金电极析氢反应过程中吸附氢原子的表面扩散及复合反应动力学研究

用特别设计的以平面金电极为工作电极,以Nafion膜为固体电解质的实验装置,对金电极析氢反应过程中吸附氢原子的表面扩散及吸附氢原子复合为氢分子的反应进行了定量研究,发现吸附氢原子在金表面上的扩散及复合反应引起了电流增加.对这一随时间变化的电流增加数据进行计算机模拟和数值拟合,得到金电极析氢反应中吸附氢原子的表面扩散系数、复合反应常数及其它动力学参数,并对数据进行了讨论.     

NickelII-catalyzed asymmetric photoenolization/Mannich reaction of (2-alkylphenyl) ketones

A diastereo- and enantioselective photoenolization/Mannich (PEM) reaction of ortho-alkyl aromatic ketones with benzosulfonimides was established by utilizing a chiral N,N′-dioxide/Ni(OTf)₂ complex as the Lewis acid catalyst. It afforded a series of benzosulfonamides and the corresponding ring-closure products, and a reversal of diastereoselectivity was observed through epimerization of the benzosulfonamide products under continuous irradiation. On the basis of the control experiments, the role of the additive LiNTf₂ in achieving high stereoselectivity was elucidated. This PEM reaction was proposed to undergo a direct nucleophilic addition mechanism rather than a hetero-Diels–Alder/ring-opening sequence. A possible transition state model with a photoenolization process was proposed to explain the origin of the high level of stereoinduction.

A diastereo- and enantioselective photoenolization/Mannich (PEM) reaction of (2-alkylphenyl) ketones with benzosulfonimides is realized by a chiral N,N′-dioxide/Ni^II complex catalyst.     

PEMFC膜电极组件(MEA)制备方法的评述

膜电极组件(MEA)是质子交换膜燃料电池的核心部件.本文在简述MEA结构的基础上,根据MEA制备过程中催化层支撑体不同,将目前已有的多种MEA制备方法分为两类制备模式:以GDL为支撑体和以PEM为支撑体的制备模式.文中对这些制备方法的特点进行了详细评述,对MEA制备方法的发展趋势进行了展望,认为以PEM为支撑体的制备模式是今后MEA制备的主要发展方向.     

Electrochemical Properties of Poly (ethyl acrylate-co-lithium methacrylate) Latex Film Solid Electrolyte

Muchattentionhasbeenpaidtothedevelopmentofnewpolymerelectrolytewithspecialmorphology,soastoimprovetheirelectrochemicalpropertiestomeettheneedsoflithium(ion)battery.Inthiswork,PEMlatexwassynthesizedbyemulsion-fi-eepolymerization.ThemicrophotoofPEMlate...     

Modulation of the functions of osteoblast-like cells on poly(allylamine hydrochloride) and poly(acrylic acid) multilayer films

Deposition of layer-by-layer polyelectrolyte multilayer (PEM) films has been a widely applied surface modification technique to improve the biocompatibility of biomaterials. The objective of this study was to investigate the impact of the deposition of poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) multilayer films on adhesion, growth and differentiation of osteoblasts-like MG63 cells. PAH and PAA were deposited sequentially onto tissue culture polystyrene at either pH 2.0 or pH 6.5 with 4-21 layers. While the MG63 cells attached poorly on the PAH/PAA multilayer films deposited at pH 2.0, while the cells adhered to the PEM films deposited at pH 6.5, depending on layer numbers. Cell adhesion, proliferation and osteogenic activities (alkaline phosphatase activity, expression of osteogenic marker genes and mineralization) were highest on the 4-layer PAH/PAA film and decreased with increasing layer numbers. On the other hand, the behavior of MG63 cells did not show any difference on the adjacent even and odd layers, except PEM4 and PEM5, i.e. the surface charges of the PAH/PAA multilayer films with over ten layers seem indifferent to osteoblastic functions. The results in this study suggested that the mechanical properties of PEM films may play a critical role in modulating the behavior of osteoblasts, providing guidance for application of PEM films to osteopaedic implants.     

二(2,6-二叔丁基-4-个甲基苯氧基)钐催化丙交酯开环聚合

聚丙交酯（PLA）可以生物降解，产物无毒，可用于外科手术的缝合线、人造器官以及药物缓释等方面，因此引起了人们的广泛注意．丙交酯的开环聚合是合成聚丙交酯的一种方便方法，所用的催化剂主要是主族及副族金属的配合物，如双金属氧桥配合物［‘j，烷基金属有机化合物［‘j，异丙氧基铝［’‘以及叶琳铝「“等．最近，关于三价烷氧基稀土化合物作为单组份催化剂催化丙交酯开环聚会已有报道［’·’‘．我们发现两价芳氧基稀土化合物（ArO）。Sin（THF）。（ArO一2，已二叔丁基一个甲基苯氧基）也可以有效地催化丙文酯的开环聚合．本…     

Effects of catalyst introduction methods using PAMAM dendrimers on selective electroless nickel deposition on polyelectrolyte multilayers

We studied the effects of catalyst introduction methods using poly(amidoamine) (PAMAM) dendrimers on the nickel patterning of polyelectrolyte multilayer (PEM)-coated substrates. Three different approaches to palladium catalyst introduction using microcontact printing as the patterning technique were utilized and compared. The catalyst introduction methods are (1) direct catalyst stamping, (2) directed assembly using PAMAM dendrimer stamping, and (3) catalyst encapsulation and reduction to nanoparticles within PAMAM dendrimers before stamping. After patterning, the sample surfaces were placed in an electroless bath where nickel was selectively plated onto the patterns. The patterned surfaces were characterized using optical microscopy, atomic force microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The metal plating rates on different homogeneous surfaces that simulate the patterned surfaces were measured using a quartz crystal microbalance. In addition, the effect of PEM film thickness (i.e., number of bilayers) on the selectivity of nickel patterning was investigated.     

Nanosized IrOx–Ir Catalyst with Relevant Activity for Anodes of Proton Exchange Membrane Electrolysis Produced by a Cost‐Effective Procedure

We have developed a highly active nanostructured iridium catalyst for anodes of proton exchange membrane (PEM) electrolysis. Clusters of nanosized crystallites are obtained by reducing surfactant‐stabilized IrCl₃ in water‐free conditions. The catalyst shows a five‐fold higher activity towards oxygen evolution reaction (OER) than commercial Ir‐black. The improved kinetics of the catalyst are reflected in the high performance of the PEM electrolyzer (1 mg_Ir cm^?2), showing an unparalleled low overpotential and negligible degradation. Our results demonstrate that this enhancement cannot be only attributed to increased surface area, but rather to the ligand effect and low coordinate sites resulting in a high turnover frequency (TOF). The catalyst developed herein sets a benchmark and a strategy for the development of ultra‐low loading catalyst layers for PEM electrolysis.     

Anti-flooding cathode catalyst layer for high performance PEM fuel cell

Water management in cathode catalyst layer (CCL) plays an important role in the PEM fuel cell operation. A novel anti-flooding CCL is developed with the addition of oxygen permeable and hydrophobic dimethyl silicone oil (DSO) into the catalyst layer (CL) to improve the water balance and oxygen transport within the cathode. With the addition of 0.5 mg cm^?2 DSO in the CCL, the ability of water management has been enhanced greatly compared to that with a normal cathode. Electrochemical impedance spectroscopy has been employed to characterize the electrochemical behavior of the single fuel cell. The results show that the increased hydrophobicity of the CCL by DSO modification effectively expels water out of the voids of CCL. In addition, DSO in the CCL enhances oxygen accessibility to the CCL, thus improving the performance of the PEM fuel cell significantly.     

Synthesis of conductive rutile-phased Nb0.06Ti0.94O2 and its supported Pt electrocatalysts (Pt/Nb0.06Ti0.94O2) for the oxygen reduction reaction

In this paper, Nb-doped TiO(2) with anatase and rutile phases was synthesized by the acid-catalyzed sol-gel method, and used as catalyst supports for the oxygen reduction reaction (ORR). X-ray diffraction (XRD), transmission electron microscopy (TEM), Energy dispersive X-ray spectroscopy (EDX), and Brunauer-Emmett-Teller (BET) were used to characterize the support materials in terms of material structures, morphology, composition, and surface area. XRD analysis showed that both the high concentration of hydrochloric acid present in the synthesis and the presence of Pt in the support could favor the formation of conductive rutile phased TiO(2), resulting in the improvement of electronic conduction of the Nb-doped TiO(2) support, which was confirmed by measured conductivities. For electrochemical characterization and ORR catalyst activity validation, Pt particles were deposited on the supports synthesized in this paper to form several catalysts, which were tested for electrochemical Pt surface area, ORR mass activity and specific activity. A monotonic increase in Pt ORR mass activity with increasing catalyst support's conductivity suggested that the support conductivity plays an important role in enhancing catalyst mass activity. The results showed that these non-carbon supported catalysts are promising as PEM fuel cell cathode catalysts.     

Effects of polymer electrolyte membrane's property on fuel cell performances

Platinum and/or metal‐oxide nanocrystals (d = 1 ‐ 2 nm) were highly dispersed in membranes such as a Nation® commercially available (denoted as Pt‐PEM or Pt‐oxide‐PEM) attempting to self‐humidify the PEMs and/or to suppress the short‐circuit reaction by a catalytic oxidation of the crossover hydrogen or methanol with oxygen on the Pt catalyst. High and stable performances under the suppressed crossover and lowered internal resistance are demonstrated at the H₂/O₂ fuel cells applied Pt‐PEM or Pt‐oxide‐PEM without any external humidification. An appreciable increase of the cathode potential due to the reduced methanol crossover was clearly demonstrated at a direct methanol fuel cell (DMFC) with Pt‐PEM. It also becomes clear that the development of new PEMs with lowered permeability against methanol is essential for DMFCs.     

Catalytic reduction of U(VI) to U(IV) using hydrogen with platinum loaded on alumina and silica

During the reprocessing of spent nuclear fuel, uranium (U) and plutonium (Pu) are together extracted by employing tri-n-butyl phosphate (TBP)/dodecane mixture and their partitioning is achieved by adding uranous nitrate. The partitioning agent, uranous is conventionally produced by the electrolytic reduction of uranyl nitrate. An alternate route for the reduction of U from (VI) to (IV) using hydrogen (H₂) as reductant was developed using platinum (Pt) based catalyst. Improvements in the development of the catalyst have been carried out in order to reduce the requirement of Pt without affecting the reduction performance. Experiments using 2 wt% Pt loaded on alumina beads and alumina powder have been performed and results are discussed. As the catalyst supported on alumina was found to be unstable in acidic environment, Pt loaded on silica powder has also been developed. Pt loaded on alumina and silica substrates have been tried to envisage the reduction behaviour using H₂ as reductant in presence of hydrazine nitrate which acts as U(IV) stabiliser as well as reductant. Parametric studies have been carried out to optimise the process parameters namely pressure, temperature, U concentration, free acidity, hydrazine concentration and catalyst to U (C/U) ratio. 2 wt% Pt loaded on silica has been selected for further scale up studies for making uranous.     

Synthesis,characterization and catalytic activity of Rh (PPh3)2 (en)Cl complex

Ethylenediamine bis(triphenylphosphine) monochlororhodium has been prepared by the interaction of Wilkinson's catalyst and ethylenediamine in benzene. The complex has been isolated and characterized by conventional and spectroscopic methods. The catalytic activity of the complex was investigated for the hydrogenation of 1-octene as a model reaction at a hydrogen pressure of 1 atmosphere (101 kPa) using methanol as a solvent. The influence of various factors such as catalyst, substrate concentrations and temperature have been studied. The hydrido complex has been identified as an intermediate product by IR and NMR studies. The experimental data are in accordance with a rate expression of the form: .     

采用醋酸钯/邻菲洛林/脂肪胺催化体系制备丙烯酸乙烯酯

以醋酸钯/邻菲洛林/脂肪胺为催化体系,丙烯酸和乙酸乙烯酯为原料,通过乙烯基交换反应制备丙烯酸乙烯酯。用红外光谱和核磁共振对产物的结构进行了分析和表征;用气相色谱研究了反应的产率;考察了不同种类的共催化剂、反应物配比、不同的脂肪胺对该反应体系催化活性和催化剂稳定性的影响。结果表明,加入脂肪胺能有效稳定钯催化剂,提高反应活性,反应产率达到60%以上。     

Development of Poly(Vinyl Alcohol)-Based Polymers as Proton Exchange Membranes and Challenges in Fuel Cell Application: A Review

Abstract

Poly(vinyl alcohol) (PVA) is a biodegradable, water-soluble membrane that has low methanol permeation and reactive chemical functionalities. Modification of these features makes PVA an attractive proton exchange membrane (PEM) alternative to Nafion^TM. However, the pristine PVA membrane is a poorer proton conductor than the Nafion^TM membrane due to the absence of negatively charged ions. Hence, modification of PVA matrixes whilst complying with the requirements of projected applications has been examined extensively. Generally, three modification methods of PVA membranes have been highlighted in previous reports, and these are (1) grafting copolymerization, (2) physical and chemical crosslinking, and (3) blending of polymers. The use of each modification method in different applications is reviewed in this study. Although the three modification methods can improve PVA membranes, the mixed method of modification provides another attractive approach. This review covers recent studies on PVA-based PEM in different fuel cell applications, including (1) proton-exchange membrane fuel cells and (2) direct-methanol fuel cells. The challenges involved in the use of PVA-based PEM are also presented, and several approaches are proposed for further study.     

Tethering of nickel(II) Schiff-base complex onto mesoporous silica: An efficient heterogeneous catalyst for epoxidation of olefins

A new hybrid catalyst has been prepared by tethering a nickel(II) Schiff-base complex via post-synthesis modification of mesoporous silica, MCM-41. The Schiff-base has been derived from salicylaldehyde and 3-aminopropyltriethoxysilane (3-APTES) which is chemically anchored on MCM-41 via silicon alkoxide route. The anchored Schiff-bases imposed a stable planar coordination geometry around the central nickel ions. The catalyst has been characterized by elemental analysis, FT-IR, UV-Vis, small angle X-ray diffraction (SAX) and transmission electron microscopy (TEM) studies. The SAX and TEM measurement showed the mesoporosity of the catalyst. The activity of the catalyst has been assessed in the epoxidation of olefins using tert-butyl-hydroperoxide (tert-BuOOH) as oxidant in heterogeneous condition. Immobilized nickel catalyst was found to be catalytically more active and selective compared to the similar type of nickel(II) complex as well as Ni(NO₃)₂·6H₂O in homogeneous media. The catalyst can be recycled and reused several times without significant loss of activity.     

Current Scenario of Poly (2,5-Benzimidazole) (ABPBI) as Prospective PEM for Application in HT-PEMFC

Abstract

In last two decades, acid doped polybenzimidazole as polymer electrolyte membrane (PEM) has been widely recognized and envisioned as “ideal” proton conducting materials for application in high temperature PEM fuel cell (HT-PEMFC). The majority of research and developmental work is mainly focused on poly (2,2´-m-phenylene-5,5´-bibenzimidazole), However, it is neither easy-processed nor inexpensive component of the respective family. On the other hand, among the various members belonging to benzimidazole family, poly (2,5-benzimidazole) is unique because it possesses a cost-attractive, single-step synthesis process, high extent of doping as well as good chemical and thermal stability. In the recent years this material has proved its potency in the earlier research. Thus this review puts special emphasis on poly (2,5-benzimidazole) and epitomizes the on-going breath-taking progress and achievements on the fabrication of poly (2,5-benzimidazole) based membranes. The write-up describes the effect of blending, cross-linking, ionic liquids and incorporation organic/inorganic nano-fillers. In addition, incorporating other protonic dopants such as heteropoly acids into the chain of poly (2,5-benzimidazole) molecular skeleton is also overviewed. Moreover, the critical interpretation of different causes responsible for earlier degradation and their effect towards the fabrication of high temperature membrane electrode assembly are visualized herein.

• Highlights

• Current developments and existing challenges of ABPBI in PEMFC have been reviewed.

• PEM Modification and addition of protonic dopants has been discussed.

• Proton migration, permeability, stability and reliability are thoroughly illustrated.

• Different ABPBI-based membranes and their performance are comparatively analyzed.

     

Structured polymer electrolyte blends based on sulfonated polyetherketoneketone (SPEKK) and a poly(ether imide) (PEI)

The performance and economics of proton-exchange membrane (PEM) fuel cells are highly dependent on the membranes used to separate the fuel and oxidant. While maintaining reasonable cost, the membrane must feature a number of desirable properties including high proton conductivity. Blends of polymers are one approach to tailoring PEM properties; however, blending to achieve mechanically and chemically robust membranes has generally resulted in reduced conductivity. The objective of this work was to demonstrate the use of field alignment of the proton-conducting domains to increase the conductivity in a polymer blend PEM. A blend of sulfonated poly(etherketoneketone) (SPEKK) and a polyether imide (PEI) was used to illustrate this method. Blends of SPEKK/PEI with a 3:7 mass ratio were aligned using electric field strengths varying from 0 to 30 V/mm and frequencies varying from 0 to 10 kHz. In general, the degree of alignment agreed with theoretical predictions for the alignment of drops or particles suspended in a fluid with a different dielectric constant, e.g., when the frequency of the applied ac field was increased, the threshold field for phase alignment increased and the diameter of the oriented columnar structures decreased. Alignment resulted in up to three orders of magnitude increase in conductivity at low humidity. By careful selection of temperature and residual solvent content, alignment was shown to be possible in the melt state, which is essential for an economic process for producing alignment-enhanced membranes.     

Copper-catalyzed aerobic oxidative dehydrogenation for conversion of 2-(alkylthio)-1,4-dihydropyrimidines to 2-(alkylthio)pyrimidines

A simple and efficient aerobic oxidative dehydrogenation reaction method for the conversion of 2-(alkylthio)-1,4-dihydropyrimidines to 2-(alkylthio)pyrimidines using copper catalyst with no additives, such as an oxidant, acid, or base, has been developed. The reaction was successful with a wide range of 2-(alkylthio)-1,4-dihydropyrimidine substrates.