Complex aggregates of silica microspheres by the use of a polymer template

Evaporation of a droplet of silica microsphere suspension on a polystyrene and poly(methyl methacrylate) blend film with isolated holes in its surface has been exploited as a means of particles self-assembly. During the retraction of the contact line of the droplet, spontaneous dewetting combined with the strong capillary force pack the silica microspheres into the holes in the polymer surface. Complex aggregates of colloids are formed after being exposed to acetone vapor. The morphology evolution of the underlying polymer film by exposure to acetone solvent vapor is responsible for the complex aggregates of colloids formation.     

Birefringence control by hydrogen bonding on compatible polymer pair composed of hydrogenated ring‐opening polymer and modified polystyrene

A new polymer blend composed of a hydrogenated ring‐opening polymer (HROP) with an ester group and hydroxyl functionalized polystyrene (HFP) produced the excellent transparent materials which enabled a precise birefringence control in keeping with the other physical properties for optical film use. The blend with a composition from 0.28 to 0.35 for the HFP weight fraction showed an extraordinary wavelength dispersion, transmitting through a zero birefringence point at the critical fraction of 0.45, while each polymer showed an ordinary wavelength dispersion. The observed excellent transparency even above those of the glass transition temperature was attributed to a depressed phase separation that resulted from strong hydrogen bond between the ester and hydroxyl groups. An IR analysis of the film demonstrated a remarkable red‐shift in the carbonyl peak with an increase of the hydroxylated polystyrene content, indicating a strong hydrogen bond between those groups. This new polymer blend provides a useful design to achieve practical demands for film use, both optical and mechanical under the fabrication conditions using the melt extrusion technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3132–3143     

Solvent effect on the miscibility of polymer blends

Starting from the Flory-Huggins theory applied to a polymer/polymer/solvent solution, an expression has been derived showing the overall effect of solvent on the composition of the polymer blend in the final solid state. This expression has been experimentally verified by investigating the miscibility of two polymer blends: polystyrene/poly(α-methylstyrene) cast from tetrahydrofuran and cyclohexane, and polystyrene/poly (methyl methacrylate) obtained from tetrahydrofuran and chloroform. Besides the usual differential scanning calorimetry technique, thermogravimetric analysis might be helpful for detecting the miscibility of polymer blends.     

Strong effect of methyl group on the strength of ionic hydrogen bond between C2H2 and H3O+

The effect of methyl group on the strength of the ionic hydrogen bond between C₂H₂ and H₃O⁺ has been studied with quantum chemical calculations at the UMP2/6‐311++G(d,p) level. The presence of a methyl group in the proton acceptor results in an energetic increase of 6.02 kcal/mol, increased by about 39%, whereas that in the proton donor leads to an energetic decrease of 2.18 kcal/mol, decreased by 14%. The charge analyses indicate that the methyl group in the proton acceptor is electron‐donating and that in the proton donor is electron‐withdrawing. The former plays a positive contribution to the formation of ionic hydrogen bond and the latter plays a negative contribution to the formation of ionic hydrogen bond. The weakening effect of solvent on the role of methyl group in the ionic hydrogen bond has also been studied at the UB3LYP/6‐311++G(d,p) level. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Influence of substitution, hybridization, and solvent on the properties of C-HO single-electron hydrogen bond in CH3-H2O complex

The effect of substitution, hybridization, and solvent on the properties of the C...HO single-electron hydrogen bond has been investigated with quantum chemical calculations. Methyl radical, ethyl radical, and vinyl radical are used as the proton acceptors and are paired with water, methanol, HOCl, and vinyl alcohol. Halogenation (Cl) of the proton donor strengthens this type of hydrogen bond. The methyl group in the proton donor and proton acceptor plays a different role in the formation of the C...HO single-electron hydrogen bond. The former is electron-withdrawing, and the latter is electron-donating, both making a constructive contribution to the enhancement of the interaction. The contribution of the methyl group in the proton acceptor is larger than that in the proton donor. The increase of acidity of the proton is helpful to form a single-electron hydrogen bond. As the proton acceptor varies from the methyl radical to the vinyl radical, the interaction strength also increases. The solvent has an enhancing influence on the strength of the C...HO single-electron hydrogen bond. These factors affect the C...HO single-electron hydrogen bond in a similar way that they do other types of hydrogen bonds.     

Synthesis and Self‐Assembly of Dihydroxyperylene Bisimides for the Tuning of Photophysical Properties

The synthesis of 1,10‐dihydroxyperylene bisimides by nucleophilic substitution of brominated perylene bisimide is described. 1,10‐Dihydroxyperylene bisimides formed J aggregates in nonpolar solvents and showed a clearly redshifted absorption band. The solvent polarity also influenced the hydrogen bond with the hydroxyl group, and thus, the photophysical properties of perylene bisimide. The photophysical properties of these dihydroxyperylene perylene bisimides can also be tuned by changing charge transfer from the hydroxyl groups to the perylene core through the introduction of metal ions.     

Polymer-Polymer interactions via analog calorimetry. 1—blends of polystyrene with poly(2,6-dimethyl-1,4-phenylene oxide)

Analog calorimetry is used as a tool to study the interaction of polystyrene, PS, with poly(2,6-dimethyl-1,4-phenylene oxide), PPO, and with poly(1,4-phenylene oxide). Electrostatic charge calculations were used as a guide to divide polymer repeat units and analogs into groups. A mean-field binary interaction model was used to cvaluate group interaction energies. The enthalpic interaction energy for the blend of PS-PPO obtained from this study is −1.35 ± 0.19 cal/cm₃, which is in good agreement with values obtained from neutron scattering. The results indicate that electronic rearrangements between the phenyl ring and substituted methyl groups in PPO have a large influence on the interaction with polystyrene. © 1996 John Wiley & Sons, Inc.     

Improved phase separation in polymer solar cells by solvent blending

The effect of solvent blending on the performance of an anthracene‐containing poly(p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) backbone‐based donor polymer with asymmetrically substituted branched 2‐ethylhexyloxy and methyloxy side‐chains in bulk heterojunction solar cells is reported. This copolymer yields relatively high open‐circuit voltages with fullerene‐based electron acceptors. We systematically studied the thin‐film blend morphology and solar cell performance as a function of solvent composition (chlorobenzene to chloroform ratio) and polymer to [6,6]‐phenyl C61‐butyric acid methylester (PCBM) ratio. We combined photophysical investigations with atomic force microscopy and grazing incidence wide‐angle X‐ray scattering to elucidate the solid‐state morphology in thin films. In the investigated polymer system, the blend morphology becomes independent of the supporting solvent for high PCBM concentrations. Deposition from solvent blends rather than from pure chlorobenzene facilitates the beneficial phase separation between polymer and PCBM, leading to improved charge transport properties (short‐circuit currents) at lower PCBM concentrations. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013, 51, 868–874     

血液灌流用内毒素吸附材料研究

内毒素血症是败血症致死率极高的主要原因之一,迅速并有效地清除患者体内的内毒素,是临床医学面临的一个难题．用血液灌流的方法,选用有效的吸附剂,通过体外循环从血液中直接清除内毒素,受到了人们越来越多的关注．国内外研究者已开始研究利用该方法治疗内毒素血症,用活性炭     

Regulating function of methyl group on the strength of dihydrogen bond in HBeH-HCCH and HMgH-HCCH complexes

The regulating function of methyl group on the strength of dihydrogen bond was investigated in HBeH-HCCH and HMgH-HCCH complexes at the MP2/6-311++G(3df,2p) level. The bond lengths, infrared spectra, interaction energies, and charge transfers were analyzed. The presence of methyl group in the proton acceptor enhances the strength of dihydrogen bond, whereas its presence in the proton donor weakens the strength of dihydrogen bond. The charge analyses indicate that the methyl group in the proton donor and acceptor is electron-donating, thus the methyl group in the proton donor plays a negative role, whereas in the proton acceptor it plays a positive role in the formation of dihydrogen bond.     

High breakdown strength and low loss binary polymer blends of poly(vinylidene fluoride‐trifluoroethylene‐chlorofluoroethylene) and poly(methyl methacrylate)

Dielectric materials with high breakdown strength and low loss are of crucial importance in capacitive energy storage electronics. Herein, a kind of polymer blend composed of poly(vinylidene fluoride‐trifluoroethylene‐chlorofluoroethylene) ferroelectric terpolymer and linear dielectric poly(methyl methacrylate) (PMMA) is presented. The polymer blend shows a breakdown strength of 733 MV/m and a charge‐discharge efficiency over 90% at 200 MV/m with optimized PMMA content, which are 101% and 28% higher than that of neat terpolymer. Moreover, microsecond discharge time of 2.26 μs, along with a power density that is 3.6 times that of the current commercially available biaxially oriented polypropylene, as well as great cyclic performance, has been achieved under an electric field of 200 MV/m. The findings of this research demonstrate that the incorporation of linear dielectric PMMA into poly(vinylidene fluoride)‐based ferroelectric polymer provides a new strategy in designing high breakdown strength low loss dielectric materials for reliable compact flexible film capacitors.     

The effect of hydrogen bonding on the physical and mechanical properties of rigid‐rod polymers

The idea of competing effects between intramolecular and intermolecular hydrogen bonding was investigated. Results indicate that the formation of one type of hydrogen bond does not preclude the formation of the other. The strength of the intermolecular association was measured by ab initio calculations for several polymer systems, including methyl pendant poly(p‐phenylene benzobisimidazole) and poly‐{2,6‐diimidazo[4,5‐b:4′5′‐e]pyridinylene‐1,4(2,5‐dihydroxy)phenylene} (PIPD). Fibers with strong intermolecular association have high compressive strength and torsional modulus. The influence of intermolecular hydrogen bonding on torsional modulus is discussed in light of the transverse texture present in poly(p‐phenylene terephthalamide) and some other high‐performance fibers. Enhanced intermolecular interaction not only influences the aforementioned properties but also results in higher fiber density. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3053–3061, 2000     

X‐ray photoelectron spectroscopy of miscible poly(methyl methacrylate)/poly(styrene‐co‐acrylonitrile) and immiscible poly(methyl methacrylate)/polyacrylonitrile polymer surfaces metallized by nickel

A miscible blend of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) and an immiscible blend of poly(methyl methacrylate) and polyacrylonitrile were metallized by nickel, and their surfaces were analyzed by X‐ray photoelectron spectroscopy. Before metallization, the heteroatom distribution at the polymer surface was very different in the miscible and immiscible blends. However, this distribution was modified during metallization, which was only possible via polymer‐bond breaking, leading to similar compositions at the two interfaces. Oxygen exhibited a better affinity with nickel than nitrogen, but nickel oxide and nickel nitride were both formed at the interface. Nickel nitride prevented the metal from diffusing into the substrate, playing the role of a barrier, thus driving the oxygen to the metal layer. Amorphous carbon was also detected at the interface as a new carbon species, but it did not have any significant influence on the changes induced in the distribution of heteroatoms at the polymer surfaces. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1408–1416, 2004     

Molecular interaction in some polymeric additive solutions containing styrene-hydrogenated butadiene copolymer

The miscibility of styrene-hydrogenated butadiene copolymer (SHB) with different constituents of polymer additives for lubricating mineral oils was studied in dilute solution regime, using xylene as model solvent, at 30 °C, in a wide range of polymer blend compositions. The systems studied were SHB/poly(ethylene-co-propylene) (EPC), SHB/poly(methyl methacrylate) (PMMA), SHB/poly(dodecyl methacrylate) (PDDMA) and SHB/polystyrene (PS). The viscometric interaction parameters were calculated according to the Krigbaum–Wall and Catsiff–Hewett models of ideal viscometric behavior. Strong repulsive interactions were found in SHB/PMMA and SHB/PDDMA systems pointing to immiscibility. SHB/EPC and SHB/PS deviated much less from ideality. The results were compared to the theoretical estimation of interaction in polymer blends in the absence of solvent, using the Coleman–Graf–Painter approach. No correlation was observed between the interaction in the bulk and in solution.     

VISCOMETRIC STUDY OF POLY(METHYL METHACRYLATE) AND POLYSTYRENE BLENDS IN DIFFERENT SOLVENTS

The intermolecular interaction between poly(methyl methacrylate) (PMMA) and polystyrene (PS) intetrahydrofuran (THF) and N,N'-dimethyl formamide (DMF) solvents was studied at 28℃ using a dilute solution viscometrymethod. Solvent is believed to play a key role in characterizing the viscosity behavior of the polymer solution. The intrinsicviscosity and viscosity interaction parameter were experimentally measured for the binary (solvent/polymer) and for theternary systems in two solvents. The compatibility of the polymer mixture was discussed in terms of the sign of △b_m. Theresults show that the compatibility of PMMA/PS blend in DMF is larger than that in THF.     

Effect of the repeated unit length of guest polymers on the molecular motion of polymer blends within a miscible window

The effect of the repeated unit length on the substantially increasing molecular motion and entropy change (?TΔS_m) of polymer blends was investigated with solid‐state ¹³C NMR and differential scanning calorimetry within a miscible window. The hydrogen‐bonding strength, from the formation of the phenolic–polyester interaction, was not high enough to overcome the breaking‐off of the self‐association of the phenolic. With respect to the increasing repeated unit length, the polyester resonance intensity of the solid‐state ¹³C NMR spectra was weakened because of the reduction in the cross‐polarization efficiency in highly mobile samples. The glass‐transition temperature of the blend and the proton spin–lattice relaxation time from NMR experiments were also reduced. The effect of the reduced hydrogen‐bonding strength on blending brought about a tendency of higher entropy (?TΔS_m) and higher molecular mobility of the blend. Accordingly, poly(decamethylene adipate) possessed the longest repeated unit length and exhibited the most mobile one in this phenolic/polyester blend family. The molecular segmental motion and entropy progressively increased while the repeated unit length of the guest polymers increased within a miscible window. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 679–686, 2003     

Surface aggregation structure and surface mechanical properties of binary polymer blend thin films

During preparation of very thin polymer belnd films from a solution of polymers, the phase‐separated structures which are quite different from that observed for the bulk blend film was observed. From atomic force microscopic(AFM) observation, it is concluded that the surface undulation, which reflects the phase separated morphology of the blend system, is present. In the case of (polystyrene(PS)/poly(methyl methacrylate)(PMMA)) blend system, a large influence of end‐group chemistry on the surface morphology was observed. The phase identification of the (rubbery polymer/glassy polymer) binary blend thin films was successfully achieved by scanning vioscoelasticity microsopy(SVM).     

Strength of hydrogen bonding in the novolak-type phenolic resin blends

The specific interaction strength of novolak-type phenolic resin blended with three similar polymers [i.e., poly(ethylene oxide) (PEO), poly(ethylene glycol) (PEG), and poly(vinyl alcohol) (PVA)] were characterized by means of glass transition temperature behavior and Fourier transform infrared (FTIR) spectroscopy. The interassociation formed within phenolic blends with the addition of a modifier not only overcomes the effect of self-association of the phenolic upon blending, but also increases the strength of phenolic blend. The strength of interassociation within the phenolic blend is the function of the hydrogen bonding group of a modifier, in increasing order, is phenolic/PVA, phenolic/PEG, and phenolic/PEO blend, corresponding to the result of “q” value in the Kwei equation. The FTIR result is in agreement with the inference of T_g behavior. In addition, the fact that the specific strength of hydrogen bonding of hydroxyl–hydroxyl is stronger than that of hydroxyl–ether can also be concluded. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1721–1729, 1998     

Shear influences on polymer blends: experimental,theoretical approaches and technical implications

We examine the effects of shear on polymer blends consisting of partially miscible components, i.e. systems close to the phase boundary. The eminent phenomenon is the shift of the phase boundary, either extending the homogeneous area (flow‐induced mixing) or the opposite effect (flow‐induced demixing). The kinetics of the demixing process and concentration fluctuations are also influenced by flow fields, inducing anisotropy due to the flow direction. Experiments (scattering, rheology, in‐situ flow‐scattering, microscopy, DSC) are carried out with the academic model blend polystyrene/poly(vinyl methyl ether) and the industrial poly(styrene‐co‐maleic anhydride)/poly (methyl methacrylate) blend. The experimental results are rationalised in terms of a generalised Gibbs energy of mixing by including the energy which is stored in the sheared fluids.     

Hydrogen‐bonding interaction and miscibility between poly(ε‐caprolactone) and enzymatically polymerized novel polyphenols

The intermolecular hydrogen‐bonding interaction and miscibility between enzymatically prepared novel polyphenols [poly(bisphenol A) and poly(p‐tert‐butyl phenol)] and poly(ε‐caprolactone) (PCL) were investigated as a function of composition by Fourier transform infrared spectroscopy (FTIR) and DSC. The blend films of PCL and polyphenols were prepared by casting polymer solution. The FTIR spectra clearly indicated that PCL and polyphenols interact through strong intermolecular hydrogen bonds formed between the PCL carbonyls and the polyphenol hydroxyl groups. The melting point and degree of crystallinity of the PCL component decreased with an increased polyphenol content. A single glass‐transition temperature was observed for the blend, and its value increased with the content of polyphenol, indicating that PCL and polyphenols are miscible in the amorphous state. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2898–2905, 2001