Facile One‐Pot Synthesis of Monosubstituted 1‐Aryl‐1H‐1,2,3‐triazoles from Arylboronic Acids and Prop‐2‐ynoic Acid (=Propiolic Acid) or Calcium Acetylide (=Calcium Carbide) as Acetylene Source

The synthesis of monosubstituted 1‐aryl‐1H‐1,2,3‐triazoles was achieved in a one‐pot reaction from arylboronic acids and prop‐2‐ynoic acid or calcium acetylide (=calcium carbide), respectively, as a source of acetylene, with yields ranging from moderate to excellent (Scheme 1, Table 2). The reaction conditions were successfully applied to arylboronic acids, including analogs with various functionalities. Unexpectedly, the 1,2,3‐triazole moiety promoted a regioselective hydrodebromination (Scheme 2).     

‘Click Synthesis’ of 1H‐1,2,3‐Triazolyl‐Based Oxiconazole (=(1Z)‐1‐(2,4‐Dichlorophenyl)‐2‐(1H‐imidazol‐1‐yl)ethanone O‐[(2,4‐Dichlorophenyl)methyl]oxime) Analogs

The ‘click synthesis’ of some oxiconazole analogs 5a – 5v having 1H‐1,2,3‐triazolyl residues by Huisgen cycloaddition was achieved in four steps (Scheme 1). Oximation of phenacyl chloride ( 1 ) followed by azidation of 2‐chloro‐1‐phenylethanone oxime ( 2 ) provided azido ketoxime 3 . The CuI‐catalyzed Huisgen cycloaddition of 3 with terminal alkynes gave the 4‐substituted (at the triazole) 2‐(1H‐1,2,3‐triazol‐1‐yl)‐1‐phenylethanone oximes 4a – 4i . The O‐alkylation of 4a – 4i with various alkyl halides resulted in the formation of the target molecules 5a – 5v in good yields.     

Synthesis of 1,2,3‐Triazole Analogues of Lincomycin

In search for new antibiotics we replaced the amide moiety of lincomycin 1 by a 1,2,3‐triazole ring. The 1,2,3‐triazoles 10a – 10k were obtained as single regioisomers by ‘click reaction’ of azide 5 with the alkyne 9k , derived from propyl hygric acid, and the alkyl, aryl, or cycloalkyl alkynes ribosomes 9a – 9j . The new analogues proved inactive towards wild‐type and A2058G mutant.     

2‐Azido‐2‐deoxycellulose: Synthesis and 1,3‐Dipolar Cycloaddition

Chitosan ( 1 ) was prepared by basic hydrolysis of chitin of an average molecular weight of 70000 Da, ¹H‐NMR spectra indicating almost complete deacetylation. N‐Phthaloylation of 1 yielded the known N‐phthaloylchitosan ( 2 ), which was tritylated to provide 3a and methoxytritylated to 3b . Dephthaloylation of 3a with NH₂NH₂?H₂O gave the 6‐O‐tritylated chitosan 4a . Similarly, 3b gave the 6‐O‐methoxytritylated 4b . CuSO₄‐Catalyzed diazo transfer to 4a yielded 95% of the azide 5a , and uncatalyzed diazo transfer to 4b gave 82% of azide 5b . Further treatment of 5a with CuSO₄ produced 2‐azido‐2‐deoxycellulose ( 7 ). Demethoxytritylation of 5b in HCOOH gave 2‐azido‐2‐deoxy‐3,6‐di‐O‐formylcellulose ( 6 ), which was deformylated to 7 . The 1,3‐dipolar cycloaddition of 7 to a range of phenyl‐, (phenyl)alkyl‐, and alkyl‐monosubstituted alkynes in DMSO in the presence of CuI gave the 1,2,3‐triazoles 8 – 15 in high yields.     

New Convenient Five‐Component One‐Pot Synthesis of 3‐Alkyl‐6‐amino‐1,4‐dihydro‐4‐{[(1,2,3‐triazol‐4‐yl)methoxy]phenyl}pyrano[2,3‐c]pyrazole‐5‐carbonitrile Derivatives

3‐Alkyl‐6‐amino‐1,4‐dihydro‐4‐{[(1,2,3‐triazol‐4‐yl)methoxy]phenyl}pyrano[2,3‐c]pyrazole‐5‐carbonitrile derivatives were synthesized through a one‐pot five‐component condensation reaction.     

‘Click Synthesis’ of Some Novel O‐Substituted Oximes Containing 1,2,3‐Triazole‐1,4‐diyl Residues as New Analogs of β‐Adrenoceptor Antagonists

The ‘click synthesis’ of some novel O‐substituted oximes, 7a – 7t , which contain 1,2,3‐triazolediyl residues, as new analogs of β‐adrenoceptor antagonists is described (Schemes 1–4). The synthesis of these compounds was achieved in four to five steps. The formation of oximes of 9H‐fluoren‐9‐one and benzophenone, i.e., 9a and 9b , respectively, followed by their reaction with propargyl bromide, afforded O‐propargyl oximes 10a and 10b , respectively, which by a subsequent CuI‐catalyzed Huisgen cycloaddition with prepared β‐azido alcohols 11a – 11j (Schemes 2 and 3), led to the target compounds 7a – 7t in good yields.     

Convenient Synthesis of 1H‐Indol‐1‐yl Boronates via Palladium(0)‐Catalyzed Borylation of Bromo‐1H‐indoles with ‘Pinacolborane’

An atom‐economic Pd⁰‐catalyzed synthesis of a series of pinacol‐type indolylboronates 3 from the corresponding bromoindole substrates 2 and pinacolborane (pinBH) as borylating agent was elaborated. The optimal catalyst system consisted of a 1 : 2 mixture of [Pd(OAc)₂] and the ortho‐substituted biphenylphosphine ligand L‐3 (Scheme 4, Table). Our synthetic protocol was applied to the fast, preparative‐scale synthesis of 1‐substituted indolylboronates 3a – h in the presence of different functional groups, and at a catalyst load of only 1 mol‐% of Pd.     

A Novel 1‐Glycosyl‐1H‐triazole‐Based P,N Ligand for Rhodium‐Catalyzed Asymmetric Hydrosilylation of Ketones

A novel class of chiral glycosyl‐triazole‐based P,N ligands were synthesized by ‘click chemistry’ and were applied to the Rh‐catalyzed asymmetric hydrosilylation of a range of substituted acetophenones. Enantioselective hydrosilylation of acetophenone gave (S)‐1‐phenylethanol in moderate enantioselectivity (72% ee) and in good conversion (93%).     

A Copper‐Catalyzed Multicomponent Reaction and ‘Click Strategy’ for the Stereoselective Synthesis of a New Series of Oxazolone Peptidomimetics with α‐Acylamino Amide and β‐Amido Ketone Structures

A novel ‘click ligation’ strategy for the stereoselective synthesis of a medium‐size library of structurally complex and functionally diverse oxazolone peptidomimetics, which contain α‐acylamino carboxamide or β‐amido ketone residues, is presented. Most of these molecules have lipophilicity constant values (log P) in the qualifying range for cell permeability, and that indicates the possibilities of these new molecules to be used in the search for potential inhibitors for a broad spectrum of enzymes.     

Copper/Graphene/Clay Nanohybrid: A Highly Efficient Heterogeneous Nanocatalyst for the Synthesis of Novel 1,2,3‐Triazolyl Carboacyclic Nucleosides via ‘Click’ Huisgen 1,3‐Dipolar Cycloaddition

A very mild and highly efficient synthesis of some novel 1H‐1,2,3‐triazolyl carboacyclic nucleosides via a ‘Click’ Huisgen cycloaddition of N‐propargyl nucleobases and azido alcohols using Cu/aminoclay/reduced graphene oxide nanohybrid (Cu/AC/r‐GO nanohybrid) as nanocatalyst is described. The preparation and characterization of Cu/AC/r‐GO nanohybrid are discussed. This catalyst was characterized by X‐ray diffraction, FT‐IR, TEM, and energy‐dispersive analysis of X‐ray techniques. Cu/AC/r‐GO nanohybrid is a stable and highly efficient heterogeneous nanocatalyst that can be easily prepared, used, and restored from the reaction mixture by simple filtration, and reused for many consecutive trials without significant decrease in activity.     

The ‘Azirine/Oxazolone Approach’ to the Synthesis of Aib‐Pro Endothiopeptides

The reaction of methyl N‐(2,2‐dimethyl‐2H‐azirin‐3‐yl)‐L ‐prolinate ( 2a ) with thiobenzoic acid at room temperature gave the endothiopeptide Bz‐AibΨ[CS]‐Pro‐OMe ( 7 ) in high yield. In an analogous manner, (benzyloxy)carbonyl (Z)‐protected proline was transformed into the thioacid, which was reacted with 2a to give the endothiotripeptide Z‐Pro‐AibΨ[CS]‐Pro‐OMe ( 12 ). The corresponding thioacid of 7 was prepared in situ via saponification, formation of a mixed anhydride, and treatment with H₂S. A second reaction with 2a led to the endodithiotetrapeptide 9 , but extensive epimerization at Pro² was observed. Similarly, saponification of 12 and coupling with either 2a or H‐Phe‐OMe and 2‐(1H‐benzotriazol‐1‐yl)‐1,1,3,3‐tetramethyluronium tetrafluoroborate/1‐hydroxy‐1H‐benzotriazole (TBTU/HOBt) gave the corresponding endothiopeptides as mixtures of two epimers. The synthesis of the pure diastereoisomer BzΨ[CS]‐Aib‐Pro‐AibΨ[CS]‐N(Me)Ph ( 21 ) was achieved via isomerization of 7 to BzΨ[CS]‐Aib‐Pro‐OMe ( 16 ), transformation into the corresponding thioacid, and reaction with N,2,2‐trimethyl‐N‐phenyl‐2H‐azirin‐3‐amine ( 1a ). The structures of 12 and 21 were established by X‐ray crystallography.     

One‐Step Synthesis of Dialkyl 2‐[(4‐Methylphenyl)sulfonyl]‐1H‐pyrrole‐3,4‐dicarboxylates by Reaction of Acetylenedicarboxylates with ‘Tosylmethyl Isocyanide’ (TsMIC) and Triphenylphosphine

The reactive 1 : 1 adducts in the reaction between Ph₃P and dialkyl acetylenedicarboxylates have been trapped with ‘tosylmethyl isocyanide’ (TsMIC ; 1 ) to yield dialkyl 2‐[(4‐methylphenyl)sulfonyl]‐1H‐pyrrole‐3,4‐dicarboxylates 3 (Scheme 1). The structures of the highly functionalized compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 2).     

One‐Pot Synthesis of (1,2,3‐Triazolyl)methyl 3,4‐Dihydro‐2‐oxo‐1H‐pyrimidine‐5‐carboxylates as Potentially Active Antimicrobial Agents

A simple and efficient one‐pot four‐component procedure has been developed for the synthesis of a wide range of compounds containing the (triazolyl)methyl oxo‐pyrimidine‐carboxylate system from propargyl β‐keto esters, various azides, aldehydes, and urea in the presence of catalytic amounts of (AcO)₂Cu/sodium ascorbate in AcOH. The method worked well with different aryl and heteroaryl aldehydes, and for a variety of substituents in the triazolyl part of the molecule. The antimicrobial activities of the products were evaluated against two Gram‐positive and Gram‐negative bacteria, and one fungus. Compound 5j was active against Staphylococcus aureus and Candida albicans.     

Nucleosides and Oligonucleotides with Diynyl Side Chains: Base Pairing and Functionalization of 2′‐Deoxyuridine Derivatives by the Copper(I)‐Catalyzed Alkyne?Azide ‘Click’ Cycloaddition

Oligonucleotides containing the 5‐substituted 2′‐deoxyuridines 1b or 1d bearing side chains with terminal C?C bonds are described, and their duplex stability is compared with oligonucleotides containing the 5‐alkynyl compounds 1a or 1c with only one nonterminal C?C bond in the side chain. For this, 5‐iodo‐2′‐deoxyuridine ( 3 ) and diynes or alkynes were employed as starting materials in the Sonogashira cross‐coupling reaction (Scheme 1). Phosphoramidites 2b – d were prepared (Scheme 3) and used as building blocks in solid‐phase synthesis. T_m Measurements demonstrated that DNA duplexes containing the octa‐1,7‐diynyl side chain or a diprop‐2‐ynyl ether residue, i.e., containing 1b or 1d , are more stable than those containing only one triple bond, i.e., 1a or 1c (Table 3). The diyne‐modified nucleosides were employed in further functionalization reactions by using the protocol of the Cu^I‐catalyzed Huisgen–Meldal–Sharpless [2+3] cycloaddition (‘click chemistry’) (Scheme 2). An aliphatic azide, i. e., 3′‐azido‐3′‐deoxythymidine (AZT; 4 ), as well as the aromatic azido compound 5 were linked to the terminal alkyne group resulting in 1H‐1,2,3‐triazole‐modified derivatives 6 and 7 , respectively (Scheme 2), of which 6 forms a stable duplex DNA (Table 3). The Husigen–Meldal–Sharpless cycloaddition was also performed with oligonucleotides (Schemes 4 and 5).     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

Identification and structural characterization of the synthetic cannabinoid 3‐(1‐adamantoyl)‐1‐pentylindole as an additive in ‘herbal incense’

Since the end of 2010, more than 20 synthetic cannabimimetics have been identified in ‘Spice’ products, demonstrating the enormous dynamic in this field. In an effort to cope with the problem, many countries have already undertaken legal measures by putting some of these compounds under control. Nevertheless, once a number of compounds were scheduled, they were soon replaced by other synthetic cannabinoids. In this article, we report the identification of a new – and due to its substitution pattern rather uncommon – cannabimimetic found in several ‘herbal incense’ products. The GC–EI mass spectrum first led to misidentification as the alpha‐methyl‐derivative of JWH‐250. However, since both substances show different retention indices, thin‐layer chromatography was used to isolate the unknown compound. After application of nuclear magnetic resonance spectroscopy, high‐resolution MS and GC–MS/MS techniques, the compound was identified as 3‐(1‐adamantoyl)‐1‐pentylindole, a derivative of JWH‐018 carrying an adamantoyl moiety instead of a naphthoyl group. This finding supports that the listing of synthetic cannabinoids as prohibited substances triggers the appearance of compounds with uncommon substituents. Moreover, it emphasizes the necessity of being aware of the risk of misidentification when using techniques sometimes providing only limited structural information like GC–MS. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of Lanthanide(III) Chelates by Using ‘Click’ Chemistry

The copper(I)‐catalyzed dipolar [2+3] cycloaddition reaction of an azide and a terminal alkyne is exploited in the preparation of various europium(III), terbium(III), and dysprosium(III) chelates (Schemes 1–3). By changing the nature of the alkyne and the azide, a wide range of chelates and biomolecule‐labeling reactants were obtained. The photophysical properties (Table) of the synthesized chelates are also discussed.     

A One‐Pot Tandem Ugi Multicomponent Reaction (MCR)/Click Reaction as an Efficient Protecting‐Group‐Free Route to 1H‐1,2,3‐Triazole‐Modified α‐Amino Acid Derivatives and Peptidomimetics

By a one‐pot tandem Ugi multicomponent reaction (MCR)/click reaction sequence not requiring protecting groups, 1H‐1,2,3‐triazole‐modified Ugi‐reaction products 6a – 6n (Scheme 1 and Table 2), 7a – 7b (Table 4), and 8 (Scheme 2) were synthesized successfully. i.e., terminal, side‐chain, or both side‐chain and terminal triazole‐modified Ugi‐reaction products as potential amino acid units for peptide syntheses. Different catalyst systems for the click reaction were examined to find the optimal reaction conditions (Table 1, Scheme 1). Finally, an efficient Ugi MCR+Ugi MCR/click reaction strategy was elaborated in which two Ugi‐reaction products were coupled by a click reaction, thus incorporating the triazole fragment into the center of peptidomimetics (Scheme 3). Thus, the Ugi MCR/click reaction sequence is a convenient and simple approach to different 1H‐1,2,3‐triazole‐modified amino acid derivatives and peptidomimetics.     

Synthesis of (3,5‐Aryl/methyl‐1H‐Pyrazol‐1‐yl)‐(5‐Arylamino‐2H‐1,2,3‐Triazol‐4‐yl)Methanone

Some new (3,5‐aryl/methyl‐1H‐pyrazol‐1‐yl)‐(5‐arylamino‐2H‐1,2,3‐triazol‐4‐yl)methanones were synthesized and characterized by ¹HNMR, ¹³C NMR, MS, IR spectra data and elemental analyses or high resolution mass spectra (HRMS). During the procedure, Dimroth rearrangement was used in this synthesis.     

Synthesis and Cytotoxicity Studies of New (Dimethylamino)‐Functionalised and 7‐Azaindole‐Substituted ‘Titanocene’ Anticancer Agents (7‐Azaindole=1H‐Pyrrolo[2,3‐b]pyridine)

From the carbolithiation of 1‐(cyclopenta‐2,4‐dien‐1‐ylidene)‐N,N‐dimethylmethanamine (=6‐(dimethylamino)fulvene; 3 ) and different lithiated azaindoles 2 (1‐methyl‐7‐azaindol‐2‐yl, 1‐[(diethylamino)methyl]‐7‐azaindol‐2‐yl, and 1‐(methoxymethyl)‐7‐azaindol‐2‐yl), the corresponding lithium cyclopentadienide intermediates 4a – 4c were formed (7‐azaindole=1H‐pyrrolo[2,3‐b]pyridine). The latter underwent a transmetallation reaction with TiCl₄ resulting in the (dimethylamino)‐functionalised ‘titanocenes’ 5a – 5c . When the ‘titanocenes’ 5a – 5c were tested against LLC‐PK cells, the IC₅₀ values obtained were of 8.8, 12, and 87 μM , respectively. The most cytotoxic ‘titanocene’, 5a , with an IC₅₀ value of 8.8 μM is nearly as cytotoxic as cis‐platin, which showed an IC₅₀ value of 3.3 μM when tested on the epithelial pig kidney LLC‐PK cell line, and ca. 200 times better than ‘titanocene dichloride’ itself.