固定化有机改进剂RP－HPLC固定相的研究

通过在ＲＰＨＰＬＣ固定相Ｃ１８表面键合氨基硅烷，引入氨基基团，将有机改进剂固定至硅胶键合相表面，克服了固定相表面硅羟基对含氮有机化合物的不可逆吸附。以最简单的ＣＨ３ＯＨ－Ｈ２Ｏ洗脱体系即能获得含氮有机物的最佳分离，从而可简化分离操作，提高柱寿命，降低分离成本。     

固定化有机改进剂RP－HPLC固定相的研究

通过在ＲＰＨＰＬＣ固定相Ｃ１８表面键合氨基硅烷，引入氨基基团，将有机改进剂固定至硅胶键合相表面，克服了固定相表面硅羟基对含氮有机化合物的不可逆吸附。以最简单的ＣＨ３ＯＨ－Ｈ２Ｏ洗脱体系即能获得含氮有机和的最佳分离，从而可简化分离操作，提高柱寿命，降低分离成本。     

Polymorphism and luminescence properties of CMONS organic crystals: bulk crystals and nanocrystals confined in gel-glasses

In order to compare the polymorphism of 1-cyano-1-(4-nitrophenyl)-2-(4-methoxyphenyl)ethene CMONS crystallized in solutions to that of CMONS nanocrystals grown in the pores of dense sol-gel matrices, we have first studied the CMONS polymorphism in various solvents which were then used in the nanocrystallization processes. The different polymorphs were characterized by differential scanning calorimetry, X-ray diffraction and absorption as well as luminescence spectroscopies. The differences observed between CMONS powders and CMONS nanocrystals illustrate the role played by the silicate matrices on the polymorphism of CMONS. This matrix effect would be used to stabilize a particular polymorph of an organic phase and thus to adjust the optical properties of the nanocomposite hybrid organic–inorganic material.     

Quaternary nitrogen redox centers for battery materials

Rechargeable batteries using redox-active organics as the electrode material have been proposed to be a promising alternative to lessen the reliance on unrenewable resources and to broaden the chemistry of current battery technology. However, organic materials, particularly for the battery cathode, are encountered with unsatisfactory stability and relatively low redox potential compared with the inorganic counterparts. This review introduces some recent advances of redox-active organics based on quaternary nitrogen redox centers with a focus on molecular design. The challenges and possible solutions are also introduced from the perspective of cell chemistry.     

Phosphorescence Energy Transfer: Ambient Afterglow Fluorescence from Water-Processable and Purely Organic Dyes via Delayed Sensitization

Ambient afterglow luminescence from metal-free organic chromophores would provide a promising alternative to the well-explored inorganic phosphors. However, the realization of air-stable and solution-processable organic afterglow systems with long-lived triplet or singlet states remains a formidable challenge. In the present study, a delayed sensitization of the singlet state of organic dyes via phosphorescence energy transfer from organic phosphors is proposed as an alternative strategy to realize “afterglow fluorescence”. This concept is demonstrated with a long-lived phosphor as the energy donor and commercially available fluorescent dyes as the energy acceptor. Triplet-to-singlet Förster-resonance energy-transfer (TS-FRET) between donor and acceptor chromophores, which are co-organized in an amorphous polymer matrix, results in tuneable yellow and red afterglow from the fluorescent acceptors. Moreover, these afterglow fluorescent hybrids are highly solution-processable and show excellent air-stability with good quantum yields.     

Metal-free inorganic ligands for colloidal nanocrystals: S2-, HS-, Se2-, HSe-, Te2-, HTe-, TeS3(2-), OH-, and NH2- as surface ligands

All-inorganic colloidal nanocrystals were synthesized by replacing organic capping ligands on chemically synthesized nanocrystals with metal-free inorganic ions such as S(2-), HS(-), Se(2-), HSe(-), Te(2-), HTe(-), TeS(3)(2-), OH(-) and NH(2)(-). These simple ligands adhered to the NC surface and provided colloidal stability in polar solvents. The versatility of such ligand exchange has been demonstrated for various semiconductor and metal nanocrystals of different size and shape. We showed that the key aspects of Pearson's hard and soft acids and bases (HSAB) principle, originally developed for metal coordination compounds, can be applied to the bonding of molecular species to the nanocrystal surface. The use of small inorganic ligands instead of traditional ligands with long hydrocarbon tails facilitated the charge transport between individual nanocrystals and opened up interesting opportunities for device integration of colloidal nanostructures.     

Designing Efficient and Ultralong Pure Organic Room‐Temperature Phosphorescent Materials by Structural Isomerism

Pure organic materials with ultralong room‐temperature phosphorescence (RTP) are attractive alternatives to inorganic phosphors. However, they generally show inefficient intersystem crossing (ISC) owing to weak spin–orbit coupling (SOC). A design principle based on the realization of small energy gap between the lowest singlet and triplet states (ΔE_ST) and pure ππ* configuration of the lowest triplet state (T₁) via structural isomerism was used to obtain efficient and ultralong RTP materials. The meta isomer of carbazole‐substituted methyl benzoate exhibits an ultralong lifetime of 795.0 ms with a quantum yield of 2.1 %. Study of the structure–property relationship shows that the varied steric and conjugation effects imposed by ester substituent at different positions are responsible for the small ΔE_ST and pure ππ* configuration of T₁.     

Phosphorescence Energy Transfer: Ambient Afterglow Fluorescence from Water‐Processable and Purely Organic Dyes via Delayed Sensitization

Ambient afterglow luminescence from metal‐free organic chromophores would provide a promising alternative to the well‐explored inorganic phosphors. However, the realization of air‐stable and solution‐processable organic afterglow systems with long‐lived triplet or singlet states remains a formidable challenge. In the present study, a delayed sensitization of the singlet state of organic dyes via phosphorescence energy transfer from organic phosphors is proposed as an alternative strategy to realize “afterglow fluorescence”. This concept is demonstrated with a long‐lived phosphor as the energy donor and commercially available fluorescent dyes as the energy acceptor. Triplet‐to‐singlet Förster‐resonance energy‐transfer (TS‐FRET) between donor and acceptor chromophores, which are co‐organized in an amorphous polymer matrix, results in tuneable yellow and red afterglow from the fluorescent acceptors. Moreover, these afterglow fluorescent hybrids are highly solution‐processable and show excellent air‐stability with good quantum yields.     

Hybrid Organic/Inorganic Materials Depth Profiling Using Low Energy Cesium Ions

The structures developed in organic electronics, such as organic light emitting diodes (OLEDs) or organic photovoltaics (OPVs) devices always involve hybrid interfaces, joining metal or oxide layers with organic layers. No satisfactory method to probe these hybrid interfaces physical chemistry currently exists. One promising way to analyze such interfaces is to use in situ ion beam etching, but this requires ion beams able to depth profile both inorganic and organic layers. Mono- or diatomic ion beams commonly used to depth profile inorganic materials usually perform badly on organics, while cluster ion beams perform excellently on organics but yield poor results when organics and inorganics are mixed. Conversely, low energy Cs⁺ beams (<500 eV) allow organic and inorganic materials depth profiling with comparable erosion rates. This paper shows a successful depth profiling of a model hybrid system made of metallic (Au, Cr) and organic (tyrosine) layers, sputtered with 500 eV Cs⁺ ions. Tyrosine layers capped with metallic overlayers are depth profiled easily, with high intensities for the characteristic molecular ions and other specific fragments. Metallic Au or Cr atoms are recoiled into the organic layer where they cause some damage near the hybrid interface as well as changes in the erosion rate. However, these recoil implanted metallic atoms do not appear to severely degrade the depth profile overall quality. This first successful hybrid depth profiling report opens new possibilities for the study of OLEDs, organic solar cells, or other hybrid devices.

Open image in new window

Graphical Abstract ?

     

Prediction of the molar volume at the normal boiling point

A group contribution method for the prediction of the molar volume at the normal boiling point has been developed. The method can be used for organic and inorganic compounds. It cannot be used for elements and diatomic molecules. Group contributions are shown for a wide variety of hydrocarbons, organic halogen compounds, organic oxygen compounds, organic nitrogen compounds, organic sulfur compounds, organic boron compounds, organic silicon compounds, miscellaneous organics, and many inorganic compounds.Contrary to the corresponding states methods for the prediction of molar volumes, knowledge of critical properties, acentric factors, and reference volumes is not needed.     

Room temperature phosphorescence from organic luminogens in“non-crystalline” state

ABSTRACT

The field of room temperature phosphorescence (RTP) from purely organic materials has made rapid strides in recent years primarily due to its tremendous promise in the areas of photovoltaics, photocatalysis, bioimaging, sensing, etc. Although, the RTP properties, at one time, were considered to be exclusive features of organometallic and inorganic phosphors, a great progress in the molecular design coupled with a much better understanding of the triplet state stabilisation has led to the creation of a plethora of organic RTP materials in the current decade. In this focussed review, a special category of organic luminogens which, rather remarkably, exhibit efficient RTP emission in amorphous or fluidic state is discussed. A few selected examples of such ‘non-crystalline’ organic RTP luminogens are highlighted with an emphasis on the basic design principles and the strategies to increment the phosphorescence efficiency.     

Maghemite nanocrystal impregnation by hydrophobic surface modification of mesoporous silica

Here, we report the design of a hybrid inorganic/organic mesoporous material through simultaneous pore engineering and hydrophobic surface modification of the intramesochannels to improve the uptake of superparamagnetic maghemite nanocrystals via impregnation techniques. The mesoporous material of the SBA-15 type was functionalized in situ with thiol organo-siloxane groups. Restricting the addition of the thiol organo-siloxane to 2 mol % yielded an inorganic/organic hybrid material characterized by large pores and a well-ordered hexagonal p6mm mesophase. The hydrophobic surface modification promoted the incorporation of 7.5 nm maghemite (gamma-Fe2O3) nanocrystals, prepared through temperature-controlled decomposition of iron pentacarbonyl in organic solvents. The hydrophobic, oleic acid capped superparamagnetic maghemite nanocrystals were incorporated into the porous network via wet impregnation from organic suspensions. Combining diffraction, microscopy, and adsorption data confirmed the uptake of the nanocrystals within the intramesochannels of the silica host. Magnetization dependencies on magnetic field at different temperatures show a constriction in the loop around the origin, which indicates immobilization of maghemite nanocrystals inside the thiol-functionalized silica host.     

Exploiting Metallophilicity for the Assembly of Inorganic Nanocrystals and Conjugated Organic Molecules

The accurate engineering of interfaces between inorganic nanocrystals and semiconducting organic molecules is currently viewed as key for further developments in critical fields such as photovoltaics and photocatalysis. In this work, a new and unconventional source of interface interaction based on metal–metal bonds is presented. With this aim, an Au^I organometallic gelator was exploited for the formation of hydrogel‐like nanocomposites containing inorganic nanoparticles and conjugated organic molecules. Noteworthy, the establishment of metallophilic interactions at the interface between the two moieties greatly enhances interparticle coupling in the composites. Thus, we believe that this new hybrid system might represent a promising alternative in several fields, such as in the fabrication of improved light‐harvesting devices.     

Studies on Hybrid Organic/Inorganic Nanocomposite Gels Using Photoluminescence Techniques

Summary.  Transparent nanocomposite gels made of hybrid organic/inorganic polymers, synthesized through the sol-gel method, composed of poly-(ethylene oxide) or poly-(propylene oxide) chains, and grafted on silica through urea bridges, have been studied by steady-state and time-resolved photoluminescence techniques. These nanocomposite materials consist of two distinguished subphases, an organic and an inorganic one. The volume fraction of the organic (polyether) subphase is larger than that of the inorganic (silica) subphase, and it increases with increasing polyether chain size. The condensation of the silica subphase provides luminescent entities emitting light by electron-hole recombination on delocalized states associated with the active chemical species of the urea bridges. Materials with smaller polyether chains are more luminescent than such with longer polyether chains. Divalent or trivalent cations introduced into these materials enhance the luminescence intensity by solubilization close to the silica cluster surface and thus by decreasing surface defects and the ensuing quenching mechanism. Received June 23, 2000. Accepted (revised) July 18, 2000     

Quantum-dot/aptamer-based ultrasensitive multi-analyte electrochemical biosensor

The coupling of aptamers with the coding and amplification features of inorganic nanocrystals is shown for the first time to offer a highly sensitive and selective simultaneous bioelectronic detection of several protein targets. This is accomplished in a single-step displacement assay in connection to a self-assembled monolayer of several thiolated aptamers conjugated to proteins carrying different inorganic nanocrystals. Electrochemical stripping detection of the nondisplaced nanocrystal tracers results in a remarkably low (attomole) detection limit, that is, significantly lower than those of existing aptamer biosensors. The new device offers great promise for measuring a large panel of disease markers present at ultralow levels during early stages of the disease progress.     

Manipulating the Ultralong Organic Phosphorescence of Small Molecular Crystals

Ultralong organic phosphorescence (UOP) of metal-free organic materials has received considerable attention recently owing to their long-lived emission lifetimes, and the fact that they present an attractive alternative to persistent luminescence in inorganic phosphors. Enormous research effort has been devoted on improving UOP performance in metal-free organic phosphors by promoting the intersystem crossing (ISC) process and suppressing the non-radiative decay of triplet state excitons. This minireview summarizes the recent advances in the rational approaches for manipulating the UOP properties of small molecular crystals, such as phosphorescence lifetime, efficiency, and emission colors. Finally, the present challenges and future development of this field are proposed. This review will provide a guideline to rationally design more advanced metal-free organic phosphorescence materials for potential applications.     

Preparation and Characterization of the Hybrids Containing Silica Nanoparticles by Sol-Gel Crosslinking Process

The organic/inorganic hybrid nanomaterials containing silica nanoparticles are synthesized by sol-gel crosslinking process. The tetraethoxysilane (TEOS) and γ-aminopropyltriethoxylsilane as coupling agents are used as a precursor. The 2,4,6-tri [(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent is used to form covalent bonds among the inorganic nanoparticles. The chemical and morphological structures of the organic/inorganic hybrid are characterized with FTIR spectra, ²⁹Si-NMR, x-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic force microscope (AFM). The results show that the organic/inorganic hybrid forms covalent bond between the inorganic nanoparticle and Tri-EBAC. The network organic/inorganic hybrid can form good film with even nanometer particles. The network organic/inorganic hybrids nanomaterial not only exhibits the thermal properties of inorganic compounds, but also exhibits the thermal properties of organic polymer.     

Forming biocompatible and nonaggregated nanocrystals in water using amphiphilic polymers

High-quality nanocrystals formed in organic solvents can be completely solubilized in water using amphiphilic copolymers containing poly(ethylene glycol) or PEG. These copolymers are generated using a maleic anhydride coupling scheme that permits the coupling of a wide variety of PEG polymers, both unfunctionalized and functionalized, to hydrophobic tails. Thermogravimetric analysis, size exclusion chromatography, cryogenic transmission electron microscopy, and infrared spectroscopy all indicate that the copolymers effectively coat the nanocrystals surfaces. The composite nanocrystal-polymer assemblies can be targeted to recognize cancer cells with Her2 receptor and are biocompatible if their surface coatings contain PEG. In the particular case of semiconductor nanocrystals (e.g., quantum dots), the materials in water have the same optical spectra as well as quantum yield as those formed initially in organic solutions.     

Cd基化合物纳米晶-有机聚合物杂化太阳能电池研究进展

有机-无机杂化太阳能电池因其结合了有机材料和无机材料各自的优势而引起了人们的广泛关注和研究. Cd基化合物纳米晶因其具有制备方法简单、尺寸及形貌可控、载流子迁移率高和稳定性好等优点而成为最早被研究的一类无机受体. 本文介绍了有机-无机杂化太阳能电池的结构及原理, 分析了影响有机-无机杂化太阳能电池效率的三个主要因素, 分别是开路电压(V_oc)、短路电流(J_sc)和填充因子(FF). 从改善Cd基化合物纳米晶的合成方法, 增加Cd基化合物纳米晶和有机聚合物间的界面接触, 以及优化Cd基化合物纳米晶和有机聚合物所用溶剂和所占比例等方面阐述了近年来Cd基化合物纳米晶-有机聚合物杂化太阳能电池的研究进展. 并展望了Cd基化合物纳米晶-有机聚合物杂化太阳能电池的发展方向.     

Solid state radioluminescent lighting

We have demonstrated novel types of tritium-powered, solid-phase radioluminescent (RL) light sources. These lights include: (1) all-organic formulations comprised of polystyrene and fluorescent organic dyes; (2) polydimethylsiloxane-based systems incorporating inorganic phosphors; and (3) inorganic aerogel-based systems doped with phosphors. Three principal design consideration for these new RL lights are described. These include: (1) incorporation of tritium into the solid matrix; (2) molecular engineering to maximize light-output efficiency; and (3) strategies for increasing longevity. The advanced RL lights, which are of interest due to potential advantages in efficiency, brightness and safety, are being developed for emergency lighting uses and for battery and lighting applications in remote locations.