On‐Off PVC Membrane Based Potentiometric Immunosensor for Label‐Free Detection of Alpha‐Fetoprotein

A poly(vinylchloride) (PVC) membrane based potentiometric immunosensor for the direct detection of alpha‐fetoprotein (AFP) has been developed. First, Au colloid particle was chemisorbed upon amino groups of o‐phenylenediamine, which were dissolved in plasticized PVC membrane. Then alpha‐fetoprotein antibody (anti‐AFP) was immobilized upon the surface of the Au colloid particle to prepare a potentiometric AFP immunosensor. The Au colloid particle modified PVC membrane was characterized by digital photo and transmission electron microscope (TEM). The immunosensor exhibited fast potentiometric response (≤4 min) and showed specific response to AFP in the range of 4.9 to 158.5 ng/mL with a correlation coefficient of 0.9971 and a detection limit of 1.6 ng/mL. The factors influencing the performance of the immunosensor were also studied in detail. Moreover, the proposed method is economical and efficient as well as potentially attractive for clinical immunoassays.     

Amperometric Immunosensor for the Determination of α‐1‐Fetoprotein Based on Core‐Shell‐Shell Prussian Blue‐BSA‐Nanogold Functionalized Interface

In the present work, a newly functional nanoparticle has been prepared to immobilize the protein for the detection of α‐1‐fetoprotein (AFP). Prussian blue (PB) nanoparticle was initially synthesized under ultrasonic condition, then bovine serum albumin (BSA) was used to coat the PB nanoparticle to improve the stability of the PB nanoparticle as well as functionalize the surface of PB nanoparticle, and then gold colloids were loaded on the BSA‐coated PB nanoparticle to construct a core‐shell‐shell nanostructure via the conjunction of thiolate linkages or alkylamines of the BSA. Finally, a convenient, effective and sensitivity amperometric immunosensor for the detection of α‐1‐fetoprotein (AFP) was constructed by the employment of these functional core‐shell‐shell microspheres. The preparation of the nanoparticle (Au‐BSA‐PB NPs) was characterized by transmission electron microscopy (TEM), and the assembly of the biosensor was characterized with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The dynamic range of the resulted immunosensor for the detection of AFP is from 0.02 ng/mL to 200.0 ng/mL with a detection limit of 0.006 ng/mL (S/N=3). Moreover, this biosensor displays good selectivity, stability and reproducibility.     

Biomolecule‐Doped Organic/Inorganic Hybrid Nanocomposite Film for Label‐Free Electrochemical Immunoassay of α‐1‐Fetoprotein

A new electrochemical immunosensor for the detection of α‐1‐fetoprotien (AFP) was developed based on AFP antibody (anti‐AFP)‐functionalized organic/inorganic hybrid nanocomposite membrane. To fabricate such a hybrid composite membrane, 3,4,9,10‐perylenetetracarboxylic acid‐bound thionine molecules (PTCTH) were initially doped into titania colloids (TiO₂), and then gold nanoparticles and anti‐AFP were immobilized onto the composite film in turn. Comparison with the electrode fabricated only with thionine not 3,4,9,10‐perylenetetracarboxylic acid, the immunosensor with PTCTH exhibited high sensitivity and fast electron transfer. The presence of gold nanoparticles provided a good microenvironment for the immobilization of biomolecules, enhanced the surface coverage of protein, and improved the sensitivity of the immunosensor. The modified process was characterized by scanning electron microscope (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The surface topography of the membrane was investigated by scanning electron microscopy (SEM). Under optimal conditions, the proposed immunosensor exhibited a wide linear range from 2.5 to 200.0 ng/mL towards AFP with a detection limit of 0.5 ng/mL (S/N=3). The stability, reproducibility and precision of the immunosensor were acceptable. Comparison with the conventional enzyme‐linked immunosorbent assay (ELISA), the present method did not require more labeled procedures and washing steps. Significantly, the detection methodology provides a promising approach for other proteins or biosecurities.     

A Dendrimer Supported Electrochemical Immunosensor for the Detection of Alpha‐feto protein – a Cancer Biomarker

The electrochemical detection of alpha‐feto protein based on novel gold nanoparticles‐ poly(propylene imine) dendrimer platform is reported. The platform was prepared by co‐electrodeposition of gold nanoparticles and generation 3 poly (propylene imine) dendrimer on a glassy carbon electrode. Each modifying step was characterised by cyclic voltammetry and electrochemical impedance spectroscopy. The electrochemical measurements showed that the platform was stable, conducting and exhibited reversible electrochemistry. Results obtained from the electrochemical impedance spectroscopy interrogation in [Fe(CN)₆^3−/4−] redox probe showed a marked reduction in charge transfer resistance (R_ct) after each modification step. The immunosensor was prepared by immobilisation of a probe anti‐alpha feto protein (AFP) on the platform for 3 hrs at 35 °C followed by blocking the surface with bovine serum albumin to minimise non‐specific binding. The prepared immunosensor was used to detect AFP over a wide concentration range from 0.005 to 500 ng/mL and detection limits of 0.0022 and 0.00185 ng/mL were obtained for SWV and EIS measurements respectively. The immunosensor gave good stability over a period of fourteen days when stored at 4 °C.     

Electrochemiluminescence immunosensor for the determination of ag alpha fetoprotein based on energy scavenging of quantum dots

An electrochemiluminescence (ECL) immunosensor for ultrasensitive detection of alpha fetoprotein (AFP) was fabricated using graphene-CdS quantum dots-alginate (G-CdS QDs-AL) as the immobilizing support and CdSe/ZnS QDs as the label. CdSe/ZnS QDs could effectively scavenge the ECL of G-CdS QDs-AL composite, and the quenched ECL intensity depended linearly on the logarithm for AFP concentration in the range from 0.05 to 500 fg/mL. The detection limit was 20 ag/mL. The proposed ECL immunoassay protocol for AFP detection is stable, specific, highly sensitive and promising for clinical application.     

A sensitive amperometric immunosensor for alpha-fetoprotein based on carbon nanotube/DNA/Thi/nano-Au modified glassy carbon electrode

A novel amperometric immunosensor for the determination of alpha-fetoprotein (AFP) was constructed using films of multi-wall carbon nanotubes/DNA/thionine/gold nanoparticles (nano-Au). Firstly, multi-wall carbon nanotubes (MWCNT) dispersed in poly(diallydimethlammonium chloride) (PDDA) were immobilized on the nano-Au film which was electrochemically deposited on the surface of glassy carbon electrode. Then a negatively charged DNA film was absorbed on the positively charged PDDA. Subsequently, thionine was attached to the electrode via the electrostatic interaction between thionine and the DNA. Finally, the nano-Au was retained on the thionine film for immobilization of AFP antibody (anti-AFP). The modification process was characterized by cyclic voltammetry (CV) and scanning electron microscope (SEM). The factors possibly influenced the performance of the proposed immunosensors were studied in detail. Under optimal conditions, the proposed immunosensor exhibited good electrochemical behavior to AFP in a two concentration ranges: 0.01–10.0 and 10.0–200.0 ng/mL with a relatively low detection limit of 0.04 ng/mL at three times the background noise. Moreover, the selectivity, repeatability and stability of the proposed immunosensor were acceptable.     

FeS2−AuNPs Nanocomposite as Mimicking Enzyme for Constructing Signal‐off Sandwich‐type Electrochemical Immunosensor Based on Electroactive Nickel Hexacyanoferrate as Matrix

In this work, a novel sandwich‐type electrochemical immunosensor with electroactive nickel hexacyanoferrate nanoparticles (NiHCFNPs) as matrix was constructed for α‐fetoprotein (AFP) detection in a signal‐off manner by using FeS₂?AuNPs nanocomposite catalyzed insoluble precipitation to significantly inhibit the electrochemical signal. Initially, the NiHCFNPs with excellent electrochemical property was modified on the electrodeposited nano‐Au electrode to obtain a strong initial electrochemical signal. Subsequently, another nano‐Au layer was formed for immobilization of capture antibody (Ab₁). In the presence of target AFP, the prepared FeS₂?AuNPs‐Ab₂ bioconjugate could be specifically recognized and immobilized on electrode through the sandwich‐type immunoreaction. The FeS₂ with large specific surface areas were used as scaffolds to load abundant mimicking enzyme AuNPs. With the help of hydrogen peroxide (H₂O₂), FeS₂?AuNPs with peroxidase‐like activity accelerated the 4‐chloro‐1‐naphthol (4‐CN) oxidation with generation of insoluble precipitation on electrode, which would greatly hinder the electron transfer and thus caused the decrease of electrochemical signal for quantitative determination of AFP. This approach achieved a wide dynamic linear range from 0.0001 to 100 ng mL^?1 with an ultralow limit detection of 0.028 pg mL^?1. Especially, the proposed AFP immunosensor can be applied to detect human serum samples with satisfactory results, indicating a potential application in clinical monitoring of tumor biomarkers.     

Graphene and Nanogold‐Functionalized Immunosensing Interface with Enhanced Sensitivity for One‐Step Electrochemical Immunoassay of Alpha‐Fetoprotein in Human Serum

A new electrochemical immunosensing protocol for sensitive detection of alpha‐fetoprotein (AFP, as a model) in human serum was developed by means of immobilization of horseradish peroxidase‐anti‐AFP conjugates (HRP‐anti‐AFP) onto graphene and nanogold‐functionalized biomimetic interfaces. The low‐toxic and high‐conductive graphene complex provided a large capacity for nanoparticulate immobilization and a facile pathway for electron transfer. With a one‐step immunoassay format, the antigen‐antibody complex was formed between the immobilized HRP‐anti‐AFP on the electrode and AFP in the sample. The formed immunocomplex was coated on the electrode surface, inhibited partly the active center of HRP, and decreased the catalytic reduction of HRP toward the enzyme substrate of H₂O₂. Under optimal conditions, the decrease of reduction currents was proportional to AFP concentration, and the dynamic range was 1.0–10 ng/mL with a relative‐low detection limit (LOD) of 0.7 ng/mL AFP. Intra‐ and inter‐assay coefficients of variation (CVs) were less than 10 %. The assay was evaluated for clinical human serum samples, including 8 (possible) patients with hepatocarcinoma and 3 normal human sera. Correct identification of negative/positive samples and perfect accordance with results from Elecsys 2010 Electrochemiluminescent Automatic Analyzer as a reference was obtained. Importantly, the graphene and nanogold‐based sensor provided a promising platform for the detection of other biocompounds, and could be further applied for development of other potential electrochemical bio/chemosensors.     

A Solid‐State Electrochemiluminescence Immunosensor Based on MWCNTs‐Nafion and Ru(bpy)32+/Nano‐Pt Nanocomposites for Detection of α‐Fetoprotein

A approach was successfully employed for constructing a solid‐state electrochemiluminescence (ECL) immunosensor by layer‐by‐layer self‐assembly of multiwall carbon nanotubes (MWCNTs)‐Nafion composite film, Ru(bpy)₃²⁺/nano‐Pt aggregates (Ru‐PtNPs) and Pt nanoparticles (PtNPs). The influence of Pt nanoparticles on the ECL intensity was quantitatively evaluated by calculating the electroactive surface area of different electrodes with or without PtNPs to immobilize Ru(bpy)₃²⁺. The principle of ECL detection for target α‐fetoprotein antigen (AFP) was based on the increment of resistance after immunoreaction, which led to a decrease in ECL intensity. The linear response range was 0.01–10 ng mL^?1 with the detection limit of 3.3 pg mL^?1. The immunosensor exhibited advantages of simple preparation and operation, high sensitivity and good selectivity.     

A novel electrochemiluminescent immunosensor based on the quenching effect of aminated graphene on nitrogen-doped carbon quantum dots

Nitrogen-doped carbon quantum dots (N-CQDs) with an average diameter of 2 nm were synthesized by carbonization of diethylene triamine pentacetate acid (DTPA). The simple prepared N-CQDs showed excellent electrochemiluminescence (ECL) property and were used as luminophors to fabricate a sandwich-type ECL immunosensor. Aminated graphene (NH₂-G) was also synthesized and used as a label of secondary antibody. The labeled NH₂-G could effectively quench the ECL of N-CQDs modified on electrodes due to ECL resonance energy transfer (ERET). Immunological recognition which induced ECL quenching enabled the quantitative determination of biomarkers. Alpha fetoprotein (AFP) was selected as a model analyte to investigate the analytical performance of the proposed immunosensor. Under optimal conditions, a good linear relationship between ECL intensity and the logarithm of AFP concentration was obtained in the range of 0.01–100 ng mL⁻¹ with the detection limit of 3.3 pg mL⁻¹. The proposed ECL immunosensor showed good stability, acceptable selectivity and reproducibility.     

A novel α-fetoprotein-MIP immunosensor based on AuNPs/PTh modified glass carbon electrode

A new alpha-fetoprotein-MIP (AFP-MIP) immunosensor based on glass carbon electrode (GCE) modified with polythionine (PTh) and gold nanoparticles (AuNPs) was successfully prepared for the sensitive detection of AFP. The AFP-MIP immunosensor presented a facile preparation, low sample consumption, and good stability, and could become a new promising method for the detection of AFP.     

Electrochemical Immunosensor for α‐Fetoprotein Based on Gold Nanoparticles/Graphene‐Prussian Blue

The electrochemical immunosensor for α‐fetoprotein (AFP) was fabricated based on the platform of gold nanoparticles (GNP)/graphene (Gr)‐prussian blue (PB). By electrodeposition, GNP were modified on the surface of the prepared Gr‐PB. The anti‐AFP‐1,1′‐ferrocenedicarboxylic acid (FcDA) as label was directly immobilized on the platform of GNP/Gr‐PB. And after the immunoreactions, the formed complex inhibited the electron transfer and decreased the catalytic current of FcDA toward the reduction of H₂O₂. And in the range of 10–3200 pg·mL^?1, the decreased current is linear with the concentration of AFP, with a detection limit of 3 pg·mL^?1. The developed immunoassay method showed good precision, high sensitivity, acceptable stability and reproducibility, and could be used for the detection of real samples with consistent results in comparison with those obtained by the enzyme linked immunosorbent assay (ELISA) method.     

The Signal‐Enhanced Label‐Free Immunosensor Based on Assembly of Prussian Blue‐SiO2 Nanocomposite for Amperometric Measurement of Neuron‐Specific Enolase

A signal‐enhanced label‐free electrochemical immunosensor was constructed by the employment of Prussian blue doped silica dioxide (PB‐SiO₂) nanocomposite. At first, PB‐SiO₂ nanocomposite which was produced by using a microemulsion method was used to obtain a nanostructural monolayer on a glassy carbon electrode (GCE) surface. Next amino‐functionalized interface were prepared by self‐assembling 3‐aminopropyltriethoxy silane (APTES) on the PB‐SiO₂ nanoparticle surface. Then chitosan stabled gold nanoparticle (CS‐nanoAu) was subsequently attached, while the entire surface was finally loaded with neuron‐specific enolase antibody (anti‐NSE) via the adsorption of gold nanoparticle. The sensitivity of the proposed immunosensor has greatly improved as the PB‐SiO₂ nanostructural sensing film provides plenty of active sites which might catalyze the reduction of H₂O₂. The immunosensor exhibited good linear behavior in the concentration range from 0.25–5.0 and 5.0–75 ng/mL for the quantitative analysis of neuron‐specific enolase (NSE), a putative serum marker of small‐cell lung carcinoma (SCLC), with a limit of detection of 0.08 ng/mL. The resulting NSE immunosensor showed high sensitivity and long‐term lifetime which can be attributed to the extremely high catalytic activity and biocompatibility of CS‐nanoAu/APTES/PB‐SiO₂ nanostructural multilayers.     

Portable smartphone-based microfluidic electrochemical immunosensor for ultrasensitive detection of alpha-fetoprotein in human serum

Rapid and accurate tracing of biomarkers is essential for early detecting and diagnosing of cancer. Therefore, a valid and convenient strategy needs to be developed for efficient monitoring of cancer biomarkers. Herein, we constructed a portable microfluidic electrochemical immunosensor based on three-dimensional reduced graphene oxide (3D rGO) doped with gold nanoparticles (Au NPs) for ultrasensitive determination of alpha-fetoprotein (AFP). The designed microfluidic chip, with the advantages of small injection volume, detachable structure and high integration, was fabricated by 3D printing, which only needed 9 μL of reagent to realize the high sensitivity detection. In addition, the 3D Au NPs-rGO composites with high specific surface area and electrons transfer capacity can effectively increase electroactive sites and enhance electrochemical signals. Benefiting from these features, the 3D Au NPs-rGO microfluidic electrochemical immunochip showed a wide detection range between 0.1 pg/mL–200 ng/mL and a best detection limit of 0.045 pg/mL with the high sensitivity of 175.008 μA (ng/mL)⁻¹ cm⁻². Meanwhile, the proposed immunosensor exhibited reliable AFP detection in human serum samples, which demonstrated that this portable smartphone-based microfluidic electrochemical immunosensor hold great promises in clinical detection and huge potential in personalized healthcare.     

Electrochemiluminescence Immunosensor Based on Functionalized Graphene/Fe3O4‐Au Magnetic Capture Probes for Ultrasensitive Detection of Tetrodotoxin

An ultrasensitive electrochemiluminescence (ECL) immunosensor for the detection of tetrodotoxin (TTX) is proposed, which are composed of the branched poly‐(ethylenimine) (BPEI) functionalized graphene (BGNs)/Fe₃O₄‐Au magnetic capture probes and luminol‐capped gold nanocomposites (luminol‐AuNPs) as the signal tag. Herein, a typical sandwich immunecomplex was constructed on the glassy carbon electrode. The BGNs/Fe₃O₄‐Au hybrids could efficiently conjugate primary antibody via the Au−S chemical bonds or Au−N chemical bonds and rapidly separate under external magnetic field. The introduction of BPEI to GO could enhance the luminol‐ECL intensity. Meanwhile, the multifunctional nanocomposites have been proved with good water‐solubility, excellent electron transfer, outstanding stability, etc. The luminescent luminol‐AuNPs, a high efficient electrochemiluminescence marker, can be assembled on the second antibody, which can produce the ECL signal to achieve the determination of TTX. This proposed ECL immunosensor with a linear range from 0.01–100 ng/mL can be applied in the detection of TTX in real samples with satisfactory results.     

Label‐Free Detection of Bisphenol A Using a Potentiometric Immunosensor

A potentiometric immunosensor for the label‐free detection of bisphenol A (BPA) was developed by covalently immobilizing a polyclonal antibody (PAb) onto the surface of a carboxylated poly(vinyl chloride) (PVC‐COOH) membrane. The immunosensor was characterized using scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy. The immobilization of PAb and its interaction with antigen (Ag) and BPA were also confirmed by quartz crystal microbalance (QCM) studies. Experimental parameters affecting the immuno‐interaction between PAb and its Ag or BPA were examined in terms of pH, antibody concentration, and temperature. The immunosensor showed a specific recognition of BPA with less interference than 4.8% from other common phenolic compounds. A calibration plot was obtained between 1.0 and 30.0 ng/mL and the detection limit was determined to be 0.6 ng/mL. The proposed immunosensor was applied for a real water sample spiked with BPA and the recoveries were in the range between 102.5 and 105.7%.     

Tetra-substituted Amino Aluminum Phthalocyanine as a New Red-region Fluorescent Substrate for Horseradish Peroxidase Based Enzyme-linked Immunosorbent Assay

ＩｎｔｒｏｄｕｃｔｉｏｎＥｎｚｙｍｅｉｍｍｕｎｏａｓｓａｙｂａｓｅｄｏｎａｓｅｌｅｃｔｉｖｅａｎｔｉｇｅｎ ａｎｔｉｂｏｄｙｂｉｎｄｉｎｇａｎｄａｌａｂｅｌｅｎｚｙｍｅｈａｓｇａｉｎｅｄｉｎｃｒｅａｓ ｉｎｇｉｍｐｏｒｔａｎｃｅｉｎｒｅｃｅｎｔｙｅａｒｓ .Ａｍｏｎｇｔｈｅｅｎｚｙｍｅｓｕｓｅｄ ,ｈｏｒｓｅｒａｄｉｓｈｐｅｒｏｘｉｄａｓｅ (ＨＲＰ)ｉｓｔｈｅｍｏｓｔｗｉｄｅｌｙｕｓｅｄｅｎｚｙｍｅｌａｂｅｌｂｅｃａｕｓｅｏｆｉｔｓｈｉｇｈｓｐｅｃｉｆｉｃｉｔｙａｎｄｓｅｎｓｉｔｉｖｉ ｔｙ .1 3 Ｆｌｕ…     

Interdigitated Conductometric Immunosensor for Determination of Interleukin‐6 in Humans Based on Dendrimer G4 and Colloidal Gold Modified Composite Film

A highly sensitive, fast and stable conductometric immunosensor for determination of interleukin‐6 (IL6) in humans is developed by encapsulation of horseradish peroxidase‐labeled interleukin‐6 antibody (HRP‐anti‐IL6) in poly(amidoamine) fourth‐generation dendrimer (dendrimer) and colloidal gold (nanogold) modified composite architecture. The presences of nanogold and dendrimer provided a congenial microenvironment for the immobilized biomolecules and decreased the electron transfer impedance, leading to a direct electrochemical behavior of the immobilized HRP. The formation of the antibody‐antigen complex by a simple one‐step immunoreaction between the immobilized HRP‐anti‐IL6 and IL6 in sample solution introduced a barrier of direct electrical communication between the immobilized HRP and the gold electrode surface, thus local conductivity variations could be detected by the HRP electrocatalytic reaction in 0.02 M phosphate buffer solution (pH 7.0) containing 50 μM H₂O₂, 0.01 M KI and 0.15 M NaC1. Under optimal conditions, the proposed immunosensor exhibited a good conductometric response to IL6 in a linear range from 30 to 300 pg/mL with a relatively low detection limit of 10 pg/mL at 3δ. The precision and reproducibility are acceptable with the intra‐assay CV of 7.3% and 5.6% at 100 and 200 pg/mL IL6, respectively. The storage stability of the proposed immunosensor is acceptable in a pH 7.0 PBS at 4 °C for 8 days. Importantly, the proposed methodology could be extended to the detection of other antigens or biocompounds.     

Fabrication of an electrochemical immunosensor for α-fetoprotein based on a poly-L-lysine-single-walled carbon nanotubes/Prussian blue composite film interface

Single-walled carbon nanotubes functionalized with poly-L-lysine (PLL-SWCNTs) were successfully prepared and were used as a biocompatible platform to immobilize α-fetoprotein antibody (anti-AFP) which was labeled with horseradish peroxidase (HRP). Then, anti-AFP-HRP/PLL-SWCNT nanocomposites were coated onto a Prussian blue (PB) film-modified glassy carbon electrode surface. Glutaraldehyde was used to further stabilize the biosensing interface through a cross-linking step. All unspecific sites were blocked by bovine serum albumin to fabricate a novel electrochemical immunosensor for α-fetoprotein determination. The immunosensor was characterized by voltammetry and electrochemical impedance spectroscopy. Based on the catalytic current response of H₂O₂, the experimental conditions for α-fetoprotein determination were optimized. Under optimal conditions, the current response was linearly related to α-fetoprotein concentration in the range of 0.05～10.0 and 10.0～50.0 ng/mL with a detection limit of 0.011 ng/mL. The immunosensor was successfully used for the determination of α-fetoprotein in human blood plasma. The results were satisfied with that obtained with ELISA, demonstrating a good accuracy of the immunosensor.     

A novel electrochemical immunosensor using β-cyclodextrins functionalized silver supported adamantine-modified glucose oxidase as labels for ultrasensitive detection of alpha-fetoprotein

In this work, a novel sandwich-type electrochemical immunosensor based on host-guest interaction was fabricated for the detection of alpha-fetoprotein (AFP). Due to the large specific surface area of multiwalled carbon nanotubes and the unique supramolecular recognition ability of β-cyclodextrins, ferrocenecarboxylic acid (Fc) was incorporated into this sensor platform by host-guest interaction to generate an electrochemical signal. And β-cyclodextrins functionalized silver supported adamantine-modified glucose oxidase (GOD-CD-Ag), was used as a label to improve the analytical performance of the immunosensor by the dual amplification strategy. The obtained GOD-CD-Ag conjugates could convert glucose into gluconic acid with the formation of hydrogen peroxide (H₂O₂). And then silver nanoparticles could in situ catalyze the reduction of the generated H₂O₂, dramatically improving the oxidation reaction of Fc. The developed immunosensor shows a wide linear calibration range from 0.001 to 5.0 ng/mL with a low detection limit (0.2 pg/mL) for the detection of AFP. The method, with ideal reproducibility and selectivity, has a wide application prospect in clinical research.