Electrochemical Detection of Hydrazine Based on Electrospun Palladium Nanoparticle/Carbon Nanofibers

In this work, we developed an electrochemical method for the detection of hydrazine based on palladium nanoparticle/carbon nanofibers (Pd/CNFs). Pd/CNFs were prepared by electrospinning technique and subsequent thermal treatments. The electrocatalytic behaviors of Pd/CNFs modified glassy carbon electrode (Pd/CNF‐GCE) for hydrazine oxidation were evaluated by cyclic voltammetry (CV), an obvious and well‐defined oxidation peak appeared at ?0.32 V (vs. Ag/AgCl). The mechanism of the oxidation of hydrazine at Pd/CNF‐GCE was also studied, which demonstrated an irreversible diffusion‐controlled electrode process and a four‐electron transfer involved in the overall reaction. Furthermore, the wide linear range, low detection limit, good reproducibility and excellent storage stability were obtained utilizing differential pulse voltammetry (DPV).     

Design of a Sensitive Electrochemical Sensor Based on Ferrocene-reduced Graphene Oxide/Mn-spinel for Hydrazine Detection

Herein, we report construction of a ferrocene-reduced graphene oxide-Mn spinel modified glassy carbon electrode (Fc−G/Mn₃O₄/GCE) as a sensitive electrochemical probe for hydrazine detection via its oxidation. The synergistic effect of ferrocene, graphene oxide and Mn₃O₄ provides it a great electrocatalytic effect. The electrochemical investigations of Fc−G/Mn₃O₄/GCE were studied using cyclic voltammetry, while differential pulse voltammetry was utilized for recording the electrocatalytic sensing of hydrazine. The prepared Fc−G/Mn₃O₄ offers a platform for sensitive and selective detection of low-level hydrazine in two linear ranges from 0.045 to 108 μM and 108 to 653 μM with limit of detection 8.5 nM. Real sample analysis was also performed in local industrial water samples with satisfactory recovery results.     

Electrochemical Study of Catechol and Hydroquinone Using Activated Glassy Carbon Electrodes

Abstract

Glassy carbon electrodes polished with some ceramics particles(TiB₂ SiC and TiC) show activation for the oxidation and reduction of catechol and hydroquinone. The activation was found to depend on the hardness of glassy carbon and ceramic particles.     

Zinc Oxide Modified Au Electrode as Sensor for an Efficient Detection of Hydrazine

ZnO nanoparticles (ZnO NPs) prepared by microwave heating technique are used to modify a gold electrode (ZnO/Au) for the hydrazine detection study. The synthesized product is well characterized by various techniques. Detailed electrochemical investigation of the oxidation of hydrazine on the ZnO/Au electrode in 0.02 M phosphate buffer solution (PBS) of pH 7.4 was carried out. A very low detection limit of 66 nM (S/N=4) and a wide linearity in current for a concentration range from 66.0×10^?3 to 415 µM was achieved by amperometry. The electrode was found to be stable for over a month when preserved in PBS.     

Flow Injection Analysis of Maleic Hydrazide Using an Electrochemical Sensor Based on Palladium‐Dispersed Carbon Paste Electrode

A new analytical methodology for the electrochemical detection of the herbicide maleic hydrazide (3,6‐dihydroxypyridazine) by flow injection analysis is presented. This method is supported by the novel application of a palladium‐dispersed carbon paste electrode as an amperometric sensor for this herbicide. Maleic hydrazide shows anodic electrochemical activity on carbon‐based electrodes (glassy carbon or carbon paste electrodes) in all the pH range. This electrochemical activity is enhanced using metal‐dispersed carbon paste electrodes, especially at Pd‐dispersed CPE which displays good oxidation signals at 690 mV (0.050 M phosphate buffer pH 7.0), 140 mV lower than at unmodified electrodes. Under the optimized conditions, the electroanalytical performance of Pd‐dispersed CPE in flow injection analysis was excellent, with good reproducibility (RSD 3.3%) and a wide linear range (1.9×10^?7 to 1.0×10^?4 mol L^?1). A detection limit of 1.4×10^?8 mol L^?1 (0.14 ng maleic hydrazide) was obtained for a sample loop of 100 μL at a fixed potential of 700 mV in 0.050 M phosphate buffer solution at pH 7.0 and a flow rate of 2.0 mL min^?1. The proposed method was applied for the maleic hydrazide detection in natural drinking water samples.     

Palladium Sub‐Nanoparticle Decorated ‘Bamboo’ Multi‐Walled Carbon Nanotubes Exhibit Electrochemical Metastability: Voltammetric Sensing in Otherwise Inaccessible pH Ranges

A generic approach for the detection of electroactive species in potential ranges that would normally be inhibited due to the stripping of the electrocatalytic material is presented. We demonstrate, via the example of the electrochemical oxidation of hydrazine, that palladium nanoparticle (< 1 nm) decorated bamboo multi‐walled carbon nanotubes exhibit a metastability such that they allow the sensing of hydrazine in the pH range where palladium metal would normally be voltammetrically stripped (oxidized) from the surface of convectional electrodes.     

Synthesis of MnO2/MWNTs Nanocomposites Using a Sonochemical Method and Application for Hydrazine Detection

A sonochemical method has been successfully used to synthesize MnO₂/MWNTs nanocomposites. The structure and nature of the resulting MnO₂/MWNTs composite were characterized by scanning electron microscopy (SEM), energy‐dispersive X‐ray diffraction (EDX), X‐ray photoelectron spectroscopy (XPS).The results show that the sonochemically synthesized MnO₂ nanoparticles were homogeneously dispersed on the modified MWNT surfaces. The performance of the MnO₂/MWNTs nanocomposites modified electrode was characterized using cyclic voltammetry (CV) and Nyquist plots. The electrode exhibits efficient electron transfer ability and high electrochemical response towards hydrazine. This may be attributed to the small particle size, high dispersion of MnO₂ particles. The fabricated hydrazine sensor showed a wide linear range of 5.0×10^?7–1.0×10^?3 M with a response time less than 5 s and a detection limit of 0.2 μM. Taking the advantage of the unique properties of both MWNTs and MnO₂, it would greatly broaden the applications of MWNTs and MnO₂.     

磁性分子印迹电化学传感法检测痕量奥卡西平

该文以4-乙烯基吡啶和甲基丙烯酸酯为原料制备了一种可用于检测奥卡西平（OXC）的磁性分子印迹 电化学传感器（MNPs－MIP/MCPE）。首先,依据密度泛函数理论（DFT/B3LYP/6－31 + G）计算,实验成功地 筛选和构建出 OXC与功能单体的最佳组合及比例。随后,基于沉淀聚合法合成了能够识别 OXC的磁性分子 印迹膜（MNPs－MIP）,将MNPs－MIP覆于碳糊电极（MCPE）表面制成MNPs－MIP/MCPE。采用差分脉冲伏安 法（DPV）将 MNPs－MIP/MCPE 传感器用于不同浓度 OXC 的测定。结果显示,传感器的峰电流信号随 OXC 浓 度的增大而增大,且OXC分别在5 × 10－8 ～3 × 10－6 mol/L和3 × 10－6 ～1. 5 × 10－4 mol/L浓度范围内与其峰电流 信号呈线性关系,其线性方程分别为：Ip （μA）= 1. 755 + 1. 097c（μmol/L）,相关系数（r）= 0. 999 7 和 Ip （μA）= 0. 131 + 5. 177c（μmol/L）,r = 0. 999 6。OXC的检出限（LOD = 3S/m）为2. 06 × 10－8 mol/L。该传感器成 功用于实际样品中OXC含量的检测,其回收率为99. 4%~101%,相对标准偏差（RSD）为1. 5%～2. 5%。     

Facile Synthesis of Pd Nanoparticle Modified Carbon Black for Electroanalysis: Application to the Detection of Hydrazine

Carbon black nanoparticles modified with palladium nanoparticles (Pd/CB) were prepared using a facile methodology. Stirring CB in an aqueous solution of palladium chloride was found to result in the spontaneous formation of Pd nanoparticles on the CB surface. The Pd/CB composite demonstrated high electrocatalytic activity towards hydrazine oxidation, with good stability and reproducibility. Three linear dynamic ranges of hydrazine determination were found between 5 µM and 50 mM. The limit of detection (LOD) for hydrazine was found to be 8.8 µM (based on 3σ). The sensitivity of unmodified CB to trace metal impurities present in certain common electrolytes is also noted.     

Fabrication of an Electrochemical Sensor Based on Multiwalled Carbon Nanotubes for Almotriptan

In the present work, the electrochemical behavior of an antimigraine drug, almotriptan malate (ALM), on a multiwalled carbon nanotube (MWCNT) film modified glassy carbon electrode under cyclic voltammetry was described for the first time. A significant enhancement in the oxidation peak current of ALM was noticed at MWCNT‐GCE. This property was exploited to develop a simple, sensitive and time‐saving differential pulse voltammetric method for the determination of ALM in bulk and pharmaceutical samples. A linear relationship was observed between concentration and peak current with a correlation coefficient of 0.9915 in the range of 0.25–37.5 µM ALM.     

Electrochemical Detection of 2,4,6-Trinitrotoluene Using Interdigitated Array Electrodes

Abstract

We describe the use of interdigitated array gold electrodes (IDAs) for the electrochemical detection of 2,4,6-trinitrotoluene (TNT). Our protocol generates a reversible redox couple (hydroxylamine/nitroso) from the initial reduction of TNT, which can be amplified using redox cycling at IDA electrodes. The IDA electrodes give a limit of detection for TNT at ～6 ng/mL with a linear response (r² = 0.998) between 10 and 10,000 ng/mL for static conditions and between 5 and 200 ng/mL for flow conditions (r² = 0.999).     

Electrochemical Sensor for the Quantification of Dopamine Using Glassy Carbon Electrodes Modified with Single‐Wall Carbon Nanotubes Covalently Functionalized with Polylysine

We report a dopamine electrochemical sensor based on the modification of glassy carbon electrodes (GCE) with polylysine‐functionalized single‐wall carbon nanotubes (SWCNT‐PLys). The resulting electrodes (GCE/SWCNT‐PLys) showed a significant improvement in the electrooxidation of dopamine with drastic decrease in the peak potentials separation and important enhancement in the associated currents. Dopamine was detected by differential pulse voltammetry‐adsorptive stripping with medium exchange at nanomolar levels even in the presence of high excess of ascorbic and uric acids. The sensor was successfully used for the quantification of dopamine in urine samples enriched with the neurotransmitter.     

Electrochemical Redox Behaviour of Temozolomide Using a Glassy Carbon Electrode

The electrochemical behaviour of temozolomide on a glassy carbon electrode has been investigated. The reduction of temozolomide is an irreversible process, pH dependent, and the mechanism involves the addition of one electron and one proton to C5 to form an anion radical, causing the irreversible breakdown of the tetrazinone ring. The oxidation mechanism of temozolomide is an irreversible, adsorption‐controlled process, pH dependent up to value close to the pK_a and occurs in two consecutive charge transfer reactions, with the formation of the hydroxylated product. The electroanalytical determination of TMZ led to a detection limit of 1.1 µM.     

Highly Selective and Sensitive Graphene Based Electrochemical Sensor for Quantification of Receptor Agonist Rizatriptan

A highly selective and sensitive electrochemical sensor has been developed by modification of a glassy carbon electrode (GCE) with graphene (GRP) for quantification of Rizatriptan. The significant increase of the peak current and the improvement of the oxidation peak potential indicate that the electrochemical sensor facilitates the electron transfer of Rizatriptan. The oxidation peak current was proportional to the Rizatriptan concentration in the range from 100 to 600 µg/mL with detection (LOD) and quantification limit (LOQ) of 36.52 and 121.73 µg/mL, respectively. The developed method was successfully employed for quantification of Rizatriptan in pharmaceutical formulations. The sensor shows great promise for simple, sensitive and quantitative detection of Rizatriptan.     

Zinc Oxide Nanoparticle‐modified Glassy Carbon Electrode as a Highly Sensitive Electrochemical Sensor for the Detection of Caffeine

Zinc oxide nanoparticles (ZnO NPs ) were prepared by a simple, convenient, and cost‐effective wet chemical method using the biopolymer starch. The prepared ZnO NPs were characterized by X‐ray diffraction (XRD ), scanning electron microscopy (SEM ), energy‐dispersive X‐ray (EDX ), Fourier transform infrared (FT‐IR ), and UV ‐visible spectroscopic techniques. The average crystallite size calculated from XRD data using the Debye–Scherer equation was found to be 15 nm. The electrochemical behavior of caffeine (CAF ) was studied using a glassy carbon electrode (GCE ) modified with zinc oxide nanoparticles by cyclic voltammetry (CV ) and differential pulse voltammetry (DPV ). Compared to unmodified GCE , ZnO NPs‐ modified GCE (ZnO NPs MGCE ) exhibited excellent electrocatalytic activity towards CAF oxidation, which was evident from the increase in the peak current and decrease in the peak potential. Electrochemical impedance study suggested that the charge‐transfer capacity of GCE was significantly enhanced by ZnO NPs . The linear response of the peak current on the concentrations of CAF was in the range 2–100 μM . The detection limit was found to be 0.038 μM. The proposed sensor was successfully employed for the determination of CAF in commercial beverage samples.     

中空介孔碳球修饰的丝网印刷碳电极用于尼古丁的电化学检测

将一步法合成的中空介孔碳球(HMCS)修饰在丝网印刷碳电极(SPCE)上,得到了用于尼古丁电化学检测的新型电极(HMCS/SPCE)。通过扫描电子显微镜(SEM)、透射电子显微镜(TEM)、粉末X射线衍射(XRD)、X射线光电子能谱(XPS)以及拉曼光谱等方法对HMCS及修饰电极HMCS/SPCE进行表征。由于HMCS具有较大的电化学活性面积和良好的导电性,修饰电极HMCS/SPCE对尼古丁表现出良好的电催化活性。在优化实验条件下,电极HMCS/SPCE对尼古丁的检测线性范围为0~500μmol/L,灵敏度为0.850 m A/(cm~2·mmol·L~(-1)),检出限为0.058μmol/L。制备的传感器具有重复性好、稳定性高等特点,可用于实际烟草样品中尼古丁的检测。     

Electrode Modification through Click Chemistry Using Ni and Co Alkyne Phthalocyanines for Electrocatalytic Detection of Hydrazine

This work reports on the development of sensors for the detection of hydrazine using glassy carbon electrodes (GCE) modified with phthalocyanines through click chemistry. Tetrakis(5‐hexyn‐oxy) cobalt(II) phthalocyanine (complex 2 ) and tetrakis(5‐hexyn‐oxy) nickel(II) phthalocyanine (complex 3 ) were employed as electrode modifiers for hydrazine detection. The GCE was first grafted via the in situ diazotization of a diazonium salt, rendering the GCE surface layered with azide groups. From this point, the 1, 3‐dipolar cycloaddition reaction, catalysed by a copper catalyst was utilised to “click” the phthalocyanines to the surface of the grafted GCE. The modified electrodes were characterized by scanning electrochemical microscopy, X‐ray photoelectron spectroscopy and cyclic voltammetry. The electrografted CoP 2 ‐clicked‐GCE and NiP 3 ‐clicked‐GCE exhibited electrocatalytic activity towards the detection of hydrazine. The limit of detection (LoD) for the CoPc‐GCE was 6.09 μM, while the NiPc‐GCE had a LoD of 8.69 μM. The sensitivity was 51.32 μA mM⁻¹ for the CoPc‐GCE and 111.2 μA mM⁻¹ for the NiPc‐GCE.     

A New Approach how to Define the Coefficient of Electroactivity of Adenine and Its Twelve Derivatives Using Flow Injection Analysis with Amperometric Detection

We studied the electrochemical behaviour of adenine derivates (adenosine, 2‐aminopurine, 2,6‐diaminopurine, 6‐benzyl‐aminopurine, adenosine monophosphate, cyclic adenosine monophosphate, nicotinamide adenine dinucleotide, adenosine triphosphate, S‐adenosyl‐L ‐methionine, and synthetic derivatives AD‐3, AD‐6 and AD‐9) using flow injection analysis with electrochemical detection using a glassy carbon electrode. The influences of pH, flow rate and potential on the signal height of the studied derivates were tested. The optimal pH was 3, the flow rate of the mobile phase 0.75 mL min^?1 and the potential 1100 mV. Further, we attempted to characterize each of the studied derivatives by mathematical equations and classic analytical parameters. The lowest detection limit was estimated for adenine as 0.9 nM and 2‐aminopurine as 0.5 nM.     

Modifying Glassy Carbon (GC) Electrodes to Confer Selectivity for the Voltammetric Detection of L‐Cysteine in the Presence of dl‐Homocysteine and Glutathione

In this communication we report a proof of concept study of the use of cyclic voltammetry with a polyeugenol‐modified glassy carbon (GC) electrode to selectively detect L ‐cysteine in the presence of both dl ‐homocysteine and glutathione in perchloric acid. The formation of a polyeugenol‐modified gold electrode is also reported for the first time.     

Exploration of Stable Sonoelectrocatalysis for the Electrochemical Reduction of Oxygen

A series of modified electrodes were prepared both via solvent evaporation and electrochemical cycling of azobenzene and derivatives and various quinones and assessed for their suitability as oxygen reduction electrocatalysts and sonoelectrocatalysts. Glassy carbon electrodes were modified via solvent evaporation with 1,2‐dihydroxyanthraquinone and 1,2‐diazonium‐9,10‐anthraquinone while edge plane and basal plane pyrolytic graphite electrodes were modified by the same procedure with 9,10‐phenanthraquinone. The stability of the attached moiety was accessed in each case under ultrasound. For comparison the same electrode substrates were modified with 9,10‐phenanthraquinone by electrochemical cycling and also exposed to ultrasound. The observed results suggest the use of the glassy carbon electrodes modified with azobenzene and derivatives via solvent evaporation as the optimal carbon based sonoelectrocatalysts for oxygen reduction in term of stability under insonation and high catalytic rate.