Electrochemically Initiated Catalytic Oxidation of 5‐Thio‐2‐Nitrobenzoic Acid (TNBA) in the Presence of Thiols at a Boron Doped Diamond Electrode: Implications for Total Thiol Detection

The electrochemical response of 5,5‐dithiobis(2‐nitrobenzoic acid) (DTNB) to increasing additions of thiol species has been examined at a boron doped diamond electrode. A reaction has been shown to occur with a range of biologically relevant thiols and proceeds via a CECC' process. A total thiol detection methodology has been developed showing that the sensitivities of the standard addition plots are independent of the individual thiol species added to the solution. The analytical utility of the reaction process has been assessed using chronoamperometry with the corresponding data producing detection limits of 5.7 μM, 4.4 μM and 5.8 μM for the detection of cysteine, homocysteine and glutathione respectively.     

Disposable Amperometric Sensors for Thiols with Special Reference to Glutathione

The antioxidant ‘reduced glutathione’ tripeptide is conventionally called glutathione (GSH). The oxidized form is a sulfur‐sulfur linked compound, known as glutathione disulfide (GSSG). Glutathione is an essential cofactor for antioxidant enzymes; it provides protection also for the mitochondria against endogenous oxygen radicals. The ratio of these two forms can act as a marker for oxidative stress. The majority of the methods available for estimation of both the forms of glutathione are based on colorimetric and electrochemical assays. In this study, electrochemical sensors were developed for the estimation of both GSH and GSSG. Two different types of transducers were used: i) screen‐printed three‐electrode disposable sensor (SPE) containing carbon working electrode, carbon counter electrode and silver/silver chloride reference electrode; ii) three‐electrode disposable system (CDE) consisting of three copper electrodes. 5,5′‐dithiobis(2‐nitrobenzoic acid) (DTNB) was used as detector element for estimation of total reduced thiol content. The enzyme glutathione reductase along with a co‐enzyme reduced nicotinamide adenine dinucleotide phosphate was used to estimate GSSG. By combining the two methods GSH can also be estimated. The detector elements were immobilized on the working electrodes of the sensors by bulk polymerization of acrylamide. The responses were observed amperometrically. The detection limit for thiol (GSH) was less than 0.6 ppm when DTNB was used, whereas for GSSG it was less than 0.1 ppm.     

Ormosil Encapsulated Pyrroloquinoline Quinone‐Modified Electrochemical Sensor for Thiols

An organically modified sol‐gel glass (ORMOSIL) encapsulating pyrroloquinoline quinone (PQQ)‐modified electrode for the rapid, sensitive and simple determination of thiol‐containing compounds such as cysteine and glutathione is reported. The effect of applied potential, nature of thiol compound and pH on the response of the sensor was examined and optimum conditions were determined. The electrochemical responses and detection limits were found to be sensitive to the nature of thiols and pH. The electrochemical responses for cysteine and glutathione at an applied potential of ?0.2 V (vs. Ag/AgCl) were found to be linear with detection limits of 18 nM for cysteine and 36 nM for glutathione at pH 3.5, whereas the detection limits at pH 8.5 were 0.5 μM for cysteine and 1 μM for glutathione. The electrode retained 95% of the original response for 7 days when stored at 4 °C. The ORMOSIL‐encapsulated PQQ was also characterized by spectrophotometry. The absorbance measurement using 5,5′‐dithiobis(2‐nitrobenzoic acid) at 412 nm justify the PQQ‐mediated oxidation of glutathione whereas fluorescence measurements (excitation wavelength=380 nm; emission wavelength=480 nm) justify the successful encapsulation of PQQ in ORMOSIL matrix.     

The Electrochemical Oxidation of 5‐Thio‐2‐nitrobenzoic acid (TNBA) at a Boron Doped Diamond Electrode: Demonstration of a CEC Reaction

The oxidation of 5‐thio‐2‐nitrobenzoic acid (TNBA) over a wide pH range has been investigated using cyclic voltammetry at a boron doped diamond electrode. The reaction has been shown to proceed via a CEC reaction process in which at lower pH the thiol moiety of the TNBA species has to undergo deprotonation before oxidation. DIGISIM modelling of the voltammetric profiles deduced a value of 5.2 for the pK_a of the thiol moiety which is in good agreement with that obtained from spectrophotometric data. Also reported are the rate constants for all the heterogeneous and homogeneous processes.     

Underpotential Deposition and Stripping of Lead at Disorganized Monolayer‐Modified Gold Electrodes

Underpotential deposition (UPD) and stripping of Pb²⁺ at thiol‐based disorganized monolayer‐modified gold electrodes was studied by cyclic voltammetry (CV) and electrochemical quartz crystal microgravimetry (EQCM). Electrodes modified with mercaptoacetic acid or mercaptoethane sulfonic acid were studied. Due to the proximity of the potentials for the Pb UPD and thiol reductive desorption, achievement of a UPD‐stripping voltammetry methodology for determination of low concentrations of Pb²⁺ was not successful. However by comparison of the CV and EQCM data and consideration of the possible mass changes per mole electrons transferred in light of the other species present in solution, possible mechanisms are put forward for the deposition and stripping of Pb²⁺ at thiol‐modified electrodes.     

A Simple and Highly Sensitive Electrochemically Reduced p‐Nitrobenzoic Acid Film Modified Sensor for Determination of Mercury

Herein, a simple electrochemical sensor was fabricated for sensing Hg²⁺ ions by using electrochemically reduced p‐nitrobenzoic acid molecules modified (ERpNBA) glassy carbon electrode (GCE). The modified electrode was applied for the determination of Hg²⁺ ions by using differential pulse anodic stripping voltammetry (DPASV). Experimental parameters such as concentration of p‐nitrobenzoic acid used for electrode modification, pH, accumulation time and deposition potential used for the determination of Hg²⁺ ions were optimized. The strong interaction between the Hg²⁺ ions and the lone pair of electrons on the nitrogen atoms of ERpNBA molecules leads to highly selective adsorption of Hg²⁺ ions on the modified electrode. Under the optimum experimental conditions, the sensor showed higher sensitivity and very low detection limit for Hg²⁺ ions than other metal ions such as Cd²⁺, Pb²⁺ and Zn²⁺ ions. The LOD for Hg²⁺ ions was 240 pM which is below the guideline value given by the World Health Organization and the earlier reports.     

An electrochemical adaptation of Ellman's test

The electrochemically initiated reaction of thiols with N,N-diethyl-p-phenylenediamine has been coupled with an existing colorimetric sensing reaction developed by Ellman as a means of providing an electrochemical adaptation of the latter whereby the total thiol species present in a sample can be determined. The detection methodology has been proven to be robust with a linear range for cysteine from 2-120 microM, a limit of detection of 1.17 microM and has shown selectivity against a wide range of potential interferences. The efficiency of the methodology has been examined in the determination and recovery of thiol species in three growth tissue media, which contain a number of common biological interferences.     

Hydrogen‐bonded structures of the isomeric compounds of quinoline with 2‐chloro‐5‐nitrobenzoic acid, 3‐chloro‐2‐nitrobenzoic acid, 4‐chloro‐2‐nitrobenzoic acid and 5‐chloro‐2‐nitrobenzoic acid

The structures of four isomeric compounds, all C₇H₄ClNO₄·C₉H₇N, of quinoline with chloro‐ and nitro‐substituted benzoic acid, namely, 2‐chloro‐5‐nitrobenzoic acid–quinoline (1/1), (I), 3‐chloro‐2‐nitrobenzoic acid–quinoline (1/1), (II), 4‐chloro‐2‐nitrobenzoic acid–quinoline (1/1), (III), and 5‐chloro‐2‐nitrobenzoic acid–quinoline (1/1), (IV), have been determined at 185 K. In each compound, a short hydrogen bond is observed between the pyridine N atom and a carboxyl O atom. The N...O distances are 2.6476 (13), 2.5610 (13), 2.5569 (12) and 2.5429 (12) Å for (I), (II), (III) and (IV), respectively. Although in (I) the H atom in the hydrogen bond is located at the O site, in (II), (III) and (IV) the H atom is disordered in the hydrogen bond over two positions with (N site):(O site) occupancies of 0.39 (3):0.61 (3), 0.47 (3):0.53 (3) and 0.65 (3):0.35 (3), respectively.     

Amplified Electrochemical DNA Sensor Based on Polyaniline Film and Gold Nanoparticles

In this work, an electrochemical DNA biosensor, based on a dual signal amplified strategy by employing a polyaniline film and gold nanoparticles as a sensor platform and enzyme‐linked as a label, for sensitive detection is presented. Firstly, polyaniline film and gold nanoparticles were progressively grown on graphite screen‐printed electrode surface via electropolymerization and electrochemical deposition, respectively. The sensor was characterized by scanning electron microscopy (SEM), cyclic voltammetry and impedance measurements. The polyaniline‐gold nanocomposite modified electrodes were firstly modified with a mixed monolayer of a 17‐mer thiol‐tethered DNA probe and a spacer thiol, 6‐mercapto‐1‐hexanol (MCH). An enzyme‐amplified detection scheme, based on the coupling of a streptavidin‐alkaline phosphatase conjugate and biotinylated target sequences was then applied. The enzyme catalyzed the hydrolysis of the electroinactive α‐naphthyl phosphate to α‐naphthol; this product is electroactive and has been detected by means of differential pulse voltammetry. In this way, the sensor coupled the unique electrical properties of polyaniline and gold nanoparticles (high surface area, fast heterogeneous electron transfer, chemical stability, and ease of miniaturisation) and enzymatic amplification. A linear response was obtained over a concentration range (0.2–10 nM). A detection limit of 0.1 nM was achieved.     

Hydrogen‐bonded structures of the isomeric compounds of phthalazine with 3‐chloro‐2‐nitrobenzoic acid, 4‐chloro‐2‐nitrobenzoic acid and 4‐chloro‐3‐nitrobenzoic acid

The structures of three isomeric compounds, C₇H₄ClNO₄·C₈H₆N₂, of phthalazine with chloro‐ and nitro‐substituted benzoic acid, namely, 3‐chloro‐2‐nitrobenzoic acid–phthalazine (1/1), (I), 4‐chloro‐2‐nitrobenzoic acid–phthalazine (1/1), (II), and 4‐chloro‐3‐nitrobenzoic acid–phthalazine (1/1), (III), have been determined at 190 K. In the asymmetric unit of each compound, there are two crystallographically independent chloronitrobenzoic acid–phthalazine units, in each of which the two components are held together by a short hydrogen bond between an N atom of the base and a carboxyl O atom. In one hydrogen‐bonded unit of (I) and in two units of (II), a weak C—H...O interaction is also observed between the two components. The N...O distances are 2.5715 (15) and 2.5397 (17) Å for (I), 2.5655 (13) and 2.6081 (13) Å for (II), and 2.613 (2) and 2.589 (2) Å for (III). In both hydrogen‐bonded units of (I) and (II), the H atoms are each disordered over two positions with (N site):(O site) occupancies of 0.35 (3):0.65 (3) and 0.31 (3):0.69 (3) for (I), and 0.32 (3):0.68 (3) and 0.30 (3):0.70 (3) for (II). The H atoms in the hydrogen‐bonded units of (III) are located at the O‐atom sites.     

The Copper(II)‐Catalyzed Oxidation of Glutathione

The kinetics and mechanisms of the copper(II)‐catalyzed GSH (glutathione) oxidation are examined in the light of its biological importance and in the use of blood and/or saliva samples for GSH monitoring. The rates of the free thiol consumption were measured spectrophotometrically by reaction with DTNB (5,5′‐dithiobis‐(2‐nitrobenzoic acid)), showing that GSH is not auto‐oxidized by oxygen in the absence of a catalyst. In the presence of Cu²⁺, reactions with two timescales were observed. The first step (short timescale) involves the fast formation of a copper–glutathione complex by the cysteine thiol. The second step (longer timescale) is the overall oxidation of GSH to GSSG (glutathione disulfide) catalyzed by copper(II). When the initial concentrations of GSH are at least threefold in excess of Cu²⁺, the rate law is deduced to be ?d[thiol]/dt=k[copper–glutathione complex][O₂]^0.5[H₂O₂]^?0.5. The 0.5^th reaction order with respect to O₂ reveals a pre‐equilibrium prior to the rate‐determining step of the GSSG formation. In contrast to [Cu²⁺] and [O₂], the rate of the reactions decreases with increasing concentrations of GSH. This inverse relationship is proposed to be a result of the competing formation of an inactive form of the copper–glutathione complex (binding to glutamic and/or glycine moieties).     

Design and Synthesis of New Biprivileged Molecular Scaffolds: Indolo‐Fused Benzodiazepinyl/quinoxalinyl benzimidazoles

The present article describes the design and synthesis of new biprivileged molecular scaffolds with diverse structural features. Commercially available, simple heterocyclic building blocks such as 4‐fluoro‐3‐nitrobenzoic acid, 2‐chloro‐3‐nitrobenzoic acid, and indoline were utilized for the synthesis of the novel heterocycles. Pictet–Spengler‐type condensation was used as a key step to construct tetracyclic indolo‐benzodiazepines and indolo‐quinoxalines linked with substituted benzimidazoles. Analysis of single crystals of representative compounds showed that these molecular skeletons have the potential to present various substituents with distinct three‐dimensional orientations.     

Selective Electrochemical Determination of Paracetamol Using Nanostructured Film of Functionalized Thiadiazole Modified Electrode

This paper describes the selective electrochemical determination of paracetamol (PA) in the presence of important interferent, ascorbic acid (AA) using an ultrathin electropolymerized film of 5‐amino‐1,3,4‐thiadiazole‐2‐thiol (p‐ATT) modified glassy carbon (GC) electrode in 0.20 M phosphate buffer solution (pH 7.20). Bare GC electrode failed to resolve the voltammetric signals of AA and PA in a mixture. On the other hand, the p‐ATT modified electrode not only separated the voltammetric signals of AA and PA but also enhanced their peak currents. We achieved the lowest detection limit of 0.34 nM (S/N=3) for PA at p‐ATT modified electrode.     

Thread‐based microfluidic chips as a platform to assess acetylcholinesterase activity

In this paper, a microfluidic thread‐based analytical device (μTAD) to assess the activity of acetylcholinesterase (AChE) via colorimetric analylsis is described. Fabrication of the device consists of two platforms, both with a nylon thread trifurcated into three channels terminating at open analysis sites at the end of the thread. 5,5’‐Dithiobis‐(2‐nitrobenzoic acid) (DTNB) was spotted and dried on the analysis sites. Acetylthiocholine iodide (ATC) (or cysteine, Cys) is transported through an inlet channel of the nylon thread by capillary action due to the hydrophilic nature of nylon. AChE is transported through the other inlet channel and mixes with the ATC (or Cys) as they travel up to the analysis sites. As the solution reaches the analysis sites, an intense yellow color change occurs indicating the reaction of the thiol with DTNB to produce the yellow anion TNB²⁻. The sites are then dried, scanned, yielding a linear range of inverse yellow mean intensity versus substrate concentration. An IC₅₀ value (1.74 nM) with a known inhibitor, neostigmine bromide (NB), is obtained on the device. The multiplex design enables triplicate data collection in a device that is easy to use. μTADs have great potential to be employed in a myriad of tests including point‐of‐care diagnostic devices for resource‐challenged settings.     

Electrochemical Detection of DNA Hybridization Based on the Probe Labeled with Carbon‐Nanotubes Loaded with Silver Nanoparticles

A sensitive electrochemical method for the detection of DNA hybridization based on the probe labeled with multiwall carbon‐nanotubes (MWNTs) loaded with silver nanoparticles (Ag‐MWNTs) has been developed. MWNTs were electroless‐plated with a large number of silver nanoparticles to form Ag‐MWNTs. Probe single strand DNA (ss‐DNA) with a thiol group at the 3′‐terminal labeled with Ag‐MWNTs by self‐assembled monolayer (SAM) technique was employed as an electrochemical probe. Target ss‐DNA with a thiol group was immobilized on a gold electrode by SAM technique and then hybridized with the electrochemical probe. Binding events were monitored by differential pulse voltammetric (DPV) signal of silver nanoparticles. The signal difference permitted to distinguish the match of two perfectly complementary DNA strands from the near perfect match where just three base pairs were mismatched. There was a linear relation between the peak current at +120 mV (vs. SCE) and complementary target ss‐DNA concentration over the range from 3.1×10^?14 to 1.0×10^?11 mol/L with a detection limit of 10 fmol/L of complementary target ss‐DNA. The proposed method has been successfully applied to detection of the DNA sequence related to cystic fibrosis. This work demonstrated that the MWNTs loaded with silver nanoparticles offers a great promising approach for sensitive detection of DNA hybridization.     

A Nonenzymatic Glucose Sensor Using Nanoporous Platinum Electrodes Prepared by Electrochemical Alloying/Dealloying in a Water‐Insensitive Zinc Chloride‐1‐Ethyl‐3‐Methylimidazolium Chloride Ionic Liquid

We report here a nonenzymatic sensor by using a nanoporous platinum electrode to detect glucose directly. The electrode was fabricated by electrochemical deposition and dissolution of PtZn alloy in zinc chloride‐1‐ethyl‐3‐methylimidazolium chloride (ZnCl₂‐EMIC) ionic liquid. Both SEM and electrochemical studies showed the evidences for the nanoporous characteristics of the as‐prepared Pt electrodes. Amperometric measurements allow observation of the electrochemical oxidation of glucose at 0.4 V (vs. Ag/AgCl) in pH 7.4 phosphate buffer solution. The sensor also demonstrates significant reproducibility in glucose detection; the higher the roughness factor of the Pt electrode, the lower the detection limit of glucose. The interfering species such as ascorbic acid and p‐acetamidophenol can be avoided by using a Pt electrode with a high roughness factor of 151. Overall, the nanoporous Pt electrode is promising for enzymeless detection of glucose at physiological condition.     

Electrochemical Oxidation of Desipramine Drug in the Presence of 4,6‐Dimethylpyrimidine‐2‐thiol Nucleophile in Aqueous Acidic Medium

Electrochemical oxidation of desipramine (DES) has been studied in the presence of 4,6‐dimethylpyrimidine‐2‐thiol (DMPT) as nucleophile in acidic medium by means of cyclic voltammetry, controlled‐potential electrolysis and spectroscopic data, as diagnostic techniques. Voltammetric studies of electro‐oxidation of desipramine were realized in a range of pH 1.0 to 8.0 in the absence and presence of DMPT. The results indicate the participation of the product of electrochemical oxidation of desipramine in the reaction with DMPT with ECEC electrochemical mechanism. However, the voltammetry and coulometry results imply existence of a catalytic (EC′) electrochemical mechanism in parallel with ECEC electrochemical mechanism. The product has been characterized by IR, ¹H NMR, ¹³C NMR and MS methods.     

A Novel One Pot Synthesis of o‐Nitrophenylacetic Acid and Unexpected p‐Nitrobenzoic Acid by HNO3‐Mediated CH2 Extrusion Reaction of Phenylacetic Acid

The HNO₃‐mediated CH₂ extrusion reactions of phenylacetic acid lead to one pot synthesis of unexpected commercially important product 4‐nitrobenzoic acid through the formation of 4‐nitrophenylacetic acid and 2‐nitrophenylacetic acid.     

Study on surface acid-base property of carboxylic acid-terminated self-assembled monolayers by cyclic voltammetry and electrochemical impedance spectroscopy

Cyclic voltammetry and electrochemical impedance spec-troscopy were used to study the surface acid-base property of carboxylic acid-terminated self-assembled monolayers(SAMs).A carboxylic acid-terminated thiol,such as thioctic acid(1,2-dithiolane-3-pentanoic acid),was self-assembled on gold electrodes.Electron transfer between the bulk solution and the SAM modified electrode was studied at different pH using Fe(CN)63-as a probe.The surface pka of thioctic acid was determined by cyclic voltammetry and electrochemical impedance spectroscopy to be 5.6 ±0.1 and 5.8±0.1,respectively.The method is compared with other methods of monolayer pKa measurement.     

Development of a potential method based on microchip electrophoresis with fluorescence detection for the sensitive determination of intracellular thiols in RAW264.7 cells

This paper, for the first time, reported the development of a simple, rapid, and reliable method for the separation and sensitive determination of four thiol compounds including homocysteine, cysteine, glutathione, and N‐acetylcysteine based on glass MCE with fluorescence detection using a highly reactive fluorogenic probe, 1,3,5,7‐tetramethyl‐8‐phenyl‐(2‐maleimide)‐difluoroboradiaza‐s‐indacene (TMPAB‐o‐M), as the labeling reagent. TMPAB‐o‐M reacted selectively with thiols to produce highly fluorescent derivatives and the highest derivatization efficiency was achieved within 6 min in physiological conditions. After the optimization of separation conditions, a baseline separation of the four thiol compounds was achieved with the detection limits ranging from 2 nM for glutathione to 4 nM for cysteine (S/N = 3) and RSDs (n = 5) in the range of 3.2–3.8%. The proposed method was significantly sensitive compared to those using electrochemical or even LIF detection in MCE‐based setup reported previously, and applied to the determination of intracellular thiols in macrophage RAW264.7 cells.