Syntheses and Crystal Structures of Ammoniates with the Phenyl‐Substituted Polytin Anions Sn2Ph$\rm{_{\bf 4}^{{\bf 2} - } }$, cyclo‐Sn4Ph$\rm{_{\bf 4}^{{\bf 4} - } }$, and Sn6Ph$\rm{_{{\bf 12}}^{{\bf 2} - } }$

The reaction of diphenyltin dichloride with the binary Zintl phase K₄Sn₉ in the presence of excess lithium and 18‐crown‐6 in liquid ammonia led to the ammoniate [K(18‐crown‐6)(NH₃)₂]₂Sn₂Ph₄ ( 1 ). The analogous reaction with K₄Ge₉ and potassium in the absence of further alkali metal ligands resulted in the compound [K₂(NH₃)₁₂]Sn₆Ph₁₂ ? 4 NH₃ ( 3 ). Cs₆[Sn₄Ph₄](NH₂)₂ ? 8 NH₃ ( 2 ) was prepared by reacting diphenyltin dichloride with a surplus of caesium in liquid ammonia. The low‐temperature single‐crystal structure determinations show all compounds to contain phenyl‐substituted polyanions of tin. Compound 1 is built from Sn₂Ph anions consisting of Sn dumbbells with two Ph substituents at each Sn‐atom. Compound 2 contains cyclo‐Sn₄Ph anions formed by a four‐membered tin ring in butterfly conformation with one Ph substituent at each Sn‐atom in an (all‐trans)‐configuration. Sn₆Ph in 3 is a zig‐zag Sn₆ chain with two substituents at each of the Sn‐atoms. Both 1 and 3 have molecular counter cations, in the latter case the unprecedented dinuclear potassiumammine complex [K₂(NH₃)₁₂]²⁺ is observed. Compound 2 shows a complicated three‐dimensional network of Cs? Sn interactions.     

Structures and formation of \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 4}} {\rm H}_{{\rm 8}} } \right]_{}^{_.^ + } $\end{document} ions

Several \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 4}} {\rm H}_{{\rm\ 8}} } \right]_{}^{_.^ + } $\end{document} ion isomers yield characteristic and distinguishable collisional activation spectra: \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm 1-butene} } \right]_{}^{_.^ + } $\end{document} and/or \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm 2-butene} } \right]_{}^{_.^ + } $\end{document} (a-b), \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm isobutene} } \right]_{}^{_.^ + } $\end{document} (c) and [cyclobutane]⁺ (e), while the collisional activation spectrum of \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm methylcyclopropane} } \right]_{}^{_.^ + } $\end{document} (d) could also arise from a combination of a-b and c. Although ready isomerization may occur for \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 4}} {\rm H}_{{\rm 8}} } \right]_{}^{_.^ + } $\end{document} ions of higher internal energy, such as d or e → a, b, and/or c, the isomeric product ions identified from many precursors are consistent with previously postulated rearrangement mechanisms. 1,4-Eliminations of HX occur in 1-alkanols and, in part, 1-buthanethiol and 1-bromobutane. The collisional activation data are consistent with a substantial proportion of 1,3-elimination in 1- and 2-chlorobutane, although 1,2-elimination may also occur in the latter, and the formation of the methylcycloprpane ion from n-butyl vinyl ether and from n-butyl formate. Surprisingly, cyclohexane yields the \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm linear butene} } \right]_{}^{_.^ + } $\end{document} ions a-b, not \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm cyclobutane} } \right]_{}^{_.^ + } $\end{document}, e.     

Gas phase isomerization of \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 10}} {\rm H}_{{\rm 14}} } \right]_{}^{_.^ + } $\end{document} ions generated from adamantanoid compounds

\documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 10}} {\rm H}_{{\rm 14}} } \right]_{}^{_.^ + } $\end{document} ions have been generated from a number of adamantanoid compounds, both by ionization and ionization followed-by fragmentation. Metastable ion abundance ratios of competitive reactions indicate the decomposition of these ions from common structures in all cases.     

Synthesis,Structures, and Some Reactions of [(Thioacyl)thio]‐ and (Acylseleno)antimony and ‐bismuth Derivatives ((RCSS)xMR$\rm{_{{\bf 3 - }{\bf x}}^{\bf 1} }$ and (RCOSe)xMR$\rm{_{{\bf 3 - }{\bf x}}^{\bf 1} }$ with M = Sb,Bi and x = 1–3)

A series of [(thioacyl)thio]‐ and (acylseleno)antimony and [(thioacyl)thio]‐ and (acylseleno)bismuth, i.e., (RCSS)_xMR and (RCOSe)_xMR (M = Sb, Bi, R¹ = aryl, x = 1–3), were synthesized in moderate to good yields by treating piperidinium or sodium carbodithioates and ‐selenoates with antimony and bismuth halides. Crystal structures of (4‐MeC₆H₄CSS)₂Sb(4‐MeC₆H₄) ( 9b′ ), (4‐MeOC₆H₄COSe)₂Sb(4‐MeC₆H₄) ( 12c′ ), (4‐MeOC₆H₄COS)₂Bi(4‐MeC₆H₄) ( 15c′ ), and (4‐MeOC₆H₄CSS)₂BiPh ( 18c ) along with (4‐MeC₆H₄COS)₂SbPh ( 6b ) and (4‐MeC₆H₄COS)₃Sb ( 7b ) were determined (Figs. 1 and 2). These compounds have a distorted square pyramidal structure, where the aryl or carbothioato (= acylthio) ligand at the central Sb‐ or Bi‐atom is perpendicular to the plane that includes the two carbodithioato (= (thioacyl)thio), carboselenato (= acylseleno), or carbothioato ligand and exist as an enantiomorph pair. Despite the large atomic radii, the C?S ??? Sb distances in (RCSS)₂MR¹ (M = As, Sb, Bi; R¹ = aryl) and the C?O ??? Sb distances in (RCOS)_xMR (M = As, Sb, Bi; x = 2, 3) are comparable to or shorter than those of the corresponding arsenic derivatives (Tables 2 and 3). A molecular‐orbital calculation performed on the model compounds (MeC(E)E¹)_3?xMMe_x (M = As, Sb, Bi; E = O, S; E¹ = S, Se; x = 1, 2) at the RHF/LANL2DZ level supported this shortening of C?E ??? Sb distances (Table 4). Natural‐bond‐orbital (NBO) analyses of the model compounds also revealed that two types of orbital interactions n_S → σ and n_S → σ play a role in the (thioacyl)thio derivatives (MeCSS)_3?xMMe_x (x = 1, 2) (Table 5). In the acylthio‐MeCOSMMe₂ (M = As, Sb, Bi), n_O → σ contributes predominantly to the orbital interactions, but in MeCOSeSbMe₂, none of n_O → σ and n_O → σ contributes to the orbital interactions. The n_S → σ and n_S → σ orbital interactions in the (thioacyl)thio derivatives are greater than those of n_O → σ and n_O → σ in the acylthio and acylseleno derivatives (MeCOE)_3?xMMe_x (E = S, Se; M = As, Sb, Bi; x = 1, 2). ?The reactions of RCOSeSbPh₂ (R = 4‐MeC₆H₄) with piperidine led to the formation of piperidinium diphenylselenoxoantimonate(1?) (= piperidinium diphenylstibinoselenoite) (H₂NC₅H₁₀)⁺Ph₂SbSe^?, along with the corresponding N‐acylpiperidine (Table 6). Similar reactions of the bis‐derivatives (RCOSe)₂SbR¹ (R, R¹ = 4‐MeC₆H₄) with piperidine gave the novel di(piperidinium) phenyldiselenoxoantimonate(2?) (= di(piperidinium) phenylstibonodiselenoite), [(H₂NC₅H₁₀)⁺]₂(PhSbSe₂)^2?, in which the negative charges are delocalized on the SbSe₂ moiety (Table 6). Treatment of RCOSeSbR (R, R¹ = 4‐MeC₆H₄) with N‐halosuccinimides indicated the formation of Se‐(halocyclohexyl) arenecarboselenoates (Table 8). Pyrolysis of bis(acylseleno)arylbismuth at 150° gave Se‐aryl carboselenoates in moderate to good yields (Table 9).     

Transport, thermomechanical, and electrode properties of perovskite-type {\left( {{\hbox{L}}{{\hbox{a}}_{0.{75} - x}}{\hbox{S}}{{\hbox{r}}_{0.{25} + x}}} \right)_{0.{95}}}{\hbox{M}}{{\hbox{n}}_{0.{5}}}{\hbox{C}}{{\hbox{r}}_{0.{5} - x}}{\hbox{T}}{{\hbox{i}}_x}{{\hbox{O}}_{{3} - }}_\delta \left( {x = 0 - 0.{5}} \right)

Increasing Sr²⁺ and Ti⁴⁺ concentrations in perovskite-type $ {\left( {{\hbox{L}}{{\hbox{a}}_{0.{75} - x}}{\hbox{S}}{{\hbox{r}}_{0.{25} + x}}} \right)_{0.{95}}}{\hbox{M}}{{\hbox{n}}_{0.{5}}}{\hbox{C}}{{\hbox{r}}_{0.{5} - x}}{\hbox{T}}{{\hbox{i}}_x}{{\hbox{O}}_{{3} - }}_\delta \left( {x = 0 - 0.{5}} \right) $ results in slightly higher thermal and chemical expansion, whereas the total conductivity activation energy tends to decrease. The average thermal expansion coefficients determined by controlled-atmosphere dilatometry vary in the range (10.8?C14.5)?×?10^?6?K^?1 at 373?C1,373?K, being almost independent of the oxygen partial pressure. Variations of the conductivity and Seebeck coefficient, studied in the oxygen pressure range 10^?18?C0.5?atm, suggest that the electronic transport under oxidizing and moderately reducing conditions is dominated by p-type charge carriers and occurs via a small-polaron mechanism. Contrary to the hole concentration changes, the hole mobility decreases with increasing x. The oxygen permeation fluxes through dense ceramic membranes are quite similar for all compositions due to very low level of oxygen nonstoichiometry and are strongly affected by the grain-boundary diffusion and surface exchange kinetics. The porous electrodes applied onto lanthanum gallate-based solid electrolyte exhibit a considerably better electrochemical performance compared to the apatite-type La₁₀Si₅AlO_26.5 electrolyte at atmospheric oxygen pressure, while Sr²⁺ and Ti⁴⁺ additions have no essential influence on the polarization resistance. In H₂-containing gases where the electronic transport in $ {\left( {{\hbox{L}}{{\hbox{a}}_{0.{75} - x}}{\hbox{S}}{{\hbox{r}}_{0.{25} + x}}} \right)_{0.{95}}}{\hbox{M}}{{\hbox{n}}_{0.{5}}}{\hbox{C}}{{\hbox{r}}_{0.{5} - x}}{\hbox{T}}{{\hbox{i}}_x}{{\hbox{O}}_{{3} - }}_\delta $ perovskites becomes low, co-doping deteriorates the anode performance, which can be however improved by infiltrating Ni and $ {\hbox{Ce}}{{\hbox{O}}_{{\rm{2}} - }}_\delta $ v into the porous oxide electrode matrix.     

Layer-by-layer assembly of Ru3+ and $$ {\text{Si}}_{{\text{8}}} {\text{O}}^{{8 - }}_{{20}} $$ into electrochemically active silicate films

A porous silicate is obtained from octa-anionic cage-like poly-silicate (PS) and Ru³⁺ cations in an ethanol-based layer-by-layer assembly process. Electrochemical experiments (voltammetry and impedance spectroscopy) confirm the formation of redox-active ruthenium centers in the form of hydrous ruthenium oxide throughout the film deposit. Oxidation of Ru(III) to Ru(IV) at a potential below 0.5 V vs saturated Calomel electrode (SCE) is reversible, but a potential positive of 0.5 V vs SCE is associated with an irreversible change in reactivity, which is characteristic for very small hydrous ruthenium oxide nanoparticles. Further voltammetric experiments are performed in aqueous phosphate buffer solutions, and the effects of number of layers, scan rate, and pH are investigated. Three aqueous redox systems are studied in contact with the PS–Ru³⁺ films. The reduction of cationic methylene blue adsorbed onto the negative surface of the nanocomposite silicate is shown to occur, although most of the bound methylene blue appears to be electrochemically inactive either bound to silicate or buried into small pores. The PS–Ru³⁺-catalyzed oxidations of hydroquinone and arsenite(III) are investigated. Scanning electron microscopy images show that a macroscopically uniform porous surface is formed after deposition of 50 layers of the PS–Ru³⁺ nanocomposite. However, atomic force microscopy images demonstrate that in the initial deposition stages, irregular island growth occurs. The average rate of thickness increase for PS–Ru³⁺ nanocomposite films is 6 nm per deposition cycle.     

$$ {{\text{C}}_{\alpha }} - {\text{C}} $$ Bond Cleavage of the Peptide Backbone in MALDI In-Source Decay Using Salicylic Acid Derivative Matrices

The use of 5-formylsalicylic acid (5-FSA) and 5-nitrosalicylic acid (5-NSA) as novel matrices for in-source decay (ISD) of peptides in matrix-assisted laser desorption/ionization (MALDI) is described. The use of 5-FSA and 5-NSA generated a- and x-series ions accompanied by oxidized peptides [M – 2 H + H]⁺. The preferential formation of a- and x-series ions was found to be dependent on the hydrogen-accepting ability of matrix. The hydrogen-accepting ability estimated from the ratio of signal intensity of oxidized product [M – 2 H + H]⁺ to that of non-oxidized protonated molecule [M + H]⁺ of peptide was of the order 5-NSA > 5-FSA > 5-aminosalicylic acid (5-ASA) ≒ 2,5-dihydroxyl benzoic acid (2,5-DHB) ≒ 0. The results suggest that the hydrogen transfer reaction from peptide to 5-FSA and 5-NSA occurs during the MALDI-ISD processes. The hydrogen abstraction from peptides results in the formation of oxidized peptides containing a radical site on the amide nitrogen with subsequent radical-induced cleavage at the \textC_a - \textC {{\text{C}}_{\alpha }} - {\text{C}} bond, leading to the formation of a- and x-series ions. The most significant feature of MALDI-ISD with 5-FSA and 5-NSA is the specific cleavage of the \textC_a - \textC {{\text{C}}_{\alpha }} - {\text{C}} bond of the peptide backbone without degradation of side-chain and post-translational modifications (PTM). The matrix provides a useful complementary method to conventional MALDI-ISD for amino acid sequencing and site localization of PTMs in peptides.     

Theoretical and computational modelling of functionalization energy for the {\rm{C}}_{{6{n}}^{2}} {\rm{H}}_{6{n}} polycyclic aromatic hydrocarbons (PAHs) homologue series

Based on the free electron metallic disc model, the derivation of a simple expression for evaluation of the Fukui function for the molecular models of polycyclic aromatic hydrocarbons (PAHs) of the general formula $ {\rm{C}}_{{6{n}}^{2}} {\rm{H}}_{6{n}} $ was described. We also investigated the functionalization energy with OH radicals for the molecular models of PAHs (n = 1–6). Our metallic disc model-based functionalization reaction energy was in agreement with the DFT:B3LYP/6-31G(d) calculated values. Asymptotic values of the functionalization energies ( $ {{n}} \to \infty $ ) were predicted to be ?30.1 ± 0.1 and ?8.7 ± 0.1 kcal/mol for the external and internal border carbon atoms, respectively.     

On the loss of ethylene from [C3H7O]+ ions of structure \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm CH}_{\rm 2} \mathop {{\rm CHOH}}\limits^{\rm + } $\end{document}

The results of some ³C and ²H labelling experiments plus some measurements of reaction thermochemistry and translational energy releases, permit a significant simplification of the mechanistic pathways by which [C₃H₇O]⁺ ions of structure fragment by loss of C₂H₄. The relationships between these ions and some of their isomeric forms are explored and clarified.     

Unimolecular reactions of isolated organic ions: The chemistry of the unsaturated oxonium ion \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 2} = {\rm CHCH =}\mathop {{\rm OCH}_{\rm 3}}\limits^{\rm +} $\end{document}

The reactions of metastable $ {\rm CH}_{\rm 2} = {\rm CHCH =}\mathop {{\rm OCH}_{\rm 3}}\limits^{\rm +} $ oxonium ions generated by alkyl radical loss from ionized allylic alkenyl methyl ethers are reported and discussed. Three main reactions occur, corresponding to expulsion of H₂O, C₂H₄/CO and CH₂O. There is also a very minor amount of C₃H₆ elimination. The mechanisms of these processes have been probed by ²H- and ¹³C-labelling experiments. Special attention is given to the influence of isotope effects on the kinetic energy release accompanying loss of formaldehyde from ²H-labelled analogues of $ {\rm CH}_{\rm 2} = {\rm CHCH =}\mathop {{\rm OCH}_{\rm 3}}\limits^{\rm + } $. Suggestions for interpreting these reactions in terms of routes involving ion–neutral complexes are put forward.     

On the topology of the electron density of ${\mathrm {H}}_{3}^{+}$

The topology of the electron density ρ(r) of \({\mathrm {H}}_{3}^{+}\) is revisited by series of ultra fine tuned geometry optimizations within Hartree-Fock self-consistent virial scaling (SCVS) approach in combination with correlation consistent cc-pVXZ basis sets. The calculations are extended to approach the Hartree-Fock complete basis set (CBS) limit. It is discussed that within such tuned ab initio calculations, the sources of errors that are mapped to the final density matrix in normal calculations are essentially eliminated. The results of electron density analysis on such error-free ρ(r) function via the quantum theory of atoms in molecules (QTAIM) confirm unambiguously the non-nuclear attractor (NNA) as the fundamental topological building block (together with three H atomic basins) to describe the bonding in \({\mathrm {H}}_{3}^{+}\) ion-molecule. The convergence patterns of the values of different density-dependent properties toward CBS limit are also explored. It is reported that the cc-pVXZ sets are not only energy-consistent but also density-consistent. Therefore, on the basis of this important density consistency behavior, the CBS limit values of different atomic and bonding indexes are estimated and ultimately the structure and bonding pattern of \({\mathrm {H}}_{3}^{+}\) are concluded.     

On the electronic structure of Li2 (X 1\documentclass{article}\pagestyle{empty}\begin{document}$\Sigma^{+}_{\mathrm{g}}$\end{document}) and its changes with internuclear distance

A compact, yet accurate, and strictly virial‐compliant ab initio electronic wavefunction for ground‐state Li₂ is exploited for a study of the molecule's electronic structure and electron density. Symmetry‐breaking problems that emerge at the single‐configuration level are solved in a multiconfigurational spin‐coupled approach that enables simultaneous optimization of angularly correlated “resonating” configurations. Particular emphasis is placed on the accurate determination of the electron density's bifurcation points and of the quadrupole moment as a function of internuclear distance R. Tentative connections are drawn between the R dependence of the electron density's topological structure and quadrupole moment and that of the electronic wavefunction. Computation of the latter constitutes the first application to systems other than isolated atoms of the optimized basis set generalized multiconfiguration spin‐coupled method, which entails use of nonorthogonal orbitals and Slater‐type basis functions with variationally optimized exponential parameters. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 78: 378–397, 2000     

Electrochemical Detection of ClO$\rm{ {_{3}^{-}}}$, BrO$\rm{ {_{3}^{-}}}$, and IO$\rm{ {_{3}^{-}}}$ at a Phosphomolybdic Acid Linked 3‐Aminopropyl‐Trimethoxysilane Modified Electrode

A composite film modified electrode containing a Keggin‐type heteropolyanion, H₃(PMo₁₂O₄₀)?H₂O, was fabricated with 3‐aminopropyltrimethoxysilane (APMS) attached on an electrochemically activated glassy carbon (GC) electrode through the formation of C? O? Si bond. PMo₁₂O was then complexed with APMS through the electrostatic interaction between the phosphate groups of PMo₁₂O and amine groups of APMS (PMo₁₂O ‐APMS). XPS and cyclic voltammetry were employed for characterization of the composite film. The PMo₁₂O ‐APMS modified electrode showed three reversible redox pairs with smaller peak‐separation and was stable in the larger pH range compared with that in a solution phase. The catalytic properties of the modified electrode for the reduction of ClO , BrO , and IO were studied and the modified electrode exhibited good electrocatalytic activities for the three anions. The experimental parameters, such as pH, temperature, and the applied potential were optimized. The detection limits were determined to be 7.0±0.35 μM, 4.0±0.17 μM, and 0.1±0.04 μM for ClO , BrO , and IO , respectively. The modified electrode was applied to natural water samples for the detection of ClO , BrO , and IO .