Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Enzyme‐Catalyzed Preparation of Aliphatic Polyesters Containing Thioester Linkages

Aliphatic polyesters containing thioester linkages were enzymatically prepared by both the copolymerization of lactone with mercaptoalkanoic acid and by the transesterification of polyesters with mercaptoalkanoic acids. The enzymatic copolymerization of ε‐caprolactone with 11‐mercaptoundecanoic acid (11MU) and 3‐mercaptopropionic acid (3MP) was performed under reduced pressure using an immobilized lipase from Candida antarctica (CA). The transesterification of poly(ε‐caprolactone) and poly[(R)‐3‐hydroxybutyrate] was carried out with 11MU and 3MP using lipase CA under reduced pressure.

     

One‐Pot Fabrication of Supramolecular Polymer Particles via Situ Polymerization Stringed Assembly of a Two‐Monomer Microemulsion

Summary: A novel method, situ polymerization stringed assembly (SPSA), is proposed to prepare stable solid or hollow supramolecular polymer particles, which are assembled by numerous nanoparticles. By this method, the fabrication of primary nanoparticles (poly(methyl methacrylate), PMMA), the linkers (polyvinylpyrrolidone, PVP, chains) between the nanoparticles, and the final assembled solid or hollow particles could be achieved in just one‐pot by methyl methacrylate (MMA)/N‐vinylpyrrolidone (NVP) microemulsion polymerization under UV irradiation. The structures of the supramolecular particles can be changed from solid to hollow by tuning the mass ratio of MMA/NVP in the microemulsion. AFM, TEM, and SEM experiments are performed to identify the results.

AFM image of the PMMA/PVP solid particles obtained from the photopolymerization of the microemulsion containing 20 wt.‐% MMA, 10 wt.‐% NVP, and 5 × 10⁻² wt.‐% BP.     

Crystallization of Poly(ε‐caprolactone)/Poly(vinyl chloride) Miscible Blends Under Strain: The Role of Molecular Weight

Summary: The effect of poly(ε‐caprolactone) (PCL) molecular weight on the orientation of crystalline PCL in miscible poly(ε‐caprolactone)/poly(vinyl chloride) (PCL/PVC) blends, melt crystallized under strain, has been studied by a combination of wide angle X‐ray diffraction (WAXD) and small angle X‐ray scattering (SAXS) studies. An unusual crystal orientation with the b‐axis parallel to the stretching direction was observed in miscible PCL/PVC blends with PCL of high molecular weight (>21 000). SAXS showed the presence of nanosize confined PCL in the PCL/PVC blends, which could be preserved at temperatures higher than the T_m of PCL but lower than the T_g of PVC. A mechanism based on the confinement of PCL crystal growth was proposed, which can explain the formation of b‐axis orientation in PCL/PVC blends crystallized under strain.

SAXS pattern of stretched PCL/PVC blend after annealing at 90 °C for 5 min.     

The Energetics of Large Deformations of a Single Polyimide Molecular Chain: DFT and MO Calculations

The large‐deformation energetics of a single molecular chain of the rod‐like polyimide PMDA‐PDA was investigated using DFT, ab initio MO and semi‐empirical MO methods. The force/displacement curves were calculated from tensile testing simulations along the axis of the molecular chain, allowing a discussion of the distribution and change of local strain of the molecular chain. The deformation behavior of a single PMDA‐PDA molecular chain under finite deformations as functions of bending angle and dihedral angle between PMDA and PDA groups are compared. It is found that the semi‐empirical MO calculations provide sufficient accuracy to express the energetics of large deformations except for compressive deformation.

     

Discriminating Among Co‐monomer Sequence Distributions in Random Copolymers Using Interaction Chromatography

Interaction chromatography has been employed to validate that adsorption of poly[styrene‐co‐(4‐bromostyrene)] (PBr_xS) random copolymers, where x denotes the mole fraction of 4‐bromostyrene (4–BrS) in PBr_xS in solution depends on the average number of adsorptive segments, the type of adsorbing substrate, and on the co‐monomer sequence distribution in PBr_xS.

     

Directed Crystallisation of Synthetic Polymers by Low‐Molar‐Mass Self‐Assembled Templates

A novel and powerful method of microstructure control in polyolefins is presented. By dispersing tiny amounts of sorbitol derivatives in the polymer, the subsequent crystal growth can be controlled with modest prior flow‐fields; in particular high levels of preferred orientation are generated in the resultant crystals. Under shear flow, the additive forms highly extended crystals which lie parallel to the flow‐field and which serve to direct the crystallisation of the polymer leading to a massive amplification of the anisotropy present in the melt.

TEM image of a carbon replica taken from an etched surface of a PE sample containing 1% of DBS.     

Remarkable Change in Fluorescence Emission of Poly(diphenylacetylene) Film via in situ Desilylation Reaction: Correlation with Variations in Microporous Structure,Chain Conformation,and Lamellar Layer Distance

Fluorescence (FL) emission properties, microporous structures, energy‐minimized chain conformations, and lamellar layer structures of the silicon‐containing poly(diphenylacetylene) derivative of p‐PTMSDPA before and after desilylation were investigated. The nitrogen‐adsorption isotherms of p‐PTMSDPA film before and after desilylation were typical of type I, indicating microporous structures. The BET surface area and pore volume of the p‐PTMSDPA film were significantly reduced after the desilylation reaction, simultaneously, its FL emission intensity remarkably decreased. The theoretical calculation on both model compounds of p‐PTMSDPA and its desilylated polymer, PDPA, showed a remarkable difference in chain conformation: The side phenyl rings of p‐PTMSDPA are discontinuously arranged in a zig‐zag pattern, while the PDPA is continuously coiled in a helical manner. The lamellar layer distance (LLD) in the p‐PTMSDPA film significantly decreased after the desilylation reaction.

     

Additional Retardation in RAFT Polymerization: Detection of Terminated Intermediate Radicals

The reversible addition‐fragmentation chain transfer (RAFT) polymerization of N‐acryloylmorpholine (NAM) is performed using three dithioesters (DT) as chain transfer agents (CTA) that incorporate a morpholine (morpholine‐DT), a biotin (biotin‐DT), or a sugar (sugar‐DT) moiety in the R group. PolyNAM chains of controlled characteristics are synthesized. An unexpected behavior is observed with morpholine‐DT, described as an ‘additional retardation’, which is especially visible when low molar masses are targeted ( < 5 000 g · mol⁻¹). In that particular case, further investigations using MALDI‐TOF mass spectrometry show the presence of terminated intermediate radicals (IRs), which corroborates the assumption based on a specific protection of IR according to the nature of the α‐chain‐end.

     

New Poly(arylene ethynylene)s Consisting of Electron‐Deficient Aryleneimide Units

Summary: A new class of poly(arylene ethynylene)s (PAEs) containing an electron‐deficient N‐alkylphthalimide unit was prepared by means of a Sonogashira reaction. Complete solubility of the PAEs was observed by utilizing a 2,6‐diisopropylphenyl side chain. The chemical structure of the novel soluble polymer 3c was confirmed by NMR spectra, whereas the insoluble polymers were characterized by elemental analysis and IR spectra. Fluorescence measurements of 3c indicate a rigid structure and high symmetry in the excited state.

     

Distribution Function and Thermodynamic Potentials of a Self‐Avoiding Chain

Summary: An explicit expression is derived for the distribution function of end‐to‐end vectors for a flexible self‐avoiding chain. Based on this relation, analytical formulas are developed for the free and internal energies of a chain with excluded‐volume interactions. Force–stretch relations are obtained at uniaxial tension and compression. The effects of strength of segment interactions on the shapes of the distribution function and the force‐displacement diagram, as well as on the mean‐square end‐to‐end distance and stiffness of a chain are studied numerically.

The dimensionless distribution function P versus the dimensionless end‐to‐end vector Q^* for self‐repellent chains with χ = 0.0, 0.4, 0.8, 1.2, and 1.6, from top to bottom, respectively.     

Supramolecular Assembly of Gold Nanoparticles Mediated by Polypseudorotaxane with Thiolated β‐Cyclodextrin

Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.

A typical TEM image of gold nanoparticle aggregate 2 .     

SET‐RAFT Polymerization of Progargyl Methacrylate and a One‐Pot/One‐Step Preparation of Side‐chain Functionalized Polymers via Combination of SET‐RAFT and Click Chemistry

A clickable alkyne monomer, PgMA, was successfully polymerized in a well‐controlled manner via single electron transfer initiation and propagation through the radical addition fragmentation chain transfer (SET‐RAFT) method. The living nature of the polymerization was confirmed by the first‐order kinetic plots, the linear relationships between molecular weights and the monomer conversions while keeping relatively narrow (≤1.55), and the successful chain‐extension with MMA. The better controllability of SET‐RAFT than other CRP methods is attributed to the less competitive termination in view of the presence of the CTA as well as the Cu(II) that is generated in situ. Moreover, a one‐pot/one‐step technique combining SET‐RAFT and “click chemistry” methods has been successfully employed to prepare the side‐chain functionalized polymers.

     

Synthesis of Well‐Defined Rod‐Coil Diblock Copolymer of Aromatic Polyether and Polyacrylonitrile by Chain‐Growth Condensation Polymerization and Atom Transfer Radical Polymerization

The synthesis of diblock copolymers of aromatic polyether and polyacrylonitrile (PAN) was conducted by chain‐growth condensation polymerization (CGCP) and atom transfer radical polymerization (ATRP) from an orthogonal initiator. When CGCP for aromatic polyether was carried out from a PAN macroinitiator obtained by ATRP with an orthogonal initiator, decomposition of the PAN backbone occurred. However, when ATRP of acrylonitrile was conducted from an aromatic polyether macroinitiator obtained by CGCP followed by introduction of an ATRP initiator unit, the polymerization proceeded in a well‐controlled manner to yield aromatic polyether‐block‐polyacrylonitrile (polyether‐b‐PAN) with low polydispersity. This block copolymer self‐assembled in N,N‐dimethylformamide to form bundle‐like or spherical aggregates, depending on the length of the PAN units in the block copolymer.

     

Synthesis and Characterization of a Novel Calix[4]arene‐Based Periodic Mesoporous Organosilica

Summary: A new calix[4]arene‐based periodic mesoporous organosilica has been synthesized using tetraethoxysilane (TEOS) and a calix[4]arene‐based silane monomer as the precursors and cetyltrimethylammonium bromide (CTAB) surfactant as the structure‐directing template, and is shown to be capable of visual detection and entrapment of NO₂.

Synthesis of the novel mesoporous organosilica material containing covalently bound tetra‐O‐alkylated calix[4]arene hosts.     

Synthesis of a Novel Glycopeptide by Polymeranalogous Reaction of Gelatin with Mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin and its Supramolecular Properties

A synthetic model glycoprotein was successfully synthesized using gelatin and mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin which were reacted under microwave conditions in basic media. The resulting glycoprotein is observed to form intermolecular inclusion complexes through complexation of the aromatic moieties along the polymer chain by the attached cyclodextrins. This phenomenon was analyzed and proven by 2D NMR spectroscopy (ROESY) and dynamic light scattering (DLS). Above the denaturation temperature, a strong increase of the hydrodynamic diameter was found due to enhanced supramolecular agglomeration. Such a novel glycoprotein with supramolecular self‐recognition would be promising in biomedical applications serving as a drug‐delivery basis polymer.

     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Free Energy of Deformation of the Radius of Gyration in Semiflexible Chains

The distribution function P(S) of the radius of gyration S, the corresponding elastic free energy A(S) and the mean force were computed from simulations based on the wormlike chain (WLC) model. The relation of the S‐conjugated elastic functions to the analogous functions based on the chain vector R and their connection to the statistical‐mechanics ensembles was elucidated. Simulation data revealed that available analytical functions for P(S) fail to predict the behavior of semiflexible chains. When the power‐law function P(S) was used instead, the exponents sizeably raised with stiffness at chain expansion. The exponents deduced from elastic compression of a chain agreed fairly with the scaling exponents for chain confinement into a sphere.

     

Preparation and Properties of New Soluble π‐Conjugated Polymers Containing a Fumaronitrile Unit in the Main Chain

Summary: A class of new, soluble, π‐conjugated polymers containing a fumaronitrile unit in the main chain were synthesized by the reaction between di(4‐bromophenyl)fumaronitrile and bis(2,2‐dimethylpropane‐1,3‐diyl)‐1,4‐dialkoxyphenylene‐2,5‐diborate employing palladium catalysts. All the polymers were photoluminescent and electrochemically active.

The new soluble π‐conjugated polymers 1a – d with photoluminescence and electrochemical activity synthesized here.     

Existence of Two Different Isotropic Phases as a Reason for Bistable Phase Behavior of an LC Side‐Chain Polymethacrylate

An isotropic melt of a chiral side‐chain polymethacrylate was studied by electric birefringence technique. A phase transition between two different isotropic phases was detected by Kerr effect and confirmed by WAXS measurements. The obtained experimental data can explain the previously reported bistable phase behavior of the polymer, as conventional Sm A phase is formed in slow cooling whereas a TGB‐like, optically isotropic mesophase in fast cooling.