Electrochemically Induced Synthesis of Poly(2,6‐carbazole)

The formation of a poly(2,6‐carbazole) derivative during an electrochemical polymerization process is shown. Comparison of 3,5‐bis(9‐octyl‐9H‐carbazol‐2‐yl)pyridine and 3,5‐bis(9‐octyl‐9H‐carbazol‐3‐yl)pyridine by electrochemical and UV–Vis‐NIR spectroelectrochemical measurements and DFT (density functional theory) calculation prove the formation of a poly(2,6‐carbazole) derivative. Both of the compounds form stable and electroactive conjugated polymers.

     

A novel low‐bandgap conjugated polymer based on Ru(II) bis(acetylide) complex and BODIPY moieties

A novel conjugated polymer P‐1 incorporating Ru(II) bis(acetylide) complex and borondipyrromethene (BODIPY) moieties in the main chain was synthesized by Pd‐catalyzed Sonogashira coupling reaction of diethynyl substituted BODIPY derivative ( M‐1 ) and Ru(II) bis(acetylide) complex ( M‐2 ), and the reference polymer P‐2 was obtained from the same method as preparation of P‐1 . Compared with P‐2 , Ru(II)‐containing polymer P‐1 shows low‐bandgap as 0.87 eV from cyclic voltammetry, and obvious redshifts in both UV–vis absorption and fluorescence spectra. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1686–1692     

High‐performance amorphous donor–acceptor conjugated polymers containing x‐shaped anthracene‐based monomer and 2,5‐bis(2‐octyldodecyl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione for organic thin‐film transistors

New diketopyrrolopyrrole (DPP)‐containing amorphous conjugated polymers, such as poly(3‐(5‐((9,10‐bis((4‐hexylphenyl)ethynyl)‐6‐(prop‐1‐ynyl)anthracen‐2‐yl)ethynyl) thiophen‐2‐yl)‐5‐(2‐hexyldecyl)‐2‐(2‐octyldodecyl)‐6‐(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 4 ), and poly(3‐(5‐((2,6‐bis((4‐hexylphenyl)ethynyl)‐10‐(prop‐1‐ynyl)anthracen‐9‐yl)ethynyl)thiophen‐2‐yl)‐2,5‐bis(2‐octyldodecyl)‐6‐(thio phen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 7 ), were successfully synthesized via Sonogashira coupling reactions under microwave conditions. Copolymer 7 , incorporating a DPP moiety at the 9,10‐position of the anthracene ring through a triple bond, showed a much lower bandgap energy (E_g = 1.81 eV) than copolymer 4 (E_g = 2.13 eV). Tuning of the molecular frontier orbital energies was achieved by only changing the anchoring position of dithiophenyl‐DPP from the 2,6‐ to the 9,10‐position in the anthracene ring. Because of the donor–acceptor (D–A) interaction and the two‐dimensional planar structure of the X‐shaped donor monomer, the resulting polymers showed good interchain π?π stacking in the thin‐film state, despite being amorphous polymers. When the newly synthesized polymer 7 was used as a semiconductor material in an organic thin‐film transistor, the best mobility of up to 0.12 cm² V^?1 s^?1 (I_on/off = ～ 4.4 × 10⁶) was observed, which is one of the highest values recorded for amorphous polymer films reported to date. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Poly((2‐alkylbenzo[1,2,3]triazole‐4,7‐diyl)vinylene)s for organic solar cells

Poly((2‐Alkylbenzo[1,2,3]triazole‐4,7‐diyl)vinylene)s (pBTzVs) synthesized by Stille coupling show different absorption spectra, solid‐state morphology, and photovoltaic performance, depending on straight‐chain versus branched‐chain (pBTzV12 and pBTzV20) pendant substitution. Periodic boundary condition density functional computations show limited alkyl pendant effects on isolated chain electronic properties; however, pendants could influence polymer backbone conjugative planarity and polymer solid film packing. The polymers are electronically ambipolar, with best performance by pBTzV12 with hole and electron transport mobilities of 4.86 × 10^?6 and 1.96 × 10^?6 cm² V^?1 s^?1, respectively. pBTzV12 gives a smooth film morphology, whereas pBTzV20 gives a very different fibrillar morphology. For ITO/PEDOT:PSS/(1:1 w/w polymer:PC₇₁BM)/LiF/Al devices, pBTzV12 gives power conversion efficiency (PCE) up to 2.87%, and pBTzV20 gives up to PCE = 1.40%; both have open‐circuit voltages of V_OC = 0.6–0.7 V. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1539–1545     

Poly(phenylene vinylene)‐based copolymers containing 3,7‐phenothiazylene and 2,6‐pyridylene chromophores: Fluorescence sensors for acids,metal ions,and oxidation

A novel copolymer, poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐2,6‐pyridylene‐1,2‐ethenylene) ( P3 ), containing N‐hexyl‐3,7‐phenothiazylene and 2,6‐pyridylene chromophores was synthesized to investigate the effect of protonation, metal complexation, and chemical oxidation on its absorption and photoluminescence (PL). Poly(N‐hexyl‐3,8‐iminodibenzyl‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) and poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) ( P2 ), consisting of 1,3‐divinylbenzene alternated with N‐hexyl‐3,8‐iminodibenzyl and N‐hexyl‐3,7‐phenothiazylene, respectively, were also prepared for comparison. Electrochemical investigations revealed that P3 exhibited lower band gaps (2.34 eV) due to alternating donor and acceptor conjugated units (push–pull structure). The absorption and PL spectral variations of P3 were easily manipulated by protonation, metal chelation, and chemical oxidation. P3 displayed significant bathochromic shifts when protonated with trifluoroacetic acid in chloroform. The complexation of P3 with Fe³⁺ led to a significant absorption change and fluorescence quenching, and this implied the coordination of ferric ions with the 2,6‐pyridylene groups in the backbone. Moreover, both phenothiazylene‐containing P2 and P3 showed conspicuous PL quenching with a slight redshift when oxidized with NOBF₄. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1272–1284, 2004     

Oxidation polymerization of a charge‐transfer complex of 2,6‐bis(2‐thienyl)‐1,4‐dithiafulvene with 7,7,8,8‐tetracyanoquinodimethane

A π‐conjugated poly(α‐dithienylen‐dithiafulvene) ( 2 ) was obtained by the oxidation polymerization of 2,6‐bis(2‐thienyl)‐1,4‐dithiafulvene ( 1 ) as a dithiafulvene monomer derived from 4‐(2‐thienyl)‐1,2,3‐thiadiazole. When a solution of 1 in CHCl₃ was added to a stirred solution of FeCl₃ in CHCl₃, only the low‐molecular‐weight product 2 was obtained. The mixture was stirred for 15 h with an N₂ flow. The polymerization at higher temperatures resulted in polymers with large insoluble fractions. A higher molecular weight polymer was obtained by the oxidation polymerization of a charge‐transfer complex of 1 with 7,7,8,8‐tetracyanoquinodimethane (compound 3 ). In contrast to 2 , polymer 4 was readily soluble in dimethyl sulfoxide, dimethylformamide, and acetone and partially soluble in tetrahydrofuran and methanol and had a larger molecular weight (peak top molecular weight = 37,000). The conductivity of polymer 4 was 3 orders of magnitude larger than that of polymer 2 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6592–6598, 2005     

Preparation of Poly(3,4‐ethylenedioxythiophene) in a Chiral Nematic Liquid‐Crystal Field

Summary: The 3,4‐ethylenedioxythiophene (EDOT) monomer in a chiral nematic liquid‐crystal electrolyte was polymerized by application of a voltage to yield a thin film. Circular dichroism measurements indicated a Cotton effect for the film. Optical texture suggests that the polymer shows a finger‐print texture and a spiral texture similar to that of the chiral nematic phase. This simple method provides a new technique for preparing chiral conducting films in a thermotropic chiral liquid‐crystal field.

Optical micrograph of (R)‐PEDOT* (no polarizer).     

Poly(2‐ethyl‐2‐oxazoline) as Alternative for the Stealth Polymer Poly(ethylene glycol): Comparison of in vitro Cytotoxicity and Hemocompatibility

Limitations of PEG in drug delivery have been reported from clinical trials. PEtOx (0.4–40 kDa) as alternative is synthesized by a living, microwave‐assisted polymerization, and is directly compared to PEG of similar molar mass regarding cytotoxicity and hemocompatibility. In short‐term treatments, both types of polymers are well tolerated even at high concentrations. Moderate concentration and molar mass dependent cytotoxic effects occurred only after long‐term incubation at concentrations higher than therapeutic doses. PEtOx possesses not only an easy route of synthesis and beneficial physicochemical characteristics such as low viscosity and high stability, which are advantageous over PEG, but additionally in vitro toxicology comparable to PEG.

     

Synthesis and photovoltaic properties of 2,6‐bis(2‐thienyl) benzobisazole and 4,8‐bis(thienyl)‐benzo[1,2‐B:4,5‐B′]dithiophene copolymers

In an effort to design efficient low‐cost polymers for use in organic photovoltaic cells the easily prepared donor–acceptor–donor triad of a either cis‐benzobisoxazole, trans‐benzobisoxazole or trans‐benzobisthiazole flanked by two thiophene rings was combined with the electron‐rich 4,8‐bis(5‐(2‐ethylhexyl)‐thien‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene. The electrochemical, optical, morphological, charge transport, and photovoltaic properties of the resulting terpolymers were investigated. Although the polymers differed in the arrangement and/or nature of the chalcogens, they all had similar highest occupied molecular orbital energy levels (?5.2 to ?5.3 eV) and optical band gaps (2.1–2.2 eV). However, the lowest unoccupied molecular orbital energy levels ranged from ?3.1 to ?3.5 eV. When the polymers were used as electron donors in bulk heterojunction photovoltaic devices with PC₇₁BM ([6,6]‐phenyl C₇₁‐butyric acid methyl ester) as the acceptor, the trans‐benzobisoxazole polymer had the best performance with a power conversion efficiency of 2.8%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 316–324     

Poly(p‐phenylene iminoborane): A Boron–Nitrogen Analogue of Poly(p‐phenylene vinylene)

Substitution of selected CC units in π‐conjugated organic frameworks by their isoelectronic and isosteric BN units (BN/CC isosterism) has proven to be a successful concept for the development of BN‐doped polycyclic aromatic hydrocarbons (PAHs) with intriguing properties and functions. The first examples have just demonstrated the applicability of this approach to polymer chemistry. Herein, we present the synthesis and comprehensive characterization of the first poly(p‐phenylene iminoborane). This novel inorganic–organic hybrid polymer can be regarded as a BN analogue of the well‐known poly(p‐phenylene vinylene) (PPV). Photophysical investigations on the polymer and a series of model oligomers provide clear evidence of some π‐conjugation across the B=N bonds and extension of the conjugation path with increasing chain length. TD‐DFT calculations provide deeper insight into the electronic structure of the new materials.     

Synthesis of π‐conjugated poly(dithiafulvene) by cycloaddition polymerization of aldothioketene from a bis(1,2,3‐thiadiazole) monomer

A π‐conjugated poly(dithiafulvene) ( 2 ) was obtained by the cycloaddition polymerization of aldothioketene with its alkynethiol tautomer derived from 1,4‐bis(1,2,3‐thiadiazolyl‐4‐yl)benzene ( 1 ) in a 94% yield. To a mixure of 1 and dimethyl sulfoxide (DMSO)/ethanol (5/1, v/v), KOH was added. After stirring the mixture overnight, piperidine was added to quench the terminal thioketenes. The reaction mixture was then poured into water to obtain the product. The cycloaddition polymerization of aldothioketene derived from 1 with its alkynethiol tautomer was studied under various conditions in several solvent systems. The structure of the polymer was supported by the ¹H NMR and ¹³C NMR spectra. The number‐average degree of polymerization (DP) of 2 was 8, estimated from the ¹H NMR analysis. Optical properties and electrochemical analysis of 2 were also studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5872–5876, 2004     

A New Poly(2,7‐Dibenzosilole) Derivative in Polymer Solar Cells

A new soluble conjugated copolymer based on 2,7‐dibenzosilole and 4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole units has been synthesized (PBSDTBT). Bulk heterojunction solar cell devices are fabricated using this material as the donor and [6,6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) as the acceptor. The power conversion efficiency is 1.6% under AM1.5 illumination. This material also shows a good V_OC (0.97 V). The results are quite promising considering the relatively large bandgap (1.9 eV) of this polymer.

     

Synthesis and properties of blue light‐emitting,silicon‐containing,regio‐ and stereoregular conjugated polymers

This article concerns the hydrosilylation polyaddition of 1,4‐bis(dimethylsilyl)benzene ( 1 ) with 4,4′‐diethynylbiphenyl, 2,7‐diethynylfluorene ( 2b ), and 2,6‐diethynylnaphthalene with RhI(PPh₃)₃ catalyst. Trans‐rich polymers with weight‐average molecular weights (M_w's) ranging from 19,000 to 25,000 were obtained by polyaddition in o‐Cl₂C₆H₄ at 150–180 °C, whereas cis‐rich polymers with M_w's from 4300 to 34,000 were obtained in toluene at 0 °C–r.t. These polymers emitted blue light in 4–81% quantum yields. The cis polymers isomerized into trans polymers upon UV irradiation, whereas the trans polymers did not. The device having a layer of polymer trans‐ 3b obtained from 1 and 2b demonstrated electroluminescence without any dopant. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2774–2783, 2004     

High‐performance fluorine‐containing BDT‐based copolymer for organic solar cells with a high open circuit voltage

A new donor–acceptor (D‐A) conjugated copolymer (PBDTT(ff)‐ttTPD) based on fluorine‐substituted benzodithiophene (BDT) and 6‐alkylthienothienyl thieno[3,4‐c]pyrrole‐4,6‐dione (ttTPD) has been synthesized via a Stille cross‐coupling reaction. As a control, the nonfluorinated BDT‐based ttTPD copolymer (PBDTT‐ttTPD) was also synthesized by using the same polymerization method. The number‐average molecular weights (M _n) of PBDTT(ff)‐ttTPD and PBDTT‐ttTPD were found to be 48,000 g/mol (? = 2.2) and 43,000 g/mol (? = 2.1), respectively. The HOMO levels of PBDTT(ff)‐ttTPD and PBDTT‐ttTPD were calculated to be ?5.65 and ?5.45 eV, respectively. The inclusion of fluorinated BDT units is a very effective approach to lowering the polymer's HOMO level. The SCLC mobilities of PBDTT(ff)‐ttTPD and PBDTT‐ttTPD were determined to be 5.9 × 10^?4 and 3.0 × 10^?4 cm²/Vs, respectively. Polymer solar cell devices prepared with PBDTT(ff)‐ttTPD and PBDTT‐ttTPD as their active layers were found to exhibit power conversion efficiencies of 7.45 and 6.79% with open circuit voltages of 0.98 and 0.84 V, respectively. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2506–2512     

A Poly(3,4‐ethylenedioxypyrrole)–Au@WO3‐Based Electrochromic Pseudocapacitor

A poly(3,4‐ethylenedioxypyrrole)–gold nanoparticle (Au)–tungsten oxide (PEDOP–Au@WO₃) electrochromic supercapacitor electrode capable of optically modulating solar energy while simultaneously storing/releasing energy (in the form of charge) was fabricated for the first time. WO₃ fibers, 50 to 200 nm long and 20 to 60 nm wide, were synthesized by a hydrothermal route and were electrophoretically deposited on a conducting substrate. Au nanoparticles and PEDOP were coated over WO₃ to yield the PEDOP–Au@WO₃ hybrid electrode. The inclusion of Au in the hybrid was confirmed by X‐ray diffraction, Raman spectroscopy, and energy‐dispersive X‐ray analyses. The nanoscale electronic conductivity, coloration efficiency, and transmission contrast of the hybrid were found to be significantly greater than those of pristine WO₃ and PEDOP. The hybrid showed a high specific discharge capacitance of 130 F g^?1 during coloration, which was four and ten times greater than the capacitance achieved in WO₃ or PEDOP, respectively. We also demonstrate the ability of the PEDOP–Au@WO₃ hybrid, relative to pristine PEDOP, to perform as a superior counter electrode in a solar cell, which is attributed to a higher work function. The capacitance and redox switching capability of the hybrid decreases insignificantly with cycling, thus establishing the viability of this multifunction hybrid for next‐generation sustainable devices such as electrochromic psuedocapacitors because it can concurrently conserve and store energy.     

Benzodithiophene‐based poly(aryleneethynylene)s: Synthesis,optical properties,and applications in organic solar cells

The synthesis and characterization of building block of ethynylene‐substituted benzo[1,2‐b:4,5‐b′]dithiophene (BDT), and its application in the construction of poly(aryleneethynylene)s (PAEs) are described in this article. Alkoxy‐substituted BDT and thiazolothiazole are selected as the other copolymerized units, and polymers of PEBBDT and PEBTTZ were synthesized by Pd‐catalyzed Sonogashira coupling reaction. These polymers showed intense interchain π–π interaction and deep HOMO levels (≤ ?5.50 eV). Bulk heterojunction solar cell fabricated using PEBBDT or PEBTTZ as electron donor and PC₆₁BM as acceptor display power conversion efficiency of 0.85 and 2.40%, respectively, under the illumination of AM1.5G, 100 mW cm^?2. This study shows good prospect for the application of PAEs‐type polymers in organic solar cell. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 208–215     

Poly(amidoamine)s with 2‐Dithiopyridine Side Substituents as Intermediates to Peptide–Polymer Conjugates

Cystamine, when employed as a cross‐linking agent, leads to poly(amidoamine) networks, which on reaction with 2,2′‐dithiodipyridine turn into linear poly(amidoamine)s with side dithiopyridyl groups that easily undergo exchange reactions with reduced L ‐glutathione, a model thiol‐containing biologically active peptide. The resultant products represent the first examples of soluble poly(amidoamine)–peptide conjugates in which the peptide moieties are linked to the polymer chain by S S bonds stable in blood, but cleavable inside cells.