Preparation and Recognition Properties of Vanillin‐Imprinted Polymers

Some new molecularly imprinted polymers (MIPs) were prepared by different protocols involving vanillin as the imprinted molecule, methacrylic acid (= 2‐methylprop‐2‐enoic acid; MAA) as the functional monomer, and ethylene glycol dimethacrylate (EGDMA = 2‐methylprop‐2‐enoic acid ethane‐1,2‐diyl ester) as the cross‐linking agent. The adsorption property of the imprinted polymers was studied by UV spectrophotometry and HPLC. The results indicated that the porogen solvent had a certain influence on the adsorption performance of the polymer. The vanillin‐imprinted polymer MIP₁ prepared with MeOH as porogen, exhibited advantageous characteristics, i.e., a high binding activity, a good selectivity, and a rapid adsorption equilibrium. The binding parameters studied by Scatchard analysis established that there are two types of binding sites in MIP₁. Finally, by packing an SPE column (SPE = solid‐phase extraction) with the polymer MIP₁, the vanillin was separated and enriched successfully by this sorbent from the samples of Vanilla fragrans and beer.     

Molecularly imprinted polymers bearing spiropyran‐based photoresponsive binding sites capable of photo‐triggered switching for molecular recognition activity

Photoresponsive molecularly imprinted nanocavities were prepared using a newly designed functional monomer bearing a photoresponsive spiropyran moiety with a carboxy group that can interact with atrazine (the template molecule), in which the spiropyran moiety was incorporated into the binding cavities. Spectrophotometric analysis confirmed that the spiropyran moiety was photoresponsive even after polymerization. The selectivity of the EDMA‐based molecularly imprinted polymer (MIP_EDMA) was tested to examine the binding behavior of atrazine and other agrochemicals, revealing that the atrazine‐imprinted polymer can bind selectively to triazine herbicides. Photo‐triggered switching of the binding activity in MIP_EDMA was investigated, and the binding activity was found to decrease dramatically after UV light irradiation, suggesting that the spiropyran moiety in the binding cavities was transformed to the merocyanine form, resulting in unfavorable translocation of the carboxy group for atrazine binding. Consequently, the spiropyran‐based MIP_EDMA demonstrated in this study could open a way to realizing reliable photoresponsive smart materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1637–1644     

Novel adsorptive materials by adenosine 5ʹ‐triphosphate imprinted‐polymer over the surface of polystyrene nanospheres for selective separation of adenosine 5ʹ‐triphosphate biomarker from urine

In this study, we have developed a method to assess adenosine 5?‐triphosphate by adsorptive extraction using surface adenosine 5′‐triphosphate‐imprinted polymer over polystyrene nanoparticles (412 ± 16 nm) for selective recognition/separation from urine. Molecularly imprinted polymer was synthesized by emulsion copolymerization reaction using adenosine 5′‐triphosphate as a template, functional monomers (methacrylic acid, N‐isopropyl acrylamide, and dimethylamino ethylmethacrylate) and a crosslinker, methylenebisacrylamide. The binding capacities of imprinted and non‐imprinted polymers were measured using high‐performance liquid chromatography with UV detection with a detection limit of 1.6 ± 0.02 µM of adenosine 5′‐triphosphate in the urine. High binding affinity (Q_MIP, 42.65 µmol/g), and high selectivity and specificity to adenosine 5′‐triphosphate compared to other competitive nucleotides including adenosine 5?‐diphosphate, adenosine 5?‐monophosphate, and analogs such as adenosine, adenine, uridine, uric acid, and creatinine were observed. The imprinting efficiency of imprinted polymer is 2.11 for urine (Q_MIP, 100.3 µmol/g) and 2.51 for synthetic urine (Q_MIP, 48.5 µmol/g). The extraction protocol was successfully applied to the direct extraction of adenosine 5′‐triphosphate from spiked human urine indicating that this synthesized molecularly imprinted polymer allowed adenosine 5′‐triphosphate to be preconcentrated while simultaneously interfering compounds were removed from the matrix. These submicron imprinted polymers over nano polystyrene spheres have a potential in the pharmaceutical industries and clinical analysis applications.     

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d‐maltosyl‐β‐cyclodextrin

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin were synthesized using functionalized silica as a matrix, 4‐(phenyldiazenyl)phenol as a light‐sensitive monomer, and 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin as a template. Fourier transform infrared spectroscopy results indicated that 4‐(phenyldiazenyl)phenol was grafted onto the surface of functionalized silica. The obtained imprinted polymers exhibited specific recognition toward 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin. Equilibrium binding experiments showed that the photoirradiation surface molecularly imprinted polymers obtained the maximum adsorption amount of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin at 20.5 mg/g. In binding kinetic experiments, the adsorption reached saturation within 2 h with binding capacity of 72.8%. The experimental results showed that the adsorption capacity and selectivity of imprinted polymers were effective for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin, indicating that imprinted polymers could be used to isolate 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin from a conversion mixture containing β‐cyclodextrin and maltose. The results showed that the imprinted polymers prepared by this method were very promising for the selective separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin.     

Synthesis and application of vinylpyridine containing ion‐imprinted copolymer gel microbeads for Cu(II) solid‐phase extraction

The influence of polymer matrix on the extraction efficiency for Cu(II) and selectivity against metal ions such as Ni(II), Cd(II), Pb(II) of Cu(II) imprinted copolymer gels was described. The functional monomers investigated include the weakly basic 4‐vinylpyridine (4‐VP) and its mixure with the acidic and hydrogen binding methacrylic acid. Copolymer gels were prepared by dispersion cross‐linking copolymerization using Cu(II)–4‐(2‐pyridylazo)resorcinol complex, Cu(II), or 4‐(2‐pyridylazo)resorcinol as templates. The chemical structure and morphology of the Cu(II)‐imprinted microbeads are defined using elemental analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. Extraction efficiencies of newly synthesized sorbents were studied by batch procedure. The prepared copolymer gel with 4‐VP as monomer and Cu(II)–4‐(2‐pyridylazo)resorcinol complex has higher capacity and selectivity toward Cu(II) than the copolymer gels prepared using the mixture of methacrylic acid and 4‐VP. This new sorbent can be used as an effective SPE material for the highly selective preconcentration and separation of Cu(II) in sea water samples. It shows high mechanical and chemical stability.     

Employment of Molecularly Imprinted Polymers to High‐Throughput Screen nNOS‐PSD‐95 Interruptions: Structure and Dynamics Investigations on Monomer–Template Complexation

Molecularly imprinted polymers (MIPs) are employed to screen nNOS‐PSD‐95 (neuronal nitric oxide synthase post‐synaptic density protein‐95) interruptions. 5‐(3,5‐Dichloro‐2‐hydroxybenzylamino)‐2‐hydroxybenzoic acid (ZL006; a potential drug candidate for the treatment of stroke, depression, and pain) is employed as a template. Four kinds of functional monomers (2‐VP: 2‐vinylpyridine; 4‐VP: 4‐vinylpyridine; MMA: methyl methacrylate; and MAAM: methacrylamide) are designed, and their complexation with ZL006 in various solvents (methanol, acetonitrile, toluene, chloroform) is investigated by molecular dynamics simulations and quantum mechanics calculations. Both 4‐VP and MAAM have stronger interactions with ZL006 than those of 2‐VP and MMA. The appropriate ratio of monomer to template is 3:1. Intermolecular hydrogen bonds play a dominant role in monomer–template complexation. Ideal solvents are toluene and chloroform, and the solvation effect on monomer–template complexation is revealed. Both molecular modeling and adsorption experiments demonstrate that as‐synthesized ZL006‐MIP with 4‐VP as a monomer has better selectivity than that employing MAAM to screen for nNOS‐PSD‐95 interruptions.     

Molecularly Imprinted Polymers with Mandelic Acid as Template

In this report, molecularly imprinted polymers (MIPs) with racemic and L-mandelic acid as the templates were synthesized. Several structural analogues were chosen to study the selectivity of the MIPs prepared using 4-vinylpyridine (4-VP) as the monomer (MIP_4-VP). At the same time, the chromatographic behaviors of the MIP using acrylamide (AA) as the monomer (MIP_AA) in two different mobile phases, acetonitrile and hexane/ethyl acetate (1:1, v/v), were investigated and the separation of the enantiomers was tried. The results indicated that MIP_4-VP had great retention with a template comparable to other analogues. However, no difference in the k′ values of the enantiomers was observed, as the interaction between the polymer and the enantiomers was mainly dependent on the acidity, which showed no difference. The MIP_AA showed a more obvious imprinting effect for the template in hexane/ethyl acetate (1:1, v/v) than in acetonitrile. But the separation of the enantiomers was not achieved even in the less polar solvent, though there was an obvious difference between the retention time of L-MA and D-MA on the L-MA imprinted polymer.     

Development and application of molecularly imprinted polymers as solid-phase sorbents for erythromycin extraction

Six molecularly imprinted polymers (MIPs) of erythromycin (ERY) were prepared by noncovalent bulk polymerization using methacrylic acid (MAA) as the functional monomer. On the basis of binding analysis, the MIPs with 1:2 optimum ratio of template to MAA were selected for subsequent scanning electron microscopy and Brunauer–Emmett–Teller analyses, which indicated that the MIPs had more convergent porous structures than the nonimprinted polymers. The equilibrium binding experiments showed that the binding sites of MIPs were heterogeneous, with two dissociation constants of 0.005 and 0.63 mg mL⁻¹, respectively. Furthermore, the performance of the MIPs as solid-phase extraction (SPE) sorbents was evaluated, and the selectivity analysis showed that the MIPs could recognize ERY with moderate cross-reactivity for other macrolides. The overall investigation of molecularly imprinted SPE for cleanup and enrichment of the ERY in pig muscle and tap water confirmed the feasibility of utilizing the MIPs obtained as specific SPE sorbents for ERY extraction in real samples. Figure Schematic diagram of the preparation and application of the erythromycin imprinted molecularly imprinted polymers Suquan Song and Aibo Wu contributed equally to this work.     

Synthesis and characterization of pH sensitive poly(glycidol)‐b‐poly(4‐vinylpyridine) block copolymers

Block copolymers of poly(glycidol)‐b‐poly(4‐vinylpyridine) were obtained by ATRP of 4‐vinylpyridine initiated by ω‐(2‐chloropropionyl) poly(glycidol) macroinitiators. By changing the monomer/macroinitiator ratio in the synthesis polymers with varied P4VP/PGl molar ratio were obtained. The obtained block copolymers showed pH sensitive solubility. It was found that the linkage of a hydrophilic poly(glycidol) block to a P4VP influenced the pK_a value of P4VP. DLS measurements showed the formation of fully collapsed aggregates exceeding pH 4.7. Above this pH values the collapsed P4VP core of the aggregates was stabilized by a surrounding hydrophilic poly(glycidol) corona. The size of the aggregates depended significantly upon the composition of the block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1782–1794, 2009     

Macrocyclic Dinuclear Palladium Complex as a Novel Doubly Threaded [3]Rotaxane Scaffold and Its Application as a Rotaxane Cross‐Linker

A dinuclear Pd^II complex possessing a cyclic ligand was developed as a novel doubly threaded [3]rotaxane scaffold and applied as a rotaxane cross‐linker reagent. The dinuclear complex (PdMC)₂ was prepared by one‐step macrocyclization followed by the double palladation reaction. ¹H NMR analysis and UV/Vis measurements revealed the formation of a doubly threaded pseudo[3]rotaxane by the complexation of (PdMC)₂ with 2 equivalents of 2,6‐disubstituted pyridine 3 through double metal coordination. The treatment of (PdMC)₂ with 2 equivalents of 4‐vinylpyridine (VP) afforded a doubly threaded [3]rotaxane cross‐linker (PdMC‐VP)₂ . Radical co‐polymerization of VP and t‐butylstyrene in the presence of (PdMC‐VP)₂ afforded a stable rotaxane cross‐linked polymer (RCP). An elastic RCP was also prepared by using n‐butyl acrylate as a monomer. The obtained RCPs exhibited higher swelling ability and higher mechanical toughness compared with the corresponding covalent cross‐linked polymers.     

On the Synthesis and Selective Deprotection of Low‐Generation Dendrons with Orthogonally Protected Peripheral Amine Groups and a Possible Impact of the Deprotection Conditions on the Stability of Dendronized Polymers' Skeletons

The synthesis of first‐ and second‐generation dendrons with defined ratios of orthogonally protected amine groups in the periphery ((benzyloxy)carbonyl (Cbz) and (tert‐butoxy)carbonyl (Boc) protection) and the degree to which they can be selectively removed are described. The reaction conditions required for these deprotections were applied to methacrylic acid (= 2‐methylprop‐2‐enoic acid) based dendronized polymers carrying the same peripheral protecting groups to investigate whether they have any detrimental interference with the polymer skeleton. Specifically it was explored whether dendrons attached to the backbone could possibly be cleaved off as a whole (de‐dendronization). Finally it was investigated how de‐dendronizations can be used for quantifying both the dendron‐structure perfection and the polymer‐backbone configurations.     

Preparation of P4VP-g-PSt Copolymer Microspheres with Controllable Size by Atom Transfer Radical Polymerization Synthesized Poly(4-vinylpyridine) Macromonomer

Poly(4‐vinylpyridine) macromonomer (St‐P4VP) with a styryl end group was synthesized by atom transfer radical polymerization (ATRP) of 4‐vinylpyridine using p‐(chloromethyl)styrene (CMSt) as functional initiator, CuCl as catalyst and tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as ligand in 2‐propanol. The structure of St‐P4VP macromonomer was identified by proton nuclear magnetic resonance (¹H NMR). The result of gel permeation chromatography (GPC) illustrated that the number‐average molecular weight of St‐P4VP could be controlled by adjusting polymerization conditions. Poly(4‐vinylpyridine) grafted polystyrene microspheres (P4VP‐g‐PSt) were then prepared by dispersion copolymerization of styrene with St‐P4VP macromonomers. The effects of polymerization reaction parameters such as medium polarity, concentration of St‐P4VP macromonomer and polymerization temperature on the sizes and size distribution of P4VP‐g‐PSt microspheres were investigated. The results of transmission electron microscopy (TEM), scanning electron microscopy (SEM) and laser light scattering (LLS) indicated that mono‐dispersed P4VP‐g‐PSt microspheres with average diameters of 100–200 nm could be obtained when the molar ratio of St to St‐P4VP was 0.25:100 in ethanol/water mixed solvents (V/V=80:20) at 60°C. Such kind of graft copolymer microspheres was expected to be applied to many fields such as drug delivery system and protein adsorption/separation system due to their particular structure.     

Theoretical Elucidation of the Radical‐Scavenging‐Activity Difference of Hydroxycinnamic Acid Derivatives

To elucidate the nitrogen dioxide radical‐scavenging‐activity difference of three hydroxycinnamic acid derivatives (HCAs), i.e., caffeic acid (=3‐(3,4‐dihydroxyphenyl)prop‐2‐enoic acid; 1 ), ferulic acid (=3‐(4‐hydroxy‐3‐methoxyphenyl)prop‐2‐enoic acid; 2 ), and sinapic acid (=3‐(4‐hydroxy‐3,5‐dimethoxyphenyl)prop‐2‐enoic acid; 3 ), a combined density‐functional‐theory (DFT) method, labeled as B3LYP/6‐31G(d)//AM1, was employed to calculate adiabatic ionization potentials (IPs) for parent molecules and anions derived by proton dissociation. It was found that not the IPs of the parent HCAs but those of the anions account well for the experimentally observed higher activity of caffeic acid as compared to those of the other two HCAs, suggesting that the antioxidant anion should be taken into consideration in the selection or rational design of novel antioxidants; this, however, was neglected in previous studies.     

Structural isomer effects on the morphology of block copolymer/metal salts hybrids

The structural isomer effects on phase behavior of block copolymer/FeCl₃ hybrids were investigated by comparing structures of two series of blends based on polystyrene‐b‐poly(4‐vinylpyridine) (PS‐P4VP) and polystyrene‐b‐poly(2‐vinylpyridine) (PS‐P2VP), with the same molecular weight and the same composition. By conbining fourier transform infrared (FT‐IR) spectroscopy and differencial scaninng calorimetry, successful achievements of selective dispersion of FeCl₃ into poly(vinylpyridine) phase via coordination were verified. Complementary morphological observation by transmission electron microscopy and small‐angle X‐ray scattering (SAXS), it has been clarified that phase behavior for two isomer series is considerably different. That is, neat PS‐P4VP formed thicker cylindrical domains than that of neat PS‐P2VP due to much stronger Flory‐Huggins interaction parameter χ, χ_PS‐P4VP » χ_PS‐P2VP. As for PS‐P2VP/FeCl₃ hybrids, morphological transition can be taken place at the smaller amount of metal salt; furthermore, P2VP blend series form lamellar structures with evidently larger periodic length at the same amount of metal salt. This is probably caused by the event that excess metal salt also contributes to lamellar expansion by localizing at the center of P2VP lamellar phase. Moreover, the saturation limit of introduced metal salt in P2VP was smaller than that in P4VP due to the steric hindrance for a lone pair electrons on nitrogen atoms directed to the main chain of P2VP. These results can be explained by the structural isomer effects on the conformation of the P2VP chains at coordinated state with FeCl₃, that is, P2VP chains prefer to form the intramolecular coordination due to the short range interaction so as to make themselves stiffer, whereas P4VP chains tend to adopt the long range interaction including intra‐ and intermolecular coordinations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 377–386     

Synthesis and Applications of Silyl 2‐Methylprop‐2‐ene‐1‐sulfinates in Preparative Silylation and GC‐Derivatization Reactions of Polyols and Carbohydrates

Trimethylsilyl, triethylsilyl, tert‐butyldimethylsilyl, and triisopropylsilyl 2‐methylprop‐2‐ene‐1‐sulfinates were prepared through (CuOTf)₂?C₆H₆‐catalyzed sila‐ene reactions of the corresponding methallylsilanes with SO₂ at 50 °C. Sterically hindered, epimerizable, and base‐sensitive alcohols gave the corresponding silyl ethers in high yields and purities at room temperature and under neutral conditions. As the byproducts of the silylation reaction (SO₂+isobutylene) are volatile, the workup was simplified to solvent evaporation. The developed method can be employed for the chemo‐ and regioselective semiprotection of polyols and glycosides and for the silylation of unstable aldols. The high reactivity of the developed reagents is shown by the synthesis of sterically hindered per‐O‐tert‐butyldimethylsilyl‐α‐d ‐glucopyranose, the X‐ray crystallographic analysis of which is the first for a per‐O‐silylated hexopyranose. The per‐O‐silylation of polyols, hydroxy carboxylic acids, and carbohydrates with trimethylsilyl 2‐methylprop‐2‐ene‐1‐sulfinate was coupled with the GC analysis of nonvolatile polyhydroxy compounds both qualitatively and quantitatively.     

Preparation and Evaluation of Melamine Molecularly Imprinted Polymers by Thermal‐ and Photo‐initiation Methods

Melamine imprinted polymers (MIPs) have been prepared using identical polymer formulation by both thermal‐ and photo‐initiation method, respectively. Physical characterization of the polymers revealed that the different polymerization methods led to the slight differences in both polymer structures and performance by scanning electron microscope (SEM), infrared absorption (IR), and mercury analyzer (MA). Both MIPs were used as selective sorbents for the solid phase extraction (SPE) of melamine in milk powders, followed by the determination coupled to HPLC. The recoveries of melamine in spiked milk powders were obtained in the range of 92.4‐97.7% and 94.6‐99.7%, for both MIP_thermal and MIP_photo, respectively.     

Synthesis of miktoarm star amphiphilic block copolymers via combination of NMRP and ATRP and investigation on self‐assembly behaviors

The novel trifunctional initiator, 1‐(4‐methyleneoxy‐2,2,6,6‐tetramethylpip‐eridinoxyl)‐3,5‐bi(bromomethyl)‐2,4,6‐trimethylbenzene (TEMPO‐2Br), was successfully synthesized and used to prepare the miktoarm star amphiphilic poly(styrene)‐(poly(N‐isopropylacrylamide))₂ (PS(PNIPAAM)₂) via combination of atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMRP) techniques. Furthermore, the star amphiphilic block copolymer, poly (styrene)‐(poly(N‐isopropylacrylamide‐b‐4‐vinylpyridine))₂ (PS(PNIPAAM‐b‐P4VP)₂), was also prepared using PS(PNIPAAM)₂ as the macroinitiator and 4‐vinylpyridine as the second monomer by ATRP method. The obtained polymers were well‐defined with narrow molecular weight distributions (M_w/M_n ≤ 1.29). Meanwhile, the self‐assembly behaviors of the miktoarm amphiphilic block copolymers, PS(PNIPAAM)₂ and PS(PNIPAAM‐b‐P4VP)₂, were also investigated. Interestingly, the aggregate morphology changed from sphere‐shaped micelles (4.7 < pH < 3.0) to a mixture of spheres and rods (1.0 < pH < 3.0), and rod‐shaped nanorods formed when pH value was below 1.0. The LCST of PS(PNIPAAM)₂ (pH = 7) was about 31 °C and the LCST of PS(PNIPAAM‐b‐P4VP)₂ was about 35 °C (pH = 3). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6304–6315, 2009     

Preparation and application of a molecularly imprinted polymer for the determination of trace metolcarb in food matrices by high performance liquid chromatography

In this article, for the first time, a molecularly imprinted polymer (MIP) for the metolcarb was prepared by bulk polymerization using metolcarb as the template, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross‐linker. The prepared polymer was characterized by FT‐IR, static and kinetic adsorption experiments, and the results showed that it has been successfully synthesized and had good selective ability for metolcarb. The MIP was applied as a sorbent in molecularly imprinted SPE coupled with HPLC‐UV for separation and determination of trace metolcarb in three kinds of food matrices at three concentration levels. Under the optimal conditions, the LODs (S/N=3) of cabbage, cucumber and pear were 7.622, 6.455 and 13.52 μg/kg, respectively, and recoveries were in the range of 68.80–101.31% with RSD (n=3) below 3.78% in all cases. To demonstrate further the selectivity of the MIP obtained, a comparison with commercially available C₁₈ SPE was performed. The results indicated that molecularly imprinted SPE showed better chromatography, better selectivity and higher recoveries for metolcarb than commercially available C₁₈ SPE.     

Graftlike interpolymer complexes from poly(2‐vinylpyridine) and end‐sulfonic acid polystyrene and polyisoprene: Intermediates to noncovalently bonded block copolymer‐like micelles

The complexation between narrow molecular weight distribution poly(2‐vinylpyridine) (P2VP) and polystyrene (suPS) or polyisoprene (suPI) end‐functionalized with one sulfonic acid group was examined in tetrahydrofuran dilute solutions by a combination of static and dynamic laser light scattering. Both apparent weight‐average molecular weight (M_w,app) and hydrodynamic radius (R_h) of the complexes exhibited a maximum at a certain molar ratio of suPS chains to P2VP monomeric units. This indicated that the P2VP backbone may be saturated by the grafted end‐functionalized chains because of repulsion between the grafted chains. By changing the molar mass of P2VP from 100,000 to 30,000 g/mol, the values of M_w,app and R_h decreased. When suPI was used instead of suPS, similar trends were observed. In the latter case, it was possible to prepare block copolymer‐like micelles by transferring the P2VP/suPI blend solutions in decane, which is a selective solvent for PI. The non‐covalent‐bonded polymeric micelle characteristics were investigated as a function of sulfonic acid/2‐vinylpyridine units ratio as well as temperature. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2454–2461, 2003     

Unusual p‐Coumarates from the Stems of Vaccinium myrtillus

The two previously unreported esters 1 and 2 of pentane‐2,4‐diol and p‐coumaric acid (=3‐(4‐hydroxyphenyl)prop‐2‐enoic acid) along with 13 known compounds including 6 oleanane‐ and ursane‐type triterpenoids were isolated from MeOH extracts of the stems of Vaccinium myrtillus. The structures of the new compounds were assigned as (2S,4R)‐4‐(β‐D ‐glucopyranosyloxy)pentan‐2‐yl (2E)‐p‐coumarate ( 1 ) and its aglycone 2 on the basis of 1D‐ and 2D‐NMR spectroscopic analyses of the isolated and synthesized compounds and molecular modelling experiments. This is the first report on the occurrence of a chiral pentane‐2,4‐diol linker between the phenol‐derived acid and a glycoside part in natural products.