脂肪醇氨氧化反应制备脂肪腈研究进展北大核心CSCD

脂肪腈是一类非常重要的化工原料和中间体,被广泛应用于医药、农用化学品、染料和合成树脂等领域.在诸多合成脂肪腈的路线中,脂肪醇氨氧化制备脂肪腈的路线使用可源于生物质资源的脂肪醇为原料,有助于“碳中和”和“碳达峰”目标的实现;同时,该反应副产物为水或氢气,符合“绿色”可持续发展的要求,具有重要的研究价值.根据脂肪醇氨氧化制备脂肪腈的过程中是否需要向体系中提供氧气,氨氧化过程可分为需氧氧化-氨化反应和脱氢氧化-氨化反应两类.需氧氧化-氨化反应在均相催化体系和非均相催化体系中均具有相关研究,而脱氢氧化-氨化反应的研究则主要集中在非均相体系中.按照以上分类,综述了脂肪醇氨氧化制备脂肪腈催化体系的研究进展,分析了不同种类催化体系的优势与尚存在的不足,并展望了该反应催化体系未来发展的方向.     

氧化铝负载的银纳米颗粒高选择性催化合成亚胺(英)

The oxidative dehydrogenation of alcohols to aldehydes catalyzed by Ag nanoparticles supported on Al_2O_3 was studied.The catalyst promoted the direct formation of imines by tandem oxidative dehydrogenation and condensation of alcohols and amines.The reactions were performed under mild conditions and afforded the imines in high yield(up to 99%) without any byproducts other than H_2O.The highest activity was obtained over 5 wt%Ag/Al_2O_3 in toluene with air as oxidant.The reactions were also performed under oxidant-free conditions where the reaction was driven to the product side by the production of H_2 in the gas phase.The use of an efficient and selective Ag catalyst for the oxidative dehydrogenation of alcohol in the presence of amines gives a new green reaction protocol for imine synthesis.     

氧化铝负载的银纳米颗粒高选择性催化合成亚胺(英)

The oxidative dehydrogenation of alcohols to aldehydes catalyzed by Ag nanoparticles supported on Al₂O₃ was studied.The catalyst promoted the direct formation of imines by tandem oxidative dehydrogenation and condensation of alcohols and amines.The reactions were performed under mild conditions and afforded the imines in high yield（up to 99%） without any byproducts other than H₂O.The highest activity was obtained over 5 wt%Ag/Al₂O₃ in toluene with air as oxidant.The reactions were also performed under oxidant-free conditions where the reaction was driven to the product side by the production of H₂ in the gas phase.The use of an efficient and selective Ag catalyst for the oxidative dehydrogenation of alcohol in the presence of amines gives a new green reaction protocol for imine synthesis.     

A direct synthesis of β-carbolines via a three-step one-pot domino approach with a bifunctional Pd/C/K-10 catalyst

A rapid, microwave-assisted synthesis of β-carbolines via a successive condensation/cyclization/dehydrogenation approach is described. This methodology involves the coupling of various tryptamines with aromatic aldehydes/glyoxals. The product imine undergoes a Pictet-Spengler cyclization followed by a final dehydrogenation to yield β-carbolines in a three-step domino reaction. The use of the bifunctional catalyst Pd/C/K-10 combined with microwave irradiation enabled the synthesis of β-carbolines in short reaction times and in good to excellent yields.     

Aerobic Alcohol Ammoxidation Catalyzed by Copper(I)/Amino Acid: a Scalable Protocol to Nitriles

A facile, practical and scalable catalyst system for alcohols ammoxidation into nitriles was developed using amino acid as ligand, oxygen as terminal oxidant and copper iodide(CuI) as catalyst. The catalyst system shows excellent functional groups compatibility for a wide range of testing substrates, even the substrates bearing oxidation- sensitive groups such as MeS-, alkenyl and -NH₂ can also work well. In addition, the protocol is readily scaled up to more than 20 g and the product can be obtained just through filtration or distillation without conventional column chromatography.     

采用燃烧技术制备CuO纳米粒子:一种高效且环境友好的用于芳族醛合成芳族腈催化剂(英文)

CuO nanoparticles were synthesized using an energy-efficient and rapid solution combustion technique with malic acid employed as a fuel. The combustion-derived CuO nanoparticles were used as catalysts in a one-pot synthesis of aromatic nitriles from aromatic aldehydes and hydroxylamine hydrochloride. The catalyst was characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, transmission electron microscopy, and Brunauer-Emmett-Teller surface area analysis. The catalytic activity of the CuO nanoparticles in the synthesis of aromatic nitriles from aromatic aldehydes was evaluated. The present protocol offers the advantages of a clean reaction, simple methodology, short reaction duration (1-2 min), and high yield (85%-98%). The catalytic activity of the CuO nanoparticles was found to be higher than that of bulk CuO powder under the same conditions. The catalyst can also be recovered and reused up to four times with no significant loss of catalytic activity. The present approach is inexpensive and is a convenient technique suitable for industrial production of CuO nanoparticles and nitriles.     

Highly efficient and convenient Strecker reaction of carbonyl compounds and amines with TMSCN catalyzed by MCM-41 anchored sulfonic acid as a recoverable catalyst

MCM-41 anchored sulfonic acid (MCM-41–SO₃H) was found to be a highly efficient and recoverable heterogeneous catalyst for the three-component Strecker reaction of aldehydes or ketones and diverse amines using trimethylsilyl cyanide (TMSCN) to afford the corresponding α-amino nitriles under mild conditions in high to quantitative yields. The simple experimental procedure along with easy recovery and reusability of the catalyst has led to development of a clean and environmentally friendly approach for the synthesis of α-amino nitriles.     

I2/TBHP promoted oxidative C–N bond formation at room temperature: Divergent access of 2-substituted benzimidazoles involving ring distortion

A new ‘one pot’ tandem synthesis of 2-substituted benzimidazoles has been developed from 2-aminobenzyl alcohol/2-aminobenzamide and different coupling partners (nitriles, aldehydes and 1,3-diketones) via iodine and TBHP promoted oxidative ring contraction. The present strategy involves sequential C–N bond formation, cyclization, subsequent ring contraction and dehydrogenation to afford various medicinally important benzimidazole derivatives in moderate to good yields. This operationally simple synthetic approach proceeds at room temperature under base-free condition, broadly applicable to a wide array of nitriles and aldehydes bearing oxidation prone functional groups and noteworthy to mention that various acyclic 1,3-diketones undergo selective C–C bond cleavage leading to 2-alkyl benzimidazoles under mild condition.     

One-Pot Synthesis of Heterobimetallic Metal–Organic Frameworks (MOFs) for Multifunctional Catalysis

A one-pot synthesis of bimetallic metal–organic frameworks (Co/Fe-MOFs) was achieved by treating stoichiometric amounts of Fe and Co salts with 2-aminoterephthalic acid (NH₂-BDC). Monometallic Fe (catalyst A) and Co (catalyst F) were also prepared along with mixed-metal Fe/Co catalysts (B–E) by changing the Fe/Co ratio. For mixed-metal catalysts (B–E) SEM energy-dispersive X-ray (EDX) analysis confirmed the incorporation of both Fe and Co in the catalysts. However, a spindle-shaped morphology, typically known for the Fe-MIL-88B structure and confirmed by PXRD analysis, was only observed for catalysts A–D. To test the catalytic potential of mixed-metal MOFs, reduction of nitroarenes was selected as a benchmark reaction. Incorporation of Co enhanced the activity of the catalysts compared with the parent NH₂-BDC-Fe catalyst. These MOFs were also tested as electrocatalysts for the oxygen evolution reaction (OER) and the best activity was exhibited by mixed-metal Fe/Co-MOF (Fe/Co batch ratio=1). The catalyst provided a current density of 10 mA cm⁻² at 410 mV overpotential, which is comparable to the benchmark OER catalyst (i.e., RuO₂). Moreover, it showed long-term stability in 1 m KOH. In a third catalytic test, dehydrogenation of sodium borohydride showed high activity (turnover frequency=87 min⁻¹) and hydrogen generation rate (67 L min⁻¹ g⁻¹ catalyst). This is the first example of the synthesis of bimetallic MOFs as multifunctional catalysts particularly for catalytic reduction of nitroarenes and dehydrogenation reactions.     

A facile one-pot synthesis of ruthenium hydroxide nanoparticles on magnetic silica: aqueous hydration of nitriles to amides

One-pot synthesis of ruthenium hydroxide nanoparticles on magnetic silica is described which involves the in situ generation of magnetic silica (Fe(3)O(4)@SiO(2)) and ruthenium hydroxide immobilization; the hydration of nitriles occurs in high yield and excellent selectivity using this catalyst which proceeds exclusively in aqueous medium under neutral conditions.     

Aerobic oxidative transformation of primary azides to nitriles by ruthenium hydroxide catalyst

In the presence of an easily prepared supported ruthenium hydroxide catalyst, Ru(OH)(x)/Al(2)O(3), various kinds of structurally diverse primary azides including benzylic, allylic, and aliphatic ones could be converted into the corresponding nitriles in moderate to high yields (13 examples, 65-94% yields). The gram-scale (1 g) transformation of benzyl azide efficiently proceeded to give benzonitrile (0.7 g, 90% yield) without any decrease in the performance in comparison with the small-scale (0.5 mmol) transformation. The catalysis was truly heterogeneous, and the retrieved catalyst could be reused for the transformation of benzyl azide without an appreciable loss of its high performance. The present transformation of primary azides to nitriles likely proceeds via sequential reactions of imide formation, followed by dehydrogenation (β-elimination) to produce the corresponding nitriles. The Ru(OH)(x)/Al(2)O(3) catalyst could be further employed for synthesis of amides in water through the transformation of primary azides (benzylic and aliphatic ones) to nitriles, followed by sequent hydration of the nitriles formed. Additionally, direct one-pot synthesis from alkyl halides and TBAN(3) (TBA = tetra-n-butylammonium) could be realized with Ru(OH)(x)/Al(2)O(3), giving the corresponding nitriles in moderate to high yields (10 examples, 64-84% yields).     

Enantioselective synthesis of alpha-amino nitriles from N-benzhydryl imines and HCN with a chiral bicyclic guanidine as catalyst

[formula: see text] A novel catalytic enantioselective Strecker synthesis of chiral alpha-amino nitriles and alpha-amino acids is described and analyzed with regard to the possible mechanistic basis for stereoselectivity. Key features of the enantioselective process include (1) the use of the chiral bicyclic guanidine 1 as catalyst and (2) the use of the N-benzhydryl substituent on the imine substrate.     

Catalyst-free,efficient and one pot protocol for synthesis of nitriles from aldehydes using glycerol as green solvent

We described herein the novel, efficient and one-pot catalyst free protocol for the synthesis of nitriles from aldehydes by using hydroxyl amine hydrochlorides in glycerol as a green solvent. This protocol was efficiently used for transformation of aromatic aldehydes bearing electron-withdrawing and electron-donating groups into a aryl nitriles in good to excellent yields. The methodology offers a very simple, efficient and environmentally benign procedure.     

Pd/C促进的四氢异喹啉高选择性部分脱氢(英文)

采用K3PO4?3H2O修饰的Pd/C为催化剂实现了取代四氢异喹啉高选择性部分脱氢,并成功地避免了当量有害氧化剂的使用.多相催化剂Pd/C对四氢异喹啉化合物具有催化脱氢活性,但反应选择性较差,同时产生完全脱氢的芳构化产物异喹啉.而K3PO4?3H2O修饰的Pd/C催化剂能有效提高脱氢反应的化学选择性,在最优条件下可获得最高89%的分离收率.这为取代3,4-二氢异喹啉的合成提供了一种简便、高原子经济性和高化学选择性的反应途径.此外,该多相催化剂可回收循环使用多次,且活性和选择性基本保持不变.     

Silica-bonded S-sulfonic acid: an efficient and recyclable solid acid catalyst for the three-component synthesis of α-amino nitriles

Silica-bonded S-sulfonic acid (SBSSA) is employed as a recyclable catalyst for the synthesis of α-amino nitriles. These syntheses were performed via a one-pot three-component condensation of aldehydes, amines, and trimethylsilyl cyanide under mild reaction conditions at room temperature.     

Fe_3O_4纳米粒子作为高效、可重复使用催化剂用于无溶剂条件下合成9,9-二甲基-9,10-二氢-8H-苯并[α]占吨11(12H)-酮（英文）

A simple and efficient method for the synthesis of 9,9‐dimethyl‐9,10‐dihydro‐8H‐benzo‐[α]xanthen‐11(12)‐one derivatives (DDBXs) was developed by the condensation reaction of various substituted aryl aldehydes with 2‐naphthol and dimedone using Fe3O4 magnetic nanoparticles (MNPs) as a heterogeneous catalyst under solvent‐free conditions at 90–110 °C.The experimental procedure is very simple,the products are formed in high yields and the catalyst is easily separated by applying an external magnetic field.     

Aerobic oxidation of benzylic aldehydes to acids catalyzed by iron （Ⅲ） meso-tetraphenylporphyrin chloride under ambient conditions

Highly efficient aerobic oxidation of benzylic aldehydes to the corresponding acids catalyzed by iron (Ⅲ) meso-tetraphe- nylporphyrin chloride (Fe(TPP)Cl) under ambient conditions was developed.The catalyst has been proved to be an excellent catalyst for the system in the presence of molecular oxygen and isobutryaldehyde at room temperature.     

Impregnated palladium on magnetite as catalyst for multicomponent reductive amination reactions and other related reducing processes

The impregnated palladium on magnetite catalyst is a versatile system for different reduction processes using inexpensive polymehtylhydrosiloxane, including multicomponent reductive amination reactions, and aldehyde, imine, sulfinimide and sulfoxide reductions. This catalyst avoids the use of any type of expensive and quite expensive organic ligand, showing excellent yields, under mild reaction conditions. The catalyst is easily removed from the reaction medium, just by using a magnet. The catalytic system is very selective permitting the discrimination between ketones and aldehydes in the reductive amination process.     

Catalytic Hydrogen Production by Ruthenium Complexes from the Conversion of Primary Amines to Nitriles: Potential Application as a Liquid Organic Hydrogen Carrier

The potential application of the primary amine/nitrile pair as a liquid organic hydrogen carrier (LOHC) has been evaluated. Ruthenium complexes of formula [(p‐cym)Ru(NHC)Cl₂] (NHC=N‐heterocyclic carbene) catalyze the acceptorless dehydrogenation of primary amines to nitriles with the formation of molecular hydrogen. Notably, the reaction proceeds without any external additive, under air, and under mild reaction conditions. The catalytic properties of a ruthenium complex supported on the surface of graphene have been explored for reutilization purposes. The ruthenium‐supported catalyst is active for at least 10 runs without any apparent loss of activity. The results obtained in terms of catalytic activity, stability, and recyclability are encouraging for the potential application of the amine/nitrile pair as a LOHC. The main challenge in the dehydrogenation of benzylamines is the selectivity control, such as avoiding the formation of imine byproducts due to transamination reactions. Herein, selectivity has been achieved by using long‐chain primary amines such as dodecylamine. Mechanistic studies have been performed to rationalize the key factors involved in the activity and selectivity of the catalysts in the dehydrogenation of amines. The experimental results suggest that the catalyst resting state contains a coordinated amine.     

Efficient synthesis of β-acetamido ketones using BF3/Et2O: a fertile approach toward avoiding usage of acetyl chloride

Abstract

A simple and efficient one pot synthesis of β-acetamido ketones from reaction of aldehydes, enolizable ketones, alkyl/aryl nitriles, and BF₃/Et₂O catalyst under microwave irradiations is described. This method allows synthesis of β-acetamido ketones without using corrosive and hazardous acetyl chloride. It is applicable for diversified aldehydes and active methylene ketones supported by synthesizing varieties of β-acetamido ketones. As per literature, majority of synthetic methods of β-acetamido ketones are restricted to use of acetonitrile lonely, as a nitrile component. This method is found to be equally effective for range of nitriles, also. Key features of reported method are simple reaction protocol, better yields, shorter reaction time, and nonhazardous reaction conditions which support the “Green Chemistry approach.”