New Multifunctional Porous Materials Based on Inorganic–Organic Hybrid Single‐Walled Carbon Nanotubes: Gas Storage and High‐Sensitive Detection of Pesticides

Single‐walled carbon nanotubes (SWNTs) that are covalently functionalized with benzoic acid (SWNT‐PhCOOH) can be integrated with transition‐metal ions to form 3D porous inorganic–organic hybrid frameworks (SWNT‐Zn). In particular, N₂‐adsorption analysis shows that the BET surface area increases notably from 645.3 to 1209.9 m² g^?1 for SWNTs and SWNT‐Zn, respectively. This remarkable enhancement in the surface area of SWNT‐Zn is presumably due to the microporous motifs from benzoates coordinated to intercalated zinc ions between the functionalized SWNTs; this assignment was also corroborated by NLDFT pore‐size distributions. In addition, the excess‐H₂‐uptake maximum of SWNT‐Zn reaches about 3.1 wt. % (12 bar, 77 K), which is almost three times that of the original SWNTs (1.2 wt. % at 12 bar, 77 K). Owing to its inherent conductivity and pore structure, as well as good dispersibility, SWNT‐Zn is an effective candidate as a sensitive electrochemical stripping voltammetric sensor for organophosphate pesticides (OPs): By using solid‐phase extraction (SPE) with SWNT‐Zn‐modified glassy carbon electrode, the detection limit of methyl parathion (MP) is 2.3 ng mL^?1.     

Interaction of Aromatic Derivatives with Single‐Walled Carbon Nanotubes

Fluorescence of semiconducting single‐walled carbon nanotubes (SWNTs) normally exhibits diameter‐dependent oxidative quenching behaviour. This behaviour can be changed substantially to become an almost diameter‐independent quenching phenomenon in the presence of electron‐withdrawing nitroaromatic compounds, including o‐nitrotoluene, 2,4‐dinitrotoluene, and nitrobenzene. This change is observed for SWNTs suspended either in sodium dodecyl sulfate or in Nafion upon titration with hydrogen peroxide. Benzene, toluene, phenol, and nitromethane do not show such change. These findings suggest the possibility of forming an electron donor–acceptor complex between SWNTs and nitroaromatic compounds, resulting in leveling the redox potential of different SWNT species. The observation appears to provide a new method for modifying the electrochemical potentials of SWNTs through donor–acceptor complex formation.     

A Supramolecular Approach for the Facile Solubilization and Separation of Covalently Functionalized Single‐Walled Carbon Nanotubes

Through a combination of an electronic‐type selective diazonium‐based attachment of a Hamilton receptor unit onto the carbon nanotube framework and a supramolecular recognition approach of a cyanuric acid derivative, we herein introduce a highly promising strategy for the tuning of carbon nanotube solubility and, directly related to that, a solution‐based easy and straightforward separation of covalently functionalized carbon nanotube derivatives with respect to their unfunctionalized counterparts. The supramolecular complexation of the cyanuric acid derivative provides the driving force for the dramatically increased dispersibility and for the long‐time stability of the individualized single‐walled carbon nanotube derivatives in chloroform. The selective covalent functionalization of metallic carbon nanotubes can easily be analyzed with the aid of scanning Raman microscopy techniques. The functional derivatives have furthermore been characterized by UV/Vis‐NIR and fluorescence spectroscopy as well as by mass spectrometric coupled thermogravimetric analysis. The investigation of the supramolecular complexation is based on an in‐depth UV/Vis‐NIR analysis and atomic force microscopy investigations.     

Supramolecular Gels Based on Multi‐Walled Carbon Nanotubes Bearing Covalently Attached Cyclodextrin and Water‐Soluble Guest Polymers

The preparation of associative networks containing multi‐walled carbon nanotubes (MWCNTs) with covalently attached cyclodextrin (CD) rings and poly[(isobutylene)‐co‐(maleic anhydride)‐co‐(maleic acid‐(4‐tert‐butylphenyl)amide)] in water is described in this study. The synthesis of CD containing MWCNTs is realized by an amidation reaction of oxidized MWCNTs with propargylamine followed by a 1,3‐dipolar cycloaddition with CD‐azide. Dispersion behavior indicated the high stability of these networks. An increase in viscosity compared to a solution of pure polymer as a cause of network formation is observed. The addition of a CD‐decomposing enzyme (taka‐diastase from Aspergillus oryzae) let the network collapse and results in sedimentation of the modified MWCNTs.

     

Probing the Chemical Functionalization of Single‐Walled Carbon Nanotubes with Multiple Carbon Ad‐Dimer Defects

Drying‐tube‐shaped single‐walled carbon nanotubes (SWCNTs) with multiple carbon ad‐dimer (CD) defects are obtained from armchair (n,n,m) SWCNTs (n=4, 5, 6, 7, 8; m=7, 13). According to the isolated‐pentagon rule (IPR) the drying‐tube‐shaped SWCNTs are unstable non‐IPR species, and their hydrogenated, fluorinated, and chlorinated derivatives are investigated. Interestingly, chemisorptions of hydrogen, fluorine, and chlorine atoms on the drying tube‐shaped SWCNTs are exothermic processes. Compared to the reaction energies for binding of H, F, and Cl atoms to perfect and Stone–Wales‐defective armchair (5,5) nanotubes, binding of F with the multiply CD defective SWCNTs is stronger than with perfect and Stone–Wales‐defective nanotubes. The reaction energy for per F₂ addition is between 85 and 88 kcal mol^?1 more negative than that per H₂ addition. Electronic structure analysis of their energy gaps shows that the CD defects have a tendency to decrease the energy gap from 1.98–2.52 to 0.80–1.17 eV. After hydrogenation, fluorination, and chlorination, the energy gaps of the drying‐tube‐shaped SWCNTs with multiple CD defects are substantially increased to 1.65–3.85 eV. Furthermore, analyses of thermodynamic stability and nucleus‐independent chemical shifts (NICS) are performed to analyze the stability of these molecules.     

Hetero Diels–Alder Chemistry for the Functionalization of Single‐Walled Carbon Nanotubes with Cyclopentadienyl End‐Capped Polymer Strands

Single‐walled carbon nanotubes (SWCNTs) are pre‐functionalized with a pyridinyl‐based dithioester to undergo a hetero Diels–Alder (HDA) reaction with cyclopentadienyl end‐capped poly(methyl)methacrylate (M _n = 2700 g mol⁻¹, PDI = 1.14). Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis (EA), and X‐ray photoelectron spectroscopy (XPS) evidence the success of the grafting process. The estimated resulting grafting density (from XPS and EA) via the HDA reaction increases by a factor of more than two (0.0774 chains·nm⁻² via XPS) compared with typical values obtained via a direct cyclopentadiene driven Diels–Alder conjugation onto non‐functional SWCNTs under similar conditions.

     

Functionalization of Multi‐Walled Carbon Nanotubes by Electrografting of Polyacrylonitrile

Summary: Multi‐walled carbon nanotubes (MWNTs) have been successfully modified with polyacrylonitrile (PAN) by a cathodic electrochemical process. The surface‐modified MWNTs afforded are then dispersible in good solvents for PAN, such as N,N‐dimethylformamide (DMF). Collected from a dilute dispersion, these MWNTs are essentially disentangled, as confirmed by transmission electron microscopy (TEM) analysis. From the differential scanning calorimetry (DSC) traces for polyacrylonitrile and polyacrylonitrile‐grafted MWNTs, the maximum grafting ratio is estimated at 0.28.

Electrochemical grafting of polyacrylonitriles onto the surface of multi‐walled carbon nanotubes.     

Single‐Walled Carbon Nanotubes as Scaffolds to Concentrate DNA for the Study of DNA–Protein Interactions

Genomic DNA in bacteria exists in a condensed state, which exhibits different biochemical and biophysical properties from a dilute solution. DNA was concentrated on streptavidin‐covered single‐walled carbon nanotubes (Strep ? SWNTs) through biotin–streptavidin interactions. We reasoned that confining DNA within a defined space through mechanical constraints, rather than by manipulating buffer conditions, would more closely resemble physiological conditions. By ensuring a high streptavidin loading on SWNTs of about 1 streptavidin tetramer per 4 nm of SWNT, we were able to achieve dense DNA binding. DNA is bound to Strep ? SWNTs at a tunable density and up to as high as 0.5 mg mL^?1 in solution and 29 mg mL^?1 on a 2D surface. This platform allows us to observe the aggregation behavior of DNA at high concentrations and the counteracting effects of HU protein (a histone‐like protein from Escherichia coli strain U93) on the DNA aggregates. This provides an in vitro model for studying DNA–DNA and DNA–protein interactions at a high DNA concentration.     

Selective and Scalable Chemical Removal of Thin Single‐Walled Carbon Nanotubes from their Mixtures with Double‐Walled Carbon Nanotubes

Double‐walled carbon nanotubes (DWCNTs) are materials in high demand due to their superior properties. However, it is very challenging to prepare DWCNTs samples of high purity. In particular, the removal of single‐walled carbon nanotubes (SWCNTs) contaminants is a major problem. Here, a procedure for a selective removal of thin‐diameter SWCNTs from their mixtures with DWCNTs by lithium vapor treatment is investigated. The results are evaluated by Raman spectroscopy and in situ Raman spectroelectrochemistry. It is shown that the amount of SWCNTs was reduced by about 35 % after lithium vapor treatment of the studied SWCNTs–DWCNTs mixture.     

Spectroscopic Characteristics of Differently Produced Single‐Walled Carbon Nanotubes

Single‐walled carbon nanotubes (SWNTs) synthesized with different methods are investigated by using multiple characterization techniques, including Raman scattering, optical absorption, and X‐ray absorption near edge structure, along with X‐ray photoemission by following the total valence bands and C 1s core‐level spectra. Four different SWNT materials (produced by arc discharge, HiPco, laser ablation, and CoMoCat methods) contain nanotubes with diameters ranging from 0.7 to 2.8 nm. The diameter distribution and the composition of metallic and semiconducting tubes of the SWNT materials are strongly affected by the synthesis method. Similar sp² hybridization of carbon in the oxygenated SWNT structure can be found, but different surface functionalities are introduced while the tubes are processed. All the SWNTs demonstrate stronger plasmon resonance excitations and lower electron binding energy than graphite and multiwalled carbon nanotubes. These SWNT materials also exhibit different valence‐band X‐ray photoemission features, which are considerably affected by the nanotube diameter distribution and metallic/semiconducting composition.     

微波辅助有机过氧化物功能化修饰单壁碳纳米管

本文报道了微波辅助下,利用过氧化月桂酰分解得到的十一烷基,化学功能化修饰单壁碳纳米管。这种快速、高效的方法将反应时间缩短至10分钟,并得到了比传统回流方法具有更高接枝率的产物。利用傅立叶变换红外光谱(FT-IR),热失重分析(TGA),拉曼光谱,探究了不同的反应时间和微波功率对单壁碳纳米管的接枝率的影响。结果表明：过长的反应时间会导致部分的去功能化的发生,而过高的微波功率(大于900瓦),则会将单壁碳纳米管上起初键连上的十一烷基剥落下来。分散性照片和高分辨率透射电子显微镜(HRTEM)照片显示出,功能化后的单壁碳纳米管与原始的碳管相比,在有机溶剂中的分散性有了明显的提高。     

Photoinduced Luminescence Blinking and Bleaching in Individual Single‐Walled Carbon Nanotubes

The temporal evolution of photoluminescence in individual single‐walled carbon nanotubes (SWNT) under strong laser irradiation is studied and pronounced blinking and bleaching is observed, caused by photoinduced oxidation that subsequently quenches mobile excitons. The nanotubes are isolated with sodium cholate and spun onto either a glass or mica surface. Their bleaching behavior is investigated for variable laser intensities in air and argon atmosphere. The decay rate for luminescence bleaching generally increases with higher laser intensity, however saturating on mica substrates, which is attributed to limited availability of oxygen in the vicinity of the nanotubes. Step‐like events in the luminescence time traces corresponding to single oxidation events are analyzed regarding relative step height and suggest an exciton diffusion range of about 105 nm.     

Influence of Polymer Electronics on Selective Dispersion of Single‐Walled Carbon Nanotubes

The separation and isolation of semiconducting and metallic single‐walled carbon nanotubes (SWNTs) on a large scale remains a barrier to many commercial applications. Selective extraction of semiconducting SWNTs by wrapping and dispersion with conjugated polymers has been demonstrated to be effective, but the structural parameters of conjugated polymers that dictate selectivity are poorly understood. Here, we report nanotube dispersions with a poly(fluorene‐co‐pyridine) copolymer and its cationic methylated derivative, and show that electron‐deficient conjugated π‐systems bias the dispersion selectivity toward metallic SWNTs. Differentiation of semiconducting and metallic SWNT populations was carried out by a combination of UV/Vis‐NIR absorption spectroscopy, Raman spectroscopy, fluorescence spectroscopy, and electrical conductivity measurements. These results provide new insight into the rational design of conjugated polymers for the selective dispersion of metallic SWNTs.     

Photochemical Behavior of Single‐Walled Carbon Nanotubes in the Presence of Propylamine

This report describes the photochemical behavior of single‐walled carbon nanotubes (SWNTs) in the presence of propylamine. The SWNTs are characterized by absorption and Raman spectroscopy. The spectral changes due to photoirradiation indicate that reactions occur predominantly with the metallic SWNTs and small‐diameter SWNTs. The detection of amine radicalcation species by ESR spectroscopy reveals photoinduced electron transfer from the amine to the excited SWNTs. After exposure of the photoirradiated SWNTs to air, the characteristic spectra were recovered, except for that of the small‐diameter SWNTs. The results suggest that, after photoreduction of the SWNTs, subsequent selective sidewall functionalization of the small‐diameter SWNTs occurs.     

DFT Studies of Ag‐Loading Intrinsic and Functionalized Single‐Walled Carbon Nanotubes

The first principles study was performed on the stability of Ag adsorbed on the internal walls of single‐walled carbon nanotube (SWCNT) and loaded on acid modified SWCNT. The calculation results show that Ag can be adsorbed stably on the internal walls of SWCNT. With the increase of SWCNT diameter, the adsorption energy increases in a certain range. Ag can also be loaded on the modified SWCNT surface in the form of COOAg and OAg groups, and COOAg group is more stable than OAg group. For either the adsorption on the inner SWCNT or the load on the modified SWCNT surface, only a small proportion of the Ag ions can be stably bonded to the walls of SWCNT.