Growth of Gallium Orthophosphate Single Crystals under Hydrothermal Conditions

Gallium orthophosphate (GaPO₄) single crystals have been grown from phosphoric acid solutions under hydrothermal conditions. The crystals have been studied in terms of twinning because of the strong effect of this structural defect on the piezoelectric properties. The growth rates of individual faces have been compared to each other by considering the dipyramidal habit of the grown crystals.     

Investigation of single crystal growth of GaPO4 by the flux method

GaPO₄ crystals have been grown by a spontaneous nucleation method and the top-seeded solution growth method using three different solvents, 3MoO₃-Li₂O, 3MoO₃-K₂O and 2KPO₃-5MoO₃-3LiF. All of the as-grown crystals were characterized by means of X-ray powder diffraction. The results show that all the crystals were well crystallized and belong to the point group 32, and 2KPO₃-5MoO₃-3LiF flux is the best for nucleation and growth of transparent GaPO₄ crystals. The infrared spectrum of GaPO₄ single crystal obtained by the flux method shows that there is no incorporation of OH groups during the crystallization, which is beneficial for high temperature piezoelectric applications.     

Hydrothermal Liquid Phase Epitaxy of Gallium Orthophosphate on Quartz Crystal Substrates

Gallium orthophosphate (GaPO₄) layers for surface acoustic wave (SAW) and sensor applications have been grown on quartz crystal substrates with sizes of about 30 x 30 mm² by hydrothermal liquid phase epitaxy (HLPE). The growth of epitaxial GaPO₄ layers is difficult because of a strong tendency for twinning. Besides, a retrograde solubility and an intense chemical aggressiveness of the solution has to be considered. Nevertheless, we found an effective crystal growth technique to deal with these problems using large and qualitatively good substrate crystals of quartz. The most important step of the epitaxy is the formation of an interlayer between the quartz substrate and the GaPO₄ deposit. Epitaxial layers with thickness up to 500 μm were obtained and characterised by means of X‐ray techniques.     

Growth and Properties of Trigonal Aluminium Gallium Orthophosphate Single Crystals Al1-xGaxPO4

The new piezoelectric solid solution aluminium gallium orthophosphate single crystals have been successfully developed for the first time in our laboratory by hydrothermal method. It has been demonstrated that these crystals are homogeneous, and isomorphous with AIPO₄ and GaPO₄. The solid solution crystals Al_1-xGa_xPO₄ are easy to grown and have better optical quality than those of AlPO₄ crystals under the same conditions. A phase transition temperature T_α-β is 587 ± 3 °C for x = 0.12. Cell parameters, and elastic, piezoelectric, and dielectric constants are given.     

Microstructures on {111} faces of stannic iodide single crystals

Single crystals of stannic iodide (SnI₄) havebeen grown using the controlled reaction between SnCl₂ and KI by diffusion process in silica gel medium. Orange to reddish octahedral stannic iodide crystals up to 3–4 mm in size have been grown at room temperature. Optical studies have been made on the various surface structures of {111} faces of the asgrown crystals. On octahedral faces of these crystals, triangular-shaped hillocks with growth layers in the 〈110〉 directions have been observed. Occasionally, growth spirals on octahedral faces have also been reported. Close loops of growth fronts have been investigated and have been interpreted. It has been suggested that two-diemensional nucleation, spreading and pilling up of triangular growth layers is mainly responsible for the growth and occasionally the growth is due to screw dislocations. The implications are discussed.     

Growth Characteristics of Mercuric Iodide Single Crystal

The HgI₂ single crystal with few large smooth faces, high quality and 360 g in weight has been grown by a new technique of modified vapour phase located point method, and the growth characteristics of HgI₂ single crystals have been investigated in detail. It is found by means of X-ray diffraction that the crystals grown with the c-axis parallel or perpendicular to the pedestal plane have both the prism faces {110}.     

Studies of the Growth Habits of the AgGaSe2 Single Crystal

High quality AgGaSe₂ single crystals with 20 mm in diameter and 55 mm in length have been grown by the modified Bridgman technique and the growth habits of AgGaSe₂ single crystals have been investigated in detail. It is found that the shape of the growth ampoule affects greatly the nucleation and the growth of AgGaSe₂ single crystal. A new cleavage face (101) and the natural faces are observed in the as-grown crystals. For some cases, the growing direction is normal to the (316) face.     

Hydrothermal etching of flux grown phenakite (Be2SiO4) single crystals

The etching studies were made on flux grown phenakite (Be₂SiO₄) single crystals to elucidate the twinning phenomenon and the growth mechanism. The sharp and distinct etch pits and the twin boundaries were successfully obtained after the hydrothermal etching. From the etching and the X-ray precession experiments, it was conjectured that the phenakite had an inversion twin along the c axis. The twinning should be originated during the earlier stage of growth where the dendritic and acicular crystals were grown and thereafter the twinned crystals grew to the prismatic crystals during the latter stage with decreasing the temperature.     

Effect of Mn(II) ions on the growth of ammonium oxalate monohydrate crystals from aqueous solutions: I. Growth habit and surface morphology

The effect of concentration of Mn(II) ions on the growth habit and the surface micromorphology of different as‐grown faces of ammonium oxalate monohydrate (AO) single crystals grown from aqueous solutions was studied at a constant temperature of 30 °C and predefined supersaturations up to 20%. It was observed that the growth habit and the surface morphology of the crystals strongly depend on the supersaturation used for growth and the impurity concentration in the solution. The experimental results were analysed in terms of connected nets determined from different projections of the structure of AO crystals. Analysis of the observations revealed that: (1) the directions of connected nets corresponding to basic growth units composed of single (NH₄)₂C₂O₄ · H₂O molecules are in excellent agreement with the low‐index crystallographic directions of the orientations of growth layers, (2) all faces appearing in the growth morphology of AO crystals are F faces, and (3) the {001} face growing from pure aqueous solutions is essentially a kinetically rough face but the presence of Mn(II) impurity leads to their appearance in the morphology due to increase in the strength of bonds of the connected nets composing the surface graph.     

Growth of ytterbium tartrate trihydrate crystals in silica and agar‐agar gels and their characterization

Single crystals of ytterbium tartrate trihydrate have been grown by gel method using silica and agar‐agar gels as media of growth. The medium of growth influences the morphology of grown crystals, silica gel yielding single and polycrystalline in the form of spherulites whereas agar‐agar gel leading to growth of single and twinned crystals. Materials grown as single crystals have been characterized by using optical and scanning electron microscopy (SEM), EDAX, XRD, FT‐IR, CHN and thermogravimetric techniques. The stoichiometry of the grown single crystals is suggested to be Yb(C₄H₄O₆) (C₄H₅O₆).3H₂O. The FT‐IR spectrum shows the presence of singly as well as doubly ionized tartrate ligands. Results of thermal analysis indicate that the material is thermally stable up to a temperature of 200 °C. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Morphology of β-BaB2O4 (BBO) Crystals in Relation to its Structure and Growth Conditions

β-BaB₂O₄ (BBO) crystals with well-defined morphology have been grown from Na₂O solutions using the top seeded solution growth (TSSG) method. The crystal morphology in relation to its structure and growth conditions has been studied in detail on the basis of crystallography and crystal chemistry. It is found that the morphological characteristics are related to the orientations of structural unit (B₃O₆)^3— anion rings in the crystal. On the other hand, the growth parameters may greatly affect the appearance of faces of the crystal, but the crystals still generally take trigonal in outline and have a diagnostic character of point group 3m. The observed morphology is in disagreement with BFDH and PBC analyses and is explained from the incorporation of the growth units on the faces and facets. Since the incorporation rates of the growth units are different on different faces, the boule habits with well-defined morphology are formed.     

RbxK1-xTiOPO4 Thin Films Grown on KTiOPO4 Substrates by Liquid Phase Epitaxy

The properties of Rb_xK_1-xTiOPO₄ thin films grown on KTiOPO₄ substrates are reported. High quality films were obtained using the flux liquid phase epitaxy method, and optical waveguiding was observed in these epitaxial films. X-ray analysis shows that the epitaxial films are single crystals films. Their cell constants are different from those of the substrates. The epitaxy growth rate and other film properties were compared for films grown on different faces. Two different surface morphologies were observed for films grown on (100) faces. The morphologies on (201) and (201) faces were also different. The quality of films grown on the (201) face was better. The reason for a structure inversion for films grown on the z⁻ face is discussed.     

Growth aspects of barium oxalate monohydrate single crystals in gel medium

Single crystals of barium oxalate monohydrate (BaC₂O₄.H₂O, BOM) were grown in pure form by controlled diffusion of Ba²⁺ using the gel technique at different temperatures. Starting from aqueous Ba²⁺ chloride (BaCl₂) and acetic acid (C₂H₂O₄) in gel, this method offers a low‐cost and an easiest alternative to other preparation methods for the production of barium oxalate bulky single crystals. The optimal conditions for the growth of BOM crystals in silica gel were found by investigating different growth parameters such as gel pH, gel aging and crystallization temperature. Irrespective of all such crystallization environments, growth rate of the crystals were initially less and then exhibited supersaturation effect leading to non‐linearity. Gel aging and temperature has profound effect on nucleation density that resulted less number of crystals of maximum size in the gel matrix. Perfect single crystals were grown on gels of higher pH. The macropore morphology and porosity was controlled by changing age of the gel. It has been found that temperature has a fabulous effect in controlling the nucleation density by altering the supersaturation conditions for the formation of critical nuclei. The entire growth kinetics informed that the grown crystals were derived by the one dimensional diffusion controlled process. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth,Structural and Microtopographical Studies of Calcium Iodate,Monohydrate Crystals Grown in Silica Gel

Single crystals of calcium iodate, monohydrate [Ca(IO₃)₂, H₂O] have been grown by gel technique. Prismatic, prismatic pyramidal, needle shaped and hopper crystals were obtained. These crystals were also grown by doping impurities such as copper and iron. Kinetics of growth parameters was investigated. Structural analysis was carried out by using X‐ray powder diffraction method. Microtopographical study of the habit faces, such as prismatic and pyramidal, of as grown crystals was carried out. Some surface structures are reported. These crystals were etched by various etchants and appropriate etchant is reported.     

Specific features in shaping Bi<Subscript>12</Subscript>GeO<Subscript>20</Subscript> crystals grown by low thermal gradient Czochralski technique

Germanosillenite (BGO) crystals have been grown by the low thermal gradient Czochralski technique [1] at crystallization rates of v = 0.05–4 mm/h. The evolution regularities of the faceted front forms have been studied taking into consideration their growth conditions (crystallization rate and thermal conditions). The orientations of the faces forming the crystallization front during crystal growth in the 〈111〉 direction have been determined. The relationship between the front morphology (and, therefore, growth conditions) and the quality of crystals formed is established. The quality of the BGO crystals grown is evaluated by X-ray topography.     

Twinning Morphologies and Mechanisms of β-BaB2O4 (BBO) Crystal Grown by TSSG Method

The twinning morphology of β-BaB₂O₄ crystal grown by TSSG has been studied on the basis of crystallography. It was found that the faces R{101-2} and r{011-4} are often intergrown together by either r{011-4} intergrown in R{101-2} or in reverse, two individuals mostly take X(112-0) and occasionally take Y(011-0) as twin boundary; and that two individuals in the twin could take the same or opposite crystallographic polarity, this was identified by surface etched figures and the piezoelectric measurements. The formation of the twinned crystals are discussed from the crystallographic structural characteristics and the energetic considerations. The experimental factors such as crystal seed quality are suggested to reduce or eliminate the twin formation and to improve the crystal quality.     

Flux growth of La‐doped lead zirconate stannate titanate antiferroelectric crystals

Relaxor antiferroelectric single crystals lead lanthanum zirconate stannate titanate (PLZST) with the composition around the morphotropic phase boundary (MPB) have been grown by flux method using 50 wt% PbO‐PbF₂‐B₂O₃ as a flux. The obtained crystals are light yellow in color. The XRD patterns revealed that the habitual faces of the obtained crystal are (001). The crystal morphology was studied and related to a layer growth mechanism controlled by two‐dimensional growth. The chemical composition of as‐grown crystal was analyzed by inductively coupled plasma atomic emission spectrometry (ICP), indicating a slight decrease of the amount of Ti compared to the starting materials. The result was verified by the XRD patterns with the phase transformation from the co‐existence of tetragonal and rhombohedra phases to the single tetragonal phase. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal Growth,Thermal and Linear Optical Properties of LiGeBO4

The origin of reported twin domains of LiGeBO₄ was investigated by methods of thermal analysis. The twins were found to result from a phase transition which occurs 2‐3 K below the peritectic decomposition of the compound. Large single crystals of LiGeBO₄ were grown by an improved growth method using the top‐seeding technique. Linear optical properties (refractive indices between 404 nm and 2325 nm and unpolarized absorption spectrum) as a basis for nonlinear optical investigations were determined. Unfortunately, LiGeBO₄ is not phase matchable.     

Growth of bismuth tri‐iodide platelets by the physical vapor deposition method

The work reports the growth of single BI₃ crystals with platelets habit. Platelets were grown by physical vapor deposition (PVD) in a high vacuum atmosphere and with argon, polymer or iodine as additives. Crystals grew in the zone of maximum temperature gradient, perpendicular to the ampoule wall. Crystals grown with argon as additive show a very shining surface, have hexagonal (0 0 l) faces, sizes up to 20 x 10 mm² and thicknesses up to 100 μm. They were characterized by optical microscopy and scanning electron microscopy (SEM). Dendritic‐like structures were found to be their main surface defect. SEM indicates that they grow from the staking of hexagonal unities. Electrical properties of the crystals grown under different growth conditions were determined. Resistivities up to 2 x 10¹² Ωcm (the best reported value for monocrystals of this material) were obtained. X‐ray response was measured by irradiation of the platelets with a ²⁴¹Am source of 3.5 mR/h. A comparison of results according to the growth conditions was made. Properties of the crystals grown by this method are compared with the ones measured for others previously grown from the melt. Also, results for bismuth tri‐iodide platelets are compared with the ones obtained for mercuric and lead iodide platelets. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)