A Metal‐Free Three‐Component Reaction for the Regioselective Synthesis of 1,4,5‐Trisubstituted 1,2,3‐Triazoles

A metal‐free three‐component reaction to synthesize 1,4,5‐trisubstituted 1,2,3‐triazoles from readily available building blocks, such as aldehydes, nitroalkanes, and organic azides, is described. The process is enabled by an organocatalyzed Knoevenagel condensation of the formyl group with the nitro compound, which is followed by the 1,3‐dipolar cycloaddition of the azide to the activated alkene. The reaction features an excellent substrate scope, and the products are obtained with high yield and regioselectivity. This method can be utilized for the synthesis of fused triazole heterocycles and materials with several triazole moieties.     

Tricholoroisocyanuric Acid as a Useful Reagent in Microwave‐assisted Aromatization of 1,3,5‐Trisubstituted 2‐Pyrazolines

An efficient aromatization of 1,3,5‐trisubstituted 2‐pyrazolines to their corresponding pyrazoles has been performed by tricholoroisocyanuric acid [TCCA] under microwave irradiation in excellent yields. It has been observed that the reactions occur more rapidly under microwave irradiation conditions, and the amount of the reagent TCCA consumed is considerably reduced to afford better yields when compared with conventional thermal conditions at the same temperature.     

Copper(I) and palladium nanoparticles supported on ethylenediamine‐functionalized cellulose as an efficient catalyst for the 1,3‐dipolar cycloaddition/direct arylation sequence

Cu(I) and nanoparticles of Pd supported on ethylenediamine‐functionalized cellulose as a novel bio‐supported catalyst was synthesized and characterized. The synthesized catalyst was found to be a highly efficient heterogeneous catalyst for the synthesis of 1,4,5‐trisubstituted 1,2,3‐triazoles through a sustainable 1,3‐dipolar cycloaddition/direct arylation sequence. The catalyst could be easily recovered by simple filtration and reused for at least five cycles without losing its activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Oxidative Aromatization of 1,3,5‐Trisubstituted 4,5‐Dihydro‐1H‐Pyrazoles Efficiently by Tetrabromine‐1,3,5,7‐Tetrazatricyclo[3.3.1.13,7]Decane Complex,Br4‐Tatcd,as a Novel Reagent both Under Microwave Irradiation and at Room Temperature

Oxidation of 1,3,5‐trisubstituted 4,5‐dihydro‐1H‐pyrazoles to the corresponding pyrazoles has been achieved by utilizing tetrabromine‐1,3,5,7‐tetrazatricyclo[3.3.1.1^3,7]decane complex, Br₄‐TATCD, in glacial acetic acid under microwave irradiation and conventional thermal condition at room temperature with excellent yields.     

A General Proline‐Catalyzed Synthesis of 4,5‐Disubstituted N‐Sulfonyl‐1,2,3‐Triazoles from 1,3‐Dicarbonyl Compounds and Sulfonyl Azide

An efficient proline‐catalyzed synthesis of 4,5‐disubstituted‐N‐sulfonyl‐1,2,3‐triazoles has been accomplished from 1,3‐dicarbonyl compounds and sulfonyl azides. The developed reaction is suitable for various symmetrical and unsymmetrical 1,3‐dicarbonyl compounds, tolerates various functional groups and affords 4,5‐disubstituted‐N‐sulfonyl‐1,2,3‐triazoles in good yield with excellent regioselectivity. Rhodium‐catalyzed denitrogenative functionalization of 4,5‐disubstituted‐N‐sulfonyl‐1,2,3‐triazoles further demonstrates their utility in organic synthesis.     

Multistep Flow Synthesis of 5‐Amino‐2‐aryl‐2H‐[1,2,3]‐triazole‐4‐carbonitriles

1,2,3‐Triazole has become one of the most important heterocycles in contemporary medicinal chemistry. The development of the copper‐catalyzed Huisgen cycloaddition has allowed the efficient synthesis of 1‐substituted 1,2,3‐triazoles. However, only a few methods are available for the selective preparation of 2‐substituted 1,2,3‐triazole isomers. In this context, we decided to develop an efficient flow synthesis for the preparation of various 2‐aryl‐1,2,3‐triazoles. Our strategy involves a three‐step synthesis under continuous‐flow conditions that starts from the diazotization of anilines and subsequent reaction with malononitrile, followed by nucleophilic addition of amines, and finally employs a catalytic copper(II) cyclization. Potential safety hazards associated with the formation of reactive diazonium species have been addressed by inline quenching. The use of flow equipment allows reliable scale up processes with precise control of the reaction conditions. Synthesis of 2‐substituted 1,2,3‐triazoles has been achieved in good yields with excellent selectivities, thus providing a wide range of 1,2,3‐triazoles.     

Pd‐NHC‐Catalyzed Direct Arylation of 1,4‐Disubstituted 1,2,3‐Triazoles with Aryl Halides

A highly efficient method for the synthesis of unsymmetrical multi‐substituted 1,2,3‐triazoles via a direct Pd‐NHC system catalyzed C(5)‐arylation of 1,4‐disubstituted triazoles, which are readily accessible via "click" chemistry has been developed. It is important to note that C? H bond functionalizations of 1,2,3‐triazoles with a variety of differently substituted aryl iodides and bromides as electrophiles can be conveniently achieved through this catalytic system at significantly milder reaction temperatures of 100°C under air.     

Microwave Induced Synthesis of 3‐Aryl‐6‐(6‐/8‐substituted 4‐chloroquinoline‐3‐yl) ‐ s ‐triazolo [3,4‐b] −1,3,4‐thiadiazoles

The condensation of 4‐amino‐3‐aryl‐5‐mercapto‐1, 2, 4‐triazoles (1a‐f) with 6‐/8‐substituted 1,4‐dihydro‐4‐oxo‐quinoline‐3‐carboxylic adds (2a‐d) in the presence of phosphorus oxychloride on refluxng or under microwave irradiation gave twenty four novel 3‐aryl‐6‐ (6‐/8‐substituted 4‐chloroquinoline‐3‐yl)‐s‐triazolo[3,4‐b]‐1, 3,4‐thiadiazoles (4a‐x), Considerable increase in the reaction rate has been observed with improved yields under microwave irradiation. The structures of the compounds synthesized were determined by elemental analyses, IR, ¹H NMR and MS spectra. Their spectral properties and the reaction mechanism were also discussed. The preliminary biological test showed that some of compounds bad moderate antibacterial activities.     

An Efficient and Convenient Synthesis of Ethyl 1‐(4‐Methoxyphenyl)‐5‐phenyl‐1H‐1,2,3‐triazole‐4‐carboxylate

The “click chemistry” of using organic azides and terminal alkynes is arguably the most efficient and straightforward route to the synthesis of 1,2,3‐triazoles. In this paper, an alternative and direct access to ethyl 1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐1,2,3‐triazole‐4‐carboxylate is described. Treatment of ethyl diazoacetate with 4‐methoxyaniline derived aryl imines in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene provided fully substituted 1,2,3‐triazoles in good to high chemical yields. The base‐mediated reaction tolerates various substituted phenyl imines as well as ethyl diazoacetate or the more bulky diazoacetamide. A reasonable mechanism is proposed that involves the addition of an imine nitrogen atom to the terminal nitrogen atom of the diazo compound, followed by aromatization to give the 1,2,3‐triazole. The presence of the 4‐carboxy group is advantageous as it can be easily transformed into other functional groups.     

Syntheses of 5‐alkylthio‐1,3‐diaryl‐1,2,4‐triazoles

Arylation of the readily available 3‐alkythio‐5‐aryl‐1,2,4‐triazoles gave 5‐alkylthio‐1,3‐diaryl‐1,2,4‐triazoles in moderate yield. The structures of the latter were confirmed by NOE and ¹³C‐NMR.     

4‐Aryl‐3,5‐bis(arylethynyl)aryl‐4H‐1,2,4‐triazoles: Multitasking Skeleton as a Self‐Assembling Unit

The synthesis of a series of 4‐aryl‐3,5‐bis(arylethynyl)aryl‐4H‐1,2,4‐triazoles derivatives is reported and the influence exerted by peripheral substitution on the morphology of the aggregates generated from these 1,2,4‐triazoles is investigated by SEM imaging. The presence of paraffinic side chains results in long fibrillar supramolecular structures, but unsubstituted triazoles self‐assemble into thinner ribbons and needle‐like aggregates. The crystals obtained from methoxy‐substituted triazoles have been utilised to elaborate a model that helps to justify aggregation of the investigated 1,2,4‐triazoles, in which the operation of arrays of C?H???π non‐covalent interactions plays a significant role. The results presented herein demonstrate the ability of simple molecules to behave as multitasking scaffolds with different properties, depending on peripheral substitution. Thus, although 1,2,4‐triazoles without long paraffinic side chains exhibit optical waveguiding behaviour, triazoles endowed with peripheral paraffinic side chains exhibit hexagonal columnar mesomorphism.     

Synthesis of new 2,2′‐disubstituted 5,5′‐dimethyl‐4,4′‐bitriazoles and 2‐(4‐Triazolyl)quinoxalines

Thermal rearrangement of 3‐acylisoxazole arylhydrazones allowed facile preparation of 2H‐1,2,3‐triazoles which were firstly reacted with isoamyl nitrite and then with an opportune arylhydrazine to produce the corresponding α‐hydroxyiminohydrazones 8a‐h . The reaction of compounds 8a‐h with phosphorus pentachloride afforded the desired 4,4′‐bitriazoles 1a‐h . The α‐hydroxyiminoketone derivative 7 or the α‐diketone 14 reacted easily with 1,2‐phenylenediamine to afford 1,2,3‐triazoles 2a‐c bearing the quinoxaline moiety at position 4. Improved yields of the quinoxalines 2a‐c were obtained when 1,2‐phenylenediamine was reacted with the dioxime 15.     

Efficient Atropodiastereoselective Access to 5,5′‐Bis‐1,2,3‐triazoles: Studies on 1‐Glucosylated 5‐Halogeno 1,2,3‐Triazoles and Their 5‐Substituted Derivatives as Glycogen Phosphorylase Inhibitors

Whereas copper‐catalyzed azide–alkyne cycloaddition (CuAAC) between acetylated β‐D ‐glucosyl azide and alkyl or phenyl acetylenes led to the corresponding 4‐substituted 1‐glucosyl‐1,2,3‐triazoles in good yields, use of similar conditions but with 2 equiv CuI or CuBr led to the 5‐halogeno analogues (>71 %). In contrast, with 2 equiv CuCl and either propargyl acetate or phenyl acetylene, the major products (>56 %) displayed two 5,5′‐linked triazole rings resulting from homocoupling of the 1‐glucosyl‐4‐substituted 1,2,3‐triazoles. The 4‐phenyl substituted compounds (acetylated, O‐unprotected) and the acetylated 4‐acetoxymethyl derivative existed in solution as a single form (d.r.>95:5), as shown by NMR spectroscopic analysis. The two 4‐phenyl substituted structures were unambiguously identified for the first time by X‐ray diffraction analysis, as atropisomers with aR stereochemistry. This represents one of the first efficient and highly atropodiastereoselective approaches to glucose‐based bis‐triazoles as single atropisomers. The products were purified by standard silica gel chromatography. Through Sonogashira or Suzuki cross‐couplings, the 1‐glucosyl‐5‐halogeno‐1,2,3‐triazoles were efficiently converted into a library of 1,2,3‐triazoles of the 1‐glucosyl‐5‐substituted (alkynyl, aryl) type. Attempts to achieve Heck coupling to methyl acrylate failed, but a stable palladium‐associated triazole was isolated and analyzed by ¹H NMR and MS. O‐Unprotected derivatives were tested as inhibitors of glycogen phosphorylase. The modest inhibition activities measured showed that 4,5‐disubstituted 1‐glucosyl‐1,2,3‐triazoles bind weakly to the enzyme. This suggests that such ligands do not fit the catalytic site or any other binding site of the enzyme.     

Syntheses of 1‐(4‐methylsulfonylphenyl)‐5‐aryl‐1,2,3‐triazoles and ‐(4‐aminosulfonylphenyl)‐5‐aryl‐1,2,3‐triazoles

Condensation of 4‐methylsulfonylaniline with aryl aldehyde in ethanol‐tetrahydrofuran afforded the imino compound 3 . 1,3‐Cycloaddtion of diazomethane with compound 3 followed by oxidazation of the triazoline 4 with potassium permanganate gave 1‐(4‐methylsulfonylphenyl)‐5‐aryl‐1,2,3‐triazoles 5 . Similarly, condensation of 4‐(N,N‐dibenzylaminosulfonyl)aniline with aryl aldehyde followed by 1,3‐cycloaddition of diazomethane with the imino compound 11 and the subsequent oxidation of triazoline 12 with potassium permanganate yielded the triazole 13 . Debenzylation of compound 13 with sulfuric acid gave the desired compound 1‐(4‐aminosulfonylphenyl)5‐aryl‐1,2,3‐triazoles 14 .     

A kinetic study of the high temperature rearrangement of 4‐ethyl‐3,5‐diphenyl‐4H‐1,2,4‐triazole

The kinetics of the thermal rearrangement 4‐ethyl‐3,5‐diphenyl‐4H‐1,2,4‐triazoles, 1 , to the corresponding 1‐ethyl‐3,5‐diphenyl‐1‐alkyl‐1H‐1,2,4‐triazoles, 2 , was studied in 15‐Crown‐5 and octadecane at 330 °C. The reaction was very slow in octadecane but proceed well in 15‐Crown‐5. The reaction order for the reaction was not constant but changed from an initial second order rate law towards a first order rate law as the reaction progressed. This was confirmed by the concentration dependent reaction order, n_c, which was larger than the time dependent rate law, n_t. The rationale for the observation was, that at high substrate concentrations the reaction order was second order while at lower concentrations a competing solvent assisted reaction plays an increasing important role. The data were in agreement with a mechanism in which the neutral 4‐alkyl‐triazoles in an intermolecular nucleophilic displacement reaction form a triazolium triazolate, which in a subsequent nucleophilic reaction gives the observed product.     

Microwave assisted synthesis of thiazolo[3,2‐b][1,2,4]‐triazoles containing 1,8‐naphthyridine moiety

A simple and efficient protocol for the synthesis of 5‐aryl‐2‐(2‐substituted‐1,8‐naphthyridin‐3‐yl)‐thiazolo[3,2‐b][1,2,4]triazoles ( 4 ) is achieved by cyclocondensation of 3‐(2‐substituted‐1,8‐naphthyridin‐3‐yl)‐1,2,4‐triazoles ( 3 ) with α‐halogenoketones in anhyd. methanol under microwave irradiation. The products are obtained in good yields and in a state of high purity.     

Supported copper (I) catalyst from fish bone waste: An efficient,green and reusable catalyst for the click reaction toward N‐substituted 1,2,3‐TRIAZOLES

An eco‐efficient, green, and multi‐gram procedure is presented for one‐pot multicomponent synthesis of N‐substituted 1,2,3‐triazoles by using waste fishbone powders supported CuBr (FBPs‐CuBr) as catalyst. FBPs‐CuBr is found to be an efficient heterogeneous catalyst and a series of 1,2,3‐triazoles are obtained in moderate to excellent yields in water under MW irradiation (70–98%). It can be separated conveniently by a simple filtration and reused at least seven consecutive runs with a slight drop in the product yields. Furthermore, the desired product still could be obtained in 80% yield when the scale of the reaction was increased to 40.0 mmol.     

Suzuki–Miyaura Cross‐Coupling of Potassium Organoborates with 6‐Sulfonate Benzimidazoles Using Microwave Irradiation

This article focuses on the utility of organotrifluoroborate salts as coupling partners for Suzuki–Miyaura cross‐coupling with 4‐nitro‐6‐triflyl benzimidazoles using microwave irradiation. The C–C bond formation at the 6‐position of the electron‐rich 1‐,4‐,6‐trisubstituted benzimidazole core is challenging and was not achievable via Kumada, Negishi, Stille, or Heck coupling strategies. Yields of 37–70% could be obtained via palladium coupling strategies utilizing potassium benzyl trifluoroborates as the organometallic coupling partner.     

Acid Catalyzed tert‐Butylation and Tritylation of 4‐Nitro‐1,2,3‐triazole: Selective Synthesis of 1‐Methyl‐5‐nitro‐1,2,3‐triazole via 1‐tert‐Butyl‐4‐nitro‐1,2,3‐triazole

4‐Nitro‐1,2,3‐triazole was found to react with tert‐butanol in concentrated sulfuric acid to yield 1‐tert‐butyl‐4‐nitro‐1,2,3‐triazole as the only reaction product, whereas tert‐butylation and tritylation of 4‐nitro‐1,2,3‐triazole in presence of catalytic amount of sulfuric acid in benzene was found to provide mixtures of isomeric 1‐ and 2‐alkyl‐4‐nitro‐1,2,3‐triazoles with predominance of N2‐alkylated products. A new methodology for preparation of 1‐alkyl‐5‐nitro‐1,2,3‐triazoles from 1‐tert‐butyl‐4‐nitro‐1,2,3‐triazole via exhaustive alkylation followed by removal of tert‐butyl group from intermediate triazolium salts was demonstrated by the example of preparation of 1‐methyl‐5‐nitro‐1,2,3‐triazole.     

[3+2]‐Cycloaddition for Fully Decorated Vinyl‐1,2,3‐Triazoles: Design,Synthesis and Applications

The s mall heterocyclic ring of the 1,2,3‐triazole module is one of the most widely investigated compounds in numerous applications of biological, medicinal, pharmaceutical and materially important molecules. In this regard, a large number of synthetic methodologies and approaches have already been reported to construct such a heterocyclic core structure in a selective manner. However, the vinyl‐substituted 1,2,3‐triazole moiety is another privileged segment in heterocyclic chemistry. The selective introduction of simple vinyl and functionalized vinyl groups onto the three different positions of the 1,2,3‐triazole framework can significantly improve the properties of the molecule. Accordingly, high‐yielding efficient approaches for the selective construction of vinyl‐containing 1,2,3‐triazoles becomes a promising branch of chemistry among practitioners of industry and academia. In this minireview, we have discussed recent advances in the construction of highly selective three different vinyl‐containing 1,2,3‐triazoles. In addition, representative synthetic methodologies and approaches for the corresponding three different classes of vinyl‐1,2,3‐triazoles and their applications have been described as well in this review.