Pteridines. Part CXIX.

A variety of pyrimidine precursors 12 – 25 were converted into a series of new 7‐hydroxylumazines (=7‐hydroxypteridine‐2,4(1H,3H)‐diones) 26 – 35 which functioned as starting materials for the transformation into the corresponding 7‐chlorolumazines 36 – 45 . Subsequent reaction with hydrazine led to the 7‐hydrazinolumazines 46 – 55 which gave on nitrosation the 7‐azidolumazines 1 and 56 – 64 . These compounds were subjected to short heating in xylene whereby 1 and 56 – 61 showed a new pteridine–purine interconversion in forming a new type of 1,3‐disubstituted or 3‐substituted xanthin‐8‐amine‐derived nitrilium ylides (2,3,6,7‐tetrahydro‐N‐methylidyne‐2,6‐dioxo‐1H‐purin‐8‐aminium ylides) 11 and 65 – 70 . The presence of an additional 6‐alkyl substituent in the 7‐azidolumazines 63 and 64 or of an unsubstituted N(3) position in 62 caused further rearrangement to xanthine‐9‐carbonitriles 71 – 73 . Prolonged heating of 7‐azido‐1,3‐dimethyllumazine ( 1 ) also afforded theophylline‐9‐carbonitrile (=1,2,3,6‐tetrahydro‐1,3‐dimethyl‐2,6‐dioxo‐9H‐purine‐9‐carbonitrile; 5 ). The nitrilium ylide function was established by NMR and UV spectra as well as by elemental analyses. Confirmation of the nitrilium ylide structures was suggested by the result of the heating of 1,3‐dimethyl‐N‐methylidynexanthin‐8‐aminium ylide 11 in EtOH or of 1 in pentan‐1‐ol leading to 8‐aminotheophylline (=8‐amino‐3,7‐dihydro‐1,3‐dimethyl‐1H‐purin‐2,6‐dione; 74 ).     

Synthesis of Optically Active 1‐(1‐Phenylethyl)‐1H‐imidazoles Derived from 1‐Phenylethylamine

The three‐component reaction of (R)‐ or (S)‐1‐phenylethylamine ( 6 ), formaldehyde, and an α‐(hydroxyimino) ketone 5 , i.e., 3‐(hydroxyimino)butan‐2‐one ( 5a ) or 2‐(hydroxyimino)‐1,2‐diphenylethanone ( 5b ), yields the corresponding enantiomerically pure 1‐(1‐phenylethyl)‐1H‐imidazole 3‐oxide 7 in high yield (Schemes 2 and 3). The reactions are carried out either in MeOH or in AcOH. Smooth transformations of the N‐oxides into optically active 1‐(1‐phenylethyl)‐1H‐imidazoles 10 and 2,3‐dihydro‐1‐(1‐phenylethyl)‐1H‐imidazole‐2‐thiones 11 are achieved by treatment of 7 with Raney‐Ni and 2,2,4,4‐tetramethyl‐3‐thioxocyclobutanone ( 12 ), respectively (Scheme 4).     

Amino‐Claisen Rearrangements and Diels‐Alder Reactions of Ketene N,O‐Acetals: Reactivity Studies. On the Way to a Novel Tandem Process?

We report the synthesis of N‐benzyl‐N‐[(E)‐buta‐1,3‐dienyl]propanamide ( 6 ) and its corresponding O‐silyl‐substituted ketene N,O‐acetal 7 and their Diels‐Alder reaction. Propanamide 6 reacted smoothly, whereas the yield obtained from 7 was low, probably due to polymerization of the dienophile induced by electron transfer. The ketene N,O‐acetals 27a – g were synthesized starting from the corresponding benzamides 25a – e (Scheme 9). The ketene N,O‐acetals 27a – g showed increased stabilities and underwent amino‐Claisen rearrangements under thermal conditions. Using catalysts, interesting side reactions leading either to the annulated systems rac‐ 35 – 37 or to a β‐lactam rac‐ 34 were observed.     

Preparation of β2‐Amino Acid Derivatives (β2hThr, β2hTrp, β2hMet, β2hPro, β2hLys,Pyrrolidine‐3‐carboxylic Acid) by Using DIOZ as Chiral Auxiliary

The title compounds were prepared from valine‐derived N‐acylated oxazolidin‐2‐ones, 1 – 3, 7, 9 , by highly diastereoselective (≥ 90%) Mannich reaction (→ 4 – 6 ; Scheme 1) or aldol addition (→ 8 and 10 ; Scheme 2) of the corresponding Ti‐ or B‐enolates as the key step. The superiority of the ‘5,5‐diphenyl‐4‐isopropyl‐1,3‐oxazolidin‐2‐one’ (DIOZ) was demonstrated, once more, in these reactions and in subsequent transformations leading to various t‐Bu‐, Boc‐, Fmoc‐, and Cbz‐protected β²‐homoamino acid derivatives 11 – 23 (Schemes 3–6). The use of ω‐bromo‐acyl‐oxazolidinones 1 – 3 as starting materials turned out to open access to a variety of enantiomerically pure trifunctional and cyclic carboxylic‐acid derivatives.     

Ring Enlargement and Sulfur‐Transfer Processes in SiO2‐Catalyzed Reactions of Thiocarbonyl Compounds with Optically Active Oxiranes

The reactions of 1,3‐dioxolane‐2‐thione ( 3 ) with (S)‐2‐methyloxirane ((S)‐ 1 ) and with (R)‐2‐phenyloxirane ((R)‐ 2 ) in the presence of SiO₂ in anhydrous dichloroalkanes led to the optically active spirocyclic 1,3‐oxathiolanes 8 with Me at C(7) and 9 with Ph at C(8), respectively (Schemes 2 and 3). The analogous reaction of 1,3‐dimethylimidazolidine‐2‐thione ( 4a ) with (R)‐ 2 yielded stereoselectively (S)‐2‐phenylthiirane ((S)‐ 10 ) in 83% yield and 97% ee together with 1,3‐dimethylimidazolidin‐2‐one ( 11a ). In the cases of 3‐phenyloxazolidine‐2‐thione ( 4b ) and 3‐phenylthiazolidine‐2‐thione ( 4c ), the reaction with (RS)‐ 2 yielded the racemic thiirane (RS)‐ 10 , and the corresponding carbonyl compounds 11b and 11c (Scheme 4 and Table 1). The analogous reaction of 4a with 1,2‐epoxycyclohexane (= 7‐oxabicyclo[4.1.0]heptane; 7 ) afforded thiirane 12 and the corresponding carbonyl compound 11a (Scheme 5). On the other hand, the BF₃‐catalyzed reaction of imidazolidine‐2‐thione ( 5 ) with (RS)‐ 2 yielded the imidazolidine‐2‐thione derivative 13 almost quantitatively (Scheme 6). In a refluxing xylene solution, 1,3‐diacetylimidazolidine‐2‐thione ( 6 ) and (RS)‐ 2 reacted to give two imidazolidine‐2‐thione derivatives, 13 and 14 (Scheme 7). The structures of 13 and 14 were established by X‐ray crystallography (Fig.).     

On the Preparation of 2‐Substituted Cephalosporins,Part 2

Cephalosporin sulfoxides 1 and 2 containing an enone‐ or dienone‐type moiety at position 2 were treated with 2,3‐dimethylbuta‐1,3‐diene or diethyl azodicarboxylate to synthesize, in Diels? Alder reactions, the new cephalosporin derivatives 4 and 5 with a cyclic substituent (Scheme 1). Under the same conditions, ethyl diazoacetate and diazomethane reacted differently: while reactions of 1 and 3 with the former lead to compounds 7 – 10 corresponding to the 1,3‐dipolar cycloaddition route (Scheme 2), diazomethane produced only enol ethers 12 and 13 , respectively (Scheme 3). This difference could be rationalized by assuming two different reaction pathways: an orbital‐symmetry‐controlled concerted cycloaddition and an ionic one.     

Unexpected Formation of Dimethylthioketene Cycloadducts in the Reaction of 1,3‐Diphenylaziridine‐2,2‐dicarboxylate with Cyclobutanethione Derivatives

The reaction of 2,2,4,4‐tetramethyl‐3‐thioxocyclobutanone ( 1 ) with cis‐1‐alkyl‐2,3‐diphenylaziridines 5 in boiling toluene yielded the expected trans‐configured spirocyclic 1,3‐thiazolidines 6 (Scheme 1). Analogously, dimethyl trans‐1‐(4‐methoxyphenyl)aziridine‐2,3‐dicarboxylate (trans‐ 7 ) reacted with 1 and the corresponding dithione 2 , respectively, to give spirocyclic 1,3‐thiazolidine‐2,4‐dicarboxylates 8 (Scheme 2). However, mixtures of cis‐ and trans‐derivatives were obtained in these cases. Unexpectedly, the reaction of 1 with dimethyl 1,3‐diphenylaziridine‐2,2‐dicarboxylate ( 11 ) led to a mixture of the cycloadduct 13 and 5‐(isopropylidene)‐4‐phenyl‐1,3‐thiazolidine‐2,2‐dicarboxylate ( 14 ), a formal cycloadduct of azomethine ylide 12 with dimethylthioketene (Scheme 3). The regioisomeric adduct 16 was obtained from the reaction between 2 and 11 . The structures of 6b , cis‐ 8a , cis‐ 8b, 10 , and 16 have been established by X‐ray crystallography.     

Preparation of Polystyrene Beads with Dendritically Embedded TADDOL and Use in Enantioselective Lewis Acid Catalysis

A full account is given of the preparation and use of TADDOLates, which are dendritically incorporated in polystyrene beads (Scheme 1). A series of styryl‐substituted TADDOLs with flexible, rigid, or dendritically branching spacers between the TADDOL core and the styryl groups (2–16 in number) has been prepared ( 5 – 7, 20, 21, 26 in Schemes 2–4 and Fig. 1–3). These were used as cross‐linkers in styrene‐suspension polymerization, leading to beads of ca. 400‐μm diameter (Schemes 5 and 6, b). These, in turn, were loaded with titanate and used for the Lewis acid catalyzed addition of Et₂Zn to PhCHO as a test reaction (Scheme 6). A comparison of the enantioselectivities and degrees of conversion (both up to 99%), obtained under standard conditions, shows that these polymer‐incorporated Ti‐TADDOLates are highly efficient catalysts for this process (Table 1). In view of the effort necessary to prepare the novel, immobilized catalysts, emphasis was laid upon their multiple use. The performance over 20 cycles of the test reaction was best with the polymer obtained from the TADDOL bearing four first‐generation Fréchet branches with eight peripheral styryl groups ( 6 , p‐ 6 , p‐ 6 ⋅Ti(OⁱPr)₂): the enantioselectivity (Fig. 4), the rate of reaction (Fig. 5), and the swelling factor (Fig. 6) were essentially unchanged after numerous operations carried out with the corresponding beads of 400‐μm diameter and a degree of loading of 0.1 mmol TADDOLate/g polymer, with or without stirring (Fig. 7). The rate with the dendritically polymer‐embedded Ti‐TADDOLate (p‐ 6 ⋅Ti(OⁱPr)₂) was greater than that measured with the corresponding monomer, i.e., 6 ⋅Ti(OⁱPr)₂ (Fig. 8). Possible interpretations of this phenomenon are proposed. A polymer‐bound TADDOL, generated on a solid support (by Grignard addition to an immobilized tartrate ester ketal) did not perform well (Scheme 4 and Table 2). Also, when we prepared polystyrene beads by copolymerization of styrene, a zero‐, first‐, or second‐generation dendritic cross‐linker, and a mono‐styryl‐substituted TADDOL derivative, the performance in the test reaction did not rival that of the dendritically incorporated Ti‐TADDOLate ((p‐ 6 ⋅Ti(OⁱPr)₂) (Scheme 7 and Fig. 10). Finally, we have applied the dendritically immobilized Cl₂ and (TsO)₂Ti‐TADDOLate as chiral Lewis acid to preferentially prepare one enantiomer of the exo and the endo (3+2) cycloadduct, respectively, of diphenyl nitrone to 3‐crotonoyl‐1,3‐oxazolidinone; in one of these reaction modes, we have observed an interesting conditioning of the catalyst: with an increasing number of application cycles, the amount of polymer‐incorporated Lewis acid required to induce the same degree of enantioselectivity, decreased; the degrees of diastereo‐ and enantioselectivity were, again, comparable to those reported for homogeneous conditions (Fig. 9).     

Synthesis of [3,3′(4H,4′H)‐Bi‐2H‐1,3‐oxazine]‐4,4′‐diones and Their Hydrolysis

The [3,3′(4H,4′H)‐bi‐2H‐1,3‐oxazine]‐4,4′‐diones 3a – 3i were obtained by [2+4] cycloaddition reactions of furan‐2,3‐diones 1a – 1c with aromatic aldazines 2a – 2d (Scheme 1). So, new derivatives of bi‐2H‐1,3‐oxazines and their hydrolysis products, 3,5‐diaryl‐1H‐pyrazoles 4a – 4c (Scheme 3), which are potential biologically active compounds, were synthesized for the first time.     

Thermal [2+3]‐Cycloadditions of trans‐1‐Methyl‐2,3‐diphenylaziridine with CS and CC Dipolarophiles: An Unexpected Course with Dimethyl Dicyanofumarate

The thermal reaction of trans‐1‐methyl‐2,3‐diphenylaziridine (trans‐ 1a ) with aromatic and cycloaliphatic thioketones 2 in boiling toluene yielded the corresponding cis‐2,4‐diphenyl‐1,3‐thiazolidines cis‐ 4 via conrotatory ring opening of trans‐ 1a and a concerted [2+3]‐cycloaddition of the intermediate (E,E)‐configured azomethine ylide 3a (Scheme 1). The analogous reaction of cis‐ 1a with dimethyl acetylenedicarboxylate ( 5 ) gave dimethyl trans‐2,5‐dihydro‐1‐methyl‐2,5‐diphenylpyrrole‐3,4‐dicarboxylate (trans‐ 6 ) in accord with orbital‐symmetry‐controlled reactions (Scheme 2). On the other hand, the reactions of cis‐ 1a and trans‐ 1a with dimethyl dicyanofumarate ( 7a ), as well as that of cis‐ 1a and dimethyl dicyanomaleate ( 7b ), led to mixtures of the same two stereoisomeric dimethyl 3,4‐dicyano‐1‐methyl‐2,5‐diphenylpyrrolidine‐3,4‐dicarboxylates 8a and 8b (Scheme 3). This result has to be explained via a stepwise reaction mechanism, in which the intermediate zwitterions 11a and 11b equilibrate (Scheme 6). In contrast, cis‐1,2,3‐triphenylaziridine (cis‐ 1b ) and 7a gave only one stereoisomeric pyrrolidine‐3,4‐dicarboxylate 10 , with the configuration expected on the basis of orbital‐symmetry control, i.e., via concerted reaction steps (Scheme 10). The configuration of 8a and 10 , as well as that of a derivative of 8b , were established by X‐ray crystallography.     

Synthesis and heterocyclizations of 3‐alkynyl‐6,8‐dimethylpyrimido‐[4,5‐c]pyridazine‐5,7(6H,8H)‐diones and their lumazine analogues

Synthesis of some condensed pyrrolo‐, thieno‐, furo‐, pyrido‐ and pyranopteridines as well as isomeric pyrrolo‐ and thienopyrimido[4,5‐c]pyridazines from alkynyl derivatives of 6,8‐dimethylpyrimido[4,5‐c]pyridazine‐5,7(6H,8H)‐dione and 1,3‐dimethyllumazine is represented.     

Photochemical Reactions of N‐(2‐Halogenoalkanoyl) Derivatives of Anilines

The photochemical reactions of 2‐substituted N‐(2‐halogenoalkanoyl) derivatives 1 of anilines and 5 of cyclic amines are described. Under irradiation, 2‐bromo‐2‐methylpropananilides 1a – e undergo exclusively dehydrobromination to give N‐aryl‐2‐methylprop‐2‐enamides (=methacrylanilides) 3a – e (Scheme 1 and Table 1). On irradiation of N‐alkyl‐ and N‐phenyl‐substituted 2‐bromo‐2‐methylpropananilides 1f – m , cyclization products, i.e. 1,3‐dihydro‐2H‐indol‐2‐ones (=oxindoles) 2f – m and 3,4‐dihydroquinolin‐2(1H)‐ones (=dihydrocarbostyrils) 4f – m , are obtained, besides 3f – m . On the other hand, irradiation of N‐methyl‐substituted 2‐chloro‐2‐phenylacetanilides 1o – q and 2‐chloroacetanilide 1r gives oxindoles 2o – r as the sole product, but in low yields (Scheme 3 and Table 2). The photocyclization of the corresponding N‐phenyl derivatives 1s – v to oxindoles 2s – v proceeds smoothly. A plausible mechanism for the formation of the photoproducts is proposed (Scheme 4). Irradiation of N‐(2‐halogenoalkanoyl) derivatives of cyclic amines 5a – c yields the cyclization products, i.e. five‐membered lactams 6a , b , and/or dehydrohalogenation products 7a , c and their cyclization products 8a , c , depending on the ring size of the amines (Scheme 5 and Table 3).     

Synthesis of (2S)‐2‐(Benzoylamino)‐3‐(heteroaryl)propyl Benzoates

(3E,5S)‐1‐Benzoyl‐5‐[(benzoyloxy)methyl]‐3‐[(dimethylamino)methylidene]pyrrolidin‐2‐one ( 9 ) was prepared in two steps from commercially available (S)‐5‐(hydroxymethyl)pyrrolidin‐2‐one ( 7 ) (Scheme 1). Compound 9 gave, in one step, upon treatment with various C,N‐ and C,O‐1,3‐dinucleophiles 10 – 18 , the corresponding 3‐(quinolizin‐3‐yl)‐ and 3‐(2‐oxo‐2H‐pyran‐3‐yl)‐substituted (2S)‐2‐(benzoylamino)propyl benzoates 19 – 27 (Schemes 1 and 2).     

Pteridines. Part CXVIII

Our approach to achieve a partial synthesis of methanopterin ( 1 ) started from 6‐acetyl‐O⁴‐isopropyl‐7‐methylpterin ( 20 ) which was obtained either by condensation from 6‐isopropoxypyrimidine‐2,4,5‐triamine ( 19 ) and pentane‐2,3,4‐trione ( 6 ) or from 6‐isopropoxy‐5‐nitrosopyrimidine‐2,4‐diamine ( 21 ) and pentane‐2,4‐dione (=acetylacetone; 22 ) (Scheme 2). NaBH₄ reduction of 20 led to 6‐(1‐hydroxyethyl)‐O⁴‐isopropyl‐7‐methylpterin ( 23 ) which was converted into the corresponding 6‐(1‐chloroethyl) and 6‐(1‐bromoethyl) derivatives 24 and 25 . A series of nucleophilic displacement reactions in the side chain and at position 4 were performed as model reactions to give 26 – 29, 32 – 35 , and 39 – 41 . Hydrolysis of the substituents at C(4) led to the corresponding pterin derivatives 30, 31, 36 – 38 , and 42 . Analogously, 25 reacted with 1‐(4‐aminophenyl)‐1‐deoxy‐2,3: 4,5‐di‐O‐isopropylidene‐D ‐ribitol ( 43 ), prepared from N‐(4‐bromophenyl)benzamide ( 47 ) via 49 and 50 to give 1‐{4‐{{1‐[2‐amino‐7‐methyl‐4‐(1‐methylethoxy)pteridin‐6‐yl]ethyl}amino}phenyl}‐1‐deoxy‐D ‐ribitol ( 44 ) in 62% yield (Scheme 3). Acid cleavage of the isopropylidene groups at room temperature led to 45 and on boiling to 1‐{4‐{[1‐(2‐amino‐3,4‐dihydro‐7‐methyl‐4‐oxopteridin‐6‐yl)ethyl]amino}phenyl}‐1‐deoxy‐D ‐ribitol ( 46 ). The next step, however, attachment of the ribofuranosyl moiety with 55 or 56 to the terminal 1‐deoxy‐D ‐ribitol OH group could not been achieved. The second component, bis(4‐nitrobenzyl) 2‐{[(2‐cyanoethoxy)(diisopropylamino)phosphino]oxy}pentanedioate ( 61 ), to built‐up methanopterin ( 1 ) was synthesized from 2‐hydroxypentanedioic acid ( 59 ) and worked well in another model reaction on phosphitylation with N⁶‐benzoyl‐2′,3′‐O‐isopropylideneadenosine and oxidation to give 62 (Scheme 6).     

A New and Efficient Synthesis of the HMG‐CoA Reductase Inhibitor Pitavastatin

A new synthetic method for the preparation of pitavastatin is described. The approach circumvents various synthetic problems associated with the buildup of the 3,5‐dihydroxy‐C₇ acid side chain of HMG‐CoA reductase inhibitors (statins). The use of the C₆‐amide derivative 5 instead of ester derivatives in the coupling reaction with carboxaldehyde 8 (Scheme 3) prevents undesired side reactions, such as eliminations and retro‐aldol reactions. The method provides synthetic statins, such as pitavastatin, in >99% ee and exceptionally high overall yield. The enantiomerically pure starting material, (3S)‐3‐{[(tert‐butyl)dimethylsilyl]oxy}‐5‐oxo‐5‐{[(1S)‐1‐phenylethyl]amino}pentanoic acid ( 3c ), is prepared by an improved procedure from 3‐{[(tert‐butyl)dimethylsilyl]oxy}glutaric anhydride ( 1 ) and (1S)‐1‐phenylethylamine ( 2c ; Scheme 1).     

Diels-Alder Reactions of Ethyl α-Bromoacrylate with Open-chain Dienes——Synthesis of Ethyl 1,3-/1,4-Cyclohexadienecarboxylates

The Diels‐Alder reactions of ethyl α‐bromoacrylate 1 with open‐chain dienes 2 were conducted under thermal or Lewis acid‐catalysis conditions. In most cases, the cyclic adducts of 1‐bromocyclohex‐3‐enecarboxylates 3 were formed in high yields with good regio‐ and stereoselectivity. Subsequent E2‐elimination by treatment with DBU provided the corresponding 1,3‐ or 1,4‐cyclohexadienecarboxylates depending on the relative configuration of the products. Starting from myrcene (7‐methyl‐3‐methyleneocta‐1,6‐diene) the reaction sequence afforded the ester precursor of Georgywood with good yields.     

Synthesis,Olfactory Evaluation,and Determination of the Absolute Configuration of the 3,4‐Didehydroionone Stereoisomers

The synthesis of 3,4‐didehydroionone isomers 4 , (+)‐ 6 , and (?)‐ 6 and of 3,4‐didehydro‐7,8‐dihydroionone isomers 5 , (+)‐ 7 , and (?)‐ 7 was accomplished starting from commercially available racemic α‐ionone ( 1 ). Their preparation of the racemic forms 4 – 7 was first achieved by mean of a number of chemo‐ and regioselective reactions (Schemes 1 and 2). The enantio‐ and diastereoselective lipase‐mediated kinetic acetylation of 4‐hydroxy‐γ‐ionone ( 10a / 10b ) provided 4‐hydroxy‐γ‐ionone (+)‐ 10a /(±)‐ 10b and (+)‐4‐(acetyloxy)‐γ‐ionone ((+) 12b ) (Scheme 3). The latter compounds were used as starting materials to prepare the 3,4‐didehydro‐γ‐ionones (+)‐ and (?)‐ 6 and the 3,4‐didehydro‐7,8‐dihydro‐γ‐ionones (+)‐ and (?)‐ 7 in enantiomer‐enriched form. The absolute configuration of (+)‐ 12b was determine by chemical correlation with (+)‐(6S)‐γ‐ionone ((+)‐ 3 ) and with (?)‐(6S)‐α‐ionone ((?)‐ 1 ) therefore allowing to assign the (S)‐configuration to (+)‐ 6 and (+)‐ 7 . Olfactory evaluation of the above described 3,4‐didehydroionone isomers shows a significant difference between the enantiomers and regioisomers both in fragrance feature and in detection threshold (Table).     

7‐Halogenated 7‐Deazapurine 2′‐Deoxyribonucleosides Related to 2′‐Deoxyadenosine, 2′‐Deoxyxanthosine,and 2′‐Deoxyisoguanosine: Syntheses and Properties

A series of 7‐fluorinated 7‐deazapurine 2′‐deoxyribonucleosides related to 2′‐deoxyadenosine, 2′‐deoxyxanthosine, and 2′‐deoxyisoguanosine as well as intermediates 4b – 7b, 8, 9b, 10b , and 17b were synthesized. The 7‐fluoro substituent was introduced in 2,6‐dichloro‐7‐deaza‐9H‐purine ( 11a ) with Selectfluor (Scheme 1). Apart from 2,6‐dichloro‐7‐fluoro‐7‐deaza‐9H‐purine ( 11b ), the 7‐chloro compound 11c was formed as by‐product. The mixture 11b / 11c was used for the glycosylation reaction; the separation of the 7‐fluoro from the 7‐chloro compound was performed on the level of the unprotected nucleosides. Other halogen substituents were introduced with N‐halogenosuccinimides ( 11a → 11c – 11e ). Nucleobase‐anion glycosylation afforded the nucleoside intermediates 13a – 13e (Scheme 2). The 7‐fluoro‐ and the 7‐chloro‐7‐deaza‐2′‐deoxyxanthosines, 5b and 5c , respectively, were obtained from the corresponding MeO compounds 17b and 17c , or 18 (Scheme 6). The 2′‐deoxyisoguanosine derivative 4b was prepared from 2‐chloro‐7‐fluoro‐7‐deaza‐2′‐deoxyadenosine 6b via a photochemically induced nucleophilic displacement reaction (Scheme 5). The pK_a values of the halogenated nucleosides were determined (Table 3). ¹³C‐NMR Chemical‐shift dependencies of C(7), C(5), and C(8) were related to the electronegativity of the 7‐halogen substituents (Fig. 3). In aqueous solution, 7‐halogenated 2′‐deoxyribonucleosides show an approximately 70% S population (Fig. 2 and Table 1).     

Oligo(triacetylene) Derivatives with Pendant Long Alkyl Chains

Substituted (E)‐2‐(ethynyl)but‐2‐ene and (E)‐hex‐3‐ene‐1,5‐diyne derivatives 6 and 10 , respectively, were prepared by dicyclohexylcarbodiimide(DCC)‐mediated esterification of tris(dodecyloxy)benzoic acid ( 4 ) with (E)‐2‐[(triisopropylsilyl)ethynyl]but‐2‐ene‐1,4‐diol ( 3 ) and (E)‐2,3‐bis[(trimethylsilyl)ethynyl]but‐2‐ene‐1,4‐diol ( 8 ), respectively, followed by deprotection with Bu₄NF in wet THF (Schemes 1 and 2). Oligomerization reactions of diyne derivative 10 were attempted by treatment with the Hay catalyst in the presence of mono‐alkyne 6 as an end‐capping reagent. Under these conditions, only compound 7 resulting from the homocoupling of 6 (Scheme 1), and polymers of 10 were obtained due to the difference in reactivity of the alkyne groups in 6 and 10 . In contrast, when phenylacetylene was used as the stopper, the oligomerization of 10 afforded a mixture of end‐capped oligomers, from which 11 – 13 were isolated by column chromatography (Scheme 3). The poly(triacetylenes) (PTA) 16 – 18 were prepared in a similar manner starting from diol 8 and stearic acid (Schemes 4 and 5). Whereas the end‐capped monomers and dimers 11, 12, 16 , and 17 with pendant long alkyl chains do not exhibit any liquid‐crystalline behavior, the trimeric derivatives 13 and 18 show mesomorphic properties, thus demonstrating that the poly(triacetylene) backbone can behave as a mesogenic unit.     

1,3‐Dipolar Cycloadditions to (5Z)‐1‐Acyl‐5‐(cyanomethylidene)‐ imidazolidine‐2,4‐diones: Synthesis and Transformations of Spirohydantoin Derivatives

Cycloadditions of various 1,3‐dipoles to (5Z)‐1‐acyl‐5‐(cyanomethylidene)‐3‐methylimidazolidine‐2,4‐diones 8 or 9 , prepared in 3 steps from hydantoin ( 1 ) (Schemes 1 and 2), were studied. In all cases, reactions proceeded regio‐ and stereoselectively. The type of product depended on the 1,3‐dipole and/or dipolarophile employed as well as on reaction conditions. Thus, with stable dipoles under neutral conditions, spirohydantoin derivatives 12 – 16 were obtained (Scheme 2), while under basic or acidic conditions, pyrazole‐ or isoxazole‐5‐carboxamides 18 and 23 – 26 and carboxylate 27 were formed via aromatization of the newly formed dihydroazole ring, followed by the simultaneous cleavage of the hydantoin ring (Schemes 3 – 5).