in luminescence was detected. In contrast, in situ measurements of vaterite areas in freshwater cultured pearls (FWCPs) by laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) together with the Raman spectra obtained at the same points show that the luminescence intensity in biological samples is affected by the magnesium content. The Raman spectroscopic features of vaterite and parisite‐(Ce) are compared, and their similarities suggest that the structure of vaterite contains at least three crystallographically independent carbonate groups and similar carbonate group layers. A band at 263 cm⁻¹ is observed for the first time in this study, whereas it could be demonstrated that bands previously reported at 130 and 190 cm⁻¹ do not belong to vaterite. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantitative determination of essential and trace element content of medicinal plants and their infusions by XRF and ICP techniques

Macro‐ and microelement contents of five medicinal plants (Taraxacum officinale Weber, Eucalyptus globulus Labill, Plantago lanceolata L., Matricaria chamomilla L. and Mentha piperita L.) and their infusions were evaluated by the combined use of x‐ray fluorescence (WDXRF and EDXRF, bulk raw plants) and inductively coupled plasma (ICP‐MS and ICP‐AES, infusions) techniques. The analytical methods allow the determination of 17 elements (Na, Mg, Al, Si, P, S, K, Ca, Ti, Mn, Fe, Cu, Zn, As, Rb, Sr, and Pb) both in plants and in the infusions. The use of XRF techniques offer a good multielemental approach for the rapid quality control of bulk raw plant materials whereas ICP techniques are well suited for the analytical control of infusions in order to ascertain the nutritional role of medicinal plants and the daily dietary intake. Copyright © 2005 John Wiley & Sons, Ltd.     

Application of high‐energy polarized energy‐dispersive x‐ray fluorescence spectrometry to the determination of trace levels of As,Hg, and Pb in certifiable color additives

Advances in x‐ray fluorescence (XRF) using high‐energy polarized energy‐dispersive (ED)XRF spectrometry (PEDXRF) were applied to the determination of trace As, Hg, and Pb in various color additives subject to batch certification by the U.S. Food and Drug Administration (FDA). The objectives of this study were to simplify sample preparation for quantitative determination of these elements and, if possible, to achieve improved sensitivity and detection limits compared to techniques currently used for certification. PEDXRF was compared with wavelength‐dispersive x‐ray fluorescence spectrometry (WDXRF) and inductively coupled plasma – mass spectrometry (ICP‐MS) for the analysis of trace levels of As, Hg, and Pb in certifiable color additives. For these light matrices, PEDXRF provided better signal‐to‐noise and allowed quantitation in smaller amounts of color additive relative to WDXRF and equal or better precision to ICP‐MS. Determination of these trace elements in a variety of color additives was possible relative to calibrations generated from one color additive using specimens prepared simply by pouring the color additive powder into an XRF sample cup. Published 2016. This article is a U.S. Government work and is in the public domain in the USA