Conductive,Monodisperse Polyaniline Nanofibers of Controlled Length Using Well‐Defined Cylindrical Block Copolymer Micelles as Templates

Stable colloidal dispersions of polyaniline (PAni) nanofibers with controlled lengths from about 200 nm–1.1 μm and narrow length distributions (L_w/L_n<1.04; L_w=weight average micelle length, L_n=number average micelle length) were prepared through the template‐directed synthesis of PAni using monodisperse, solution‐self‐assembled, cylindrical, block copolymer micelles as nanoscale templates. These micelles were prepared through a crystallization‐driven living self‐assembly method from a poly(ferrocenyldimethylsilane)‐b‐poly(2‐vinylpyridine) block copolymer (PFS₂₅‐b‐P2VP₄₂₅). This material was initially self‐assembled in iPrOH to form cylindrical micelles with a crystalline PFS core and a P2VP corona and lengths of up to several micrometers. Sonication of this sample then yielded short cylinders with average lengths of 90 nm and a broad length distribution (L_w/L_n=1.32). Cylindrical micelles of PFS₂₅‐b‐P2VP₄₂₅ with controlled lengths and narrow length distributions (L_w/L_n<1.04) were subsequently prepared using thermal treatment at specific temperatures between 83.5 and 92.0 °C using a 1D self‐seeding process. These samples were then employed in the template‐directed synthesis of PAni nanofibers through a two‐step procedure, where the micellar template was initially stabilised by deposition of an oligoaniline coating followed by addition of a polymeric acid dopant, resulting in PAni nanofibers in the emeraldine salt (ES) state. The ES–PAni nanofibers were shown to be conductive by scanning conductance microscopy, whereas the precursor PFS₂₅‐b‐P2VP₄₂₅ micelle templates were found to be dielectric in character.     

Novel aspects of nanocellulose

Novel nanoscaled cellulose particles were prepared using high-pressure homogenization of aqueous media contenting treated cellulose samples in a Microfluidizer^® processor (MF). Here, we present the generation of spherical cellulose nanoparticles as an extension of previously published reports of nano fibrillated cellulose. Although MF treatment of unmodified cellulose yields nanofibrils which are reported in several publications, in the current work different kinds of pretreatments were proven to be necessary to obtain spherical structured cellulose nanoparticles. One such treatment may be the decrystallization of cellulose regenerating it from N-methylmorpholine-N-oxid-monohydrate (NMMNO*H₂O). Nanocellulose was then obtained by a subsequent high-pressure mechanical treatment of the precipitate in aqueous dispersion. Decrystallization was also realized by grinding cellulose in a planetary ball mill. The resulting amorphous intermediates were characterized by Raman spectroscopy. Another approach tested was hydrolysis and subsequent mechanical treatment using an Ultra-Turrax^® and MF. Another alternative was given by the mechanical treatment of aqueous dispersions of low substituted cellulose derivatives such as carboxymethyl cellulose and oxidized cellulose without any further hydrolysis.     

All-cellulose composites from unbleached hardwood kraft pulp reinforced with nanofibrillated cellulose

In the present work, nanofibrillated cellulose (NFC) from bleached eucalyptus pulp was prepared, characterized and used as reinforcement in an unbleached eucalyptus fiber matrix. First, the NFC was fabricated through TEMPO-mediated oxidation and characterized for the degree of polymerization, water retention value, cationic demand and carboxyl content. Intrinsic mechanical properties were also calculated by applying the rule of mixtures, which determines the coupling (f _c) and efficiency factor (η _e) of cellulose nanofibrils within the matrix. The results showed that the average intrinsic tensile strength and Young’s modulus of NFC are estimated to be 6,919 MPa and 161 GPa, respectively. After characterization, the NFC was used as reinforcement in the preparation of biocomposites in the form of paper handsheets, which were physically and mechanically analyzed. The presence of NFC induced an increase in the density of biocomposites and significant enhancement of the mechanical properties as well as an important reduction in porosity. Finally, f _c and η _e were determined from the mean intrinsic properties.     

Degradation of cellulosic insulation in power transformers: a SEC–MALLS study of artificially aged transformer papers

The molecular weight distributions of artificially aged transformer papers were studied using SEC–MALLS with 0.5 % DMAc/LiCl as solvent, providing chain length distributions and averages. The slow dissolution and presence of non-cellulosic contaminants tend in some cases to introduce errors in the DP_w estimates, and a modified data processing procedure was developed to correct for extraneous scattering. Data were compared to the intrinsic viscosities obtained in 0.5 M Cuen and the ‘viscosimetric DP’ calculated thereof according to ISO 5351. DP_visc was 2–3 times lower than the weight average DP (DP_w), but closer to or slightly above the number average DP (DP_n) obtained by SEC–MALLS in the case of pure cellulose. Ageing of transformer papers were in some cases associated with changes in the polydispersity (DP_w/DP_n). The apparent degradation rate (defined as δ(1/DP)/δt) gradually decreased with time, resulting in a tendency for a ‘level-off’ DP in the range 200–300 for DP_visc and DP_n, and roughly 1,000 for DP_w.     

Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds

Cellulose nanofibrils were prepared by mechanical fibrillation of never-dried beech pulp and bacterial cellulose. To facilitate the separation of individual fibrils, one part of the wood pulp was surface-carboxylated by a catalytic oxidation using (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) as a catalyst. After fibrillation by a high pressure homogenizer, the obtained aqueous fibril dispersions were directly mixed with different urea–formaldehyde-(UF)-adhesives. To investigate the effect of added cellulose filler on the fracture mechanical properties of wood adhesive bonds, double cantilever beam specimens were prepared from spruce wood. While the highest fracture energy values were observed for UF-bonds filled with untreated nanofibrils prepared from wood pulp, bonds filled with TEMPO-oxidized fibrils showed less satisfying performance. It is proposed that UF-adhesive bonds can be significantly toughened by the addition of only small amounts of cellulose nanofibrils. Thereby, the optimum filler content is largely depending on the adhesive and type of cellulose filler used.     

Oxidation of wood cellulose using 2-azaadamantane N-oxyl (AZADO) or 1-methyl-AZADO catalyst in NaBr/NaClO system

A wood cellulose was oxidized with catalytic amounts of 2-azaadamantane N-oxyl (AZADO) or 1-methyl-AZADO, in an NaBr/NaClO system, in water at pH 10. The oxidation efficiency, carboxylate/aldehyde contents, and degree of polymerization (DP_v) of the oxidized celluloses thus obtained were evaluated in terms of the amount of AZADO or 1-methyl-AZADO catalyst added, in comparison with those prepared using the TEMPO/NaBr/NaClO system. When the AZADO/NaBr/NaClO and 1-methyl-AZADO/NaBr/NaClO oxidation systems were applied to wood cellulose using the same molar amount of TEMPO, the oxidation time needed for the preparation of oxidized celluloses with carboxylate contents of 1.2–1.3 mmol/g was reduced from ≈80 to 10–15 min. Moreover, the molar amounts of AZADO and 1-methyl-AZADO that had to be added for the preparation of oxidized celluloses with carboxylate contents of 1.2–1.3 mmol/g were reduced to 1/32 and 1/16 of the amount of TEMPO added, respectively. The DP_v values for the AZADO- and 1-methyl-AZADO-oxidized celluloses after NaBH₄ treatment were in the range of 600–800. This indicated that not only C6-carboxylate groups but also C2/C3 ketones were formed to some extent on the crystalline cellulose microfibril surfaces during the AZADO- and 1-methyl-AZADO-mediated oxidation. When the AZADO-oxidized wood cellulose, which had a carboxylate content of 1.2 mmol/g, was mechanically disintegrated in water, an almost transparent dispersion consisting of individually nano-dispersed oxidized cellulose nanofibrils was obtained, with a nanofibrillation yield of 89 %.     

Blend membranes from cellulose/konjac glucomannan cuprammonium solution

The blend membranes were prepared from cellulose/konjac glucomannan (KGM) cuprammonium solution by coagulating with aqueous 10 wt% NaOH solution, 20°C and 40°C water, respectively. Miscibility, pore morphology, structure, water permeability and mechanical properties of the blend membranes were investigated. The complex forms of cellulose/KGM in the mixed solutions, the effect of various coagulants and the percent content of KGM (w_KGM) on the structure and properties of the blend membrane are discussed. SEM and mechanical relaxation analysis indicate that the blend membranes are miscible in the range of 0–30 wt% of w_KGM. When w_KGM was smaller than 20 wt%, the tensil strength of the blend membrane coagulated by alkali aqueous solution was enhanced, corresponding to homogeneous structure and small pore size. However, blend membranes having a larger pore size (366 nm by SEM) and water permeability (560 ml/m² h mmHg) were obtained by coagulating the cellulose/KGM (70:30) cuprammonium solution with 40°C water, where ca. 20% of KGM as pore former were removed from the membrane.     

Hydrothermal saccharification of cotton cellulose in dilute aqueous formic acid solution

Cotton cellulose subjected to a dilute aqueous formic acid solution, at acid concentrations up to 1% (w/w), under hydrothermal conditions in a semi-batch reactor was converted into glucose and oligomers with lower degrees of polymerizations (DP). After heating at 250 °C for 60 min in 0.1% (w/w) aqueous formic acid solution, yields of glucose and total sugar with DP = 1 to 9 were 36.6 and 83.8% (100 × gC/gC of initial cotton sample), respectively, and 5-hydroxymethylfurfural was almost as low as 1%. The yields of glucose and oligomers were significantly improved by adding the acid. The reaction was represented by first-order reaction kinetics with regard to (1 ?C x) where x is the conversion based on the total sugar or glucose yield. At 250 °C, the differences in the rate constants (k ? k _water) were proportional to the square root of formic acid concentration.     

Behavior of cellulose in NaOH/Urea aqueous solution characterized by light scattering and viscometry

Cellulose was dissolved in 6 wt % NaOH/4 wt % urea aqueous solution, which was proven by a ¹³C NMR spectrum to be a direct solvent of cellulose rather than a derivative aqueous solution system. Dilute solution behavior of cellulose in a NaOH/urea aqueous solution system was examined by laser light scattering and viscometry. The Mark–Houwink equation for cellulose in 6 wt % NaOH/4 wt % urea aqueous solution at 25 °C was [η] = 2.45 × 10^?2 weight‐average molecular weight (M_w)^0.815 (mL g^?1) in the M_w region from 3.2 × 10⁴ to 12.9 × 10⁴. The persistence length (q), molar mass per unit contour length (M_L), and characteristic ratio (C_∞) of cellulose in the dilute solution were 6.0 nm, 350 nm^?1, and 20.9, respectively, which agreed with the Yamakawa–Fujii theory of the wormlike chain. The results indicated that the cellulose molecules exist as semiflexible chains in the aqueous solution and were more extended than in cadoxen. This work provided a novel, simple, and nonpollution solvent system that can be used to investigate the dilute solution properties and molecular weight of cellulose. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 347–353, 2004     

Highly charged nanocrystalline cellulose and dicarboxylated cellulose from periodate and chlorite oxidized cellulose fibers

Softwood cellulose pulp was oxidized by a two-step oxidation process with sodium periodate followed by sodium chlorite at pH 5.0. The oxidized product was first separated into two fractions by centrifugation, and the supernatant was further separated in two fractions by addition of ethanol and centrifugation. Different levels of oxidation were performed on cellulose, and the mass ratio and carboxyl content of each fraction were determined. The first precipitate, which amount decreases with increasing oxidation level, consists of short fiber fragments (microfibrils) with length of 0.6–1.8 μm and width around 120 nm, which for sufficiently high oxidation levels, could readily be made into cellulose nanofibrils by stirring. The second precipitate (after alcohol addition) has a very high crystalline index of 91 % and contains rod-like particles with length of 120–200 nm and diameter around 13 nm, reminiscent of nanocrystalline cellulose. The supernatant contains water-soluble dicarboxylated cellulose, as proven by liquid C-13 NMR.     

Compositional Changes in Sugarcane Bagasse on Low Temperature, Long-term Diluted Ammonia Treatment

Sugarcane bagasse is the major by-product of the sugar industry. It has a great potential for the production of biofuels and chemicals due to its considerable amount of cellulose and hemicellulose. In this study, we investigated a simple and economic pretreatment process using dilute ammonia for the storage of sugarcane bagasse. Sugarcane bagasse was stored in 0, 0.03, and 0.3% (w/w) ammonium hydroxide in a closed bottle for 40 days at 30 °C under atmospheric pressure without any agitation or circulation. Samples were taken every 10 days and analyzed for changes on lignin, cellulose, hemicellulose composition, ammonia concentration, and microbial counts. Biomass storage for 40 days at 0.3% ammonium hydroxide removed 46% of lignin and retained 100% cellulose and 73% hemicellulose.     

Sulfonated cellulose nanofibrils obtained from wood pulp through regioselective oxidative bisulfite pre-treatment

The consecutive pre-treatment of cellulose with periodate and bisulfite was used as a new potential method to promote nanofibrillation of hardwood pulp and to obtain nanofibrils with sulfonated functionality. Nanofibrils having typical widths of 10–60 nm were obtained from sulfonated celluloses having low anionic charge densities (0.18–0.51 mmol/g) by direct high-pressure homogenization without the use of any mechanical pre-treatments. The aqueous nanofibrils existed as highly viscous and transparent gels and possessed cellulose I crystalline structures with crystallinity indexes of approximately 40 %. A transparent film was obtained from sulfonated nanofibrils having tensile strength of 164 ± 4 MPa and Young’s modulus of 13.5 ± 0.4 MPa. Oxidative sulfonation was shown to be a potential green method to promote nanofibrillation of cellulose, as it avoids the production of halogenated wastes, because the periodate used can be efficiently regenerated and recycled as shown in the preliminary experiments.     

Tuning percolation speed in layer-by-layer assembled polyaniline–nanocellulose composite films

Polyaniline of low molecular weight (ca. 10 kDa) is combined with cellulose nanofibrils (sisal, 4–5 nm average cross-sectional edge length, with surface sulphate ester groups) in an electrostatic layer-by-layer deposition process to form thin nano-composite films on tin-doped indium oxide (ITO) substrates. AFM analysis suggests a growth in thickness of ca. 4 nm per layer. Stable and strongly adhering films are formed with thickness-dependent coloration. Electrochemical measurements in aqueous H₂SO₄ confirm the presence of two prominent redox waves consistent with polaron and bipolaron formation processes in the polyaniline–nanocellulose composite. Measurements with a polyaniline–nanocellulose film applied across an ITO junction (a 700 nm gap produced by ion beam milling) suggest a jump in electrical conductivity at ca. 0.2 V vs. SCE and a propagation rate (or percolation speed) two orders of magnitude slower compared to that observed in pure polyaniline This effect allows tuning of the propagation rate based on the nanostructure architecture. Film thickness-dependent electrocatalysis is observed for the oxidation of hydroquinone.

     

Viscoelasticity and rheology in the regimes from dilute to concentrated in cellulose 1-ethyl-3-methylimidazolium acetate solutions

Dynamic rheological behaviors of α-cellulose 1-ethyl-3-methylimidazolium acetate ([Emim]Ac) solutions were investigated in a large range of concentrations (0.1–10 wt %) at 25 °C. On the basis of data from the dynamic viscoelastic test, the exponents of the specific viscosity η _sp versus concentration c were determined as 1.0, 2.0 and 4.7 for dilute, semidilute unentangled and entangled regimes respectively, which were in accordance with the scaling prediction for neutral polymer in θ solvent. The intrinsic viscosity [η] of the solution was determined to be 253 mL/g at 25 °C. The linear viscoelastic response of the dilute and semidilute unentangled solutions could be described successfully by the Zimm and Rouse model (ν = 0.5 for θ solution) respectively, suggesting that the motion of cellulose chain in [Emim]Ac changed from Zimm to Rouse model with increasing concentration. At low concentrations, failure of the Cox–Merz rule with steady shear viscosity larger than complex viscosity was observed. While as the concentration increased, the deviation from the Cox–Merz rule disappeared due to the formation of homogeneous entanglement structure in cellulose solution.     

Isolation and characterization of cellulose nanoplatelets from the parenchyma cells of <Emphasis Type="Italic">Agave salmiana</Emphasis>

We present a novel nanostructure in the form of cellulose nanoplatelets (CNPs) with an inner array of entangled nanofibrils. The planar structure was isolated from the parenchyma cells of Agave salmiana first using basic pretreatment, then by dissolving lignin and hemicellulose using acid hydrolysis, and finally by modifying the cellulose with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO). The crystallinity index was calculated following the purification process, and it was found that nanocellulose was 30% more crystalline than the raw material. Using transmission electron microscopy, it was found that the nanoplatelets comprise ~2–3 nm long cellulose entangled nanofibrils. In addition, via atomic force microscopy, the morphology of the nanoplatelets was confirmed; they were 90 nm thick for the acid hydrolyzed sample and 70 nm thick for the TEMPO-modified sample; their lateral size varied from a few to hundreds of micrometers, presenting large aspect ratios. Finally, CNPs were isolated and processed into thin paper with a thickness of 100 µm and transmittance of 86%, demonstrating great potential as a transparent film.     

Mechanical properties of films made from dialcohol cellulose prepared by homogeneous periodate oxidation

2,3-Dialdehyde celluloses were prepared by homogeneous periodate oxidation in an aqueous solution of methylol cellulose. Since methylol cellulose stays dissolved in water for a certain time before decomposing gradually into regenerated cellulose, the oxidation reaction progressed homogeneously throughout the period. The resulting dialdehyde cellulose achieved an oxidation level of over 90 % in as little as 12 h. Reducing the dialdehyde celluloses with NaBH₄ resulted in water-soluble dialcohol celluloses, which have an open-ring structure at the C2–C3 position. The dialcohol celluloses were characterized using nuclear magnetic resonance spectrometry, Fourier transform infrared spectroscopy, and differential scanning calorimetry. The T_g of the products decreased with increasing oxidation levels. The products might be processable, and unique tensile properties were obtained by cutting the C2–C3 bonds in the glucopyranose rings. The dialcohol celluloses prepared using a cast method yielded clear and transparent films which showed unique mechanical properties by tensile tests depending on the values of oxidation level.     

Effects of cellulose nanofibrils on the structure and properties on PVA nanocomposites

A green method—joint mechanical grinding and high pressure homogenization—was used to defibrillate paper pulp into nanofibrils. The prepared cellulose nanofibrils (CNF) were then blended with PVA in an aqueous system to prepare transparent composite film. The size and morphology of the nanofibrils and their composites were observed, and the structure and properties were characterized. The results showed that CNFs are beneficial to improve the crystallinity, mechanical strength, Young’s modulus, T _g and thermal stability of the PVA matrix because of their high aspect ratio, crystallinity and good compatibility. Therefore, nano cellulosic fibrils were proven to be an effective reinforcing filler for the hydrophilic polymer matrix. Moreover, the green fabrication approaches will be helpful to build up biodegradable nanocomposites with wide applications in functional environmentally friendly materials.     

Efficient magnetic CoFe2O4 nanocrystal catalyst for aerobic oxidation of cyclohexane prepared by sol–gel auto-combustion method: effects of catalyst preparation parameters

Six magnetic spinel-type CoFe₂O₄ samples were prepared in the form of powder by a simple sol–gel auto-combustion method from precursor solutions with different metal concentrations (0.1–0.3 mol L^?1) and pH values (<1–10). The samples were characterized by X-ray diffractometry, Fourier transform infrared spectrophotometry, transmission electron microscopy and N₂-physisorption. Their catalytic performances for oxidation of cyclohexane were evaluated using oxygen as oxidant in the absence of solvents. The results show that pH values and metal concentrations of precursor solutions play important roles in the sizes, dispersions and morphologies of the CoFe₂O₄ nanoparticles, and thus in their catalytic performances. The sample resulted from precursor solution under the conditions of pH = 7 and metal concentration = 0.1 mol L^?1 with the largest surface area, exhibited the best catalytic performance with the highest cyclohexane conversion of 13.7 % and selectivity of 93.9 % for cyclohexanol and cyclohexanone. The CoFe₂O₄ nanocrystal is also found an efficient catalyst for oxidation of aliphatic and aromatic alkenes.     

Dispersion stability and aggregation behavior of TEMPO-oxidized cellulose nanofibrils in water as a function of salt addition

Dispersion stability of TEMPO-oxidized cellulose nanofibrils (TOCNs) in water was investigated through both experimental and theoretical analyses to elucidate the critical aggregation concentration of different salts. The 0.1 wt% TOCN/water dispersions with various NaCl concentrations were evaluated by measuring light transmittance, viscosity under steady-shear flow, and the weight fraction of TOCN that had aggregated. Homogeneous TOCN/water dispersion turned to gel as the NaCl concentration increased. The TOCN dispersion maintained its homogeneous state up to 50 mM NaCl, but aggregated gel particles were formed at 100 mM NaCl. The mixture became separated into two phases (gel and supernatant) at ≥200 mM NaCl. Theoretical analysis using ζ-potentials of TOCN elements in the dispersions revealed that the aggregation behavior upon NaCl addition could be explained well in terms of the interaction potential energy between two cylindrical rods based on the Derjaguin–Landau–Verwey–Overbeek theory. The experiments were extended to analyze critical aggregation concentrations of MgCl₂ and CaCl₂ for the 0.1 wt% TOCN dispersion. In the case of divalent electrolytes, TOCN elements began to form aggregated gel particles at salt concentrations of 2–4 mM, corresponding to the critical aggregation concentration predicted by the empirical Schultz-Hardy rule.     

Interplay of colloidal stability of cellulose nanocrystals and their dispersibility in cellulose acetate butyrate matrix

Cellulose nanocrystals (CNC) prepared from eucalyptus cellulose CNCs were modified by the reaction with methyl adipoyl chloride, CNCm, or with a mixture of acetic and sulfuric acid, CNCa. The CNC were either dispersed at 0.1 wt% in the pure solvents ethyl acetate (EA), tetrahydrofuran (THF) and dimethylformamide (DMF) or in cellulose acetate butyrate (CAB) solutions prepared in these solvents at 0.9 wt%. The colloidal behavior of these dispersions was systematically investigated using a phase separation analyzer LUMiReader^®. The mechanical properties and morphological features of the films resulting from the mixtures of CAB and CNC were determined by dynamic mechanical analysis, optical microscopy and atomic force microscopy, respectively. Regardless the functional group attached to the surface of CNC, the best colloidal stability was observed for dispersions prepared in CAB/DMF solution. Higher degree of substitution of modified CNCs favored the colloidal stability in EA and THF. Composite films prepared from CAB/DMF solutions were more homogeneous and presented better mechanical performance than those prepared in CAB/EA or CAB/THF. The mechanical performance of composites and neat CAB prepared from DMF was CAB/CNCs > CAB/CNCm > CAB/CNCa > CAB, indicating that the modification weakens the percolation process, which is mediated by H bonding.