Ion exchange on resins with temperature-responsive selectivity III. Influence of complex formation stoichiometry on temperature dependence of resin selectivity

The influence of temperature (293308 K 1:1 IDA:Ni2+ complex is dominating. The Cu2+-Ni2+ exchange equilibrium from sulfate medium is characterized by the formation of nickel complexes of both stoichiometries within the whole temperature range studied. The dependence of alpha on T in Zn2+-Co2+ exchange system has been shown to be weaker than that in the Cu2+-Ni2+ system. This result is in a good agreement with the predictions made in the first communication of this series. The results of thermostripping experiments carried out for Cu2+-Co2+ exchange have shown that the efficiency of the thermostripping process depends on both the interval of working temperatures (deltaT) and its position on the temperature scale. The efficiency of thermostripping rises with an absolute deltaT value and also increases following the shift of temperature interval to the lower temperature range.     

Removal of zinc metal ion (Zn) from its aqueous solution by kaolin clay mineral: A kinetic and equilibrium study

A laboratory batch study has been performed to study the effect of various physic-chemical factors such as initial metal ion concentration, solution pH, and amount of adsorbent, contact time and temperature on the adsorption characteristics of zinc (Zn²⁺) metal ions onto kaolin. It has been found that the amount of adsorption of zinc metal ion increases with initial metal ion concentration, contact time, solution pH but decreases with the amount of adsorbent and temperature of the system. Kinetic experiments clearly indicate that adsorption of zinc metal ion (Zn²⁺) on kaolin is a two steps process: a very rapid adsorption of zinc metal ion to the external surface is followed by possible slow decreasing intra-particle diffusion in the interior of the adsorbent which has also been confirmed by intra-particle diffusion model. The equilibrium time is found to be in the order of 60 min. Overall the kinetic studies showed that the zinc adsorption process followed pseudo-second-order kinetics among pseudo-first-order and intra-particle diffusion model. The different kinetic parameters including rate constant are determined at different initial metal ion concentration, solution pH, amount of adsorbent and temperature respectively. The equilibrium adsorption results are analyzed by both Langmuir and Freundlich models to determine the mechanistic parameters associated with the adsorption process. The value of separation factor, R_L from Langmuir equation also gives an indication of favorable adsorption. Finally thermodynamic parameters are determined at three different temperatures and it has been found that the adsorption process is exothermic due to negative ΔH° accompanied by decrease in entropy change and Gibbs free energy change (ΔG°).     

Strong complex formation of carbohydrates with metal ions at alkaline pH studied by ligand exchange chromatography

Summary At alkaline pH, carbohydrates are highly retained on a sulphonated polystyrene resin loaded with rare earth or uranyl metal ions. The complex formation is governed by the ionization of the carbohydrate moiety. pH and the type of metal ion were found to have a decisive influence on the complex formation. Binding of the metal ion to the cation exchanger and to different carbohydrates is described. The competitive complexation between solute and hydroxide to the metal ions is described as a ligand exchange reaction and a retention model is proposed. The ligand exchange column was used as precolumn in a coupled column separation system and the high selectivity is demonstrated by the separation of paracetamol glucuronide from a urine sample after filtration and direct injection.     

Adsorption of Cu(II), Zn(II), Ni(II), Pb(II), and Cd(II) from aqueous solution on Amberlite IR-120 synthetic resin

The adsorption of copper(II), zinc(II), nickel(II), lead(II), and cadmium(II) on Amberlite IR-120 synthetic sulfonated resin has been studied at different pH and temperatures by batch process. The effects of parameters such as amount of resin, resin contact time, pH, and temperature on the ion exchange separation have been investigated. For the determination of the adsorption behavior of the resin, the adsorption isotherms of metal ions have also been studied. The concentrations of metal ions have been measured by batch techniques and with AAS analysis. Adsorption analysis results obtained at various concentrations showed that the adsorption pattern on the resin followed Freundlich isotherms. Here we report the method that is applied for the sorption/separation of some toxic metals from their solutions.     

Selective metal sorption on cross-linked poly(vinylpyridine) resins

The sorption behaviour of several metal ions on five kinds of poly(4- or 2-vinylpyridine) resins, cross-linked with divinylbenzene, and with different surface properties, are examined. All the resins proposed sorb some metal ions effectively in a similar manner by anion-exchange, while the sorption of metal ions by complex formation with the pyridine moiety is strongly affected by the surface properties of the resins. A macroreticular poly(4-vinylpyridine) resin shows high affinity for copper and nickel ions in acetate buffer. Sodium chloride and/or methanol added to the working solutions influence the sorption capacities for metal ions. This resin was applied to the separation of copper/cobalt and nickel/cobalt and the concentration of copper from sea-water by a column operation.     

Treatment of humic acids with ferric, aluminum, and chromium ions in water

The interaction of ferric, aluminum, and chromium ions with humic acids at different pH of mixture has been investigated. The concentration of metal ions, bound with humic acid is proportional to the concentration of metal ion in water solution at pH 3 at low metal ion concentrations. The ratio of the number of ferric ions, bound with humic acid, to the number of acidic groups in humic acid is more than 1.5 at high ferric ion concentration in solution. That is bound with the formation of dimers of ferric ions and their treatment with acidic groups of humic acid. The radius of particles formed in the reaction of humic acid with ferric ion does not depend on the pH and decreases in the reaction with chromium and aluminum ions at pH higher than 4. An increase of metal ion concentration leads to the increase of the particle radius at low metal ion concentration reaching the constant value at high metal ion concentration and pH 6.1.     

Preparation, Properties and Mechanism of Inhomogeneous Calcium Alginate Ion Cross-linking Gel Microspheres

Inhomogeneous calcium alginate ion cross-linking gel microspheres,a novel ion absorbent,were prepared by dropping a sodium alginate solution to a calcium chloride solutioin via an electronic droplet generator.Calcium alginate microspheres have uniform particle sizes.a smooth surface and a microporous structure.The electrode probe reveals the inhomogeneous distribution of calcium ions with the highest concentration on the surface,and the lowest concentration in the cores of the spheres.As a novel ion adsorbent,calcium alginate gel microspheres have a lower limiting adsorption mass concentration,a higher enrichment capacity and a higher adsorption capacity for Pb^2 than usual ion exchange resins.The highest percentage of the adsorption is 99.79%.The limiting adsorption mass concentration is 0.0426mg/L.The adsorption capacity for Pb^2 is 644mg/g,Calcium alginate gel microspheres have a much faster ion exchange velocity than D418 chelating resin and D113 polyacrylate resin.The moving boundary model was employed to interpret the ion exchange kinetics process,which indicates that the ion exchange process is controlled by intraparticle diffusion of adsorbable ions.So the formation of inhomogeneous gel microspheres reduces the diffusion distance of adsorbable ions within the spheres and enhances the ion exchange velocity.Alginate has a higher selectivity for pb^2 than for Ca^2 and the selectivity coefficient KCa^Pb is 316. As an ion cross-linking gel,calcium alginate inhomogeneous microspheres can effectively adsorb heavy metal Pb^2 at a higher selectivity and a higher adsorption velocity.It is a novel and good ion adsorbent.     

A new sorbent for europium nitrate extraction: phosphonic acid grafted on polystyrene resin

A new chelating polymeric sorbent has been developed using polystyrene resin grafted with phosphonic acid. After characterization by FTIR and elementary analysis, the new resin has been investigated in liquid–solid extraction of europium(III). The results indicated that phosphonic resin could adsorb Eu(III) ion effectively from aqueous solution. The adsorption was strongly dependent on pH of the medium with enhanced adsorption as the pH value of 6.5. The influence of other analytical parameters including contact time, amount of resin, metal ion concentration, and ionic strength were investigated. The maximum uptake capacity of Eu(III) ions was 122.6 mg/g grafted resin at ambient temperature, at an initial pH value of 6.50. The overall adsorption process was best described by pseudo first-order kinetic. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. Furthermore, Eu(III) could be eluted by using 1.0 mol/L H₂SO₄ solution and the grafted resin could be regenerated and reused.     

Extraction of cobalt (II) and nickel (II) by a solvent impregnated resin containing bis(2,4,4-trimethylpentyl)monothiophosphinic acid

In the present work, studies have been conducted on the equilibrium distribution of cobalt (II) and nickel (II) between aqueous hydrochloric solution and macromolecular resin impregnated with bis(2,4,4-trimethylpentyl)monothiophosphinic acid (Cyanex302, HL). Effects of extraction time, pH values, metal ion concentration, and temperature were investigated. Analysis of the results shows that the extraction of the two metal ions can be explained assuming the formation of metal complexes in the resin phase with a general composition ML ₂. An extraction reaction is proposed and the equilibrium constants of the complexes were determined. The Freundlich isotherm and thermodynamic quantities, i.e., ΔG, ΔH and ΔS were also obtained. Both of the extraction reactions of cobalt (II) and nickel (II) are endothermic ones. The efficiency of the resin in the separation of cobalt (II) and nickel (II) is provided according to the separation factors. Under the experimental conditions employed, pH₅₀ values for cobalt (II) and nickel (II) are 3.76, 5.01, respectively. The logarithmic value of separation factor was calculated as 2.50.     

Synthesis and characterization of a new resin functionalized with 2-naphthol-3,6-disulfonic acid and its application for the speciation of chromium in natural water

A polystyrene divinyl benzene (8%) copolymer has been functionalized by coupling it through NN group with 2-naphthol-3,6-disulfonic acid (NDSA). The resulting resin has been characterized by elemental analysis, thermogravimetric analysis and infrared spectra. The hydrogen ion, water regain and metal ion capacities of the resin have been determined. Two forms of chromium show different exchange capacities at different pH values, viz. Cr(III) selectively retained at pH 6.5 whereas Cr(VI) retained at pH 1.5. Hence complete separation of the two forms of chromium is possible. The kinetic studies show that the exchange of Cr(III) and Cr(VI) follows second-order kinetics. The metal ion concentration was measured by flame atomic absorption spectrometry. The method has been successfully applied for the speciation of chromium in natural water samples.     

Synthetic functionalized terpolymeric resin for the removal of hazardous metal ions: synthesis,characterization and batch separation analysis

An effectual functionalized synthetic resin involving anthranilic acid/4‐nitroaniline/formaldehyde was synthesized for the detoxification of hazardous metal ions. The resin was characterized by Fourier transform infrared, ¹H, and ¹³C nuclear magnetic resonance spectroscopy, and its morphology was established through scanning electron microscope and X‐ray diffraction. The resin was analyzed by thermogravimetric analysis to assess the thermal stability, in which the resin could be used in high temperature aqueous solutions for the elimination of harmful metal ions. The ion‐exchange property of the resin was evaluated by batch technique for specific metal ions viz. Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Pb²⁺. The study was extended to three variations such as effect of metal ion uptake in the presence of various electrolytes in different concentrations, effect of pH, and effect of contact time. The outcome proved that the resin can be used as a strong cation‐exchanger to remove various metal ions from the solutions. The resin could be regenerated and reused with quantitative recovery of metal ions for few cycles. On comparison with the earlier reported resins, the synthesized resin has found excellent capability of metal ion recovery. The resin possesses an utmost ion‐exchange capacity, which is in good harmony with isotherm models and kinetics. Copyright © 2015 John Wiley & Sons, Ltd.     

Simultaneous recovery of cadmium and lead from aqueous effluents by a semi-continuous laboratory-scale polymer enhanced ultrafiltration process

Performance of a semi-continuous polymer enhanced ultrafiltration (PEUF) process has been investigated for the simultaneous recovery of cadmium and lead from binary mixtures. This method uses poly(acrylic acid) as water-soluble polymer to bind these metals. Experiments have taken place in a laboratory-scale system. Loading ratio (mg total metal ions/g polymer) and pH values for separation of cadmium and lead have been studied by means of preliminary experiments, analyzing their influence on permeate flux, metal rejection coefficients and separation factor.The proposed process includes three different stages: total retention of metal ions, selective separation and polymer regeneration. Operating pH values for total retention of metal ions and polymer regeneration processes are 5 and 2, respectively. Selective separation has been investigated working at an intermediate pH value. In this way, if a stream containing 12.5 ppm of each metal ion (1:1 in weight) is treated in the first stage, two different streams enriched in each metal ion are obtained in the second stage. Permeate stream is enriched in cadmium with a proportion near 5:1 in weight, and retentate is enriched in lead with a similar proportion.Finally, the three stages have been modelled successfully with a mathematical model based on conservation equations and chemical reactions taking place in solution.     

Reaction rates of heavy metal ions at goethite: relaxation experiments and modeling

In the present paper we extend our theory that calculates the fastest reaction step observable in suspensions containing charged microcrystals and heavy metal cations. The calculation requires the solution of the nonlinear Poisson-Boltzmann equation for nonsymmetric electrolytes plus the Nernst-Planck equation for transport of ions in electric fields. We find that the diffusional transport of ions to and from the surface is the rate-limiting process for our experimentally observed maximum rates. At low pH and low metal ion concentration the diffusion of metal ions is the rate-limiting step, whereas for high pH and high metal ion concentration the diffusion of the solvated protons controls the overall relaxation rate. The validity of this theory is checked for the reactions of Pb2+ and Cd2+ with goethite by means of pressure jump relaxation experiments over a wide range of temperature and pH. In all cases we observe fast processes (relaxation in the range of 10(3) s(-1)) in quantitative agreement with the theory, followed by slower processes, most probably caused by diffusion into the interior of the porous microcrystals.     

水杨酸型螯合树脂对Fe(III)离子的螯合吸附行为

以5-氨基水杨酸(ASA)为胺化试剂, 使氯甲基化的交联聚苯乙烯(CMCPS)微球表面的苄氯基团发生亲核取代反应, 制得了水杨酸型螯合树脂ASA-CPS. 研究了该螯合树脂对金属离子的螯合吸附行为, 探讨了其吸附热力学与吸附机理, 考察了介质pH值对树脂螯合吸附性能的影响以及树脂对不同金属离子的螯合吸附能力. 实验结果表明, 水杨酸型螯合树脂ASA-CPS 对重金属离子具有强螯合吸附性能, 尤其对Fe3+离子表现出很强的螯合吸附能力, 常温下吸附容量可达21 g/100 g. 吸附过程属熵驱动的化学吸附过程, 升高温度, 吸附容量增高; 在可抑制金属离子水解的pH范围内, 介质的pH值越高, 螯合吸附能力越强; 对于性质不同的金属离子, ASA-CPS的吸附性能是有差别的, 吸附容量的顺序为Fe3+>Ni2+>Cu2+>Zn2+.     

Chelating ion-exchangers containing N-substituted hydroxylamine functional groups: Part I. N-aroylphenylhydroxylamines

Chelating ion exchangers containing N-carbonylphenylhydroxylamine functional groups have been synthesized and their exchange behaviour with copper, cobalt, iron, vanadium and uranium investigated. Of the two polymers described, a linear oxime-carbonyl polymer exhibited chelating capacity as a function of pH analogous to the chelates formed by BPHA. An oxime-carbonyl polymer based on polyethyleneimine had high capacities for the metal ions studied, but the principal mode of reaction was by electron donation from nitrogen atoms. The absence of co-ion in metal ion capacity studies indicates the possibility of formation of 1:2 and 1:3 metal complexes with the resin. Separations of iron(II)-iron(III) and vanadium-iron appear possible.     

一种高选择性汞(Ⅱ) 吸附剂的制备和应用

利用两步反应法制备了溴联苯三酚红功能性硅胶(BPRSG),并通过静态平衡方法研究了该功能性硅胶对多种性质相近的金属离子的选择性吸附性能,考察了溶液pH值和搅拌时间对Hg?吸附率的影响。结果表明,在pH=7.0时,该固相萃取剂对Hg(Ⅱ)有特异的选择性吸附,可以实现与Pb(Ⅱ),Co(Ⅱ),Mn(Ⅱ),Zn(Ⅱ),Cu(Ⅱ),Cd(Ⅱ),Ni(Ⅱ)等金属离子的选择性分离,对Hg?的吸附平衡时间为30 min;最大吸附容量为4.80 mg/g。将该吸附剂制成微型固相萃取柱,用动态平衡法研究了柱流速、洗脱剂种类、洗脱速度和各种干扰离子对分离富集Hg(Ⅱ)的影响。在优化条件下,微柱对Hg?的最低富集浓度为10μg/L,富集倍率为170倍,柱容量为0.65 mg/g。20种常见离子不干扰Hg?的吸附,用1.0 mol/L醋酸即可洗脱Hg(Ⅱ),柱子可重复使用。将微柱用于环境水样中Hg?的固相萃取,回收率在95.5%～98.0%之间。     

Extraction of Copper(II) and Zinc(II) from Chloride Media with Mixed Extractants

Extraction of copper(II) and zinc(II) from acidic chloride solutions with mixtures of two extractants: a basic or solvating one and a chelating extractant was discussed. Processes for recovery and separation of Cu(II) from Zn(II) were proposed, which consist of the following steps: extraction from chloride media with the formation of metal chlorocomplex ion pair or solvate, scrubbing of chloride ions with an aqueous solution of appropriate pH with simultaneous transfer of the metal ion to the chelate, traditional stripping with sulphuric acid and conditioning of the basic extractant. Both effective recovery and separation of metal ions with simultaneous change of the system from the chloride to the sulphate state can be achieved. A bifunctional reagent, such as alkyl derivative of 8-hydroxyquinoline, can be also used instead of the extractant mixture.     

Sorption of proton and heavy metal ions on a macroporous chelating resin with an iminodiacetate active group as a function of temperature

A macroporous resin containing iminodiacetic groups (Lewatit) was investigated for its sorption properties towards proton and nickel(II) and cadmium(II). Different compositions of the aqueous phase, and different temperatures were examined. The stoichiometry, the exchange coefficients and the intrinsic constants of the sorption equilibria were obtained from the experimental data by using the Gibbs-Donnan model for the ion exchange resin. The intrinsic constants were found to be independent of the composition of the solution, so that they were used for characterizing the sorption equilibria. While the first intrinsic protonation constant of the active groups in the resin was found to depend on the temperature, the second one was independent. The sorption equilibrium of nickel in the resin was different from that of cadmium, being ascribable respectively to the formation of the complexes NiL and Cd(HL)(2). inside the resin. Their intrinsic complexation constants were found to be 10(-1.84) and 10(-3.64) at 25 degrees C. Compared to those of another resin with the same active groups, but not macroporous, they are higher. The dependence of the intrinsic constant on the temperature was also different for the two metals, allowing to evaluate a DeltaH degrees of +30.9 and of +13.7 kJ mol(-1) respectively. When a comparison is possible, these values are near to those in aqueous solution for the complexation with ligands of similar structure. These results can be used to achieve metal ion separation based on temperature variations.     

Sorption investigation on the removal of metal ions from aqueous solutions using chelating terpolymer resin

A novel chelating terpolymer resin has been synthesized from anthranilic acid, phenylhydrazine, and formaldehyde by condensation in glacial acetic acid. The structure of the chelating resin was clearly elucidated by use of a variety of spectral techniques, for example FTIR, and ¹H and ¹³C NMR spectroscopy. The average molecular weight of the terpolymer resin was determined by gel-permeation chromatography. The empirical formula and empirical weight of the resin were determined by elemental analysis. The physicochemical properties of the terpolymer resin were determined. Scanning electron microscopy was used to establish the surface features of the chelating resin. The ion-exchange behaviour of the resin for specific metal ions, viz. Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Pb²⁺, was evaluated by a batch equilibrium method. The study was extended to three variations: evaluation of metal ion uptake in the presence of different electrolytes at different concentrations; evaluation of metal ion uptake at different pH; and evaluation of metal ion uptake at different times. Further, the reusability of the resin was also determined to assess the efficiency of the resin after a few cycles of sorption. From the results it was observed that the resin acts as an effective chelating ion-exchanger.     

Solid phase extraction studies on cellulose based chelating resin for separation,pre-concentration and estimation of Cu2+and Ni2+

Chelating resins based on biopolymers, specifically cellulose, offers a green analytical method for determination of metal ions at trace levels present in various samples. It offers a fast, accurate and simple method for separation and pre-concentration of metal ions at low concentrations, prior to their determination by instrumental method. Cellulose based chelating resin (CELL-GLY) has been synthesised by immobilising glycine on it. CELL-GLY was used for the determination of trace amounts of Cu²⁺ and Ni²⁺ from aqueous solutions before their determination by FAAS. The preparation of CELL-GLY involves simple steps, based on natural and easily available biopolymer cellulose, which makes its use as chelating resin is a green method. The Cu²⁺ and Ni²⁺ can be quantitatively recovered from the CELL-GLY in the pH range 4.8–6.9 and 6.9-7.8 respectively with a recovery of more than 95% for each of these metal ions. Recovery of these metal ions using CELL-GLY was quantitative up to 35 °C. The detection limits for copper and nickel by FAAS were 1.20 ppb and 1.40 ppb, respectively. The method was successfully employed for the determination of trace amounts of Cu²⁺ and Ni²⁺ in various samples.