Cyclic Voltammetric Behavior of Nitrogen‐Doped Tetrahedral Amorphous Carbon Films Deposited by Filtered Cathodic Vacuum Arc

Nitrogen‐doped tetrahedral amorphous carbon (ta‐C : N) films were deposited by filtered cathodic vacuum arc (FCVA) technique using nitrogen as a background gas. The structure of the ta‐C : N films was studied with X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy in terms of nitrogen flow rate used during the film deposition. Potential windows of the films measured in deaerated and unstirred solutions, such as 0.5 M HCl, 0.1 M KCl, 0.1 M NaCl, 0.1 M KOH, and 0.1 M NaOH, were about 2.4, 2.32, 3.2, 3.1, and 3.25 V, respectively. This study showed that the potential windows of the ta‐C : N films were also affected by nitrogen flow rate. The ta‐C : N films used in this study had the desired voltammetric characteristics suitable for electrochemical analysis.     

Phosphorus carbides: theory and experiment

The recent finding that radio frequency plasma activation of CH(4)/PH(3) gas mixtures can yield films with P : C ratios < or = 3 has served to trigger further research into new 'phosphorus carbide' materials. Theoretical and experimental results relating to periodic and amorphous materials, respectively, are presented here: (i) The electronic structure and stability of different crystalline phosphorus carbide P(x)C(y) phases have been studied using first-principles density-functional theory. Calculations have been carried out for P(4)C(3+8 n) (n= 0-4), PC, and PC(3) and the most likely periodic structures examined in detail. Particular attention is paid to the composition PC(3), for which there are several possibilities of similar energy. (ii) Recent experimental efforts have involved use of pulsed laser ablation methods to produce hydrogen-free phosphorus carbide thin films. Mechanically hard, electrically conducting diamond like carbon films containing 0- approximately 26 at.% P have been deposited on both Si and quartz substrates by 193 nm PLA of graphite/phosphorus targets (containing varying percentages of phosphorus), at a range of substrate temperatures (T(sub)= 298-700 K), in vacuum, and analysed via laser Raman and X-ray photoelectron spectroscopy.     

Effects of CNT‐film Pretreatment on the Characteristics of NiCo2O4/CNT Core‐shell Hybrids as Electrode Material for Electrochemistry Capacitor

NiCo₂O₄/CNT nanocomposite films were fabricated by in‐situ growing ultrafine NiCo₂O₄ nanoparticles on acid‐modified carbon nanotube (CNT) films. The effects of CNT‐film pretreatment were investigated thoroughly by various characterization outfits including Fourier Transform Infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, RTS‐9 four‐point probes resistivity measurement system, X‐ray powder diffraction (XRD), scanning electron microscopy (SEM) and CHI660D electrochemical workstation. These results suggested that carbon nanotubes were uniformly wrapped by NiCo₂O₄ nanoparticles forming a hierarchical core‐shell structure. And the crystallinity, conductivity of the CNTs and detail structure (both morphology and size) of the NiCo₂O₄ nanoparticles varied with prolonged acid treatment time which resulted in increased functional groups and defects on CNT films and further affected the electrochemical properties. The composite film composed of the CNT film pretreated by mixed acid for 12 h exhibited excellent electrochemical properties: 828 F/g at 1 A/g and 656 F/g at 20 A/g, and maintained over 99 % of its capacitance after 3000 cycles of charge/discharge at 5 A/g. Acid treatment for either too long or too short is detrimental to the electrochemical properties of the composite films. Such work should be of fundamental importance for tailoring electrochemical properties by elaborate design of acid treatment on CNTs.     

Assembly of Ring‐Shaped Phosphorus within Carbon Nanotube Nanoreactors

A phosphorus allotrope that has not been observed so far, ring‐shaped phosphorus consisting of alternate P₈ and P₂ structural units, has been assembled inside multi‐walled carbon nanotube nanoreactors with inner diameters of 5–8 nm by a chemical vapor transport and reaction of red phosphorus at 500 °C. The ring‐shaped nanostructures with surrounding graphene walls are stable under ambient conditions. The nanostructures were characterized by high‐resolution transmission electron microscopy, scanning transmission electron microscopy, energy‐dispersive X‐ray spectroscopy, Raman scattering, attenuated total reflectance Fourier transform infrared spectroscopy, and X‐ray photoelectron spectroscopy.     

Electropolymerization of layer‐by‐layer precursor polymer films

The layer‐by‐layer (LbL) self‐assembly has been used to fabricate polymer thin films on any solid substrates. The multilayer polymer thin films are constructed by alternating adsorption of anionic and cationic polymers. Polyelectrolyte multilayer ultrathin films containing anionic poly[2‐(thiophen‐3‐yl)ethyl methacrylate‐co‐methacrylic acid]; P(TEM‐co‐MA) and cationic poly[4‐(9H‐carbazol‐9‐yl)‐N‐butyl‐4‐vinyl pyridium bromide]; P4VPCBZ, were fabricated. The growth of multilayer ultrathin films was followed by UV–Vis absorption spectrophotometer and surface plasmon resonance spectroscopy (SPR). The deposition of P(TEM‐co‐MA)/P4VPCBZ as multilayer self‐assembled ultrathin films regularly grow which showed linear growth of absorbance and thickness with increasing the number of layer pair. Cross‐linking of the layers was verified by cyclic voltammetry (CV), UV–Vis spectrophotometry and electrochemical surface plasmon resonance (EC‐SPR) spectroscopy with good electro‐copolymerizability. This was verified by spectroelectrochemistry. The SPR angular‐reflectivity measurement resulted in shifts to a higher reflectivity according to the change in the dielectric constant of the electropolymerized film. Copyright © 2011 John Wiley & Sons, Ltd.     

Phosphorus Centers of Different Hybridization in Phosphaalkene‐Substituted Phospholes

Phosphole‐substituted phosphaalkenes (PPAs) of the general formula Mes*P?C(CH₃)?(C₄H₂P(Ph))?R 5 a – c (Mes*=2,4,6‐tBu₃Ph; R=2‐pyridyl ( a ), 2‐thienyl ( b ), phenyl ( c )) have been prepared from octa‐1,7‐diyne‐substituted phosphaalkenes by utilizing the Fagan–Nugent route. The presence of two differently hybridized phosphorus centers (σ²,λ³ and σ³,λ³) in 5 offers the possibility to selectively tune the HOMO–LUMO gap of the compounds by utilizing the different reactivity of the two phosphorus heteroatoms. Oxidation of 5 a – c by sulfur proceeds exclusively at the σ³,λ³‐phosphorus atom, thus giving rise to the corresponding thioxophospholes 6 a – c . Similarly, 5 a is selectively coordinated by AuCl at the σ³,λ³‐phosphorus atom. Subsequent second AuCl coordination at the σ²,λ³‐phosphorus heteroatom results in a dimetallic species that is characterized by a gold–gold interaction that provokes a change in π conjugation. Spectroscopic, electrochemical, and theoretical investigations show that the phosphaalkene and the phosphole both have a sizable impact on the electronic properties of the compounds. The presence of the phosphaalkene unit induces a decrease of the HOMO–LUMO gap relative to reference phosphole‐containing π systems that lack a P?C substituent.     

Atomic Layer Deposition of Cobalt Phosphide for Efficient Water Splitting

Transition‐metal phosphides (TMP) prepared by atomic layer deposition (ALD) are reported for the first time. Ultrathin Co‐P films were deposited by using PH₃ plasma as the phosphorus source and an extra H₂ plasma step to remove excess P in the growing films. The optimized ALD process proceeded by self‐limited layer‐by‐layer growth, and the deposited Co‐P films were highly pure and smooth. The Co‐P films deposited via ALD exhibited better electrochemical and photoelectrochemical hydrogen evolution reaction (HER) activities than similar Co‐P films prepared by the traditional post‐phosphorization method. Moreover, the deposition of ultrathin Co‐P films on periodic trenches was demonstrated, which highlights the broad and promising potential application of this ALD process for a conformal coating of TMP films on complex three‐dimensional (3D) architectures.     

Flame‐retardant epoxy resins with high glass‐transition temperatures. II. Using a novel hexafunctional curing agent: 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐yl‐tris(4‐aminophenyl) methane

We synthesized a novel phosphorus‐containing triamine [9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐yl‐tris(4‐aminophenyl) methane (dopo‐ta)] from the nucleophilic addition of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide and pararosaniline chloride, using triethylamine as an acid receiver. We confirmed the structure of dopo‐ta by IR, mass, and NMR spectra and elemental analysis. dopo‐ta served as a curing agent for diglycidyl ether of bisphenol A (DGEBA) and dicyclopentadiene epoxy (hp7200). Properties such as the glass‐transition temperature (T_g), thermal decomposition temperature, flame retardancy, moisture absorption, and dielectric properties of the cured epoxy resins were evaluated. The T_g's of cured DGEBA/dopo‐ta and hp7200/dopo‐ta were 171 and 190 °C, respectively. This high T_g phenomenon is rarely seen in the literature after the introduction of a flame‐retardant element. The flame retardancy increased with the phosphorus content, and a UL‐94 V‐0 grade was achieved with a phosphorus content of 1.80 wt % for DGEBA/dopo‐ta/diamino diphenylmethane (DDM) systems and 1.46 wt % for hp7200/dopo‐ta/DDM systems. The dielectric constants for DGEBA/dopo‐ta and hp7200/dopo‐ta were 2.91 and 2.82, respectively, implying that the dopo‐ta curing systems exhibited low dielectric properties. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5971–5986, 2005     

Synthesis and characterization of high voltage electrodeposited phosphorus doped DLC films

Phosphorus doped diamond-like carbon (DLC) films were firstly synthesized by the electrolysis of methanol-Triphenylphosphorus (PPh₃) solution under high voltage, atmospheric pressure and low temperature. The microstructure and morphology of the as-deposited films were analyzed by Raman spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. The measurements results suggested that phosphorus doping enhanced the carbon films graphitization and the doped phosphorus existed mainly in CP bonds with the P/C ratio of 0.034. The P-DLC films have larger surface roughness compared to the DLC film. Moreover, the formation of P-DLC films in liquid-phase electrodeposition was via the reactions of the –CH₃ and –P groups to form CPx network.     

Determination of the Absolute Configuration of Pentacoordinate Chiral Phosphorus Compounds in Solution by Using Vibrational Circular Dichroism Spectroscopy and Density Functional Theory

Vibrational circular dichroism (VCD) spectroscopic measurements and density functional theory (DFT) calculations have been used to obtain the absolute structural information about four sets of diastereomers of pentacoordinate spirophosphoranes derived separately from l‐ (or d‐ ) valine and l‐ (or d‐ ) leucine for the first time. Each compound contains three stereogenic centers: one at the phosphorus center and two at the amino acid ligands. Extensive conformational searches for the compounds have been carried out and their vibrational absorption (VA) and VCD spectra have been simulated at the B3LYP/6‐311++G** level. Although both VA and VCD spectra are highly sensitive to the structural variation of the apical axis, that is, the O? P? O or N? P? O arrangement, the rotamers generated by the aliphatic amino side chains show little effect on both. The dominant experimental VCD features in the 1100–1500 cm^?1 region were found to be controlled by the chirality at the phosphorus center, whereas those at the C?O stretching region are determined by the chirality of the amino acid ligands. The good agreement between the experimental VA and VCD spectra in CDCl₃ solution and the simulated ones allows us to assign the absolute configurations of these pentacoordinate phosphorus compounds with high confidence. This study shows that the VCD spectroscopy complemented with DFT calculations is a powerful and reliable method for determining the absolute configurations and dominating conformers of synthetic phosphorus coordination complexes in solution.     

Structural and electrochemical studies of annealed LiNiVO4 thin films

We prepared stoichiometric lithium nickel vanadate amorphous thin films by using r.f. magnetron sputtering under controlled oxygen partial pressure. The amorphous films were heated at various temperatures, 300–600 °C, for 8 h. The as‐deposited and annealed thin films were characterized by Rutherford backscattering spectroscopy, nuclear reaction analysis, Auger electron spectroscopy, X‐ray diffraction, scanning electron microscopy and atomic force microscopy. The electrochemical behavior of the various films was studied by the galvanostatic method. The cells were tested in a liquid electrolyte at room temperature, with lithium metal used as the counter and reference electrode. The best electrochemical storage value was obtained with the thin film annealed at 300 °C, which showed superior capacity and small capacity loss during cycling. Copyright © 2007 John Wiley & Sons, Ltd.     

The Covalent Functionalization of Layered Black Phosphorus by Nucleophilic Reagents

Layered black phosphorus has been attracting great attention due to its interesting material properties which lead to a plethora of proposed applications. Several approaches are demonstrated here for covalent chemical modifications of layered black phosphorus in order to form P−C and P‐O‐C bonds. Nucleophilic reagents are highly effective for chemical modification of black phosphorus. Further derivatization approaches investigated were based on radical reactions. These reagents are not as effective as nucleophilic reagents for the surface covalent modification of black phosphorus. The influence of covalent modification on the electronic structure of black phosphorus was investigated using ab initio calculations. Covalent modification exerts a strong effect on the electronic structure including the change of band‐gap width and spin polarization.     

Azide Passivation of Black Phosphorus Nanosheets: Covalent Functionalization Affords Ambient Stability Enhancement

Two‐dimensional (2D) black phosphorus (BP) has a unique band structure, but it suffers from low ambient stability owing to its high reactivity to oxygen. Covalent functionalization has been demonstrated to passivate the reactive BP effectively, however the reported covalent functionalization methods are quite limited to aryl diazonium and nucleophilic additions affording P?C and P?O?C single bonds, for which the retaining of one unpaired electron in the Group 15 phosphorus atom hampers the passivation effect. Now, covalent azide functionalization of BP nanosheets (BPNSs) is reported, leading to significant enhancement of the ambient stability of BP as confirmed by UV/Vis spectroscopic studies. The most stable configuration of the azide functionalized BPNSs (f‐BPNSs) is predicted by theoretical calculations, featuring the grafting of benzoic acid moiety onto BPNSs via the unprecedented P=N double bonds formed through in situ nitrene as a reactive intermediate.     

Self‐Assembly of Gold Nanoparticles/Electroactive Polyelectrolyte Multilayer Films for Tunable Electrocatalysis

This study described fabrication, characterization, and application of multilayer films based on layer‐by‐layer assembly of ferrocene poly(ethylenimine) and gold nanoparticles. Assembly process of the multilayer film was investigated by atomic force microscopy, UV‐visible absorption spectroscopy and electrochemical impedance spectroscopy. The multilayer films exhibited a pair of well‐defined redox peaks as revealed by cyclic voltammetry, as well as bifunctional and fine‐tunable electrocatalysis for oxidation of ascorbic acid and reduction of oxygen. Both the outer layer and layer number had effect on the electrocatalytic response. Electrocatalytic activity of the films could be controlled with assemblies at the nanoscale level by simply adjusting deposition cycles or amount of component in the films.     

两种无灰型含磷/硫润滑添加剂在菜籽油中的摩擦学性能及膜分析

以合成的两种无灰型含磷/硫化合物为润滑添加剂, 以可生物降解的菜籽油作为基础油, 用四球机研究了体系的抗磨减摩性能, 以X射线光电子能谱(XPS)和X射线吸收精细结构光谱(XANES)对所形成的摩擦膜和热膜进行了表面分析, 并初步探讨了其润滑机理. 摩擦学研究结果表明, 两种含磷/硫化合物作为菜籽油的润滑添加剂时, 具有良好的抗磨减摩性能. XPS和XANES分析结果显示, 摩擦膜和热膜主要由吸附层和反应层组成; 在表面膜中, 磷主要以磷酸盐或焦磷酸盐等形式存在, 而硫主要以硫酸盐的形式存在. 研究结果还表明, 摩擦热在两种不同添加剂的摩擦膜形成过程中发挥着不同的作用.     

Effect of Power Density on the Electrochemical Properties of Undoped Amorphous Carbon (a‐C) Thin Films

Undoped a‐C thin films were deposited with varying power density from 10 to 25 W/cm² using unbalanced closed‐field magnetron sputtering (CFUBMS). The effect of power density on the physical and electrochemical properties was investigated by experimental characterization methods and atomistic simulations. XPS indicated that the films were composed mostly of sp²‐bonded carbon (55–58 at.%) with a small amount of oxygen (8–9 at.%) in the surface region. The films appeared completely amorphous in XRD. The I_D/I_G ratio obtained by Raman spectroscopy indicated an increase from 1.76 to 2.34 with power density. The experimental and simulated data suggested a possible ordering and/or clustering of the sp² phase with power density as the cause of the improved electrical properties of the a‐C films. The electrochemical properties of a‐C were between those of glassy carbon and tetrahedral amorphous carbon with potential windows ranging from 2.77 to 2.93 V and double‐layer capacitance values around 0.90 μF cm^?2. Electron transfer for Ru(NH₃)₆^3+/2+ and FcMeOH^+1/0 was reversible whereas that for IrCl₆^2?/3? was quasi‐reversible. Peak potential separation of dopamine and oxidation potential of ascorbic acid decreased with power density, correlating with the structural and electrical changes of the films. The a‐C thin films deposited by CFUBMS are inherently conductive and their physical properties can be adjusted by varying the deposition parameters to a wide range of electrochemical applications.     

Revisiting Phosphorus Analogues of Phthalimides and Naphthalimides: Syntheses and Comparative Studies

A series of phosphorus analogues of aromatic‐fused monoimides (phthalimides and naphthalimides) bearing a mesityl group on the P center have been synthesized. In a comparison of their photophysical, electrochemical, and thermal properties with those of the corresponding imides, the impact of P incorporation was revealed. Furthermore, theoretical studies using DFT methods were conducted to understand their properties.     

Penta-Coordinate Phosphorus Intermediates Analysis on Phospho-related Proteins

In this paper, based on known crystal structures of square pyramid （SP） and trigonal bipyramid （TBP） penta coordinated phosphorus compounds containing amino acid side chains, such as amino, carboxyl, hydroxyl or thiol, a software for survey the P（5）-structure of phosphorylated proteins was derived. By this software, it was found that 382 of 398 phosphorus related kinases （96%） from current PDB could go through the penta-coordinated phosphorus transition state or intermediate.     

Concurrent Phosphorus Doping and Reduction of Graphene Oxide

Doped graphene materials are of huge importance because doping with electron‐donating or electron‐withdrawing groups can significantly change the electronic structure and impact the electronic and electrochemical properties of these materials. It is highly important to be able to produce these materials in large quantities for practical applications. The only method capable of large‐scale production is the oxidative treatment of graphite to graphene oxide, followed by its consequent reduction. We describe a scalable method for a one‐step doping of graphene with phosphorus, with a simultaneous reduction of graphene oxide. Such a method is able to introduce significant amount of dopant (3.65 at. %). Phosphorus‐doped graphene is characterized in detail and shows important electronic and electrochemical properties. The electrical conductivity of phosphorus‐doped graphene is much higher than that of undoped graphene, owing to a large concentration of free carriers. Such a graphene material is expected to find useful applications in electronic, energy storage, and sensing devices.     

Stepwise Reduction of an α‐Phosphonio–Carbocation to a Crystalline Phosphorus Radical Cation and an Acridinyl–Phosphorus Ylide

We have synthesized the dicationic α‐phosphonio–carbocation 1²⁺ , which can be regarded as a two‐electron oxidized phosphorus ylide. Carbocation 1²⁺ exhibits two reversible reduction waves at ?0.28 and ?0.90 V (vs. Fc⁺/Fc) indicating that both the radical cation 1 ^{. +} and the neural phosphorus ylide 1 can be generated. Indeed, reduction of 1²⁺ with Zn afforded 1 ^{. +} as a dark green solid that was characterized by XRD and EPR spectroscopy, and reduction with Mg(Ant)?(THF)₃ gave 1 , which was characterized by ¹H and ³¹P NMR spectroscopy. Computational analyses reveal the stepwise population of a C?P π bonding orbital upon reduction of 1²⁺ .