Interaction of Fluorocarbon Containing Hydrophobically Modified Polyelectrolyte with Nonionic Surfactants

ＩｎｔｒｏｄｕｃｔｉｏｎＷａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓｈａｖｅｇａｉｎｅｄｃｏｎｓｉｄｅｒａｂｌｅａｔ ｔｅｎｔｉｏｎｉｎｔｈｅｐａｓｔｄｅｃａｄｅｓｂｅｃａｕｓｅｏｆｔｈｅｉｒｗｉｄｅｌｙｉｎｄｕｓ ｔｒｉａｌａｐｐｌｉｃａｔｉｏｎｓａｎｄｆｒｉｅｎｄｌｉｎｅｓｓｔｏｅｎｖｉｒｏｎｍｅｎｔ .1 3Ｅｓｐｅ ｃｉａｌｌｙｈｙｄｒｏｐｈｏｂｉｃａｌｌｙｍｏｄｉｆｉｅｄｗａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓ(ＨＭＷＳＰ)ｗｈｉｃｈｂｅａｒａｓｍａｌｌａｍｏｕｎｔｏｆｈｙｄｒｏｐｈｏｂｅｓｏｎｔ…     

Rheological properties of the aqueous solution for fluorocarbon‐containing hydrophobically modified sodium polyacrylic acid with various surfactants

The interaction of fluorocarbon‐ containing hydrophobically modified sodium polyacrylic acid (FMPAANa) (0.5 wt%) with various surfactants (anionic, nonionic and cationic) has been investigated by rheological measurements. Different rheological behaviors are displayed for ionic surfactants and nonionic surfactants. Fluorinated surfactants have stronger affinity with polyelectrolyte hydrophobes comparing with hydrogenated surfactants. The hydrophobic association of FMPAANa with a cationic surfactant (CTAB) and a fluorinated nonionic surfactant (FC171) is much stronger than with a nonionic surfactant (NP7. 5) and an anionic surfactant (FC143). Further investigation of the effects of temperature on solution properties shows that the dissociation energy E_m is correlated to the strength of the aggregated junctions.     

Interaction of Fluorocarbon Containing Hydrophobically Mdified Polyelectrolyte with Nonionic Surfactants

The interaction of fluorocarbon containing hydrophobically modified polyelectrolyte(FMPAANa) with two kinds of nonionic surfactants(hydrogenated and fluorinated)in a semidilute (0.5wt%) aqueous solution had been studied by rheological measurements,Association behavior was found in both systems.The hydrophobic interaction of FMPAANa with fluorinated surfactant(FC171) is much stronger than that with hydrogenated surfactant(NP7.5) at low surfactoant concentrations.The interaction is strengthened by surfactants being added for the density of active junctions increased.Whereas distinct phenomena for FC171 and NP7.5 start to be found as the surfactants added over their respective certain concentration.The interaction of polyelectrolyte with fluorinated surfactant increases dramatical ly while that with hydrogenated surfactant decreases.     

粘度法研究疏水改性聚丙烯酸与Np7.5的相互作用

研究了氟基团改性和氟碳、碳氢基团同时改性的聚丙烯酸（HM－PAA）以及参与聚合物（PAA）与非离子表面活性剂Np7.5分别在稀溶液和亚浓溶液下的相互作用对特性粘数和Brookfield表观粘度的影响。结果表明,PAA与Np7.5无明显作用,而M－PAA在Np7.5达到一定浓度后,由于Np7.5参与了疏水缔合,特性粘数和表观粘度发生了明显变化。稀溶液中,氟碳基团较多的聚合物出现了链构象的伸展。亚浓溶液中,疏水改性聚合物的粘度都有先上升后下降的变化,但氟碳含量较多的变化更强烈。     

Interaction of surfactant with antistatic polymer thin layers

Thin layers made from three kinds of hydrophilic polymer were coated onto poly(ethylene terephthalate)(PET) fibers to study the interaction of an anionic surfactant, sodiumn-dodecyl benzenesulfonate, with the polymer layers. The coated layers include a) poly(vinyl alcohol) (PVA) crosslinked with glutaraldehyde [nonionic], b) crosslinked, sulfated PVA [anionic], and c) polyethyleneimine crosslinked with poly(ethyleneglycol diglycidylether) [cationic]. All of these coatings were found to reduce the electrostatic charging of the PET cloths, indicating that they were effectively coated with the hydrophilic polymers. The PET cloth coated with the thin layers was immersed in the aqueous solution of surfactant at 40°C for different durations and the electrostatic voltage as well as the weight change were determined after drying. When the cloth coated with the nonionic or the anionic layer was brought into contact with the surfactant, neither the electrostatic voltage nor the weight of PET changed. On the contrary, immersion in the surfactant solution brought about an increase in both the electrostatic voltage and the weight for the PET coated with the cationic layer. This suggested that the surfactant molecules were bound to the cationic layer, in contrast to the nonionic and the anionic layer. It was concluded that the binding was due to ion complexing between the cationic groups in the polymeric layer and the sulfate groups in the surfactant molecules.     

Ultrathin films of variable polarity and crystallinity obtained from 1,2-polybutadiene nanoparticle dispersions

Characterization of ultrathin films of different polymer nanoparticles obtained at room temperature via spin-coating of aqueous dispersions and their morphology are described. Very small nanoparticles of semicrystalline 1,2-polybutadiene (PB), noncrystalline poly(1-butene) (PH), and poly(1-butenal) (PHF) were prepared via catalytic emulsion polymerization and subsequent hydrogenation or hydroformylation. The prefabricated nanoparticles were used as building blocks. The thin films obtained are continuous and transparent (n=1.5; κ=0). The properties of these films, formed from different constituents, are analyzed. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) images show that the PB-films are very smooth (rms roughness=10 nm) and polycrystalline. Recrystallization of these PB films reveals that edge-on lamellae are the constituent units. Films with very low roughness values (rms roughness <2 nm) are obtained with PH nanoparticles, due to the soft character of the nanoparticles. The AFM profile of the PHF films reveals that the surface remains structured after drying due to the high degree of the internal cross-linking that occurs in the nanoparticles. Quantification of the films' polarity (I(3)/I(1)=0.89, 1.3, and 2.1 for PHF, PB, and PH, respectively) agrees well with the previous values obtained for the polymer dispersions. Surfactant molecules are desorbed during the film formation; however, these aggregates can be removed by rinsing with water with no undesirable effects observed on the films.     

Improving Enzymatic Production of Ginsenoside Rh<Subscript>2</Subscript> from Rg<Subscript>3</Subscript> by using Nonionic Surfactant

In this study, several nonionic surfactants were tried to improve the enzymatic hydrolysis of ginsenoside Rg₃ into Rh₂ which was catalyzed at 50 °C and pH 5.0 by a crude glucosidase extracted from Fusarium sp. ECU2042. Among the biocompatible nonionic surfactants, polyethylene glycol 350 monomethyl ether was shown to be the best. After optimizing some influencing factors on the reaction, the conversion of Rg₃ (5 g/l) with 10 g/l crude enzyme reached almost 100% in the presence of the nonionic surfactant (7.5%, w/v), which was 25% higher than that in buffer without any surfactant. Furthermore, the enzyme stability was affected faintly by the surfactant.     

Determination of ethoxylated surfactants by functional fragments using group methods of analysis with a common reference compound

A method was proposed for the determination of an unknown nonionic surfactant; the method consists in the combination of two group methods: potentiometric titration with sodium tetraphenylborate (TPB) and UV spectrophotometry with the use of a common reference material. This allows the identification and quantitative determination of a nonionic surfactant without data on its molecular mass and the stoichiometry of its binding with TPB. The proposed method has less limitation than the use of only one method for the determination of the hydrophilic or hydrophobic fragment of the nonionic surfactant, which is used for the elucidation of the number of ethoxy groups in surfactant samples. The main performance characteristics of the procedures were estimated. Examples of the analysis of model and real materials, detergent solutions, and waste waters are given.     

Micellar Interactions in Nonionic/Ionic Mixed Surfactant Systems

To study the influence of the chemical nature of headgroups and the type of counterion on the process of micellization in mixed surfactant systems, the cmc's of several binary mixtures of surfactants with the same length of hydrocarbon tail but with different headgroups have been determined as a function of the monomer composition using surface tension measurements. Based on these results, the interaction parameter between the surfactant species in mixed micelles has been determined using the pseudophase separation model. Experiments were carried out with (a) the nonionic/anionic C(12)E(6)/SDS ((hexa(ethyleneglycol) mono-n-dodecyl ether)/(sodium dodecyl sulfate)), (b) amphoteric/anionic DDAO/SDS ((dodecyldimethylamine oxide)/(sodium dodecyl sulfate)), and (c) amphoteric/nonionic C(12)E(6)/DDAO mixed surfactant systems. In the case of the mixed surfactant systems containing DDAO, experiments were carried out at pH 2 and pH 8 where the surfactant was in the cationic and nonionic form, respectively. It was shown that the mixtures of the nonionic surfactants with different kinds of headgroups exhibit almost ideal behavior, whereas for the nonionic/ionic surfactant mixtures, significant deviations from ideal behavior (attractive interactions) have been found, suggesting binding between the head groups. Molecular orbital calculations confirmed the existence of the strong specific interaction between (1) SDS and nonionic and cationic forms of DDAO and between (2) C(12)E(6) and the cationic form of DDAO. In the case for the C(12)E(6)/SDS system, an alternative mechanism for the stabilization of mixed micelles was suggested, which involved the lowering in the free energy of the hydration layer. Copyright 2000 Academic Press.     

Structure and composition of cationic-nonionic surfactant mixed adsorbed layers on mica

The composition and morphology of mixed adsorbed layers comprising one of several poly(oxyethylene) alkyl ether nonionic surfactants, C(i)E(j), and two cationic surfactants-dodecyltrimethylammonium bromide (DTAB) and tetradecyltriethylammonium bromide (TTeAB)-at the mica/solution interface have been studied using depletion adsorption and atomic force microscopy. The nonionic surfactants do not themselves adsorb onto mica, but can coadsorb with a cationic surfactant. The extent of their hydrophobic association with the adsorbed cationic surfactant depends on alkyl chain length, while the adsorbed layer morphologies are sensitive to the number of ethoxy groups. Nonionic surfactants with headgroups containing less than eight ethylene oxide units decrease the adsorbed aggregate curvature, gradually transforming globular TTeAB or cylindrical DTAB adsorbed aggregates into a rod, mesh, or bilayer structure. Those with larger headgroups favor globular aggregates. The mechanism by which the nonionic surfactant modifies the adsorbed morphology is the formation of defects in the form of cylinder end-caps or branch-points, leading to adsorbed layer compositions that differ from ideal mixing predictions. All mixed adsorbed films become saturated with the nonionic component when the capacity of the aqueous side of the adsorbed layer is reached.     

Calorimetric study on the temperature dependence of the formation of mixed ionic/nonionic micelles

The differential excess enthalpy of mixed micelle formation was measured at different temperatures by mixing nonionic hexa(ethylene glycol) mono n-dodecyl ether with anionic sodium dodecyl sulfate or cationic dodecylpyridinium chloride. The experimental data were obtained calorimetrically by titrating a concentrated surfactant solution into a micellar solution of nonionic surfactant. The composition and the size of the mixed nonionic/ionic micelles at different surfactant concentrations were also determined. Pronounced differences in both composition and excess enthalpy were found between the anionic and the cationic mixed system. For both systems, the excess enthalpies become more exothermic with increasing temperature, but for the anionic mixed system an additional exothermic contribution was found which was much less temperature dependent. Temperature dependence of the excess enthalpy was attributed to the effect of the ionic headgroup on the hydration of the ethylene oxide (EO) groups in the mixed corona. Ionic headgroups located in the ethylene oxide layer cause the dehydration of the EO chains resulting in an additional hydrophobic contribution to the enthalpy of mixing. A high affinity of sodium dodecyl sulfate for nonionic micelles and an extra exothermic and less temperature dependent contribution to the excess enthalpy found for the SDS-C(12)E(6) system might be attributed to specific interactions (hydrogen bonds) between the sulfate headgroup and the partly dehydrated EO chain.     

Fluorescence Spectroscopic Study for Interaction of Pyrene-Labeled Poly(2-acrylamido-2-methylpropane Sulfonates)s Bearing Octadecyl Group with Nonionic Surfactant Molecules

The interactions of the hydrophobically random-modified and end-capped polyanions with a nonionic surfactant were investigated by fluorescence spectroscopy of the labeled Py in the polyanions. The results revealed that the complex formation between these polyanions and the nonionic surfactant took place with two steps; the first step is the insertion of the surfactant molecules into hydrophobic microdomains formed from the polyanions, and the second step is the disruption of the hydrophobic microdomains due to binding the surfactant molecules to the hydrophobic groups of the polyanions. The position of the hydrophobic groups covalently introduced in the polyanions affects the polyanion-surfactant complex formation.     

Foaming and foam stability for mixed polymer-surfactant solutions: effects of surfactant type and polymer charge

Solutions of surfactant-polymer mixtures often exhibit different foaming properties, compared to the solutions of the individual components, due to the strong tendency for formation of polymer-surfactant complexes in the bulk and on the surface of the mixed solutions. A generally shared view in the literature is that electrostatic interactions govern the formation of these complexes, for example between anionic surfactants and cationic polymers. In this study we combine foam tests with model experiments to evaluate and explain the effect of several polymer-surfactant mixtures on the foaminess and foam stability of the respective solutions. Anionic, cationic, and nonionic surfactants (SDS, C(12)TAB, and C(12)EO(23)) were studied to clarify the role of surfactant charge. Highly hydrophilic cationic and nonionic polymers (polyvinylamine and polyvinylformamide, respectivey) were chosen to eliminate the (more trivial) effect of direct hydrophobic interactions between the surfactant tails and the hydrophobic regions on the polymer chains. Our experiments showed clearly that the presence of opposite charges is not a necessary condition for boosting the foaminess and foam stability in the surfactant-polymer mixtures studied. Clear foam boosting (synergistic) effects were observed in the mixtures of cationic surfactant and cationic polymer, cationic surfactant and nonionic polymer, and anionic surfactant and nonionic polymer. The mixtures of anionic surfactant and cationic polymer showed improved foam stability, however, the foaminess was strongly reduced, as compared to the surfactant solutions without polymer. No significant synergistic or antagonistic effects were observed for the mixture of nonionic surfactant (with low critical micelle concentration) and nonionic polymer. The results from the model experiments allowed us to explain the observed trends by the different adsorption dynamics and complex formation pattern in the systems studied.     

Removal of aromatic compounds in the aqueous solution via micellar enhanced ultrafiltration: Part 1. Behavior of nonionic surfactants

The effects of nonionic surfactants having different hydrophilicity and membranes having different hydrophobicity and molecular weight cut-off on the performance of micellar-enhanced ultrafiltration (MEUF) process were examined. A homologous series of polyethyleneglycol (PEG) alkylether having different numbers of methylene groups and ethylene oxide groups was used for nonionic surfactants. Polysulfone membranes and cellulose acetate membranes having different molecular cut-off were used for hydrophobic membranes and hydrophilic membranes, respectively. The concentration of surfactant added to pure water was fixed at the value of 100 times of critical micelle concentration (CMC). The flux through polysulfone membranes decreased remarkably due to adsorption mainly caused by hydrophobic interactions between surfactant and membrane material. The decline of solution flux for cellulose acetate membranes was not as serious as that for polysulfone membranes because of hydrophilic properties of cellulose acetate membranes. The surfactant rejections for the cellulose acetate membranes increased with decreasing membrane pore size and with increasing the hydrophobicity of surfactant. On the other hand the surfactant rejections for polysulfone membranes showed totally different rejection trends with those for cellulose acetate membranes. The surfactant rejections for the polysulfone membranes depend on the strength of hydrophobic interactions between surfactant and membrane material and molecular weight of surfactants.     

Effect of surfactant type on surfactant-maltodextrin interactions: isothermal titration calorimetry, surface tensiometry, and ultrasonic velocimetry study

Isothermal titration calorimetry (ITC), surface tensiometry, and ultrasonic velocimetry were used to characterize surfactant-maltodextrin interactions in buffer solutions (pH 7.0, 10 mM NaCl, 20 mM Trizma base, 30.0 degrees C). Experiments were carried out using three surfactants with similar nonpolar tail groups (C12) but different charged headgroups: anionic (sodium dodecyl sulfate, SDS), cationic (dodecyl trimethylammonium bromide, DTAB), and nonionic (polyoxyethylene 23 lauryl ether, Brij35). All three surfactants bound to maltodextrin, with the binding characteristics depending on whether the surfactant headgroup was ionic or nonionic. The amounts of surfactant bound to 0.5% w/v maltodextrin (DE 5) at saturation were < 0.3 mM Brij35, approximately 1-1.6 mM SDS, and approximately 1.5 mM DTAB. ITC measurements indicated that surfactant binding to maltodextrin was exothermic. Surface tension measurements indicated that the DTAB-maltodextrin complex was more surface active than DTAB alone but that SDS- and Brij35- maltodextrin complexes were less surface active than the surfactants alone.     

添加剂对非离子十二烷基聚氧乙烯聚氧丙烯醚浊点的影响

测定了无机盐、单元及多元醇、有机酸及离子型表面活性剂对3种非离子表面活性剂十二烷基聚氧乙烯聚氧丙烯醚C₁₂H₂₅(EO)_m(PO)_nH(LS₃₆,m=3,n=6;LS45,m=4,n=5;LS54,m=5,n=4)浊点的影响.     

Pseudo-homogeneous micelle extraction of ion-associates formed between tetrabutylammonium ion and some aromatic sulfonate ions into nonionic surfactant micelle studied through the mobility measurements in capillary zone electrophoresis

Ion-association extraction of some aromatic sulfonate ions including alkylbenzene sulfonates with tetrabutylammonium ion (TBA+) into nonionic surfactant micelle has been investigated through the changes in the electrophoretic mobility. Nonionic surfactants of Brij 35 and Brij 58 were used as micelle substrates to which the ion-associates formed could distribute. The electrophoretic mobility of the aromatic sulfonate ions was measured by capillary zone electrophoresis in the presence of TBA+ and/or the nonionic surfactant to determine ion-association constants (K(ass)), binding constants of the anions to the nonionic surfactant micelle (K(B)), and binding constants of the ion-associates to the nonionic surfactant micelle (K(B,IA)). Nonlinear phenomena induced with the alkyl chain moiety were observed on K(ass) and K(B) by its linear structure and the mixed micelle formation, respectively. Larger K(B) values were obtained with Brij 58 as micelle matrix than with Brij 35, while the differences in K(B,IA) were small between Brij 58 and Brij 35.     

Water solubilization capacity of mixed reverse micelles: effect of surfactant component, the nature of the oil, and electrolyte concentration

Solubilization of water in mixed reverse micellar systems with anionic surfactant (AOT) and nonionic surfactants (Brijs, Spans, Tweens, Igepal CO 520), cationic surfactant (DDAB)-nonionic surfactants (Brijs, Spans, Igepal CO 520), and nonionic (Igepal CO 520)-nonionics (Brijs, Spans) in oils of different chemical structures and physical properties (isopropyl myristate, isobutyl benzene, cyclohexane) has been studied at 303 K. The enhancement in water solubilization has been evidenced in these systems with some exceptions. The maximum water solubilization capacity (omega(0,max)) in mixed reverse micellar systems occurred at a certain mole fraction of a nonionic surfactant, which is indicated as X(nonionic,max). The addition of electrolyte (NaCl or NaBr) in these systems tends to enhance their solubilization capacities further both at a fixed composition of nonionic (X(nonionic); 0.1) and at X(nonionic,max) at 303 K. The maximum in solubilization capacity of electrolyte (omega(max)) was obtained at an optimal electrolyte concentration (designated as [NaCl](max) or [NaBr](max)). All these parameters, omega(0,max) vis-a-vis X(nonionic,max) and omega(max) vis-a-vis [NaCl](max), have been found to be dependent on the surfactant component (content, EO chains, and configuration of the polar head group, and the hydrocarbon moiety of the nonionic surfactants) and type of oils. The conductance behavior of these systems has also been investigated, focusing on the influences of water content (omega), content of nonionics (X(nonionic)), concentration of electrolyte ([NaCl] or [NaBr]), and oil. Percolation of conductance has been observed in some of these systems and explained by considering the influences of the variables on the rigidity of the oil/water interface and attractive interactions of the surfactant aggregates. Percolation zones have been depicted in the solubilization capacity vs X(nonionic) or [electrolyte] curves in order to correlate with maximum in water or electrolyte solubilization capacity. The overall results, obtained in these studies, have been interpreted in terms of the model proposed by Shah and co-workers for the solubility of water in water-in-oil microemulsions, as their model proposed that the two main effects that determine the solubility of these systems are curvature of the surfactant film separating the oil and water and interactions between water droplets.     

New Modified Electrodes for the Separate Determination of Polyoxyethylated Nonylphenols

Electrochemical systems and ionophore compositions for solid-state nonionic surfactant-selective electrodes (NS-SEs) were proposed. The main electrochemical and performance characteristics of nonionic surfactant sensors were determined. It was demonstrated that surfaces of NS sensors can be modified with polyvinyl chloride molecular sieves. It was found that the modified electrodes provide the separate determination of polyoxyethylated nonylphenols differing in the number of oxyethyl groups.     

Mutual interactions between nonionic surfactants and gelatin — investigations in cubic liquid crystalline systems and micellar systems

The mutual interactions between nonionic surfactants such as polyoxyethylene cetyl ethers (C₁₆EO _n ,n=15, 20) especially their cubic lyotropic liquid crystalline phases of typeI ₁ and polymer gelatin were investigated. The colloidal microstructure of such anI ₁-phase consisting of close-packed globular surfactant aggregates was shown by transmission electron microscopy (TEM). The diameter of the globules found by TEM correlated well with the periodic distance of about 7.5 nm obtained by small angle x-ray diffraction (SAXD). In ternary systems consisting of surfactant, gelatin, and water cubic liquid crystalline structures were also proved by polarized light microscopy, TEM, and SAXD. The polymer did not participate in the cubic structure but formed, at least in part, anisotropic spherulites. In diluted surfactant systems however, interactions between polymer and surfactants were clearly found by polarimetry. The nonionic surfactants caused an accelerated coil-helix transition of the polypeptid gelatin.