Fabrication of Honeycomb-Structured Poly(DL-lactide) and Poly[(DL-lactide)-co-glycolide)] Films and their Use as Scaffolds for Osteoblast-Like Cell Culture

Summary: Surfactant-free honeycomb-structured Poly(DL lactide) (PDL LA) and Poly-(DL lactide-co-glycolide) PDL LGA thin films were fabricated by water droplet templating methods. Thin films with uniform pore structure were obtained after controlled evaporation of solvents in a humid atmosphere. Solvent, polymer concentration and humidity were found to be important factors in the formation of honeycomb-structured thin films. Preliminary cell culture studies with MG-63 osteoblast-like cell lines showed promising degrees of cell attachment and proliferation on these films, suggesting that they are applicable as scaffolds for tissue engineering.     

Surface characterization of pre‐formed alginate fibres incorporated with a protein by a novel entrapment process

A novel physical entrapment process has been explored as an approach to surface incorporation of proteins within pre‐formed alginate fibres under mild conditions. Entrapment of the protein of choice was achieved by exposing the alginate fibres to a Na⁺‐rich NaCl/CaCl₂ mixture solution, which caused the formation of a moderate dissociation layer into which the protein could diffuse. Subsequent addition of a large excess of multi‐valent cations led to the collapse of the surface and entrapment of the protein within the surface. Bovine serum albumin (BSA) was used as a model protein to investigate the effect of process parameters on the entrapment efficiency. Scanning electron microscopy revealed that there was an increase in the surface roughness and a slight increase in the average diameter of the fibres after protein entrapment. The presence of the protein at the surface of alginates after the entrapment process was confirmed by means of confocal laser‐scanning microscopy, X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). The ion exchanges at the surface were evident, as detected by XPS and ToF‐SIMS. It was found that under fixed pre‐swelling conditions, the entrapment efficiency increased with increasing treatment time and, particularly, with protein concentration in the exposure solution. Copyright © 2005 John Wiley & Sons, Ltd.     

Tunable Engineered Extracellular Matrix Materials: Polyelectrolyte Multilayers Promote Improved Neural Cell Growth and Survival

Poly‐d ‐lysine (PDL) and poly‐l ‐lysine are standard surfaces for culturing neural cells; however, both are relatively unstable, costly, and the coated surface typically must be prepared immediately before use. Here, polyelectrolyte multilayers (PEMs) are employed as highly stable, relatively inexpensive, alternative substrates to support primary neural cell culture. Initial findings identify specific silk‐based PEMs that significantly outperform the capacity of PDL to promote neuronal survival and process extension. Based on these results, a library of PEM variants, including commercial and bio‐sourced polyelectrolytes, is generated and three silk‐based PEMs that substantially outperform PDL as a substrate for primary neurons in cell culture are identified. Further, testing these PEM variants as substrates for primary oligodendrocyte progenitors demonstrates that one silk‐based PEM functions significantly better than PDL. These findings reveal specificity of cellular responses, indicating that PEMs may be tuned to optimally support different neural cell types.     

Applicability of Alginate Film Entrapped Yeast for Microbial Fuel Cell

New strategies are proposed for modification of the anode of a Microbial Fuel Cell (MFC). Immobilization of yeast cells as electrogenic microorganism in MFC was reported using alginate. Yeast cells entrapment within alginate matrices was done through films deposited at the surface of a carbon felt electrode and the resulting anodes were characterized by chronoamperometry. Yeast entrapped within alginate films on carbon felt oxidized glucose and generates a current by direct and mediated electrons transfer from yeast cells to the carbon electrode. The result substantiated that immobilization of yeast for MFC could be a promising method to product green electricity.

     

Novel aliphatic poly(ester‐carbonate) with pendant allyl ester groups and its folic acid functionalization

A series of novel poly(ester‐carbonate)s bearing pendant allyl ester groups P(LA‐co‐MAC)s were prepared by ring‐opening copolymerization of L ‐lactide (LA) and 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC) with diethyl zinc (ZnEt₂) as initiator. NMR analysis investigated the microstructure of the copolymer. DSC results indicated that the copolymers displayed a single glass‐transition temperature (T_g), which was indicative of a random copolymer, and the T_g decreased with increasing carbonate content in the copolymer. Then NHS‐activated folic acid (FA) first reacted with 2‐aminoethanethiol to yield FA‐SH; grafting FA‐SH to P(LA‐co‐MAC) in the presence of TEA produced P(LA‐co‐MAC)/FA. The structure of P(LA‐co‐MAC)/FA and its precursor were confirmed by ¹H NMR and XPS analysis. Cell experiments showed that FA‐grafted P(LA‐co‐MAC) had improved adhesion and proliferation behavior of vero cells on the polymer films. Therefore, the novel FA‐grafted block copolymer is expected to find application in drug delivery or tissue engineering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1852–1861, 2008     

Two liquid adsorptive entrapment of a pluronic polymer into the surface of polyaniline films

Pluronic triblock copolymers were entrapped on the surface of polyaniline (PANI) films by first immersing the latter in N-methylpyrrolidinone (NMP) solutions of one of the Pluronics for a short time. This softened the surface of the films and allowed the Pluronic molecules to entangle with PANI segments of the swollen film on the surface. Further, the films were taken out from the NMP solution and dipped into water, which is a nonsolvent for PANI. The rapid surface deswelling of PANI by the water resulted in the entrapment of the Pluronic on its surface, with the hydrophilic blocks toward water and the hydrophobic block imbedded in the PANI films. The modified PANI obtained was examined by X-ray photoelectron spectroscopy, water droplets contact angles, scanning electron microscopy, and wide angle X-ray diffraction. The surface of the Pluronic entrapped PANI films became more hydrophilic than the hydrophobic PANI films and decreased the amount of bovine serum albumin protein adsorbed on them. This means that, by reducing the biofouling, the life of the modified polyaniline film can be extended when the latter is employed as a biosensor.     

Fabrication, Characterization, and Surface-Enhanced Raman Activity Study of Silver Coated Gold Nanoparticulate Films

This paper reports a study on the preparation of Ag-clad Au colloidal monolayer films by a combination of colloid self-assembly and liquid phase microwave high-pressure technique. Firstly, monodisperse Au nanoparticles prepared by microwave heating method were assembled onto a quartz slide. Then, these Au colloidal particles on the quartz surface acted as seeds for growing the Ag-clad Au composite particulate films. The obtained particulate films were characterized by UV-Vis spectra and atomic force microscopy. It was found that the thickness of the shell and thus the size of particles in the composite colloidal films could be controlled by deposition of Ag on the preformed Au colloidal particle film in the microwave reaction system, and such films significantly increased the surface-enhanced Raman scattering enhancement （SERS） ability compared with Au colloidal particle films. Their strong enhancement ability may mainly stem from relatively large particle consisting of Ag cladding as well as effective coupling among particles in the Ag-clad Au particle ftlms.     

Galvanostatic Entrapment of Sulfite Oxidase into Ultrathin Polypyrrole Films for Improved Amperometric Biosensing of Sulfite

The entrapment of sulfite oxidase (SOx) into ultrathin polypyrrole (PPy) films of 27–135 nm thickness has been successfully used for amperometric biosensing of sulfite with considerably improved performance. Optimum galvanostatic entrapment was accomplished in an electrolyte‐free solution which contained 0.1 M pyrrole and 5 U/mL of SOx with a polymerization period of 120 seconds and an applied current density of 0.2 mA cm^?2. Evidence of the incorporation and retention of SOx in the ultrathin PPy film was obtained by scanning electron microscopy, cyclic voltammetry and amperometric measurements. Entrapment of the enzyme in a 54 nm thick PPy‐SOx film gave optimum amperometric response for sulfite and enabled the detection of as little as 0.9 μM of sulfite with a linear concentration range of 0.9 to 400 μM. The successful application of the biosensor to the determination of sulfite in beer and wine samples is reported. Comparison with a spectrophotometric method indicates that the biosensor was more superior for the determination of sulfite in red wine.     

Evaporation‐Induced Ordered Honeycomb Structures of Gold Nanoparticles at the Air/Water Interface

The breath figure method was used to prepare dodecanethiol‐capped gold nanoparticle macroporous structures with pore diameters from 1.7 to 3.5 μm on an air/water interface. A two‐step procedure is proposed for the fabrication of these macroporous structures, by forming a surfactant monolayer on water, and drop‐casting a gold nanoparticle dispersion in chloroform onto the surfactant monolayer. The self‐assembled films are easily transferred from the water surface onto different substrates and were characterized by TEM, SEM, and AFM. Ordered honeycomb structures with different pore arrays (perforated monolayer films, hexagonal networks and alveoli‐like porous films) were obtained. The change in morphology is concentration dependent, and deformed structures with elliptic honeycomb networks are also observed. In addition, honeycomb films using gold nanoparticles stabilized by a weakly bound ligand (dioctadecyldimethylammonium chloride) were formed by the same technique. These films have potential as substrates for surface‐enhanced Raman spectroscopy.     

Synthesis and characterization of amphiphilic block copolymers with allyl side‐groups

The synthesis of a new cyclic carbonate monomer containing an allyl group was reported and its biodegradable amphiphilic block copolymer, poly(ethylene glycol)‐block‐poly(L ‐lactide‐co‐5‐methyl‐5‐allyloxycarbonyl‐propylene carbonate) [PEG‐b‐P(LA‐co‐MAC)] was synthesized by ring‐opening polymerization (ROP) of L ‐lactide (LA) and 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC) in the presence of poly (ethylene glycol) as a macroinitiator, with diethyl zinc as a catalyst. ¹³C NMR and ¹H NMR were used for microstructure identification of the copolymers. The copolymer could form micelles in aqueous solution. The core of the micelles is built of the hydrophobic P(LA‐co‐MAC) chains, whereas the shell is set up by the hydrophilic PEG blocks. The micelles exhibited a homogeneous spherical morphology and unimodal size distribution. By using the cyclic carbonate monomer containing allyl side‐groups, crosslinking of the PEG‐b‐P(LA‐co‐MAC) inner core was possible. The adhesion and spreading of ECV‐304 cells on the copolymer were better than that on PLA films. Therefore, this biodegradable amphiphilic block copolymer is expected to be used as a biomaterial for drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5518–5528, 2007     

Matrix Effects on Selective Chemical Sensing by Sol-Gel Entrapped Complexing Agents

Changes in the selectivity of molecular recognition systems on sol-gel entrapment are reported. Thermodynamic effects are exemplified by studies of the metal-ion complexing agent Eriochrome Cyanine R (ECR). In aqueous solution this binds strongly and selectively to Al3+, whereas in a TMOS-based sol-gel matrix it is selective for Cu3+. Thermodynamic effects, due to restricted translational freedom of water molecules or different solvent structure and isolation of ligands, can explain these observations. Effects of entrapment on molecular recognition by a large conformationally flexible molecule have been studied using a tris-terminated PAMAM dendrimer. The dendrimer conformation and its complexation with Cu2+ changes on entrapment, and binding of aromatic carboxylic acids such as ibuprofen can be detected by changes in visible absorption and surface plasmon resonance using spun films of the sol-gel composite. These effects show that in addition to providing a porous entrapment matrix of good optical quality, sol-gels may be used to alter the binding characteristics of the entrapped receptors.     

Controlled surface‐initiated ring‐opening polymerization of L‐lactide from risedronate‐anchored hydroxyapatite nanocrystals: Novel synthesis of biodegradable hydroxyapatite/poly(L‐lactide) nanocomposites

Risedronate‐anchored hydroxyapatite (HA‐RIS) nanocrystals were prepared with 4.1 wt % RIS and used for controlled surface‐initiated ring‐opening polymerization (ROP) of L ‐lactide (L ‐LA). The strong adsorption of RIS to HA surface not only led to enhanced dispersion of HA nanocrystals in water as well as in organic solvents but also provided alkanol groups as active initiating species for ROP of L ‐LA. HA‐RIS was characterized by thermogravimetric analysis, dynamic light scattering, ¹H NMR, Fourier transform infrared spectrometer, and X‐ray diffraction. The graft polymerization of L ‐LA onto HA‐RIS took place smoothly in the presence of stannous octoate in toluene at 120 °C, resulting in HA/poly(L ‐LA) nanocomposites with high yields of 85–90% and high poly(L ‐LA) contents of up to 97.5 wt %. Notably, differential scanning calorimetry measurements revealed that the poly(L ‐LA) in HA/poly(L ‐LA) nanocomposites exhibited considerably higher melting temperatures (T_m = 173.3?178.1 °C) and higher degrees of crystallinity (X_c = 41.0?43.1%) as compared to poly(L ‐LA) homopolymer (T_m = 168.5 °C, X_c =25.7%). In addition, our initial results showed that these HA/poly(L ‐LA) nanocomposites could readily be electrospun into porous matrices. This study presented a novel and controlled synthetic strategy to HA/RIS/poly(L ‐LA) nanocomposites that are promising for orthopedic applications as well as for bone tissue engineering. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Micro/macrotribological properties of several nano‐scale ionic liquid films on modified silicon wafers

Three kinds of alkylimidazolium base room temperature ionic liquids (RTILs) were synthesized and their nano‐scale lubricant films were prepared on modified silicon wafers by dip‐coating method. The thicknesses of these films were measured and their relationship between thickness and solution concentration was obtained. Their surface morphologies were observed and contact angles of water on these films were determined. The adhesions and friction coefficients of these films were detected by contact mode AFM. As comparison, their macrotribological properties were evaluated on a UMT‐2MT tribo‐tester. It was found that, in microscale, 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate performed the best tribological properties, while in macroscale, its tribological properties were similar with that of 1‐hexyl‐3‐methyl‐imidazolium tetrafluoroborate and better than that of 1‐hexyl‐3‐methyl‐imidazolium adipate. Copyright © 2009 John Wiley & Sons, Ltd.     

Near‐field laser ablation inductively coupled plasma mass spectrometry: a novel elemental analytical technique at the nanometer scale

An analytical technique utilizing a near‐field effect (to enhance the incident light energy on the thin tip of an Ag needle) in a laser ablation inductively coupled plasma mass spectrometry (NF‐LA‐ICP‐MS) procedure was developed. To produce the thin needles with a tip diameter in the hundreds of nm range a robust needle etching procedure was established. The ‘sample‐to‐tip’ distance was controlled via the measurement of a tunnel current between the needle and sample surface. The NF‐LA‐ICP‐MS technique thus developed was applied for the analysis of copper isotopic standard reference material NIST SRM 976 and tungsten‐molybdenum alloy NIST SRM 480 in the nm resolution range. The observed craters ranged from 200 nm to about 2 µm in diameter and were dependent on the needle used as well as on the ‘sample‐to‐tip’ distance. The mass spectrometric measurements of ⁶³Cu⁺ ion intensity on NIST SRM 976 showed that using near‐field enhancement in laser ablation allowed a roughly 6‐fold increase in the ion intensity of the analyte when the needle was about 100 nm (and below) from the surface, in contrast to when it was far away (e.g. 10 µm) from the sample. The relative standard deviation (RSD) of the ⁶⁵Cu⁺/⁶³Cu⁺ isotopic ratio measurements by NF‐LA‐ICP‐MS was 3.9% (n = 9). The detection efficiencies obtained for the compared LA‐ICP‐MS and NF‐LA‐ICP‐MS methods were found to be 4.6 * 10^?3 counts per second (cps)/ablated atom and 2.7 * 10^?5 cps/ablated atom, respectively. Copyright © 2008 John Wiley & Sons, Ltd.     

Electrodeposition of Dye-Doped Titania Thin Films

We extend our novel low-voltage electrochemical method for oxide thin film formation from sol-gel monomers to include entrapment of organic molecules within the films. We also describe an extension of the method to titania thin films, which are obtained from titanium tetra-n-propoxide in alcoholic solutions by applying potentials in the range of +2.0 to ?1.4 V to indium tin oxide electrodes. The film thickness (ranging between 20–1000 nm) is controllable by changing either the potential or the duration of its application. We demonstrate that this electrochemical method provides a convenient way for entrapment of organic dopants within the film. Four dyes were used for that purpose: Basic Blue 41, methylene-blue, tris(2,2′-bipyridine)iron(II) and tris(2,2′-bipyridine)ruthenium(II).     

Self‐Organization of Honeycomb‐like Porous TiO2 Films by means of the Breath‐Figure Method for Surface Modification of Titanium Implants

This study describes a facile breath‐figure method for the preparation of honeycomb‐like porous TiO₂ films with an organometallic small‐molecule precursor. Multiple characterization techniques have been used to investigate the porous films and a mechanism for the formation process of porous TiO₂ films through the breath‐figure method is proposed. The pore size of the TiO₂ films could be modulated by varying the experimental parameters, such as the concentration of titanium n‐butoxide (TBT) solution, the content of cosolvent, and the air flow rate. In vitro cell‐culture experiments indicate that NIH 3T3 fibroblast cells seeded on the honeycomb‐like porous TiO₂ films show good adhesion, spreading, and proliferation behaviors, which suggests that honeycomb‐like porous TiO₂ films are an attractive biomaterial for surface modification of titanium and its alloys implants in tissue engineering to enhance their biocompatibility and bioactivity.     

Preparation and characterization of redox cellulose Langmuir–Blodgett films containing a ferrocene derivative

The 3‐ferrocenoylpropanoyl group, one of the redox species, was introduced at C‐2 and/or C‐3 positions of 6‐O‐(4‐stearyloxytrityl)cellulose. The spreading behavior of the cellulose derivatives on the water surface and the properties of Langmuir–Blodgett (LB) films were investigated. The surface pressure–area isotherm of the cellulose monolayer was changed by the subphase temperature. Uniform monolayers of 6‐O‐(4‐stearyloxytrityl)cellulose 3‐ferrocene propionate (STCFc) could be deposited successively onto several substrates by the horizontal lifting method at 10 mN m^?1, and this produced X‐type LB films. The successive uniform depositions of STCFc were confirmed by ultraviolet–visible absorption spectra. X‐ray diffraction measurements indicated that the thickness of the STCFc molecules in the LB films was 1.99 nm. Fourier transform infrared spectroscopy measurements supported the idea that hydrocarbon chains in the LB films were highly ordered (trans‐zigzag) and oriented considerably perpendicular to the surface of the substrate. Moreover, the C?O group of the ferrocenoyl groups was perpendicular to the surface of the substrate, and the ferrocene group was occupied in the water phase. Cyclic voltammograms for the STCFc monolayer on a gold electrode exhibited surface waves. The interfacial electron‐transfer process between the redox site incorporated into the cellulose LB monolayer and the electrode surface was fast enough at a scanning rate lower than 100 mV s^?1. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5023–5031, 2005     

Physical characterization of poly(ω‐pentadecalactone) synthesized by lipase‐catalyzed ring‐opening polymerization

The Candida antarctica lipase B (Novozyme‐435)‐catalyzed ring‐opening polymerization of ω‐pentadecalactone in toluene was performed. Poly(ω‐pentadecalactone) [poly(PDL)] was obtained in a 93% isolated yield in 4 h with a number‐average molecular weight of 64.5 × 10³ g/mol and a polydispersity index of 2.0. The solid‐state properties of poly(PDL) were investigated by thermogravimetric analysis (TGA) coupled with mass spectrometry, differential scanning calorimetry (DSC), stress–strain measurements, wide‐angle X‐ray diffraction, and dynamic mechanical and dielectric spectroscopies. Poly(PDL) is a crystalline polymer that melts around 100 °C. The polyester shows good thermal stability, with a main TGA weight loss centered at 425 °C. Because of the high degree of poly(PDL) crystallinity, the glass transition (?27 °C) is revealed by relaxation techniques such as dynamic mechanical and dielectric spectroscopies, rather than by DSC. In addition to the glass transition, the viscoelastic spectrum of poly(PDL) also shows two low‐temperature secondary relaxations centered at ?130 (γ) and ?90 °C (β). They are attributed to local motions of the long methylene sequence (γ) and complex units involving water associated with the ester groups (β). The mechanical properties of poly(PDL) are typical of a hard, tough material, with an elastic modulus and yield parameters comparable to those of low‐density polyethylene. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1721–1729, 2001     

Tailored Synthesis of Octopus‐type Janus Nanoparticles for Synergistic Actively‐Targeted and Chemo‐Photothermal Therapy

A facile, reproducible, and scalable method was explored to construct uniform Au@poly(acrylic acid) (PAA) Janus nanoparticles (JNPs). The as‐prepared JNPs were used as templates to preferentially grow a mesoporous silica (mSiO₂) shell and Au branches separately modified with methoxy‐poly(ethylene glycol)‐thiol (PEG) to improve their stability, and lactobionic acid (LA) for tumor‐specific targeting. The obtained octopus‐type PEG‐Au‐PAA/mSiO₂‐LA Janus NPs (PEG‐OJNP‐LA) possess pH and NIR dual‐responsive release properties. Moreover, DOX‐loaded PEG‐OJNP‐LA, upon 808 nm NIR light irradiation, exhibit obviously higher toxicity at the cellular and animal levels compared with chemotherapy or photothermal therapy alone, indicating the PEG‐OJNP‐LA could be utilized as a multifunctional nanoplatform for in vitro and in vivo actively‐targeted and chemo‐photothermal cancer therapy.