Triton X-100辅助合成多级孔道结构ZSM-5沸石催化剂(英文)

ZSM-5 zeolite with a hexagonal cubic morphology was synthesized by a hydrothermal method using Triton X-100, a nonionic surfactant. The samples prepared with and without the surfactant were characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy, N2 adsorption, high resolution transmission electron microscopy(TEM), high resolution scanning electron mi-croscopy, energy dispersive X-ray analysis, and NH3 temperature-programmed desorption. The XRD patterns confirmed the formation of a pure ZSM-5 crystalline phase without secondary phases. TEM images revealed that the hexagonal cubes were made of peanut-shaped nanoparticles with voids.The catalytic activity of the zeolite samples was evaluated using the selective oxidation of benzyl alcohol with tertiary-butyl hydrogen peroxide as the oxidant at 90 °C. The surfactant-assisted prep-aration yielded a zeolite that gave a higher conversion than the one prepared in the absence of the surfactant. The catalyst was retrieved and reused four times without significant loss in activity and selectivity.     

Triton X-100辅助合成多级孔道结构ZSM-5沸石催化剂(英文)

ZSM-5 zeolite with a hexagonal cubic morphology was synthesized by a hydrothermal method using Triton X-100, a nonionic surfactant. The samples prepared with and without the surfactant were characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy, N2 adsorption, high resolution transmission electron microscopy(TEM), high resolution scanning electron mi-croscopy, energy dispersive X-ray analysis, and NH3 temperature-programmed desorption. The XRD patterns confirmed the formation of a pure ZSM-5 crystalline phase without secondary phases. TEM images revealed that the hexagonal cubes were made of peanut-shaped nanoparticles with voids.The catalytic activity of the zeolite samples was evaluated using the selective oxidation of benzyl alcohol with tertiary-butyl hydrogen peroxide as the oxidant at 90 °C. The surfactant-assisted prep-aration yielded a zeolite that gave a higher conversion than the one prepared in the absence of the surfactant. The catalyst was retrieved and reused four times without significant loss in activity and selectivity.     

Synthesis and Characterization of ZSM-5/β Co-Crystalline Zeolite

ZSM-5/β co-crystalline zeolites with different content of ZSM-5 have been synthesized by adding different amount of ZSM-5 to the synthetic system ofβ zeolite with NaAlO2, silica sol as the source of aluminum and silica, respectively, and TEA as the template under controlled condition of the synthesis. The ZSM-5/β co-crystalline zeolite was studied by XRD, SEM, BET and NH3-TPD. The reaction activity of toluene alkylation was investigated with a mixture of toluene-methanol as the feedstock in a pulse micro-reactor over the ZSM-5/β co-crystalline zeolite. It is found that ZSM-5/β co-crystalline zeolite has two kinds of zeolite structure including ZSM-5 and β zeolite, not in the form of a physical mixture. The pore structure of ZSM-5/β co-crystalline zeolites is different from that forβ zeolite, ZSM-5and their physical mixture. In addition, the peaks of both high and low temperature desorption of ammonia over the ZSM-5/β co-crystalline zeolite shift 23 ℃ to lower temperatures and the acid amount of its strong acid is 3% more than the physical mixture. So the ZSM-5/β co-crystalline zeolite produces the highest content of xylene, which is 10.4% higher than the physical mixture. And the ZSM-5/β co-crystalline zeolite has better selectivity for toluene alkylation and weaker de-methylation than β zeolite, ZSM-5 and their physical mixture.     

Preparation and Gas Sensing Performance of Hierarchical Porous ZnO-based Materials with Sunflower Rods as a Biological Template

A graded porous structure SnO2/ZnO composite was prepared with sunflower rods as a biological template. The prepared samples were subjected to phase analysis by scanning electron microscopy(SEM), transmission electron microscopy(TEM), X-ray diffractiometry(XRD) and X-ray photoelectron spectroscopy(XPS).ZnO sample was a pure phase of hexagonal wurtzite, and the template had been completely removed. The surface of the sample presented a honeycomb-like structure of a sunflower rod template, which was formed by interconnecting the porous channels, and had a smaller average size and exhibited n-n heterojunction at tlie n-type ZnO interface. Compared with that of pure ZnO, the response of the hierarchical porous structure SnO2/ZnO composite to 100 mg/L w-butanol reached a maximiuTi of 40.61 at 240℃, about 2.7 times higher than that of pure ZnO. Its response time and recovery time are 6 and 3 s, respectively, which are also better than those of pure ZnO. SnO2/ZnO composite exhibits good gas selectivity, which is related to the improvement of the structure and the forming of n-n heterojunctions of the material.     

Synthesis and Characterization of ZSM-5/β Co-Crystalline Zeolite

ZSM-5/β co-crystalline zeolites with different content of ZSM-5 have been synthesized by adding different amount of ZSM-5 to the synthetic system of β zeolite with NaAlO2, silica sol as the source of aluminum and silica, respectively, and TEA as the template under controlled condition of the synthesis. The ZSM-5/β co-crystalline zeolite was studied by XRD, SEM, BET and NH3-TPD. The reaction activity of toluene alkylation was investigated with a mixture of toluene-methanol as the feedstock in a pulse micro-reactor over the ZSM-5/β co-crystalline zeolite. It is found that ZSM-5/β co-crystalline zeolite has two kinds of zeolite structure including ZSM-5 and β zeolite, not in the form of a physical mixture. The pore structure of ZSM-5/β co-crystalline zeolites is different from that for β zeolite, ZSM-5 and their physical mixture. In addition, the peaks of both high and low temperature desorption of ammonia over the ZSM-5/β co-crystalline zeolite shift 23 ℃ to lower temperatures and the acid amount of its strong acid is 3% more than the physical mixture. So the ZSM-5/β co-crystalline zeolite produces the highest content of xylene, which is 10.4% higher than the physical mixture. And the ZSM-5/β co-crystalline zeolite has better selectivity for toluene alkylation and weaker de-methylation than β zeolite, ZSM-5 and their physical mixture.     

以TiCl4为钛源合成钛硅分子筛

Since titanium silicalite-1 (TS-1) was first prepared by Taramasso et al[1] in 1983,the synthesis of TS-1 and its application in partial oxidation have become a hotspot in the zeolite catalytic field.For the traditional synthesis route of TS-1,the key problem is its costly price and severe synthesis conditions,which hamper its industrial application.To avoid using costly alkali-free tetrapropylammonium hydroxide (TPAOH) as a template,Müller et al[2] reported that TS-1 could be synthesized using tetrapropylammonium bromide (TPABr) as a template with ammonia as the base to adjust the basicity of the gel.     

A New Method for the Synthesis of Selenium Nanoparticles and the Application to Construction of H202 Biosensor

The well-distributed, stable selenium nanoparticles (10 nm) with good adhesive abilityand biocompatibility were successfully synthesized by using the template of chitosan cross-linkedwith glutaradehyde. The resulting selenium nanoparticles were used as a new carrier forhorseradish peroxidase to construct H2O2 biosensors with good performances.     

Preparation of Zeolite X Membranes on Porous Ceramic Substrates with Zeolite Seeds

Zeolite X membranes were investigated by in-situ hydrothermal synthesis on porous ceramic tubes precoated with zeolite X seeds or precursor amorphous aluminosilicate, and porous α-Al2O3 ceramic tubes with a pore size of 50 200 nm were employed as supports. Zeolite X crystals were synthesized by the classic method and mixed into deionized water as a slurry with a concentration of 0.2 0.5wt%, having a range of crystal sizes from 0.2 to 2μm. Crystal seeds were pressed into the pores near the inner surface of the ceramic tubes, and crystallization took place at 95℃ for 24-96 h. It was also investigated that Boehmite sol added with zeolite X seeds was precoated on ceramic supports to form a layer of γ-Al2O3 by heating, and hydrothermal crystallization could then take place to prepare the zeolite membranes on the composite ceramic tubes. The crystal species were characterized by XRD, and the morphology of the supports subjected to crystallization was characterized by SEM. The composite zeolite membranes have zeolitic top-layers with a thickness of 10-25 μm, and zeolite crystals can be intruded into pores of the supports as deeply as 100μm. The experimental results indicate that the precoating of zeolitic seeds on supports is beneficial to crystallization by shortening the synthesis time and improving the membrane strength. The resulting zeolite X membrane shows permselectivity to tri-n-butylamine((C4H9)3N) over perfluro-tributyl-amine ((C4Fg)3N), and a permeance ratio of 57 for ((C4Hg)3N to (C4F9)3N could be reached at 350℃. Permeances of BZ, EB and TIPB through the zeolite membrane were also measured and were found to slightly increase with temperature.     

Chiral separation by （S）-naproxen imprinted monolithic column with mixed functional monomers

Molecularly imprinted polymers (MIPs), using (S)-naproxen as template and the combination of butyl methacrylate (BMA) and MAA (1:1 molar ratio) as functional monomers were synthesized by an in situ polymerization reaction. The rendered monolithic column was evaluated in HPLC mode. The result showed that the monolithic MIPs with the combination of two monomers produced better chiral resolution of rac-naproxen (Rs=1.55) and column efficiencies of imprinted molecules (N=2860 plates/m)than that with pure MAA.     

Preparation and characterization of a novel strong-fluorescent hydrotalcite-like compound (Al-HTLc)

A novel strong-fluorescent hydrotalcite-like compound (Al-HTLc) was synthesized by coprecipitation. In the sample, the content of aluminum(III) in the layers was decreased to a proper value. The Al3 ions coordinated with 8-hydroxyquinolines (8-HQ) which were dispersed into the anions in the interlayer region. The sample was characterized by XRD, XPS, FT-IR, TG-DSC, UV-Vis, and fluorescence spec- troscopy; its composition and structure were also determined. The results indicate that the sample can emit fluorescence (487 nm) with a strong fluorescence intensity (4.9×105 (a.u.)). The fluorescent lifetime and fluorescence quantum yield of Al-HTLc were measured to be 21.24 ns and 67%, respectively, higher than those of pure 8-hydroxyquinoline aluminum (Alq3). The result of TG-DSC measurement clearly shows the enhanced thermal stability of Al-HTLc compared with that of MgAl-LDH and pure Alq3. Al-HTLc may be used as a novel luminescent functional material.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.