Synthesis and chirooptical properties of optically active poly(ester imide)s based on axially asymmetric 1,1′‐binaphthyls

A series of optically active poly(ester imide)s (PEsI's) has been synthesized by the polycondensation reactions of new axially asymmetric dianhydrides, that is, (R)‐2,2′‐bis(3,4‐dicarboxybenzoyloxy)‐1,1′‐binaphthyl dianhydride and (S)‐2,2′‐bis(3,4‐dicarboxybenzoyloxy)‐1,1′‐binaphthyl dianhydride, and various diamines with aromatic, semiaromatic, and aliphatic structures. The polymers have inherent viscosities of 0.45–0.70 dL/g, very good solubility in common organic solvents, glass‐transition temperatures of 124–290 °C, and good thermal stability. Wide‐angle X‐ray crystallography of these polymers shows no crystal diffraction. In comparison with model compounds, an enhanced optical rotatory power has been observed for the repeat unit of optically active PEsI's based on aromatic diamines, and it has been attributed to a collaborative asymmetric perturbation of chiral 1,1′‐binaphthyls along the rigid backbones. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4318–4326, 2004     

Optically active poly(amide–imide)s containing axially dissymmetric 1,1′-binaphthyl moieties

Novel optically active aromatic poly(amide–imide)s (PAIs) were prepared from newly synthesized 2,2′-bis(3,4-dicarboxybenzamido)-1,1′-binaphthyl dianhydride ((+ )-, (S)-, and (R)-BNDADA). PAIs based on dianhydride monomers with different ee % were investigated with respect to their structures and chiroptical properties. These polymers were highly soluble in polar aprotic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, pyridine, etc., and showed high glass transition temperatures of 287–290°C and 5% weight loss temperatures of 450–465°C in nitrogen. Optically active PAIs exhibited high specific rotations, excellent optical stabilities, and a dependence of optical activities on temperature. Investigations on chiroptical properties indicated that chiral conformation was possessed by optically active PAIs. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3147–3154, 1999     

Synthesis and characterization of well‐defined optically active methacrylic diblock copolymers

A new, simple, and cost‐effective approach toward the development of well‐defined optically active diblock copolymers based on methacrylate monomers is described for the first time. Starting from the low‐cost optically active (S)‐(?)‐2‐methyl‐1‐butanol, a new optically active methacrylic monomer, namely, (S)‐(+)‐2‐methyl‐1‐butyl methacrylate [(S)‐(+)‐MBuMA], was synthesized. Reversible addition fragmentation chain transfer polymerization was then used for preparing well‐defined poly[(S)‐(+)‐MBuMA] homopolymers and water‐soluble diblock copolymers based on [(S)‐(+)‐MBuMA] and the hydrophilic and ionizable monomer 2‐(dimethyl amino)ethyl methacrylate (DMAEMA). The respective homopolymers and diblock copolymers were characterized in terms of their molecular weights, polydispersity indices, and compositions by size exclusion chromatography and ¹H NMR spectroscopy. Polarimetry measurements were used to determine the specific optical rotations of these systems. The structural and compositional characteristics of micellar nanostructures possessing an optically active core generated by p((S)‐(+)‐MBuMA)‐b‐p(DMAEMA) chains characterized by predetermined molecular characteristics may be easily tuned to match biological constructs. Consequently, the aggregation behavior of the p[(S)‐(+)‐MBuMA]‐b‐p[DMAEMA] diblock copolymers was investigated in aqueous media by means of dynamic light scattering and atomic force microscopy, which revealed the formation of micelles in neutral and acidified aqueous solutions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Asymmetric radical polymerization and copolymerization of N‐(1‐phenyldibenzosuberyl)methacrylamide and its derivative leading to optically active helical polymers

N‐(1‐Phenyldibenzosuberyl)methacrylamide (PDBSMAM) and its derivative N‐[(4‐butylphenyl)dibenzosuberyl]methacrylamide (BuPDBSMAM) were synthesized and polymerized in the presence of (+)‐ and (?)‐menthols at different temperatures. The tacticity of the polymers was estimated to be nearly 100% isotactic from the ¹H NMR spectra of polymethacrylamides derived in D₂SO₄. Poly(PDBSMAM) was not soluble in the common organic solvents, and its circular dichroism spectrum in the solid state was similar to that of the optically active poly(1‐phenyldibenzosuberyl methacrylate) (poly(PDBSMA)) with a prevailing one‐handed helicity, indicating that the poly(PDBSMAM) also has a similar helicity. Poly(BuPDBSMAM) was optically active and soluble in THF and chloroform. Its optical activity was much higher than that of the poly[N‐(triphenylmethayl)methacrylamide], suggesting that one‐handed helicity may be more efficiently induced on the poly(BuPDBSMAM). The copolymerization of BuPDBSMAM with a small amount of optically active N‐[(R)‐(+)‐1‐(1‐naphthyl)ethyl]methacrylamide, particularly in the presence of (?)‐menthol, produced a polymer with a high optical activity. The prevailing helicity may also be efficiently induced. The chiroptical properties of the obtained polymers were studied in detail. The chiral recognition by the polymers was also evaluated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1304–1315, 2007     

Optical properties of inherently dissymmetric polyamides

A study of the optical rotatory dispersion (ORD), circular dichroism (CD), and ultraviolet spectra (UV) of polyamides derived from optically active biphenyl acid chlorides, and aromatic, and aliphatic diamines, was made. The optically active monomers were (–)-(S)-2,2′-dinitro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride and (–)-(S)-2,2′-dichloro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride. The diamines were o-, m-, and p-phenylenediamine, piperazine, trans-2,5-dimethylpiperazine, and 1,2-pyrazolidine. The ORD spectra of the o-phenylenediaminepolyamide taken in different solvents indicated the existence of some ordered structure in the least polar solvent. All other polyamides existed in a random coil conformation in the solvents employed.     

α‐Propargyl amino acid‐derived optically active novel substituted polyacetylenes: Synthesis,secondary structures,and responsiveness to ions

Novel optically active substituted acetylenes HC? CCH₂CR¹(CO₂CH₃)NHR² [(S)‐/(R)‐ 1 : R¹ = H, R² = Boc, (S)‐ 2 : R¹ = CH₃, R² = Boc, (S)‐ 3 : R¹ = H, R² = Fmoc, (S)‐ 4 : R¹ = CH₃, R² = Fmoc (Boc = tert‐butoxycarbonyl, Fmoc = 9‐fluorenylmethoxycarbonyl)] were synthesized from α‐propargylglycine and α‐propargylalanine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights of 2400–38,900 in good yields. Polarimetric, circular dichroism (CD), and UV–vis spectroscopic analyses indicated that poly[(S)‐ 1 ], poly[(R)‐ 1 ], and poly[(S)‐ 4 ] formed predominantly one‐handed helical structures both in polar and nonpolar solvents. Poly[(S)‐ 1a ] carrying unprotected carboxy groups was obtained by alkaline hydrolysis of poly[(S)‐ 1 ], and poly[(S)‐ 4b ] carrying unprotected amino groups was obtained by removal of Fmoc groups of poly[(S)‐ 4 ] using piperidine. Poly[(S)‐ 1a ] and poly[(S)‐ 4b ] also exhibited clear CD signals, which were different from those of the precursors, poly[(S)‐ 1 ] and poly[(S)‐ 4 ]. The solution‐state IR measurement revealed the presence of intramolecular hydrogen bonding between the carbamate groups of poly[(S)‐ 1 ] and poly[(S)‐ 1a ]. The plus CD signal of poly[(S)‐ 1a ] turned into minus one on addition of alkali hydroxides and tetrabutylammonium fluoride, accompanying the red‐shift of λ_max. The degree of λ_max shift became large as the size of cation of the additive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Helical poly(phenylacetylene) derived from L‐tyrosine: A promising candidate for functional helical polymers carrying transformable N‐ and C‐termini

A novel optically active phenylacetylene derivative, N‐(tert‐butoxycarbonyl)‐4‐ethynyl‐L ‐phenylalanine methyl ester ( 1 ), was synthesized from L ‐tyrosine and polymerized with a rhodium catalyst. The corresponding polymer [poly( 1 )] with a moderate molecular weight was obtained in a high yield. The alkaline hydrolysis of poly( 1 ) gave poly[N‐(tert‐butoxycarbonyl)‐4‐ethynyl‐L ‐phenylalanine] [poly( 2 )] carrying free carboxy groups. Polarimetric, CD, and UV–vis spectroscopy analyses revealed that poly( 1 ) took a predominantly one‐handed helical structure in MeOH and toluene, and poly( 2 ) took a helical structure in MeOH. The secondary structures of poly( 1 ) and poly( 2 ) could be tuned with heat and solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1691–1698, 2007     

Optically active imidazole-containing polymers

In order to investigate the stereospecificity of enzyme-catalyzed reactions, an optically active copolymer of 4(5)-vinylimidazole and 2,5(S)-dimethyl-1-hepten-3-one was synthesized, and its effects on the solvolytic rates, in ethanol-water, of the p-nitrophenyl and 4-carboxy-2-nitrophenyl esters of 3(R)- and 3(S)-methylpentanoic acid and of the commercially available N-carbobenzoxy-(R)- and (S)-phenylalanine p-nitrophenyl esters were investigated. The optically active comonomer was prepared by thermal decomposition of solid (+)-1-piperidino-2,5(S)-dimethylheptan-3-one hydrochloride, which was obtained from the reaction of 2(S)-methylbutyllithium with 3-piperidino-2-methylpropionitrile. The 3(R)-methylpentanoic acid was prepared in 92% optical purity from L -alloisoleucine via diazotization in concentrated hydrobromic acid and subsequent reductive debromination with zinc amalgam in dilute hydrochloric acid. In the optically active copolymer-catalyzed solvolyses of the optically active esters performed at pH values of 6–8 no significant differences between the solvolytic rates of (R) and (S) isomers of substrates were observed. Poly-L -histidine was also employed as a catalyst for the solvolyses of these substrates. At pH 6.0 in ethanol–water the latter catalyst also failed to exhibit specificity towards (R) and (S) substrates.     

Helix‐sense‐selective copolymerization of triphenylmethyl methacrylate with chiral 2‐isopropenyl‐4‐phenyl‐2‐oxazoline

The asymmetric induction leading to a one‐handed helix was investigated in the anionic and radical copolymerization of triphenylmethyl methacrylate (TrMA) and (S)‐2‐isopropenyl‐4‐phenyl‐2‐oxazoline ((S)‐IPO), and highly isotactic copolymers with a reasonable optical activity were obtained. In the anionic copolymerization, the optical activity of the obtained copolymers depended on the polarity of solvents, and a highly optically active copolymer was produced in the copolymerization in toluene. The chiral oxazoline monomer functioned not only as a comonomer but also as a chiral ligand to endow the polymer with large negative optical rotation in the copolymerization with TrMA. The copolymers with small positive optical rotation were obtained in THF, indicating that IPO unit may work only as the chiral monomer that dictates the helical sense via copolymerization with TrMA. The isotacticity of the obtained copolymers depended on the contents of TrMA units in the copolymers, but was almost independent of the solvent for copolymerization. In the radical copolymerization, the obtained copolymers exhibited small optical activities. It seemed that the chiral monomer cannot induce one‐handed helical structure of TrMA sequences even if the sequences probably have a high isotacticity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 441–447     

Synthesis and properties of optically active aromatic polyimides derived from optically pure 1,1′-bi-2-naphthol

A series of new optically active aromatic polyimides containing axially dissymmetric 1,1′-binaphthalene-2,2-diyl units were prepared from optically pure (R)-(+)- or(S)-(−)-2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthalene dianhydrides and various aromatic diamines via a conventional two-step procedure that included ring-opening polycondensation and chemical cyclodehydration. The optically pure isomer of dianhydride was prepared by a nucleophilic substitution of optically pure (R)-(+)- or(S)-(−)-1,1′-bi-2-naphthol with 4-nitrophthalonitrile in aprotic polar solvent and subsequent hydrolysis of the resultant tetranitrile derivatives, followed by the dehydration of the corresponding tetracarboxylic acids to obtain the dianhydrides. These polymers were readily soluble in common organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and m-cresol, etc., and have glass transition temperatures of 251–296°C, and 5% weight loss occurs not lower than 480°C. The specific rotations of the optically active polyimides ranged from +196° to +263°, and the optical stability and chiroptical properties of them were also studied. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3287–3297, 1997     

Preparation of polymer optical fibers doped with nonlinear optical active organic chromophores

We synthesized two novel organic nonlinear optical chromophores—chiral S(+)‐N‐[p‐(4‐nitrostyryl) phenyl] prolinol and non‐chiral [p‐(4‐nitrostyryl) phenyl] piperdine—as potential laser‐active dyes for photonic applications. Both materials show good optical transmittance in the telecommunication frequency region, desirable solubility in acrylic polymer optical fiber matrices, and attractive fluorescence properties that are advantageous for laser‐gain materials and devices. Subsequently, these two chromophores were incorporated into poly(methyl methacrylate) and poly(ethyl methacrylate) and drawn into polymer optical fibers. The relevant properties of these organic dye‐doped fibers have been studied, revealing essential attributes of laser‐active characteristics. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1794–1801, 2001     

Chiral arylnickel complexes as highly active initiators for screw‐sense selective living polymerization of 1,2‐diisocyanobenzenes

Optically active chiral organonickel complexes served as efficient chiral initiators for living aromatizing polymerization of 1,2‐diisocyanobenzene derivatives, which afford optically active helical poly(quinoxaline‐2,3‐diyl)s up to 84% s.e. (screw‐sense excess). In comparison with asymmetric polymerization with the corresponding organopalladium initiators, the nickel initiators show a much greater polymerization rate, while the selectivity remains high. The organonickel initiators can be generated in situ from nickel(0) precursors with the corresponding enantiopure (S,S)‐2‐(4,5‐diphenylimidazolin‐2‐yl)phenyl chloride, leading to the convenient synthesis of highly stereo‐controlled poly(quinoxaline‐2,3‐diyl)s. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 898–904, 2010     

Synthesis and asymmetric polymerization of (S)‐N‐maleoyl‐L‐leucine propargyl ester

A kind of N‐substituted maleimide (RMI), chiral (S)‐N‐maleoyl‐L ‐leucine propargyl ester ((S)‐PLMI) with a specific rotation of [α]₄₃₅ = ?27.5° was successfully synthesized from maleic anhydride, L ‐leucine, and propargyl alcohol. (S)‐PLMI was polymerized by three polymerization methods to obtain the corresponding optically active polymers. Asymmetric anionic, radical, and transition‐metal‐catalyzed polymerizations were carried out using organometal/chiral ligands, 2,2′‐azobisisobutyronitrile (AIBN) and (bicyclo [2,2,1]hepta‐2,5‐diene) chloro rhodium (I) dimer ([Rh(nbd) Cl]₂), respectively. Poly((S)‐PLMI) obtained by [Rh(nbd)Cl]₂ in DMF showed the highest specific rotation of ?280.6°. Chiroptical properties and structures of the polymers obtained were investigated by GPC, CD, IR, and NMR measurements. Two types of poly((S)‐PLMI)‐bonded‐silica gels as the chiral stationary phase (CSP) were prepared for high‐performance liquid chromatography (HPLC). Their optical resolution abilities were also elucidated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3722–3738, 2007     

Achiral Polydialkylsilane Aggregates That Record Stirring Direction

Achiral polysilane aggregates can recognize the chirality of low‐molecular‐weight compounds. It was found that they can also record the stirring direction. Poly(n‐decyl‐2‐methylpropylsilane), poly(n‐nonyl‐2‐methylpropylsilane), poly(n‐decyl‐2‐ethylbutylsilane), and poly(n‐decyl‐(S)‐2‐methylbutylsilane) aggregates were prepared in a mixture of tetrahydrofuran/isopropanol. Although the optical activity of the aggregates of the polysilane with chiral side chains was not tunable by changing the direction of the vortex flow, that of the aggregates of the optically inactive polysilane had a strong relationship to the direction, time, and rate of the vortex flow. The chiral stacked polysilanes were proposed to exist at the surfaces of the aggregates. The optically inactive polysilanes also exhibited optical activity under shear force with a distinct signal in the linear dichroism (LD) spectra of the achiral aggregates in vortex flows. However, the LD signals did not have a significant influence on the circular dichroism signals.     

Asymmetric anionic polymerization of N‐1‐naphthylmaleimide with chiral ligand‐organometal complexes in toluene

Asymmetric anionic homopolymerizations of N‐1‐naphthylmaleimide (1‐NMI) were performed with chiral ligand/organometal complexes to form optically active polymers. Poly(1‐NMI)s obtained with methylene‐bridged bisoxazoline derivatives (Rbox)‐diethylzinc (Et₂Zn) complexes showed high specific optical rotations ([α]) from +152.3 to +191.4°. Circular dichroism spectra of the polymers exhibited a split Cotton effect in the UV absorption‐band region. According to the exciton chirality method, the absolute configuration of the polymer main chain was determined according to the following method: (+)‐poly[N‐substituted maleimides (RMI)] main chains can contain more (S,S)‐ than (R,R)‐configurations. (?)‐Poly(RMI) main chains can contain more (R,R)‐ than (S,S)‐configurations. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3556–3565, 2001     

Chiral oxazoline substituted optically active poly(m‐phenylene)s: Synthesis and coupling polymerizations of (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl) oxazoline using transition metal catalysts

Optically active poly(m‐phenylene)s substituted with chiral oxazoline derivatives have been synthesized by the nickel‐catalyzed Yamamoto coupling reaction of optically active (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl)oxazoline derivatives (X = Br or I). The structures and chiroptical properties of the polymers were characterized by spectroscopic methods and thermal gravimetric analyses. The polymers showed higher absolute optical specific rotation values than their corresponding monomer, and showed a Cotton effect at transition region of conjugated main chain. The optical activities of the polymers should be attributed to the higher order structure such as helical conformations. Moreover, the helical conformation could be induced by addition of metal salts into polymer solutions. The polymers showed good thermal stabilities, which was attributable to the oxazoline side chains. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of optically active alicyclic polyimides from a chiral,nonracemic dianhydride

Optically active alicyclic polyimides were prepared for the first time from (?)‐[1S*,5R*,6S*]‐3‐oxabicyclo[3.2.1]octane‐2,4‐dione‐6‐spiro‐3′‐(tetrahydrofuran‐ 2′,5′‐dione) [(?)‐DAn] via polycondensation with diamines and subsequent chemical or thermal imidization. The dianhydride (?)‐DAn was synthesized by an asymmetric Diels–Alder reaction of a chiral itaconic acid derivative as a key step. Colorless or slightly yellow flexible films were obtained for the (?)‐DAn‐derived polyimides {PI[(?)‐DAn]s}. PI[(?)‐DAn]s showed good solubility toward dipolar aprotic solvents and pyridine. For 1,4‐dioxane and chloroform, the optically active polyimides showed slightly better solubility than the corresponding polyimides prepared from rac‐DAn [PI(rac‐DAn)s]. PI[(?)‐DAn]s showed glass‐transition temperatures of 267–268 °C and 10% weight‐loss temperatures of 416–424 °C in nitrogen. These values were almost identical to those of PI(rac‐DAn)s. The circular dichroism spectra of PI[(?)‐DAn]s showed exciton coupling patterns indicating that to some extent these polyimides had a higher order structure in solution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4038–4044, 2002     

Synthesis and ferroelectric properties of chiral liquid crystals derived from (S)‐1‐propyloxy‐2‐propanol

A new optically active chiral moiety, (S)‐1‐propyloxy‐2‐propanol, was designed and synthesized by the treatment of 1‐propanol with (S)‐propylene oxide under basic conditions. Its derivatives, the (R)‐1‐propyloxy‐2‐propyl 4‐[4‐(4‐alkoxyphenyl)phenoyloxy]benzoates, PPmPPB (m = 8–12), were prepared for the investigation of mesomorphic properties. All of the chiral materials displayed enantiotropic SmA? and SmC? phases, and the shorter alkyl chain members (m = 8–11) displayed an additional unidentified SmX? phase. The switching current, spontaneous polarization, tilt angle, dielectric constant and electro‐optical response for the materials in the ferroelectric SmC? phase were measured. The electro‐optic responses in polyimide film‐coated homogeneously aligned cells exhibit thresholdless, V‐shaped switching in the ferroelectric phase.     

Preparation of chiral polystyrene monoliths by utilizing W/O emulsion polymerization and their optical resolution ability

We synthesized two kinds of chiral polystyrene‐based monoliths, which are macroporous gel with continuous open‐celled monolith structure. Thus, two chiral styrene monomers, (–)‐p‐[dimethyl(10‐pinanyl)silyl]styrene ((–)‐PSSt) and (–)‐p‐(menthoxycarbonyl)styrene ((–)‐MtSt]), were prepared and subjected to water‐in‐oil emulsion polymerization in the presence of divinylbenzene and AIBN. The macroporous structure of the obtained monoliths was directly confirmed by SEM observation. The obtained monoliths showed an optical resolution ability. That is, in the enantioselective adsorption using trans‐stilbene oxide, poly[(–)‐PSSt] monolith and poly[(–)‐MtSt] monoliths preferentially adsorbed (S,S)‐isomer [poly[(–)‐PSSt] monolith: α^(S,S) = 1.49 (0.25 wt % acetone solution); poly[(–)‐MtSt] monolith: α^(S,S) = 1.39 (0.25 wt % toluene solution)]. Depinanylsilylation of the poly[(?)‐PSSt] monolith and removal of menthyl groups from the poly[(–)‐MtSt] monolith were achieved by acid‐catalyzed scission of the Si? C bond and base‐catalyzed hydrolysis, respectively. In addition, de‐poly[(–)‐PSSt] and de‐poly[(–)‐MtSt] showed enantioselectivity ((S,S)‐isomer preferentially absorbed) in adsorption using trans‐stilbene oxide in spite of the absence of chiral substituents in the monoliths. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2348–2357, 2005     

The Control of the Stereochemistry in the Palladium‐Catalyzed Alternating Styrene/Carbon Monoxide Copolymerization: Effect of the Chirality of the Ligand and of the Ligand‐to‐Palladium Ratio,Preliminary Communication

Diaquapalladium(2+) trifluoromethanesulfonates modified with (4R,4′S)‐ or (4S,4′S)‐2,2′‐bis(4‐benzyl‐4,5‐dihydrooxazole) (C_s‐ and C₂‐ligands) produce isotactic poly(1‐oxo‐2‐phenylpropane‐1,3‐diyl) through copolymerization of styrene with carbon monoxide. However, the same meso‐catalyst in the presence of the free ligand leads to prevailingly syndiotactic growth of the copolymer, whereas the optically active catalyst, when used in the presence of the free enantiomeric ligand, gives an atactic copolymer.