Two new “H” type of indole‐based chromophores were designed and successfully introduced to the polymeric system, the resultant polymers demonstrated enhanced NLO effects, good processability, thermal stability and nearly excellent transparency, indicating the advantages of “H” type chromophore moieties. And they could be promising candidates for the practical applications as new photonic materials.
Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.
Suitably activated, (Cp*){N(tBu)C(Me)N(Et)}ZrMe2 is known to initiate the ‘living’ and isotactic‐selective polymerization of alk‐1‐enes, and it can be used to synthesize block copolymers and stereoblock polymers. We report a full molecular kinetic investigation of propene, but‐1‐ene, and hex‐1‐ene polymerization with a MAO‐activated catalyst system. By combining NMR microstructural polymer analysis with QM modeling of the active species, the complicated regio‐ and stereochemistry of the polyinsertion process, as well as the active chain‐transfer pathways, are investigated. The perspectives and limitations of this catalyst for application in (stereo)block polymerizations are discussed.
A novel approach has been explored to prepare brain‐like polyaniline (PANI) nanostructures with many convolutions (140–170 nm in average diameter) using aniline/citric acid (CA) salt as the template and chlorine gas as the oxidant by a gas/solid reaction for the first time. The method provided here differs significantly from the traditional one in which the polymerization of PANI is usually carried out in acidic solution.
Organic π‐conjugated polymers have emerged as one of the most fascinating classes of materials as they have found utility in a host of plastic electronics technologies. The distance between π‐systems and their relative orientation dictate energy/charge transfer, conductivity, and photophysical properties of these materials in bulk. This Feature Article discusses π‐conjugated polymers and model compounds in which specific inter‐π‐system interactions are covalently enforced and the effect that the scaffolding has on optoelectronic properties.
Conformational analysis of macromolecular structures reveals interesting higher‐order spatial arrangements. Analyzing these features as a function of time provides insights into the dynamical behavior of these systems and the identification of relevant subdomains. We present some visual‐analytic methods that we devised to explore the spatial‐temporal properties from molecular dynamics simulation data. These methods automatically detect common features and connect them to properties of interest. These methods yield physical insights that are not easily obtainable with existing methods for particle simulation data, as illustrated for polyacetylene interacting with a carbon nanotube.
Simulations of polymerization rate, molecular weight development and evolution of the concentrations of species participating in the reaction mechanism over a range of operating conditions, and a parameter sensitivity analysis showing the effects of temperature, activation/deactivation equilibrium constant and initial concentrations of controller and initiator (if present) on these variables are presented for the nitroxide‐mediated radical polymerization of styrene. The simulations were performed with a computer program based on a detailed reaction mechanism. The simulated profiles of conversion, number average molecular weight ( ), and polydispersity agree well with experimental data. Previously unknown activation energies for reactions involved in the mechanism are estimated. The temperature dependence of the kinetic rate constants obtained in this study will be useful for future modeling and optimization studies.
Stable aqueous dispersions of nanoparticles were prepared by polyelectrolyte complex formation between well‐defined poly(ethylene glycol)‐block‐poly(2‐acrylamido‐2‐methyl‐1‐propane sodium sulfonate) and poly(ethylene glycol)‐block‐poly[2‐(dimethylamino)ethyl methacrylate] diblock copolymers. Controlled synthesis of the copolymers was achieved by water‐based atom transfer radical polymerization (ATRP). The nanoparticles were characterized by a quite narrow and monomodal size distribution as evidenced by dynamic light scattering (DLS) and confirmed by atomic force microscopy (AFM) after solution casting and freeze‐drying.
Summary: The success of metathesis chemistry techniques has sparked a tremendous interest in polymer and material chemistry. This contribution provides an overview of the state of the art in ring opening metathesis polymerisation (ROMP). It is intended to provide the reader with useful information on the interplay of initiators, monomers, and reaction conditions, thus aiding polymer chemists to utilise the ROMP toolbox. Prominent and illustrative examples from current research are given in the article.
The preparation, characterization, materials properties, crystallization behavior and biodegradability of a polylactide (PLA)/organically modified layered silicate nanocomposite is described. Wide‐angle X‐ray diffraction and high‐resolution TEM analyses confirmed that intercalated stacked and disordered/exfoliated mica layers coexist in the nanocomposite. The nanocomposite showed improved materials properties and crystallization behavior with a simultaneous improvement in biodegradability as compared to neat PLA.
Degree of biodegradation (i.e. CO2 evolution) of neat PLA and PLACN4 under compost conditions. 相似文献
A simple approach to improve the structural ordering in block copolymer/nanoparticle nanocomposites is presented. It is to blend a small molecular weight homopolymer with the composites, which can uniformly swell the preferred domain where the nanoparticles locate and increase the conformational entropy of the domain. Consequently, the interfaces between the block copolymer domains become smooth that improves the long range order in the nanocomposites. Furthermore, the uniform swelling of the preferred domain by the homopolymer will allow higher loading of nanoparticles without adversely affecting the long range order.
Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.
Dependence of ln([M]0/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C. 相似文献
Summary: The first example of a room temperature reversible addition‐fragmentation chain transfer polymerization conducted directly in aqueous media is detailed. Under these conditions acrylamide and N,N‐dimethylacrylamide may be polymerized in a controlled fashion to near quantitative conversions employing a difunctional trithiocarbonate chain transfer agent (CTA). Hydrolysis studies conducted at pH 5.5 suggest that the CTA is stable up to approximately 50 °C.
The direct enzymatic synthesis of a cyclic trimethylene carbonate (1,3‐dioxane‐2‐one) monomer with/without a methyl substituent was carried out using dimethyl or diethyl carbonate and 1,3‐diol with the objective of producing aliphatic poly(trimethylene carbonate), a typical biodegradable synthetic plastic. The lipase‐catalyzed condensation of dimethyl or diethyl carbonate with aliphatic 1,3‐diols using immobilized Candida antarctica lipase (lipase CA) in an organic solvent at 70 °C afforded the corresponding methyl‐substituted and unsubstituted cyclic trimethylene carbonates. The cyclic trimethylene carbonates obtained by the reaction of dimethyl or diethyl carbonates with 1,3‐propanediol and 2‐methyl‐1,3‐propanediol were polymerized by lipase to produce the corresponding polycarbonates.
Total TMC yield as a function of the reaction time. 相似文献
Photolabile polymer brushes with tailored length containing a photoremovable protecting group (NVOC) are prepared via the SI‐ATRP method. Upon light irradiation, the NVOC group is removed to generate controlled densities of free amine groups (PAMA) randomly distributed along the brush. The presence of the ionizable groups induces a photo‐triggered swelling response. The swelling degree can be tuned by the irradiation dose. A dual (light and pH), tunable response is demonstrated.
Functional polymers possess tremendous potential both in academia and in industry. In particular, oxiranes offer manifold possibilities for the introduction of single hydroxyl or multiple orthogonal functionalities in carbanionic polymerization. Here, we present a brief overview of the fascinating possibilities arising from the employment of common as well as individually designed epoxide derivatives for the synthesis of end‐functional polymers. Continuous flow techniques can be utilized for the rapid generation and screening of precisely defined hydroxyl‐modified polymers. The utilization of functionalized polymers as precursors for the formation of complex macromolecular architectures (e.g., miktoarm star polymers) is summarized and potential applications as well as future perspectives are discussed.
