Electrochemical Conversion of Magnetic Nanoparticles Using Disposable Working Electrode in a 3D‐Printed Electrochemical Cell

Exploration of new property/function of nanomaterials is always a strong impetus in the nanoscience field. Here, a new method of electrochemical conversion (ECC) of magnetic nanoparticles (MNPs) is proposed to endow MNPs with signal generation ability for sensing. Briefly, high potential was applied to split H₂O to generate acid, while Fe₃O₄ MNPs reacted with H⁺ and produce ferric/ferrous ions, which further reacted with K₄Fe(CN)₆ to yield Prussian blue (PB) through potential cycling. The ECC method worked well on both home‐made and commercial MNPs with different sizes. The generated PB possessed strong electrochemical activity for further applications. Interestingly, an uneven deposition of PB on working electrode and undesired contamination of the reference and counter electrodes were found when using commercial integrated three‐electrode chip. A 3D‐printed electrochemical cell was designed to facilitate the ECC and avoid drawbacks of commercial integrated electrode. The 3D‐printed electrochemical cell was proven to solve the problem above through spatial separation of electrodes and thus facilitated the ECC process. An electrochemical sensor for H₂O₂ detection based on the catalysis ability of ECC‐based PB exhibited a linear response from 5 μM to 1 mM, a high sensitivity of 269 μA mM^?1 cm^?2 and a low detection limit of 0.16 μM (S/N=3), which suggests its promising application prospect in electrochemistry‐related analysis.     

Palladium Nanoclusters Uniformly Enveloped Electrochemically Activated Graphene for Highly Sensitive Hydrogen Peroxide Sensor

Nonenzymatic sensors based on a metals nanocomposite with high sensitivity, selectivity, and stability has been received considerable interest. In this study, a novel electrochemical nanocomposite sensor based on palladium nanoclusters (PdNCs) decorated electrochemically activated graphene (EAGr) was established for highly sensitive nonenzymatic H₂O₂ sensor. The PdNCs/EAGr nanocomposite was fabricated via an electrochemical activation of Gr by the potential cycling in the range of +0.6 to ?1.8 V, followed by the electrodeposition of PdNCs at ?0.4 V applied potential. The homogeneous dispersion of PdNCs/EAGr nanocomposite were characterized by scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and linear sweep voltammetry (LSV). The PdNCs/EAGr nanocomposite electrode showed higher electrocatalytic activity towards the reduction of H₂O₂ in pH 7.0 of 0.1 M PBS by significantly enhancing the reduction peak current and reduced the reduction overpotential as well as eliminated other interfering species responses. The PdNCs/EAGr electrode displayed a wide linear range for H₂O₂ reduction from 1.0 to 1100 μM with limit of detection 0.02±0.01 μM. The higher sensitivity and selectivity as well as long‐time stability and excellent reproducibility obtained, indicating the proposed sensor is an effective H₂O₂ based sensor. In addition, the analytical application of the nancomposite sensor was successfully examined for the determination of H₂O₂ in the real sample of human urine indicating that the appreciable practicality of the nonenzymatic sensor for the determination of H₂O₂ in physiological fluids.     

Synthesis of Ferrocene Based Naphthoquinones and its Application as Novel Non‐enzymatic Hydrogen Peroxide

At present, a highly sensitive hydrogen peroxide (H₂O₂) sensor is fabricated by ferrocene based naphthaquinone derivatives as 2,3‐Diferrocenyl‐1,4‐naphthoquinone and 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone. These ferrocene based naphthaquinone derivatives are characterized by H‐NMR and C‐NMR. The electrochemical properties of these ferrocene based naphthaquinone are investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) on modified glassy carbon electrode (GCE). The modified electrode with ferrocene based naphthaquinone derivatives exhibits an improved voltammetric response to the H₂O₂ redox reaction. 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone show excellent non‐enzymatic sensing ability towards H₂O₂ response with a detection limitation of 2.7 μmol/L a wide detection range from 10 μM to 400 μM in H₂O₂ detection. The sensor also exhibits short response time (1 s) and good sensitivity of 71.4 μA mM^?1 cm^?2 and stability. Furthermore, the DPV method exhibited very high sensitivity (18999 μA mM^?1 cm^?2) and low detection limit (0.66 μM) compared to the CA method. Ferrocene based naphthaquinone derivative based sensors have a lower cost and high stability. Thus, this novel non‐enzyme sensor has potential application in H₂O₂ detection.     

Development of Nonenzymatic Hydrogen Peroxide Sensor Based on Successive Pd‐Ag Electrodeposited Nanoparticles on Glassy Carbon Electrode

A novel strategy to fabricate hydrogen peroxide (H₂O₂) sensor was developed by electrodepositing palladium? silver nanoparticles (NPs) on a glassy carbon electrode. The morphology of the modified electrode was characterized by Scanning electron microscopy (SEM). The result of electrochemical experiments showed that such constructed sensor had a favorable catalytic ability, high sensitivity, excellent selectivity towards reduction of hydrogen peroxide (H₂O₂). The response to H₂O₂ is linear in the range between 0.30 μM to 2.50 mM, and the detection limit is 0.1 μM (at an S/N of 3).     

The electrocatalytic reactions of adenine, guanine, H2O, H2O2, N2H4, and l -cysteine catalyzed by poly(Ni(4-TMPyP)) film-modified electrodes

Electrochemical preparation of poly(nickel tetrakis(N-methyl-4-pyridyl)porphyrin) tetratosylate (poly-Ni(4-TMPyP)) produces stable and electrochemically active films in strong and weak basic aqueous solutions. These films were produced on glassy carbon and gold electrodes. The electrochemical quartz crystal microbalance and cyclic voltammetry were used to study the in situ growth of poly(Ni(4-TMPyP)) films. The electrochemical properties of poly(Ni(4-TMPyP)) films indicate that the redox process was confined in to the immobilized film. The electrochemical quartz crystal microbalance results showed an ion exchange reaction for the redox couple. The polymer films showed one new redox couple when transferred to strong and weak basic aqueous solutions and the formal potential was found to be pH dependent. The electrocatalytic oxidation of H₂O by a nickel tetrakis(N-methyl-4-pyridyl)porphyrin film-modified electrode was also performed. The mechanism of oxygen evolution was determined by cyclic voltammetry, chronoamperometry and rotating ring disc electrode methods. The oxygen evolution was determined by a bicatalyst system using hemoglobin, and iron tetrakis (N-methyl-2-pyridyl)porphyrin as catalyst to detect the oxygen by electrocatalytic reduction. The electrocatalytic oxidations of adenine, guanine, H₂O₂, N₂H₄, NH₂OH, and l-cysteine by the film-modified electrode obtained from water-soluble nickel porphyrin were also investigated.     

A novel hydrogen peroxide sensor based on the redox of ferrocene on room temperature ionic liquid film

A novel sensor was constructed based on the catalytic activity of ferrocene (Fc) that was immobilized on a room temperature ionic liquids (RTILs), 1-ethyl-3-methyl imidazolium tetrafluoroborate ([EMIM][BF₄]), film. Electrochemical behavior of ferrocene was investigated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). A pair of stable, well-defined and quasi-reversible redox peak of ferrocene could be obtained at pH 7.0 phosphate buffer. Further investigations reveal that both anodic and cathodic peak currents of ferrocene vary linearly with the concentration of hydrogen peroxide (H₂O₂). Based on this, a new sensor for the measurement of H₂O₂ can be fabricated facilely. This sensor allowed us to measure H₂O₂ by polarizing the electrode under ether anodic or cathodic potential with an excellent stability and anti-interfering ability.     

A Simple Electrochemical Approach Based on Inexpensive Wall‐Jet Screen‐Printed Ring Disk Electrode to Evaluate Oxygen Reduction Catalysts

A simple electrochemical approach to evaluate oxygen reduction catalysts using an inexpensive screen‐printed ring disk carbon electrode system, consisting of a ring electrode deposited with MnO₂ and a disk electrode modified with the catalysts for study, is developed in this study. The as‐prepared MnO₂ is selective and sensitive for H₂O₂ oxidation in the presence of O₂ and is crucial to the proposed approach. By coupling with a wall‐jet electrochemical cell, the product generated from the reduction reaction at the disk electrode can effectively be monitored at the MnO₂‐deposited ring electrode. Model catalysts of nano‐Au and nano‐Pd representing 2e^? reduction of O₂ to H₂O₂ and 4e^? reduction to H₂O, respectively, were evaluated as electrode materials in oxygen reduction reaction to demonstrate the applicability of the proposed method.     

Enzyme-free amperometric sensing of hydrogen peroxide and glucose at a hierarchical Cu2O modified electrode

In this paper, an enzyme-free amperometric electrochemical sensor was fabricated by casting Nafion-impregnated Cu₂O particles onto a glassy carbon electrode. A dual dependence of peak current on sweeping rate, which can be attributed for the accumulation of reaction products, was observed on the sensor. Electrochemical analysis of the particulate Cu₂O for detecting H₂O₂ and glucose is described, showing remarkable sensitivity in both cases. The estimated detection limits and sensitivities for H₂O₂ (0.0039 μM, 52.3 mA mM⁻¹ cm⁻²) and glucose (47.2 μM, 0.19 mA mM⁻¹ cm⁻²) suggest that the response for H₂O₂ detection was much higher than for glucose detection. Electron microscopy observation suggested that the hierarchical structures of Cu₂O resulting from self-assembly of nanocrystals are responsible for the specific electrochemical properties.     

Picomolar Detection of Hydrogen Peroxide at Glassy Carbon Electrode Modified with NAD+ and Single Walled Carbon Nanotubes

Potential cycling was used for oxidation of NAD⁺ and producing an electroactive redox couple which strongly adsorbed on the electrode surface modified with single walled carbon nanotubes (SWCNTs). Modified electrode shows a pair of well defined and nearly reversible redox peaks at pH range 1–13 and the response showed a surface‐controlled electrode process. The surface coverage and heterogeneous electron transfer rate constant (k_s) of adsorbed redox couple onto CNTs films were about 6.32×10^?10 mol cm^?2 and 2.0 (±0.20) s^?1, respectively, indicating the high loading ability of CNTs toward the oxidation product of NAD⁺ (2,8‐dihydroxy adenine dinucleotide) and great facilitation of the electron transfer between redox couple and CNTs immobilized onto electrode surface. The modified electrode exhibited excellent electrocatalytic activity for H₂O₂ reduction at reduced overpotential. The catalytic rate constant for H₂O₂ reduction was found to be 2.22(±0.20)×10⁴ M^?1 s^?1. The catalytic reduction current allows the amperometric detection of H₂O₂ at an applied potential of ?0.25 V vs. Ag/AgCl with a detection limit of 10 pM and linear response up to 100 nM and resulting analytical sensitivity 747.6 nA/pM. The remarkably low detection limit (10 pM) is the lowest value ever reported for direct H₂O₂ determination on the electrodes at pH 7. The modified electrode can be used for monitoring H₂O₂ without the need for an enzyme or enzyme mimic. The proposed method for rapid amperometric detection of H₂O₂ is low cost and high throughput. Furthermore, the sensor can be used to any detection scheme that uses enzymatically generated H₂O₂ as a reactive product in biological systems.     

Electrochemical Monitoring of the Early Events of Hydrogen Peroxide Production by Mitochondria

Mitochondria consume oxygen in the respiratory chain and convert redox energy into ATP. As a side process, they produce reactive oxygen species (ROS), whose physiological activities are still not understood. However, current analytical methods cannot be used to monitor mitochondrial ROS quantitatively and unambiguously. We have developed electrochemical biosensors based on peroxidase‐redox polymer‐modified electrodes, providing selective detection of H₂O₂ with nanomolar sensitivity, linear response over five concentration decades, and fast response time. The release of H₂O₂ by mitochondria was then monitored under phosphorylating or inhibited respiration conditions. We report the detection of two concomitant regimes of H₂O₂ release: large fluxes (hundreds of nM ) under complex III inhibition, and bursts of a few nM immediately following mitochondria activation. These unprecedented bursts of H₂O₂ are assigned to the role of mitochondria as the hub of redox signaling in cells.     

The electrochemical activities of anthraquinone monosulfonate adsorbed on the basal plane of reduced graphene oxide by π–π stacking interaction

The electrochemical properties of anthraquinone monosulfonate (AQS) adsorbed on the basal plane of chemically-reduced graphene oxide (RGO) by π–π stacking interaction were investigated. The AQS/RGO nanocomposites were synthesized via a simple reduction–adsorption method and characterized with various techniques, and the surface concentration of AQS on the basal plane of RGO was estimated to be 1.72?×?10^?12 mol cm^?2. Electrochemical tests showed that the AQS/RGO nanocomposites accelerated the heterogeneous electron transfer, when ferro/ferricyanide was used as a redox probe, and RGO facilitated the electron transfer between AQS and the surface of glassy carbon electrode, producing a well-defined redox couple centered at ?0.490 V versus SCE at neutral medium. Compared with AQS and RGO modified glassy carbon (GC) electrode, the AQS/RGO nanocomposites showed better electrocatalytic activity towards oxygen reduction reaction. Rotating disk electrode data showed that the reduction of O₂ on AQS/RGO/GC electrode underwent a two-electron process to H₂O₂ at low overpotential and shifted to four-electron reduction to H₂O at relatively high overpotential. The present work demonstrates that AQS can be an efficient catalyst when noncovalently functionalized on the basal plane of RGO for electrochemical applications.     

Amperometric sensor for hydrogen peroxide based on direct electron transfer of spinach ferredoxin on Au electrode

A protein-based electrochemical sensor for hydrogen peroxide (H₂O₂) was developed by an easy and effective film fabrication method where spinach ferredoxin (Fdx) containing [2Fe–2S] metal center was cross linked with 11-mercaptoundecanoic acid (MUA) on a gold (Au) surface. The surface morphology of Fdx molecules on Au electrodes was investigated by atomic force microscopy (AFM). Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were employed to study the electrochemical behavior of adsorbed Fdx on Au. The interfacial properties of the modified electrode were evaluated in the presence of Fe(CN)₆^3?/4? redox couple as a probe. From CV, a pair of well-defined and quasi-reversible redox peaks of Fdx was obtained in 10 mM, pH 7.0 Tris–HCl buffer solution at ?170 and ?120 mV respectively. One electron reduction of the [2Fe-2S]²⁺ cluster occurs at one of the iron atoms to give the reduced [2Fe-2S]⁺. The formal reduction potential of Fdx ca. ?150 mV (vs. Ag/AgCl electrode) at pH 7.0. The electron-transfer rate constant, k_s, for electron transfer between the Au electrode and Fdx was estimated to be 0.12 s^?1. From the electrochemical experiments, it is observed that Fdx/MUA/Au promoted direct electron transfer between Fdx and electrode and it catalyzes the reduction of H₂O₂. The Fdx/MUA/Au electrode displays a linear increase in amperometric current for increasing concentration of H₂O₂.The sensor calibration plot was linear with r² = 0.998 with sensitivity approximately 68.24 μAm M^?1 cm^?2. Further, the effect of nitrite on the developed sensor was examined which does not interfere with the detection of H₂O₂. Finally, the addition of H₂O₂ on MUA/Au electrode was observed which has no effect on amperometric current.     

High loading MnO2 nanowires on graphene paper: Facile electrochemical synthesis and use as flexible electrode for tracking hydrogen peroxide secretion in live cells

Recent progress in flexible and lightweight electrochemical sensor systems requires the development of paper-like electrode materials. Here, we report a facile and green synthesis of a new type of MnO₂ nanowires–graphene nanohybrid paper by one-step electrochemical method. This strategy demonstrates a collection of unique features including the effective electrochemical reduction of graphene oxide (GO) paper and the high loading of MnO₂ nanowires on electrochemical reduced GO (ERGO) paper. When used as flexible electrode for nonenzymatic detection of hydrogen peroxide (H₂O₂), MnO₂–ERGO paper exhibits high electrocatalytic activity toward the redox of H₂O₂ as well as excellent stability, selectivity and reproducibility. The amperometric responses are linearly proportional to H₂O₂ concentration in the range 0.1–45.4 mM, with a detection limit of 10 μM (S/N = 3) and detection sensitivity of 59.0 μA cm⁻² mM⁻¹. These outstanding sensing performances enable the practical application of MnO₂–ERGO paper electrode for the real-time tracking H₂O₂ secretion by live cells macrophages. Therefore, the proposed graphene-based nanohybrid paper electrode with intrinsic flexibility, tailorable shapes and adjustable properties can contribute to the full realization of high-performance flexible electrode material used in point-of-care testing devices and portable instruments for in-vivo clinical diagnostics and on-site environmental monitoring.     

A novel polybenzimidazole-modified gold electrode for the analytical determination of hydrogen peroxide

The imine of polybenzimidazole (PBI) is chemically oxidized by hydrogen peroxide (H₂O₂) in the presence of acetic acid (AcOH). Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopies (XPS) showed that when the AcOH concentration remained constant, the degree of oxidation increased with increasing H₂O₂ levels. Moreover, the imine also exhibited electrochemical redox behavior. Based on these properties, a PBI-modified Au (PBI/Au) electrode was developed as an enzyme-free H₂O₂ sensor. At an applied potential of −0.5 V vs. Ag/AgCl, the current response of the PBI/Au electrode was linear with H₂O₂ concentration over a range from 0.075 to 1.5 mM, with a sensitivity of 55.0 μA mM⁻¹ cm⁻². The probe had excellent stability, with <5% variation from its initial response current after storage at 50 °C for 10 days. Potentially interfering species such as ascorbic or uric acid had no effect on sensitivity. Sensitivity improved dramatically when multiwalled carbon nanotubes (MWCNT) were incorporated in the probe. Under optimal conditions, the detection of H₂O₂ using a MWCNT-PBI/Au electrode was linear from 1.56 μM to 2.5 mM, with a sensitivity of 928.6 μA mM⁻¹ cm⁻². Analysis of H₂O₂ concentrations in urine samples using a MWCNT-PBI/Au electrode produced accurate real-time results comparable to those of traditional HPLC methods.     

Electrochemical detection of triacetone triperoxide employing the electrocatalytic reaction of iron(II/III)-ethylenediaminetetraacetate and hydrogen peroxide

An electrochemical method for the detection of triacetone triperoxide (TATP) is proposed and examined. In this method, TATP solutions were treated with 1.08 M HCl for 10 min releasing H₂O₂ and/or hydroperoxides. Subsequently, these peroxides undergo an electrocatalytic reduction through the Fe^II/IIIethylenediaminetetraacetate (EDTA) complex at a glassy carbon electrode. Cyclic voltammetric results indicate that no redox reaction was observed between Fe^IIEDTA and TATP. Acid treated TATP yielded voltammograms indicative of electrocatalysis of ROOH/HOOH reduction via Fe^II/IIIEDTA redox cycling. Chronoamperometric results yielded a detection limit of 0.89 μM for TATP and a sensitivity of 0.025 mA mM⁻¹. The influence of pH and O₂ interference on the analytical signal is briefly discussed.     

A Non‐Enzymatic Hydrogen Peroxide Sensor Based on Ag/MnOOH Nanocomposites

A novel non‐enzymatic sensor based on Ag/MnOOH nanocomposites was developed for the detection of hydrogen peroxide (H₂O₂). The H₂O₂ sensor was fabricated by immobilizing Ag/MnOOH nanocomposites on a glassy carbon electrode (GCE). The morphology and composition of the sensor surface were characterized using scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, transmission electron microscopy and X‐ray diffraction spectroscopy. The electrochemical investigation of the sensor indicates that it possesses an excellent electrocatalytic property for H₂O₂, and could detect H₂O₂ in a linear range from 5.0 µM to 12.8 mM with a detection limit of 1.5 µM at a signal‐to‐noise ratio of 3, a response time of 2 s and a sensitivity of 32.57 µA mM^?1 cm^?2. Additionally, the sensor exhibits good anti‐interference. The good analytical performance, low cost and straightforward preparation method made this novel electrode material promising for the development of effective non‐enzymatic H₂O₂ sensor.     

Solid-state electrochemical behavior of Keggin-type borotungstic acid single crystal

We demonstrate the electrochemical characteristics of the, poorly described in the literature, mixed-valence proton conducting solid borotungstic acid single crystal, H₅BW₁₂O₄₀ xH₂O, in the absence of liquid electrolyte phase. We performed electrochemical measurements in an all-solid cell with a gold fiber ultramicrodisk (diameter 10, 25, and 40 μm) working electrode, a silver semi-reference disk electrode, and a glassy carbon ring counter electrode. Diagnostic experiments at different scan rates aimed at probing the model of mass transport and potential kinetic limitations. Such bulk parameters as the effective diffusion coefficient of charge propagation and the concentration of mixed-valence redox centers were determined by two methods. The first method is based on the analysis of both Cottrellian and steady-state currents (the mixed-regimes method), and the second method provides the true diffusion coefficient (transport coefficient free of the migration influence) for both the substrate and the product of the electrode reaction. Together, these methods constitute a double potential step chronoamperometry experiment. The data obtained with these electrochemical experiments (effective diffusion coefficients, concentration of mixed-valence redox centers, etc.) can support the results obtained with other techniques (XRD, FTIR, and TGA).     

An amperometric biosensor using toluidine blue as an electron transfer mediator intercalated in α-zirconium phosphate-modified horseradish peroxidase immobilization matrix

A novel H₂O₂ biosensor was constructed employing α-zirconium phosphate as a new support substrate to hold an electron shuttle toluidine blue between a glassy carbon electrode and horseradish peroxidase. Toluidine blue was intercalated into α-zirconium phosphate-modified horseradish peroxidase immobilization matrix cross-linked on a glassy carbon electrode surface via bovine serum albumin-glutaraldehyde. This co-immobilization matrix of the mediator and the enzyme was formed from the α-zirconium phosphate (α-ZrP)-toluidine blue (TB) inclusion colloid in which horseradish peroxidase (HRP) was dissolved. Intercalation of TB in layered α-ZrP was investigated by scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and electrochemical measurements. TB immobilized in this way underwent a quasi-reversible electrochemical redox reaction at the electrode. Cyclic voltammetry and amperometric measurements demonstrated good stability and efficiently-shuttled electrons between HRP and the electrode. The sensor responded rapidly to H₂O₂ with a detection limit of 3.0 × 10^–7 mol/L.     

An Electrochemical Sensor Fabricated by Sonochemical Approach for Determination of the Antipsychotic Drug Haloperidol

A nanocomposite (Ho₂O₃NPs/BNT) was synthesized by decorating holmium(III)oxide nanoparticles (H₂O₃NPs) on bentonite (BNT) through a realizable sonochemical approach for the electrochemical detection of haloperidol (Hlp). A glassy carbon electrode was modified with this nanocomposite. The Ho₂O₃NPs/BNT modified electrode outperformed bare and other modified electrodes in terms of electrochemical performance for Hlp detection in a pH 8.0 phosphate buffer. The proposed electrochemical platform showed a wide linear range (0.01 μM–24 μM), low detection limit (2.4 nM), and high sensitivity by square wave voltammetry. In addition, the proposed electrochemical sensor met the clinical criteria in terms of stability, selectivity, and repeatability.     

Self‐Assembled Prussian Blue Nanoparticles Based Electrochemical Sensor for High Sensitive Determination of H2O2 in Acidic Media

In this paper, self‐assembled Prussian blue nanoparticles (PBNPs) on carbon ceramic electrode (CCE) were developed as a high sensitive hydrogen peroxide (H₂O₂) electrochemical sensor. The PBNPs film was prepared by a simple dipping method. The morphology of the PBNPs‐modified CCE was characterized by scanning electron microscopy (SEM). The self‐assembled PB film exhibited sufficient mechanical, electrochemical stability and high sensitivity in compare with other PB based H₂O₂ sensors. The sensor showed a good linear response for H₂O₂ over the concentration range 1 μM–0.26 mM with a detection limit of ca. 0.7 μM (S/N=3), and sensitivity of 754.6 mA M^?1 cm^?2. This work demonstrates the feasibility of self‐assembled PBNPs‐modified CCE for practical sensing applications.