Synthesis of hetero‐telechelic polymers by self‐polyaddition of monomers containing both oxetanyl and carboxyl groups

The synthesis and self‐polyaddition of new monomers, o‐, m‐, and p‐[(3‐ethyloxetane‐3‐yl)methoxyethyl]benzoic acid (o‐EOMB, m‐EOMB, and p‐EOMB) containing both oxetanyl groups and carboxyl groups were examined. The reactions of o‐EOMB, m‐EOMB, and p‐EOMB in the presence of tetraphenylphosphonium bromide as a catalyst in o‐dichlorobenzene at 150–170 °C resulted in self‐polyaddition to give the corresponding hetero‐telechelic polymers poly(o‐EOMB), poly(m‐EOMB), and poly(p‐EOMB) with M_ns = 14,500–33,400 in satisfactory yields. The M_n of poly(o‐EOMB) decreased at higher reaction temperatures than 150 °C, unlike those of poly(m‐EOMB) and poly(p‐EOMB), possibly due to inter‐ or intraester exchange side reactions. It was also found that the thermal properties and solubilities of these polymers were supposed with the proposed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7835–7842, 2008     

Photodissociation of Dibromobenzenes at 266 nm by the Velocity Imaging Technique

A velocity imaging technique combined with (2+1) resonance‐enhanced multiphoton ionization (REMPI) is used to detect the primary Br(²P_3/2) fragment in the photodissociation of o‐, m‐, and p‐dibromobenzene at 266 nm. The obtained translational energy distributions suggest that the Br fragments are produced via two dissociation channels. For o‐ and m‐dibromobenzene, the slow channel that yields an anisotropy parameter close to zero is proposed to stem from excitation of the lowest excited singlet (π,π*) state followed by predissociation along a repulsive triplet (n,σ*) state localized on the C? Br bond. The fast channel that gives rise to an anisotropy parameter of 0.53–0.73 is attributed to a bound triplet state with smaller dissociation barrier. For p‐dibromobenzene, the dissociation rates are reversed, because the barrier for the bound triplet state becomes higher than the singlet–triplet crossing energy. The fractions of translational energy release are determined to be 6–8 and 29–40 % for the slow and fast channels, respectively; the quantum yields are 0.2 and 0.8, and are insensitive to the position of the substituent. The Br fragmentation from bromobenzene and bromofluorobenzenes at the same photolyzing wavelength is also compared to understand the effect of the number of halogen atoms on the phenyl ring.     

A Flow Microreactor System Enables Organolithium Reactions without Protecting Alkoxycarbonyl Groups

A flow microreactor system consisting of micromixers and microtube reactors provides an effective tool for the generation and reactions of aryllithiums bearing an alkoxycarbonyl group at para‐, meta‐, and ortho‐positions. Alkyl p‐ and m‐lithiobenzoates were generated by the I/Li exchange reaction with PhLi. The Br/Li exchange reactions with sBuLi were unsuccessful. Subsequent reactions of the resulting aryllithiums with electrophiles gave the desired products in good yields. On the other hand, alkyl o‐lithiobenzoates were successfully generated by the Br/Li exchange reaction with sBuLi. Subsequent reactions with electrophiles gave the desired products in good yields.     

One‐Pot Synthesis of 3‐Substituted 3,4‐Dihydro‐1,2,3‐benzotriazine Derivatives Based on the Reaction of o‐Bromobenzyl Azides with Butyllithium

An efficient one‐pot procedure for the preparation of 3‐substituted 3,4‐dihydro‐1,2,3‐benzotriazines 2, 3 , and 4 from o‐bromobenzyl azides 1 is described. The reaction of these azides with BuLi in THF at ?78° generates o‐lithiobenzyl azides via the Br/Li exchange. These lithium compounds immediately undergo intramolecular cyclization to give the corresponding (dihydro‐1,2,3‐benzotriazinyl)lithium intermediates, which are trapped with a variety of acylating agents or BnBr at N(3) exclusively to provide the desired products in moderate to good yields.     

Synthesis and properties of new aromatic poly‐(ether benzoxazole)s from 2,2′‐bis(4‐amino‐3‐hydroxyphenoxy)biphenyl and aromatic dicarboxylic acid chlorides

A new bis(o‐aminophenol) with a crank and twisted noncoplanar structure and ether linkages, 2,2′‐bis(4‐amino‐3‐hydroxyphenoxy)biphenyl, was synthesized by the reaction of 2‐benzyloxy‐4‐fluoronitrobenzene with biphenyl‐2,2′‐diol, followed by reduction. Biphenyl‐2,2′‐diyl‐containing aromatic poly(ether benzoxazole)s with inherent viscosities of 0.52–1.01 dL/g were obtained by a conventional two‐step procedure involving the polycondensation of the bis(o‐aminophenol) monomer with various aromatic dicarboxylic acid chlorides, yielding precursor poly(ether o‐hydroxyamide)s, and subsequent thermal cyclodehydration. These new aromatic poly(ether benzoxazole)s were soluble in methanesulfonic acid, and some of them dissolved in m‐cresol. The aromatic poly(ether benzoxazole)s had glass‐transition temperatures of 190–251 °C and were stable up to 380 °C in nitrogen, with 10% weight losses being recorded above 520 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2656–2662, 2002     

Syntheses and properties of organosoluble polyamides and polyimides based on the diamine 3,3‐bis[4‐(4‐aminophenoxy)‐3‐methylphenyl]phthalide derived from o‐cresolphthalein

Diamine 3,3‐bis[4‐(4‐aminophenoxy)‐3‐methylphenyl]phthalide (BAMP) was derived from the o‐cresolphthalein, and then it was polycondensated with various aromatic dicarboxylic acids and dianhydrides to synthesize polyamides (PAs) and polyimides (PIs), respectively. PAs have inherent viscosities of 0.78–2.24 dL/g. Most of the PAs are readily soluble in a variety of solvents such as DMF, DMAc, and NMP and afforded transparent and tough films from DMAc solutions. The cast films have tensile strengths of 75–113 MPa as well as initial moduli of 1.71–2.97 GPa. These PAs have glass transition temperatures (T_gs) in the range of 242–325°C, 10% weight loss temperatures occur up to 473°C, and char yields are between 57 and 64% at 800°C in nitrogen. PIs were first synthesized to form polyamic acids (PAAs) by a two‐stage procedure that included a ring‐opening reaction, followed by thermal or chemical conversion to polyimides. Inherent viscosities of PAAs are between 0.71 and 1.63 dL/g. Most of the PIs obtained through the chemical cyclodehydration procedure are soluble in NMP, o‐chlorophenol, m‐cresol, etc., and they have inherent viscosities of 0.58–1.32 dL/g. T_gs of these PIs are in the range of 270–305°C and show 10% weight loss temperatures up to 477°C. PIs obtained through the thermal cyclodehydration procedure have tensile strengths of 72–142 MPa, elongations at break of 8–19%, and initial moduli of 1.80–2.72 GPa. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 455–464, 1999     

Rigid‐rod polyamides and polyimides prepared from 4,3″‐diamino‐2′,6′‐di(2‐naphthyl)‐p‐terphenyl and 2′,6′,3‴,5‴‐tetra(2‐naphthyl)‐4,4″‐diamino‐p‐quinquephenyl

A series of rigid‐rod polyamides and polyimides containing p‐terphenyl or p‐quinquephenyl moieties in backbone as well as naphthyl pendent groups were synthesized from two new aromatic diamines. The polymers were characterized by inherent viscosity, elemental analysis, FT‐IR, ¹H‐NMR, ¹³C‐NMR, X‐ray, differential scanning calorimetry (DSC), thermomechanical analysis (TMA), thermal gravimetric analysis (TGA), isothermal gravimetric analysis, and moisture absorption. All polymers were amorphous and displayed T_g values at 304–337°C. Polyamides dissolved upon heating in polar aprotic solvents containing LiCl as well as CCl₃COOH, whereas polyimides were partially soluble in these solvents. No weight loss was observed up to 377–422°C in N₂ and 355–397°C in air. The anaerobic char yields were 57–69% at 800°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 15–24, 1999     

Synthesis of Terphenyl Derivatives by Pd‐Catalyzed Suzuki‐Miyaura Reaction of Dibromobenzene Using 2N2O‐Salen as a Ligand in Aqueous Solution

A simple and efficient catalytic system for Na₂PdCl₄ catalyzing the Suzuki‐Miyaura reaction of dibromobenzene and arylboronic acid has been developed by using 2N2O‐salen as a ligand in H₂O/EtOH (V:V=4:1) at 100°C. Using this method, the reactions of substrates containing sterically demanding ortho substituents (e.g. dibromobenzene and/or arylboronic acids) proceeded efficiently, with the corresponding terphenyl derivatives being produced in moderate to excellent yields. Furthermore, this method offers interesting features for the multi‐gram scale synthesis of terphenyl compound.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Synthesis and characterization of novel fluorinated polyimides derived from 4,4′‐[2,2,2‐trifluoro‐1‐(3‐trifluoromethylphenyl)ethylidene]diphthalic anhydride and aromatic diamines

A novel fluorinated aromatic dianhydride, 4,4′‐[2,2,2‐trifluoro‐1‐(3‐trifluoromethyl‐phenyl)ethylidene]diphthalic anhydride (TFDA) was synthesized by coupling of 3′‐trifluoromethyl‐2,2,2‐trifluoroacetophenone with o‐xylene under the catalysis of trifluoromethanesulfonic acid, followed by oxidation of KMnO₄ and dehydration. A series of fluorinated aromatic polyimides derived from the novel fluorinated aromatic dianhydride TFDA with various aromatic diamines, such as p‐phenylenediamine (p‐PDA), 4,4′‐oxydianiline (ODA), 1,4‐bis(4‐aminophenoxy)benzene (p‐APB), 1,3‐bis(4‐amino‐phenoxy)benzene (m‐APB), 4‐(4‐aminophenoxy)‐3‐trifluoromethylphenylamine (3FODA) and 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzene (6FAPB), were prepared by polycondensation procedure. All the fluorinated polyimides were soluble in many polar organic solvents such as NMP, DMAc, DMF, and m‐cresol, as well as some of low boiling point organic solvents such as CHCl₃, THF, and acetone. Homogeneous and stable polyimide solutions with solid content as high as 35–40 wt % could be achieved, which were prepared by strong and flexible polyimide films or coatings. The polymer films have good thermal stability with the glass transition temperature of 232–322 °C, the temperature at 5% weight loss of 500–530 °C in nitrogen, and have outstanding mechanical properties with the tensile strengths of 80.5–133.2 MPa as well as elongations at breakage of 7.1–12.6%. It was also found that the polyimide films derived from TFDA and fluorinated aromatic diamines possess low dielectric constants of 2.75–3.02, a low dissipation factor in the range of 1.27–4.50 × 10^?3, and low moisture absorptions <1.3%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4143–4152, 2004     

Preparation of Functionalized Diaryl‐ and Diheteroaryllanthanum Reagents by Fast Halogen–Lanthanum Exchange

Aryl and heteroaryl halides (X=Br, I) undergo a fast and convenient halogen–lanthanum exchange with nBu₂LaMe, which leads to functionalized diaryl‐ and diheteroaryllanthanum derivatives. Subsequent trapping reactions with selected electrophiles, such as ketones, aldehydes, or amides, proceeded smoothly at −50 °C in THF, affording polyfunctionalized alcohols and carbonyl derivatives. Kinetic competition experiments revealed a similar reactivity trend as for Br/Mg exchange, but 10⁶‐times higher rates, making it comparable to Br/Li exchange.     

Superdrawing of polytetrafluoroethylene nascent powder by solid‐state coextrusion

A film of nascent powder of polytetrafluoroethylene (PTFE), compacted below the ambient melting temperature (T_m, 335 °C), was drawn by two‐stage draw techniques consisting of a first‐stage solid‐state coextrusion followed by a second‐stage solid‐state coextrusion or tensile draw. Although the ductility of extrudates was lost for the second‐stage tensile draw at temperatures above 150 °C due to the rapid decrease in strength, as previously reported, the ductility of extrudates increased with temperature even above 150 °C when the second‐stage draw was made by solid‐state coextrusion, reflecting the different deformation flow fields in a free space for the former and in an extrusion die for the latter. Thus, a powder film initially coextruded to a low extrusion draw ratio (EDR) of 6–20 at 325 °C was further drawn by coextrusion to EDRs up to ～?400 at 325–340 °C, near the T_m. Extremely high chain orientation (f_c = 0.998 ± 0.001), crystallinity (96.5 ± 0.5)%, and tensile modulus (115 ± 5 GPa at 24 °C, corresponding to 73% of the X‐ray crystal modulus) were achieved at high EDRs. Despite such a morphological perfection and a high modulus, the tensile strength of a superdrawn tape, 0.48 ± 0.03 GPa, was significantly low when compared with those (1.4–2.3 GPa) previously reported by tensile drawing above the T_m. Such a low strength of a superdrawn, high‐modulus PTFE tape was ascribed to the low intermolecular interaction of PTFE and the lack of intercrystalline links along the fiber axis, reflecting the initial chain‐extended morphology of the nascent powder combined with the fairly high chain mobility associated with the crystal/crystal transitions at around room temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3369–3377, 2006     

Branching by reactive end groups. III. Synthesis,branching, and analysis of m‐ethynylphenol/p‐t‐butylphenol‐coterminated bisphenol a polycarbonates

The use of m‐ethynylphenol (m‐EP) and p‐t‐butylphenol (PTBP) as coterminators for bisphenol A polycarbonates (BA PCs) provided long‐chain‐branched PCs, partially crosslinked PCs, or both after the thermal reaction of the terminal m‐EP groups, depending on the molar ratio of the chain terminators. Linear m‐EP/PTBP PCs were prepared by solution phosgenation of BA and the two coterminators. Differential scanning calorimetry showed the onset of the m‐EP‐end‐group reaction at about 250 °C by the appearance of a reaction exotherm. The enthalpy (ΔH) of this reaction was roughly proportional to the amount of m‐EP in the PC and to an extent could be used to monitor the progress of the reaction and estimate its kinetics. A complete m‐EP‐end‐group reaction was evident from gel permeation chromatography analysis upon heating under N₂ to 380 °C for 10 min or 360 °C for 60 min. The amount, if any, of gel formed after the m‐EP‐end‐group reaction depended on X_EP; those PCs with a X_EP value less than or equal to 0.33 had little or no gel. The maximum X_EP that precluded the formation of gels after branching was estimated to be about 0.45–0.48. The molecular weight of m‐EP/PTBP PCs increased after branching, as evidenced by gel permeation chromatography analysis. Assuming that the terminal m‐EP groups had a statistical distribution on the polymer chain ends and that they underwent only homopolymerization, the average reacted m‐EP‐group functionality according to estimated gel‐point composition was about 2.8–3.0. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2352–2358, 2000     

Polyimides based on 2,5‐bis(4‐aminophenoxy)biphenyl

A diamine monomer II , 2,5‐bis(4‐aminophenoxy)biphenyl, was prepared through a nucleophilic substitution reaction of phenylhydroquinone and p‐chloronitrobenzene in the presence of potassium carbonate in N,N‐dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C. A series of all‐aromatic, organosoluble polyimides bearing pendent phenyl groups were synthesized from the diamine with six kinds of commercial dianhydrides via a conventional two‐stage process. For improving solubility of polypyromellitimide, copolypyromellitimides with arbitrary solubilities were prepared from II and a pair of dianhydrides, which were mixed at certain molar ratios. These polymers showed good solubilities in N‐methyl‐2‐pyrrolidone and m‐cresol. The softening temperatures of these polyimides were recorded between 206 and 269 °C. Polymers had glass‐transition temperatures at 230–286 °C and 10% weight‐loss temperatures above 521 °C in air or nitrogen atmospheres. Their films had high tensile moduli and strengths. Excellent properties of these polyimides are attributed to the incorporation of the pendent phenyl group in diamine II . © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 429–438, 2002; DOI 10.1002/pola.10116     

Kinetic investigation of gas‐phase reactions between the OH‐radical and o‐, m‐, p‐ethyltoluene and n‐nonane in air

We have carried out relative rate experiments (T = 294 ± 2 K, atmospheric pressure) to investigate the OH‐oxidation of o‐, m‐, and p‐ethyltoluene and n‐nonane (k₁, k₂, k₃, and k₄ respectively). The experiments were performed in a 2‐m³ smog chamber with Teflon coated walls. The rate constants obtained are (in cm³ molecule^?1 s^?1 with two sigma uncertainties): k₁ = (1.36 ± 0.07) × 10^?11; k₂ = (2.12 ± 0.26) × 10^?11; k₃ = (1.47 ± 0.04) × 10^?11, and k₄ = (0.95 ± 0.02) × 10^?11. The measured rate constants are in accordance with previously published data, so that a coherent group of values for the compounds studied can be established. Atmospheric implications, ozone, and particle production are discussed. In addition, we have determined the amount of o‐, m‐, and p‐ethyltoluenes in different types of gasoline. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 367–378 2004     

Synthesis of novel 5‐aryl‐1H‐tetrazoles

In this study phenylselenocyanate and some of its derivatives (o‐Cl, p‐Cl, p‐Br, o‐NO₂, p‐NO₂, o‐CH₃, p‐CH₃, o‐COOH, p‐COOH, p‐OCH₃ substituted) were synthesized ( 3a–3j ). The synthesized compounds were converted to 5‐aryl‐1H‐tetrazole ( 4a–4j ), by Et₃N ċ HCl‐NaN₃ in toluene, which are a new series of phenylselanyl‐1H‐tetrazoles. The structure of all the presently synthesized compounds were confirmed using spectroscopic methods (FTIR, ¹H NMR, MS). © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:255–258, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20293     

Synthesis and asymmetric anionic polymerization of substituted 7‐aryl‐2,6‐dimethyl‐1,4‐benzoquinone methides

Substituted 7‐aryl‐2,6‐dimethyl‐1,4‐benzoquinone methides which have an electron‐donating methoxy substituent at the para‐position (p‐OMe, 2a ) or an electron‐withdrawing chloro one at the para‐ (p‐Cl, 2b ), meta‐ (m‐Cl, 2c ) , and ortho‐positions (o‐Cl, 2d ) of the benzene ring were synthesized, and their asymmetric anionic polymerizations using the complex of lithium 4‐isopropylphenoxide with (?)‐sparteine were carried out in toluene at 0 °C. The polymers with negative specific rotation were obtained for all of four monomers, and the polymer obtained from 2a showed smaller specific rotation value than that of polymer having no substituent (p‐H, 1 ) on the phenyl group and the polymers obtained from 2b–d showed larger ones. It was found that the kind of a substituent and its substitution position on the phenyl group affect significantly the optical activity of polymers. The largest specific rotation value of [α]₄₃₅= ?153.2° was obtained in the polymerization of 2d with an ortho‐chloro substituent. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 437–444     

The Role of Ate Complexes in the Lithium‐Sulfur,Lithium‐Selenium and Lithium‐Tellurium Exchange Reactions

Hypervalent ate complexes are presumptive intermediates in the metal‐halogen, metal‐tellurium, and related exchange reactions. The effect of o,o′‐biphenyldiyl vs. diphenyl substitution on formation of tellurium ate complexes was studied by a kinetic technique and by NMR spectroscopy. Only a modest increase in the association constant (K_ate) was measured. When Li/M exchanges of o,o′‐biphenyldiyl sulfides and selenides were made intramolecular by means of a m‐terphenyl framework ( 12‐S, 12‐Se, 21 ), enormous increases (>10⁹) in the rate of Li/S and Li/Se exchange were observed compared to acyclic models. Apparently, these systems are ideally preorganized to favor the T‐shaped geometry of the hypervalent intermediates. For the selenium systems, ate complex intermediates ( 20‐Se, 26 ) were detected spectroscopically in THF‐ or THF/HMPA‐containing solutions. A DNMR study showed that Li/Se exchange was substantially faster than exchange of the lithium reagents with the ate complex. Therefore, these ate complexes are not on the actual Li/Se exchange pathway.     

Synthesis and characterization of soluble polyimides derived from 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride

A novel bis(ether anhydride) monomer, 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide ion of 2′,5′‐dihydroxy‐p‐terphenyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and cyclodehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s bearing laterally attached p‐terphenyl groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal or chemical imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were in the range of 0.62–1.26 dL/g. Most of the poly(ether imide)s obtained from both routes were soluble in polar organic solvents, such as N,N‐dimethylacetamide. All the poly(ether imide)s could afford transparent, flexible, and strong films with high tensile strengths. The glass‐transition temperatures of these poly(ether imide)s were recorded as between 214 and 276 °C by DSC. The softening temperatures of all the poly(ether imide) films stayed in the 207–265 °C range according to thermomechanical analysis. For all the polymers significant decomposition did not occur below 500 °C in nitrogen or air atmosphere. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1008–1017, 2004     

Cerium‐catalyzed tandem synthesis of 2‐substituted benzothiazoles in PEG

An efficient and convenient condensation reaction of 2‐aminothiophenol with aldehydes catalyzed by a catalytic amount of ceric ammonium nitrate in polyethylene glycol was investigated. As a result, a set of diverse 2‐substituted benzothiazoles such as 2‐phenylbenzothiazole as well as its p‐Me, p‐NO₂, p‐F, p‐Cl, p‐Br, o‐OMe, p‐OMe and 2‐furyl, 2‐pyridyl and styryl derivatives were obtained in good to excellent yields for 5 h at room temperature. Additionally, the catalyst system was recovered and reused several times without evident loss in activity. Copyright © 2011 John Wiley & Sons, Ltd.