Effect of Sb-doping on the morphology and the dielectric properties of chrysanthemum-like ZnO nanowire clusters

Chrysanthemum-like ZnO nanowire clusters with different Sb-doping concentrations were prepared by using the hydrothermal process. The microstructures, morphologies, and dielectric properties of the as-prepared products were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), field emission environment scanning electron microscope (FEESEM), and microwave vector network analyzer respectively. The results indicate that the as-prepared products are Sb-doped ZnO single crystallines with hexagonal wurtzite structure, the flower bud saturation degree F_d is obviously different from that of the pure ZnO nanowire clusters, the good dielectric loss property is found in Sb-doped ZnO products with low density, and the dielectric loss tangent tanδ _e increases with the increase of the Sb-doping concentration in a certain concentration range.     

Effect of Mn-doping on the growth mechanism and electromagnetic properties of chrysanthemum-like ZnO nanowire clusters

Chrysanthemum-like ZnO nanowire clusters with different Mn-doping concentrations are prepared by a hydrothermal process. The microstructure, morphology and electromagnetic properties are characterized by x-ray diffractometer high-resolution transmission electron microscopy (HRTEM), a field emission environment scanning electron microscope (FEESEM) and a microwave vector network analyser respectively. The experimental results indicate that the as-prepared products are Mn-doped ZnO single crystalline with a hexagonal wurtzite structure, that the growth habit changes due to Mn-doping and that a good magnetic loss property is found in the Mn-doped ZnO products, and the average magnetic loss tangent tanδ_m is up to 0.170099 for 3% Mn-doping, while the dielectric loss tangent tanδ_e is weakened, owing to the fact that ions Mn^{2 +} enter the crystal lattice of ZnO.     

Effect of polyacrylamide on morphology and electromagnetic properties of chrysanthemum-like ZnO particles

Through hydrothermal process, the chrysanthemum-like ZnO particles are prepared with zinc acetate dihydrate (Zn(CH₃COO)₂\cdot 2H₂O) and sodium hydroxide (NaOH) used as main resources under the different concentrations of surfactant polyacrylamide (PAM). The microstructure, morphology and the electromagnetic properties of the as-prepared products are characterized by high-resolution transmission electron microscopy (HRTEM), field emission environment scanning electron microscope (FEESEM) and microwave vector network analyzer, respectively. The experimental results indicate that the as-prepared products are ZnO single crystalline with hexagona wurtzite structure, that the values of slenderness ratio L_d are different in different PAM concentrations, and that the good magnetic loss property is found in the ZnO products, and the average magnetic loss tangent tanδ_u increases with PAM concentration increasing, while the dielectric loss tangent tanδ _e decreases.     

Effect of different annealing temperature on Sb-doped ZnO thin films prepared by pulsed laser deposition on sapphire substrates

Influence of annealing temperature on the properties of Sb-doped ZnO thin films were studied. Hall measurement results indicated that the Sb-doped ZnO annealed at 950 °C was p-type conductivity. X-ray diffraction (XRD) results indicated that the Sb-doped ZnO thin films prepared at the experiments are high c-axis oriented. It was worth noting that p-type sample had the worst crystallinity. The measurements of low-temperature photoluminescence (PL) spectra indicate that the sample annealed at the temperatures of 950 °C showed strong acceptor-bound exciton (A⁰X) emission, and confirmed that it is related to Sb-doping by comparing with the undoped ZnO low-temperature PL spectrum.     

ZnO薄膜的性质对水热生长ZnO纳米线阵列的影响

用水热法在ZnO薄膜上制备了直径、密度及取向可控的ZnO纳米线阵列。ZnO薄膜是通过原子层沉积(ALD)方法制备并在不同温度下退火处理得到的,退火温度对ZnO薄膜的晶粒尺寸、结晶质量和缺陷性质有很大的影响。而ZnO薄膜的性质对随后生长的ZnO纳米线的直径、密度及取向能起到调节控制的作用。通过扫描电子显微镜(SEM)、X射线衍射(XRD)仪和光致发光(PL)测试对ZnO薄膜和ZnO纳米线进行了表征。最后得到的垂直取向的ZnO纳米线阵列适合在发光二极管和太阳能电池等领域使用。     

ZnO nanorod arrays with tunable size and field emission properties on an ITO substrate achieved by an electrodeposition method

In the present work,vertically aligned ZnO nanorod arrays with tunable size are successfully synthesized on nonseeded ITO glass substrates by a simple electrodeposition method.The effect of growth conditions on the phase,morphology,and orientation of the products are studied in detail by X-ray diffraction(XRD),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).It is observed that the as-prepared nanostructures exhibit a preferred orientation along c axis,and the size and density of the ZnO nanorod can be controlled by changing the concentration of ZnCl2.Field emission properties of the as-synthesized samples with different diameters are also studied,and the results show that the nanorod arrays with a smaller diameter and appropriate rod density exhibit better emission properties.The ZnO nanorod arrays show a potential application in field emitters.     

一维纳米氧化锌自驱动紫外探测器的构建与性能研究

本文通过化学气相沉积法制备了ZnO纳米材料, 利用扫描电镜、光致发光谱、X衍射光谱及拉曼光谱等方法对制备的材料进行了表征. 基于制备的单根ZnO线分别构建了三种不同结构的紫外探测器件: Ag-ZnO-Ag肖特基型、PEDOT:PSS/n-ZnO结型和p-Si/n-ZnO结型紫外探测器, 并对器件的性能进行了研究. 结果表明: 三种不同结构的器件都表现出良好的整流特性, 对紫外线均有明显的光响应; 在零偏压下, 都有明显的自驱动特性. 三种器件中, p-Si/n-ZnO型紫外探测器性能最为优异: 在零偏压下, 暗电流约在1.2×10^-3 nA, 光电流在5.4 nA左右, 光暗电流比为4.5×10³, 上升和下降时间分别为0.7 s和1 s. 通过三类器件性能比较, 表明无机p-Si更适合与ZnO构建pn结型自驱动紫外探测器.     

亚波长尺度下混合等离子泄漏模式激光

由于光存在衍射极限,因此传统方法不能实现亚波长尺度下的激光激射.为了打破这一衍射极限,本文设计了金属-介电层-半导体堆叠结构来实现深亚波长尺度下的激光激射,并讨论了相关结构对模式传播的影响.结构设计上,采用低介电常数金属银作为衬底、10?nm厚的LiF作为介电层、具有六边形截面的半导体纳米线ZnO作为高介电常数层,采用...     

低温CVD法在玻璃衬底上制备ZnO纳米线阵列

采用化学气相沉积(CVD)法在镀Cr(20nm)的玻璃衬底上,低温制备了ZnO纳米线阵列。利用扫描电子显微镜(SEM)和X射线衍射(XRD)对样品的表面形貌和微结构进行了分析表征。结果表明:源分解温度1350℃,衬底温度450～500℃,氩气流量为35sccm时,ZnO纳米线在玻璃衬底上呈现有序生长;XRD谱图中只观测到ZnO(002)衍射峰。表明制备的纳米线阵列具有高度c轴择优取向生长特性和较高的结晶质量。     

Characterization, sintering and dielectric properties of nanocrystalline zinc oxide prepared by a citric acid-based combustion route

Nanosized zinc oxide has been synthesized through a novel single step solution combustion route using citric acid as fuel. The X-ray diffraction (XRD) analysis revealed that the synthesized ZnO nanopowder has the pure wurtzite structure. The phase purity of the nanopowder has been confirmed using differential thermal analysis (DTA), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The morphology and crystalline size of the as-prepared nanopowder characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that the powder consisted of a mixture of nanoparticles and nanorods. The nanocrystalline ZnO could be sintered to ∼97% of the theoretical density at 1200 °C in 4 h. The dielectric constant (ε_r) and dielectric loss (ε_i) of sintered ZnO pellets at 5 MHz were 1.38 and 9×10⁻², respectively, at room temperature.     

聚苯胺/ZnO纳米线薄膜材料作为发光层的柔性光电器件 及其发光机理

综合氧化锌纳米线(ZnO NWs)的光学活性与聚苯胺(PANI)的空穴传输特性,设计并制备了一种聚合物/ZnO纳米线电致发光材料,并对其发光特性进行了研究。通过高分子络合软模板法,将有序的单晶ZnO NWs均匀生长在覆有铟锡氧化物(ITO)涂层的柔性聚乙烯对苯二甲酸乙二醇酯(PET)衬底上并嵌入PANI薄膜,获得了电致发光薄膜材料和有机/无机异质结实验器件ITO/(ZnO NWs-PANI)。有机/无机异质结器件电致发光可调,在相对低的开启电压下呈现室温蓝紫外发光,并且ZnO NWs表面覆盖PANI增加了蓝紫外发光的强度和稳定性;而无PANI的ZnO NWs阵列具有450 nm处的缺陷发射峰,这可能是电子从扩展态锌间隙Zn_i到价带的跃迁引起的。这些结果表明,基于PANI/ZnO纳米线的复合材料在柔性光电器件方面的应用极具潜力。     

树形结构Si/ZnO纳米线阵列的制备及光学性能

用一种低成本的方法制备出了树形结构Si/ZnO纳米线阵列。首先在室温条件下用金属辅助化学腐蚀法在Si(100)衬底上制备了Si纳米线阵列,Si纳米线的直径尺寸及分布都很均匀,通过改变腐蚀时间,能够得到高度不同的Si纳米线阵列。利用磁控溅射在Si纳米线表面制备一层ZnO薄膜,然后利用水热法在Si纳米线阵列上生长了ZnO纳米线。通过扫描电子显微镜(SEM)、能谱分析仪(EDS)和光致发光(PL)测试对样品进行了表征。通过这种方法制备的Si/ZnO复合结构在太阳能电池、光催化等领域有潜在应用价值。     

Synthesis and piezoelectric properties of?well-aligned ZnO?nanowire arrays via a?simple solution-phase approach

An effective, low cost and catalyst-free solution-phase approach was demonstrated for achieving a tailored length and controlled surface-to-volume ratio of aligned ZnO nanowire (NW) arrays. By a slight variation of the solution concentration and growth time, significant changes in length and surface-to-volume ratio of the obtained ZnO NW arrays have been controlled, respectively. The morphology and microstructure of the synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Also the growth mechanism was discussed. For the study of the piezoelectric property of aligned ZnO NW arrays, some measuring models of nanogenerators (NGs) were fabricated with two pieces of grown ZnO NW array structures stacking together and penetrating into each other. One of the pieces was coated with Au film as the conductive nanotip (NTP) array. The NG was driven by an ultrasonic wave. The piezoelectric output current was gained and characteristic curves have been illustrated for different measuring results. The curves show that increasing the length and surface-to-volume ratios of ZnO NW arrays can enhance the output power of the NGs, respectively. It can be seen that the NGs fabricated with size-controlled ZnO NW arrays provide a feasible technology for building high-power output or power-controlled NGs for applications where a smaller size or appointed power output NGs are required. However, no relationship was found between the piezoelectric current output and the driving frequency of ultrasonic waves from 10 to 50 kHz.     

Fabrication and characterization of ZnO micro and nanostructures prepared by thermal evaporation

A simple method of thermal evaporation to fabricate micro and nanostructures of zinc oxide was presented. ZnO micro and nanostructures, prepared under different quantity of O₂, were characterized by techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy and analytical transmission electron Microscope. The SEM images indicated that the products prepared under the condition of sufficient O₂ were needle-like microrods and the samples synthesized under the condition of deficient O₂ were nanorods and nanowires with very high aspect ratio. The results of XRD and Raman shifts revealed that the ZnO micro and nanostructures synthesized under different quantity of O₂ were both single crystalline with the hexagonal wurtzite structure. The HRTEM images indicated that the ZnO nanowire prepared under the condition of deficient O₂ was single crystalline and grown along the direction of [0 0 1]. Photoluminescence measurement was carried out and it showed that the spectra of ZnO micro and nanostructures prepared under different quantity of O₂ exhibited similar emission features. In addition, the growth mechanism of ZnO micro and nanostructures was preliminarily discussed.     

银修饰的ZnO纳米线的发光和光响应性质

采用不同浓度的银溶液对水热方法生长的ZnO纳米线进行了银修饰,并对其形貌、光致发光和光响应特性进行了研究.实验结果表明,随着修饰用银浓度的加大,光致发光的强度减弱.对原生的和用浓度为10mmol/L的银修饰的ZnO纳米线的光响应进行了测试和比较,发现银修饰的ZnO纳米线在380 nm的响应度达4.6 mA/W,其值是未...     

Influence of Al doping on microstructure,morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere

Zinc oxide (ZnO) and aluminium (Al) doped zinc oxide (AZO) thin films have been fabricated by spray pyrolysis technique in normal atmospheric condition. Samples of different Al-concentrations (0–5% Al) were deposited at 350 °C onto glass substrate to study the structural, morphological, optical and photoluminescence properties. X-ray diffraction study confirms that the films are polycrystalline having hexagonal structure. SEM images show that the films have rope and tube like morphology. Optical properties, such as transmittance, optical band gap, extinction coefficient, refractive index, optical conductivity, dielectric constants and electron energy loss functions were analyzed and discussed. Results show that the optical parameters have been changed significantly with Al-doping concentration. The photoluminescence spectra indicate that the PL peaks originated from deep level emissions (DLE) with different intensities for ZnO and Al-doped ZnO films.     

Recombination parameters in low-resistivity gamma-irradiated η-type germanium

Studies of recombination in ～0.2 Ω-cm As- and Sb-doped Co⁶⁰ γ-irradiated Ge which yield energy levels and the temperature dependence of the electron and hole capture probabilities are reported. For Sb-doped material at 323°K, the recombination center energy level position (neglecting statistical weight) was found to be 0.361±0.005 eV above the valence band with a possible slight temperature dependence corresponding roughly to one-half the variation of band gap with temperature. The capture probability ratio at this same temperature was 740. For the Asdoped case, two different levels appear to dominate the recombination process in annealed and unannealed low resistivity material. The energy level positions relative to the valence band (neglecting statistical weight) are 0.327±0.005 eV and 0.37±0.01 eV at room temperature for the annealed and unannealed samples, respectively. The corresponding capture probability ratios are 650 and 810. As in the case of Sb-doping, the energy level appears to shift with temperature at about one-half the rate of the shift in band gap energy.     

Electronic Structure and Optical Properties of Antimony-Doped SnO_2 from First-Principle Study

A first-principles study has been performed to calculate the electronic and optical properties of the SbxSn1xO system.The simulations are based upon the method of generalized gradient approximations with the Perdew-Burke-Ernzerhof form in the framework of density functional theory.The supercell structure shows a trend from expanding to shrinking with the increasing Sb concentration.The increasing Sb concentration induces the band gap narrowing.Optical transition has shifted to the low energy range with increasing Sb concentration.Other important optical constants such as the dielectric function,reflectivity,refractive index,and electron energy loss function for Sb-doped SnO2 are discussed.The optical absorption edge of SnO2 doped with Sb also shows a redshift.     

Growth and characterization of type-II ZnO/ZnTe core-shell nanowire arrays for solar cell applications

Large area, well-aligned type-II ZnO/ZnTe core-shell nanowire arrays have been fabricated on an a-plane sapphire substrate. The ZnO nanowires were grown in a furnace by chemical vapor deposition with gold as catalyst and then were coated with a ZnTe shell on the ZnO nanowires surface by a metal-organic chemical deposition chamber. The morphology and size distribution of the ZnO/ZnTe core-shell nanowire arrays were studied by scanning electron microscopy (SEM) and the crystal structure was examined by x-ray diffraction (XRD). Transmission measurement was used to study the optical properties of the core-shell nanowires. The results indicated that the ZnO/ZnTe core-shell nanowire arrays have good crystalline quality. In addition, it was found that the nanowire arrays have good light absorption characteristics and these properties make it suitable for making photovoltaic devices.     

Investigation of the fill factor of dye-sensitized solar cell based on ZnO nanowire arrays

The fill factor of dye-sensitized solar cells based on the ZnO nanowire array is very low, which is usually ascribed to a rapid charge recombination. In this article, the influence on the fill factor of ZnO nanowire array cell is investigated and discussed by comparing dark current and decay rate of open circuit potential of the ZnO nanowire array cell with those of the ZnO nanoparticle cell, TiO₂ nanoparticle cell and TiO₂-coated ZnO nanowire array cell. The results demonstrate that the low fill factor of the ZnO nanowire array cell is largely caused by a rapid decrease of electron injection efficiency rather than a rapid charge recombination, which is decided by the absorption nature of Ru-complexed dye molecules on ZnO surface and repellency of radial electric field. The fill factor of the ZnO nanowire array cell can be improved by coating ZnO nanowires with a wide band gap semiconductor material or metal oxide insulator.