Polymerization of ϵ-caprolactone using heterobimetallic lanthanocene complexes

The chiral heterobimetallic complexes Li[Ln(η⁵ : η¹-C₅R₄¹SiMe₂NCH₂CH₂R²)₂] (Ln = Y, Lu; C₅R₄¹ = C₅Me₄, C₅H₄, 3-C₅H₃ t Bu; R² = OMe, NMe₂; Me: methyl; tBu: tert-butyl) have been found to polymerize ϵ-caprolactone to give a polymer of high molecular weight (M̄_n < 20 000) and moderate polydispersity (M̄_w/M̄_n < 2.0). Failure to observe a correlation between monomer/initiator ratio and molecular weight suggests a polymerization mechanism different from a pseudo-anionic mechanism.     

Effect of tetraalkylammonium salts on the tacticity of poly(methyl methacrylate), 2.. Initiation by potassium tert-butoxide

The anionic polymerization of methyl methacrylate was carried out in the presence of potassium tert-butoxide (t-BuOK)/quaternary ammonium salts (QAS) in toluene and tetrahydrofuran at −60°C. It was found that in toluene some QAS additives substantially increase the syndiotacticity of poly(methyl methacrylate). Two types of QAS were distinguished, quite different in their action. The addition of QAS with one or two longchain alkyl groups (>C₁₂), does not change significantly the mode of the monomer addition, whereas the polymerization in the presence of tetraalkylammonium salts with four equal substituents and dimethyldidodecylammonium bromide yields predominantly a syndiotactic polymer with high conversion and comparatively low polydispersity (M̄_w/M̄_w = 1.3−1.5). In some cases QAS additives are more effective modifiers than cryptand [2.2.2].     

Effect of a π-donor on the radical bulk polymerization of methyl methacrylate

Bulk polymerizations of methyl methacrylate (MMA) at 60°C initiated with 2,2′-azoisobutyronitrile are influenced by the presence of an organic π-donor such as tetrathiafulvalene (TTF). Upon addition of TTF, the ratio of weight- to number-average molecular weights M̄_w/M̄_n are significantly reduced and the thermal stability of the poly(methyl methacrylate) samples is increased. Kinetic investigations indicate that TTF acts as a retarder on the polymerization mechanism.     

Synthesis of Styrenic‐Terminated Methacrylate Macromonomers by Nitroanion‐Initiated Living Anionic Polymerization

N‐Isopropyl‐4‐vinylbenzylamine (PVBA) was synthesized and used as an initiator for the polymerization of methacrylates to synthesize macromonomers with terminal styrenic moieties. LiPVBA initiated a living polymerization and block copolymerization of methyl methacrylate, 2‐(N,N‐dimethylamino)ethyl methacrylate and tert‐butyl methacrylate and produced polymers having well‐controlled molecular weights and very low polydispersities (M̄_w/M̄_n < 1.1) in quantitative yield. ¹H NMR analysis revealed that the polymers contained terminal 4‐vinylbenzyl groups. The macromonomers were reactive in the copolymerization with styrene.     

A new method for the polymerization of methyl methacrylate

Dialkyl iodomethylmalonates in the presence of tetrabutylammonium iodide initiate the polymerization of methyl methacrylate, but not of methyl acrylate or acrylonitrile. Typically, at 60°C in 1,3-dimethyltetrahydro-2-1H-pyrimidone (DMPU) as the solvent, poly(methyl methacrylate (PMMA)) is obtained in the number-average molecular weight range of 2 000 to 8 000, the molecular weight distribution being fairly narrow (ratio of weight- to number-average molecular weights M̄_w/M̄_n 1.2–1.3).     

Narrow-polydispersity polystyrene/poly[styrene-co-(butyl methacrylate)] block copolymers by an N-oxyl mediated free radical polymerization process

Polystyrene/poly[styrene-co-(butyl methacrylate)] block copolymers with controlled molecular weights and with polydispersities generally below M̄_w/M̄_n = 1,45 and partially as low as M̄_w/M̄_n = 1,19 were synthesized by a free radical bulk copolymerization using a 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)-capped polystyrene macroinitiator. The influence of the macroinitiator concentration on the block copolymerization was studied. The polymerization rates are independent of the macroinitiator concentration and are close to that of thermally self-initiated styrene/butyl methacrylate copolymerizations showing the important role of self-initiation for N-oxyl mediated free radical polymerizations.     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.     

Anionic polymerization of methyl methacrylate initiated with lithium diphenylamide (Ph2NLi) in the presence of divalent transition metal halide

Anionic polymerization of methyl methacrylate (MMA) in the presence of divalent transition metal halide (MX₂ = FeBr₂, MnCl₂, CoCl₂, NiBr₂) was investigated. Initiating systems with various combinations of MX₂, lithium diphenylamide (Ph₂NLi), and organolithium (RLi, where R = nBu, Me) were effective to giving a high yield of poly(methyl methacrylate)s (PMMAs) at ?78 °C in toluene. The tacticity of the resulting PMMAs was highly dependent on the combination of the reagents used for the generation of the initiating systems within a syndiotactic (rr = 59%) to isotactic (mm = 65%) range. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 31–37, 2004     

Living radical polymerization of methyl methacrylate with a zerovalent nickel complex,Ni(PPh3)

A zerovalent nickel complex, Ni(PPh₃)₄, induced living radical polymerization of methyl methacrylate (MMA) in conjunction with an organic bromide as an initiator [R–Br: CCl₃Br, (CH₃)₂C(CO₂Et)Br, (CH₃)₂C(COPh)Br] in the presence of Al(Oi-Pr)₃ additive. The molecular weight distributions were narrow (M̄_w/M̄_n ∼ 1.2) throughout the reactions, and the number-average molecular weights (M̄_n) increased in direct proportion to monomer conversion. In contrast, the polymers obtained with CCl₄ in place of R–Br had broader MWDs (M̄_w/M̄_n > 2). The Al(Oi-Pr)₃ additive should be added for the smooth polymerizations of MMA to occur, similarly to those with a divalent nickel bromide, NiBr₂(PPh₃)₂. The Ni(PPh₃)₄-mediated living polymerization apparently proceeds via the activation of the C Br bond from the initiators R Br, assisted by the redox reaction of the complex between Ni(0) and Ni(I) species. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3003–3009, 1999     

Polymerization of MMA catalyzed by different novel mixed ligand lanthanocene{(Cp)(Cl) LnSchiff-base (THF)},(COT) -Ln(methoxyethylindenyl)(THF) /Al (i -Bu)_3 systems

This article deals that the rare earth metal complexes along with Al(i'-Bu),can catalyze the polymerization of methyl-methacrylate (MMA) into high molecular weight poly(MMA) along with narrow molecular weight distributions (MWD).A typical example was mentioned in the case of {Cp(Cl) Sm-Schiff-base(THF)} which expresses maximum (conv.% = 55.46 and Mn=354×103) efficiency along with narrow MWD (Mw/Mn<2) at 60℃.The resulting polymer was partially syndiotactic (>60%).The effect of the catalyst,temperature,catalyst/MMA molar ratio,catalyst/Al( i-Bu)3 molar ratio on the polymerization of MMA at 60℃ were also investigated.     

Anionic synthesis of in-chain 3° amine-functionalized polybutadienes

Anionic copolymerizations of butadiene (M₁) with excess 1-(4-dimethylaminophenyl)-1-phenylethylene (M₂) were conducted in benzene at room temperature for 24–48h using sec-butyllithium as initiator. Anisole, triethylamine and t-butyl methyl ether were added in ratios of [B]/[RLi] = 60, 20, 30, respectively, to promote copolymerization. Narrow molecular weight distribution copolymers with M̄n = 14 × 10³ to 32 × 10³ g/mol (M̄_w/M̄n =1.02–1.03) and 8,12 and 30 amine groups per chain for anisole, triethylamine and t-butyl methyl ether, respectively, were obtained. The butadiene monomer reactivity ratios (r1) were 42, 33 and 14 for anisole, triethylamine and t-butyl methyl ether, respectively.     

Highly heterotactic polymerization of methacrylates — Higher order stereoregulation and stereochemical significance

A combination of tert-butyllithium (t-BuLi) and bis(2,6-di-t-butylphenoxy)methylaluminium (MeAI(ODBP)₂) was found to be an efficient initiator for heterotactic living polymerization of certain alkyl methacrylates in toluene at low temperatures. The polymerization of methyl methacrylate (MMA) with t-BuLi/MeAI(ODBP)₂ (AI/Li=5 mol/mol) in toluene at −78°C gave heterotactic-rich poly(methyl methacrylate) (PMMA) with narrow molecular weight distributions (MWDs) (heterotactic triad fraction mr = 68%, ratio of weight- to number-average molecular weights M̄w/M̄n = 1.06-1.17). Other alkyl methacrylates also gave heterotactic polymers under the same conditions; in particular, ethyl and butyl methacrylates gave polymers with heterotactic triad fractions of 87%. The highest triad heterotacticity of 91.6% was obtained for the polymerization of ethyl methacrylate at −95°C. Some characteristic features of this stereospecific polymerization were discussed based on the polymerization results combined with other structural information of the polymer such as chain-end stereostructure and stereosequence distribution in the main chain.     

Reverse atom transfer radical polymerization of methyl acrylate using AIBN as the initiator under heterogeneous conditions

Reverse atom transfer radical polymerization of methyl acrylate in the presence of a conventional radical initiator (2,2′-azoisobutyronitrile, AIBN) in bulk was successfully implemented via a new polymerization procedure. The system first reacts at 65–70°C for ten hours, then polymerizes at 100°C. Various mole ratios of AIBN to Cu^IICl₂ were used in this work, all of which result in a well-controlled radical polymerization with high initiation efficiency and narrow molecular weight distribution, i.e., the polydispersity is as low as M̄_w/M̄_n = 1.36.     

Vinyl/Vinylene functionalized highly branched polyethylene waxes obtained using electronically controlled cyclohexyl‐fused pyridinylimine‐nickel precatalysts

A series of 8‐(2,6‐dibenzhydryl‐4‐R‐phenylimino)‐5,6,7‐trihydroquinoline ligands have been prepared in which the nature of 4‐R substitutions vary from electron withdrawing to electron donating. The treatment with NiCl₂.6H₂O or (DME)NiBr₂ afforded the corresponding complexes of nickel chloride (4‐R = Me Ni1 , Et Ni2 , ^tBu Ni3 , CHPh₂ Ni4 , Cl Ni5 , and F Ni6 ) and nickel bromide (4‐R = Me Ni7 , Et Ni8 , ^tBu Ni9 , CHPh₂ Ni10 , Cl Ni11 , and F Ni12 ). X‐ray diffraction study of complexes Ni3 , Ni6 , and Ni10 , revealed that Ni3.1/2H₂O and Ni6.H₂O adopted unsymmetrical and symmetrical chloride‐bridged dinuclear structures respectively, while Ni10.H₂O is found as mononuclear specie forming distorted‐square planer geometry. In the presence of either diethylaluminum chloride (Et₂AlCl) or modified methylaluminoxane (MMAO), all the nickel complexes ( Ni1–Ni12 ) displayed high activities (up to 1.91 × 10⁶ g(PE) mol (Ni)⁻¹h⁻¹. Highly branched polyethylene waxes with low molecular weights (M_w ≤ 2.6 kg/mol) and narrow molecular weights distributions (M_w/M_n ≤ 1.96) incorporated with vinylene and vinyl groups were obtained. The effects of 4‐R substitutions to the nickel chloride and bromide pre‐catalysts and reaction conditions on the catalytic performance and the properties of the resulting polyethylene were the subject of a detail investigation. The positive influences of using electron‐withdrawing 4‐R substitutions and bromides were observed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1269–1281     

Effect of the mixture t - BuCl/SnCl4 on the cationic polymerization of isobutylene

The polymerizations of isobutylene initiated with the system tert-butyl chloride (t-BuCl)/SnCl₄ and carried out in CH₂Cl₂ at −20°C and −78°C were investigated. The results obtained demonstrate that the presence of t-BuCl in the polymerizing system gives rise to a PIB product with a distinctly bimodal MWD. The higher-molecular weight (HMW) PIB, M̄_n = 20000, I=M̄_w/M̄_n ∼ 2.5, is the result of existence of the protogenic initiation with residual water in the reaction system. The lower-molecular weight (LMW) PIB, M̄_n < 600, M̄_w/M̄_n ≤ 1.4, is the product of polymerization initiated presumably with a complex t-BuCl-SnCl₄-H₂O. To elucidate the reaction mechanism of the polymerization initiated with the complex, a series of similar isobutylene polymerizations using the initiation system 2,5-dichloro-2,5-dimethylhexane (DDH)/SnCl₄ was run and the oily LMW PIB samples were investigated by ¹H-NMR. A new polymerization mechanism describing the role of DDH and t-BuCl is suggested.     

Four-coordinate trispyrazolylboratomanganese and -iron complexes with a pyrazolato co-ligand: syntheses and properties as oxidation catalysts

A series of complexes of the type [(Tp^R1,R2)M(X)] (Tp=trispyrazolylborato) with R¹/R² combinations Me/tBu, Ph/Me, iPr/iPr, Me/Me and for M=Mn or Fe coordinating [Pz^Me,tBu]^? (Pz=pyrazolato) or Cl^? as co‐ligand X has been synthesised. Although the chloride complexes were very unreactive and stable in air, the pyrazolato series was far more reactive in contact with oxidants like O₂ and tBuOOH. The [(Tp^R1,R2)M(Pz^Me,tBu)] complexes proved to be active pre‐catalysts for the oxidation of cyclohexene with tBuOOH, reaching turnover frequencies (TOFs) ranging between moderate and good in comparison to other manganese catalysts. Cyclohexene‐3‐one and cyclohexene‐3‐ol were always found to represent the main products, with cyclohexene oxide occasionally formed as a side product. The ratios of the different oxidation products varied with the reaction conditions: in the case of a peroxide/alkene ratio of 4:1, considerably more ketone than alcohol was obtained and cyclohexene oxide formation was almost negligible, whereas a ratio of 1:10 led to a significant increase of the alcohol proportion and to the formation of at least small amounts of the epoxide. Pre‐treatment of the dissolved [(Tp^R1,R2)M(Pz^Me,tBu)] pre‐catalysts with O₂ led to product distributions and TOFs that were very similar to those found in the absence of O₂, so that it may be argued that tBuOOH and O₂ both lead to the same active species. The results of EPR spectroscopy and ESI‐MS suggest that the initial product of the reaction of [(Tp^Me,Me)Mn(Pz^Me,tBu)] with O₂ contains a Mn^III(O)₂Mn^IV core. Prolonged exposure to O₂ leads to a different dinuclear complex containing three O‐bridges and resulting in different TOFs/product distributions. Analogous findings were made for other complexes and formation of these overoxidised products may explain the deviation of the catalytic performances if the reactions are carried out in an O₂ atmosphere.     

The Non-Ancillary Nature of Trimethylsilylamide Substituents in Boranes and Borinium Cations

The known boranes (R(Me₃Si)N)₂BF (R=Me₃Si 1 , tBu 2 , C₆F₅ 3 , o-tol 4 , Mes 5 , Dipp 6 ) and borinium salts (R(Me₃Si)N)₂B][B(C₆F₅)₄] (R=Me₃Si 7 , tBu 8 ) are prepared and fully characterized. Compound 7 is shown to react with phosphines to generate [R₃PSiMe₃]⁺ and [R₃PH]⁺ (R=Me, tBu). Efforts to generate related borinium cations via fluoride abstraction from (R(Me₃Si)N)₂BF (R=C₆F₅ 3 , o-tol 4 , Mes 5 ) gave complex mixtures suggesting multiple reaction pathways. However for R=Dipp 6 , the species [(μ-F)(SiMe₂N(Dipp))₂BMe][B(C₆F₅)₄] was isolated as the major product, indicating methyl abstraction from silicon and F/Me exchange on boron. These observations together with state-of-the-art DFT mechanistic studies reveal that the trimethylsilyl-substituents do not behave as ancillary subsitutents but rather act as sources of proton, SiMe₃ and methyl groups.     

Synthesis and characterization of multiarm star-branched polyisobutylenes: Effect of arm molecular weight

A series of star-branched polyisobutylenes with varying arm molecular weights was synthesized using the 2-chloro-2,4,4-trimethylpentane/TiCl₄/pyridine initiating system and divinylbenzene (DVB) as a core-forming comonomer (linking agent). The resulting star-branched polymers were characterized with regard to the weight-average number of arms per star molecule (N̄_w) and dilute solution viscosity behavior. As the molecular weight of the arm (M̄_{w, arm}) was increased, dramatically longer star-forming reaction times were needed to produce fully developed star polymers. It was calculated that N̄_w varied from 50 to 5 as the M̄_{w, arm} was increased from 13,000 to 54,000 g/mol. The radius of gyration, R_g, of the star polymers was observed to increase as M̄_{w, arm} was increased. The solution properties of the star polymers were evaluated in heptane using dilute solution viscometry. It was determined that the stars had a much higher [η] compared to the respective linear PIB arms, but a much lower [η] compared to a hypothetical linear analog of an equivalent molecular weight. The dependence of [η] on temperature for the stars and linear arms was very small over the temperature range 25 to 75°C, with only a very slight decrease with increasing temperature. [η]_star was also determined to increase with increasing M̄_{w, arm}, but decrease with increasing M̄_{w, star}. The branching coefficient, g′, calculated for the stars at 25°C, increased as N̄_w decreased and agre ed well with literature values for other star polymer systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3767–3778, 1997     

Rare‐Earth‐Metal Methyl,Amide, and Imide Complexes Supported by a Superbulky Scorpionate Ligand

The reaction of monomeric [(Tp^tBu,Me)LuMe₂] (Tp^tBu,Me=tris(3‐Me‐5‐tBu‐pyrazolyl)borate) with primary aliphatic amines H₂NR (R=tBu, Ad=adamantyl) led to lutetium methyl primary amide complexes [(Tp^tBu,Me)LuMe(NHR)], the solid‐state structures of which were determined by XRD analyses. The mixed methyl/tetramethylaluminate compounds [(Tp^tBu,Me)LnMe({μ₂‐Me}AlMe₃)] (Ln=Y, Ho) reacted selectively and in high yield with H₂NR, according to methane elimination, to afford heterobimetallic complexes: [(Tp^tBu,Me)Ln({μ₂‐Me}AlMe₂)(μ₂‐NR)] (Ln=Y, Ho). X‐ray structure analyses revealed that the monomeric alkylaluminum‐supported imide complexes were isostructural, featuring bridging methyl and imido ligands. Deeper insight into the fluxional behavior in solution was gained by ¹H and ¹³C NMR spectroscopic studies at variable temperatures and ¹H–⁸⁹Y HSQC NMR spectroscopy. Treatment of [(Tp^tBu,Me)LnMe(AlMe₄)] with H₂NtBu gave dimethyl compounds [(Tp^tBu,Me)LnMe₂] as minor side products for the mid‐sized metals yttrium and holmium and in high yield for the smaller lutetium. Preparative‐scale amounts of complexes [(Tp^tBu,Me)LnMe₂] (Ln=Y, Ho, Lu) were made accessible through aluminate cleavage of [(Tp^tBu,Me)LnMe(AlMe₄)] with N,N,N′,N′‐tetramethylethylenediamine (tmeda). The solid‐state structures of [(Tp^tBu,Me)HoMe(AlMe₄)] and [(Tp^tBu,Me)HoMe₂] were analyzed by XRD.     

Synthesis of branched polyethylenes by the tandem catalysis of silica‐supported linked cyclopentadienyl‐amido titanium catalysts and a homogeneous dibromo nickel catalyst having a pyridylimine ligand

The synthesis of branched polyethylenes by ethylene polymerization with new tandem catalyst systems consisting of methylaluminoxane‐preactivated linked cyclopentadienyl‐amido titanium catalysts [Ti(η⁵:η¹‐C₅Me₄SiMe₂NR)Cl₂ (R = Me or ^tBu)] supported on pyridylethylsilane‐modified silica (PySTiNMe and PySTiN^tBu) and homogeneous dibromo nickel catalyst having a pyridyl‐2,6‐diisopropylphenylimine ligand (PyminNiBr₂) in the presence of modified methylaluminoxane was investigated. Ethylene polymerization with only PyminNiBr₂ yielded a mixture of 1‐ and 2‐olefin oligomers with methyl branches [weight‐average molecular weight (M_w) ～ 460)] with a ratio of about 1:7. By the combination of this nickel catalyst with PySTiN^tBu, polyethylenes with long‐chain branches (M_w = 15,000–50,000) were produced. No incorporation of 2‐olefin oligomers was observed in the ¹³C NMR spectra. Unexpectedly, the combination of the nickel catalyst with PySTiNMe produced lower molecular weight polyethylenes with only methyl branches. The molecular weight distributions of branched polyethylenes obtained with both PySTiNMe and PySTiN^tBu combined with the nickel catalyst were broad (weight‐average molecular weight/number‐average molecular weight < 9). Bimodal gel permeation chromatography (GPC) curves were clearly observed in the PySTiNMe system, whereas GPC curves with small shoulders in low molecular weight areas were observed for PySTiN^tBu. The synthesis of branched polyethylenes with tandem catalyst systems of corresponding homogeneous titanium catalysts and the nickel catalyst was also investigated for comparison. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 528–544, 2003