Electrical Pulse-Driven Periodic Self-Repair of Cu-Ni Tandem Catalyst for Efficient Ammonia Synthesis from Nitrate

Electrocatalytic nitrate reduction sustainably produces ammonia and alleviates water pollution, yet is still challenging due to the kinetic mismatch and hydrogen evolution competition. Cu/Cu₂O heterojunction is proven effective to break the rate-determining NO₃⁻-to-NO₂⁻ step for efficient NH₃ conversion, while it is unstable due to electrochemical reconstruction. Here we report a programmable pulsed electrolysis strategy to achieve reliable Cu/Cu₂O structure, where Cu is oxidized to CuO during oxidation pulse, then regenerating Cu/Cu₂O upon reduction. Alloying with Ni further modulates hydrogen adsorption, which transfers from Ni/Ni(OH)₂ to N-containing intermediates on Cu/Cu₂O, promoting NH₃ formation with a high NO₃⁻-to-NH₃ Faraday efficiency (88.0±1.6 %, pH 12) and NH₃ yield rate (583.6±2.4 μmol cm⁻² h⁻¹) under optimal pulsed conditions. This work provides new insights to in situ electrochemically regulate catalysts for NO₃⁻-to-NH₃ conversion.     

Dopant-Induced Electronic States Regulation Boosting Electroreduction of Dilute Nitrate to Ammonium

Electrochemically converting NO₃⁻ into NH₃ offers a promising route for water treatment. Nevertheless, electroreduction of dilute NO₃⁻ is still suffering from low activity and/or selectivity. Herein, B as a modifier was introduced to tune electronic states of Cu and further regulate the performance of electrochemical NO₃⁻ reduction reaction (NO₃RR) with dilute NO₃⁻ concentration (≤100 ppm NO₃⁻−N). Notably, a linear relationship was established by plotting NH₃ yield vs. the oxidation state of Cu, indicating that the increase of Cu⁺ content leads to an enhanced NO₃⁻-to-NH₃ conversion activity. Under a low NO₃⁻−N concentration of 100 ppm, the optimal Cu(B) catalyst displays a 100 % NO₃⁻-to-NH₃ conversion at −0.55 to −0.6 V vs. RHE, and a record-high NH₃ yield of 309 mmol h⁻¹ g_cat⁻¹, which is more than 25 times compared with the pristine Cu nanoparticles (12 mmol h⁻¹ g_cat⁻¹). This research provides an effective method for conversion of dilute NO₃⁻ to NH₃, which has certain guiding significance for the efficient and green conversion of wastewater in the future.     

Boosting Electrocatalytic Nitrate-to-Ammonia via Tuning of N-Intermediate Adsorption on a Zn−Cu Catalyst

The renewable-energy-powered electroreduction of nitrate (NO₃⁻) to ammonia (NH₃) has garnered significant interest as an eco-friendly and promising substitute for the Haber–Bosch process. However, the sluggish kinetics hinders its application at a large scale. Herein, we first calculated the N-containing species (*NO₃ and *NO₂) binding energy and the free energy of the hydrogen evolution reaction over Cu with different metal dopants, and it was shown that Zn was a promising candidate. Based on the theoretical study, we designed and synthesized Zn-doped Cu nanosheets, and the as-prepared catalysts demonstrated excellent performance in NO₃⁻-to-NH₃. The maximum Faradaic efficiency (FE) of NH₃ could reach 98.4 % with an outstanding yield rate of 5.8 mol g⁻¹ h⁻¹, which is among the best results up to date. The catalyst also had excellent cycling stability. Meanwhile, it also presented a FE exceeding 90 % across a wide potential range and NO₃⁻ concentration range. Detailed experimental and theoretical studies revealed that the Zn doping could modulate intermediates adsorption strength, enhance NO₂⁻ conversion, change the *NO adsorption configuration to a bridge adsorption, and decrease the energy barrier, leading to the excellent catalytic performance for NO₃⁻-to-NH₃.     

Tandem Electrocatalytic Nitrate Reduction to Ammonia on MBenes

We demonstrate the great feasibility of MBenes as a new class of tandem catalysts for electrocatalytic nitrate reduction to ammonia (NO₃RR). As a proof of concept, FeB₂ is first employed as a model MBene catalyst for the NO₃RR, showing a maximum NH₃-Faradaic efficiency of 96.8 % with a corresponding NH₃ yield of 25.5 mg h⁻¹ cm⁻² at −0.6 V vs. RHE. Mechanistic studies reveal that the exceptional NO₃RR activity of FeB₂ arises from the tandem catalysis mechanism, that is, B sites activate NO₃⁻ to form intermediates, while Fe sites dissociate H₂O and increase *H supply on B sites to promote the intermediate hydrogenation and enhance the NO₃⁻-to-NH₃ conversion.     

Enclosing the nitrogen cycle: Ammonia synthesis by NOx reduction

Nitrogen cycling (N₂-NO_x-NH₃) is essential for maintaining life as it is crucial in fertilizers and nucleic acids. However, the current NH₃ synthesis (N₂-to-NH₃) for fertilizers and energy requires large amounts of fossil fuels and greenhouse gas emissions, compromising its eco-economic significance. Meanwhile, approaches like selective catalytic reaction are applied to neutralize the toxic NO_x into N₂ but call for value-added NH₃ as the reduction agent. In this regard, directly converting harmful NO_x, one of the major environmental pollutants, into NH₃ is a promising way to balance the nitrogen cycle eco-friendly, which is still in its infancy. Recently, the electrocatalytic NO_x reduction reaction (NO_xRR) unveiled a potential route for the NO_x-to-NH₃ conversion. This review presents the latest progress in the electrocatalytic NO_xRR in reaction mechanism and catalysts design. It will provide a comprehensive understanding to guide future research in NO_xRR, aiming to offer sustainable chemistry and energy feedstocks for the carbon-zero economy.     

Modulating Metal-Nitrogen Coupling in Anti-Perovskite Nitride via Cation Doping for Efficient Reduction of Nitrate to Ammonia

The complexes of metal center and nitrogen ligands are the most representative systems for catalyzing hydrogenation reactions in small molecule conversion. Developing heterogeneous catalysts with similar active metal-nitrogen functional centers, nevertheless, still remains challenging. In this work, we demonstrate that the metal-nitrogen coupling in anti-perovskite Co₄N can be effective modulated by Cu doping to form Co₃CuN, leading to strongly promoted hydrogenation process during electrochemical reduction of nitrate (NO₃⁻RR) to ammonia. The combination of advanced spectroscopic techniques and density functional theory calculations reveal that Cu dopants strengthen the Co−N bond and upshifted the metal d-band towards the Fermi level, promoting the adsorption of NO₃⁻ and *H and facilitating the transition from *NO₂/*NO to *NO₂H/*NOH. Consequently, the Co₃CuN delivers noticeably better NO₃⁻RR activity than the pristine Co₄N, with optimal Faradaic efficiency of 97 % and ammonia yield of 455.3 mmol h⁻¹ cm⁻² at −0.3 V vs. RHE. This work provides an effective strategy for developing high-performance heterogeneous catalyst for electrochemical synthesis.     

Enhanced Electrochemical Nitrate-to-Ammonia Performance of Cobalt Oxide by Protic Ionic Liquid Modification

Electrochemical conversion of nitrate to ammonia is an appealing way for small-scale and decentralized ammonia synthesis and waste nitrate treatment. Currently, strategies to enhance the reaction performance through elaborate catalyst design have been well developed, but it is still of challenge to realize the promotion of reactivity and selectivity at the same time. Instead, a facile method of catalyst modification with ionic liquid to modulate the electrode surface microenvironment that mimic the role of the natural MoFe protein environment is found effective for the simultaneous improvement of NH₃ yield rate and Faradaic efficiency (FE) at a low NaNO₃ concentration of 500 ppm. Protic ionic liquid (PIL) N-butylimidazolium bis(trifluoromethylsulfonyl)imide ([Bim]NTf₂) modified Co₃O_4−x is fabricated and affords the NH₃ yield rate and FE of 30.23±4.97 mg h⁻¹ mg_cat.⁻¹ and 84.74±3.43 % at −1.71 and −1.41 V vs. Ag/AgCl, respectively, outperforming the pristine Co₃O_4−x. Mechanistic and theoretical studies reveal that the PIL modification facilitates the adsorption and activation of NO₃⁻ as well as the NO₃⁻-to-NH₃ conversion and inhibits hydrogen evolution reaction competition via enhancing the Lewis acidity of the Co center, shuttling protons, and constructing a hydrogen bonded and hydrophobic electrode surface microenvironment.     

Breaking Local Charge Symmetry of Iron Single Atoms for Efficient Electrocatalytic Nitrate Reduction to Ammonia

The electrochemical conversion of nitrate pollutants into value-added ammonia is a feasible way to achieve artificial nitrogen cycle. However, the development of electrocatalytic nitrate-to-ammonia reduction reaction (NO₃⁻RR) has been hampered by high overpotential and low Faradaic efficiency. Here we develop an iron single-atom catalyst coordinated with nitrogen and phosphorus on hollow carbon polyhedron (denoted as Fe−N/P−C) as a NO₃⁻RR electrocatalyst. Owing to the tuning effect of phosphorus atoms on breaking local charge symmetry of the single-Fe-atom catalyst, it facilitates the adsorption of nitrate ions and enrichment of some key reaction intermediates during the NO₃⁻RR process. The Fe−N/P−C catalyst exhibits 90.3 % ammonia Faradaic efficiency with a yield rate of 17980 μg h⁻¹ mg_cat⁻¹, greatly outperforming the reported Fe-based catalysts. Furthermore, operando SR-FTIR spectroscopy measurements reveal the reaction pathway based on key intermediates observed under different applied potentials and reaction durations. Density functional theory calculations demonstrate that the optimized free energy of NO₃⁻RR intermediates is ascribed to the asymmetric atomic interface configuration, which achieves the optimal electron density distribution. This work demonstrates the critical role of atomic-level precision modulation by heteroatom doping for the NO₃⁻RR, providing an effective strategy for improving the catalytic performance of single atom catalysts in different electrochemical reactions.     

Carbon-Anchored Molybdenum Oxide Nanoclusters as Efficient Catalysts for the Electrosynthesis of Ammonia and Urea

The electrochemical NO₃⁻ reduction and its coupling with CO₂ can provide novel and clean routes to synthesize NH₃ and urea, respectively. However, their practical application is still impeded by the lack of efficient catalysts with desirable Faradaic efficiency (FE) and yield rate. Herein, we report the synthesis of molybdenum oxide nanoclusters anchored on carbon black (MoO_x/C) as electrocatalyst. It affords an outstanding FE of 98.14 % and NH₃ yield rate of 91.63 mg h⁻¹ mg_cat.⁻¹ in NO₃⁻ reduction. Besides, the highest FE of 27.7 % with a maximum urea yield rate of 1431.5 μg h⁻¹ mg_cat.⁻¹ toward urea is also achieved. The formation of electron-rich MoO_x nanoclusters with highly unsaturated metal sites in the MoO_x/C heterostructure is beneficial for enhanced catalytic performance. Studies on the mechanism reveal that the stabilization of *NO and *CO₂NOOH intermediates are critical for the NH₃ and urea synthesis, respectively.     

Reactivity of NO with NH3 in the Presence of O2 over Ce-ZSM5 with and without Moisture

Cerium based ZSM5 catalysts are used to study NO reduction with NH₃ in the presence of oxygen with and without moisture. The Ce-ZSM5 was prepared by wet impregnation method and characterized by X-ray diffraction technique, BET surface and SEM. Ce-ZSM5 showed better NO_x reduction than H-ZSM5 which is a poor catalyst for NO_x reduction with NH₃. The metal incorporation in H-ZSM5 has increased the catalytic activity. The catalytic activity showed significant difference in NO_x conversion with and without moisture. The disperse Ce species are the active centers for the reduction of NO with NH₃ in the presence of oxygen. This revised version was published online in June 2006 with corrections to the Cover Date.     

Defect Engineering Metal‐Free Polymeric Carbon Nitride Electrocatalyst for Effective Nitrogen Fixation under Ambient Conditions

Electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions provides an intriguing picture for the conversion of N₂ into NH₃. However, electrocatalytic NRR mainly relies on metal‐based catalysts, and it remains a grand challenge in enabling effective N₂ activation on metal‐free catalysts. Here we report a defect engineering strategy to realize effective NRR performance (NH₃ yield: 8.09 μg h^?1 mg^?1_cat., Faradaic efficiency: 11.59 %) on metal‐free polymeric carbon nitride (PCN) catalyst. Illustrated by density functional theory calculations, dinitrogen molecule can be chemisorbed on as‐engineered nitrogen vacancies of PCN through constructing a dinuclear end‐on bound structure for spatial electron transfer. Furthermore, the N?N bond length of adsorbed N₂ increases dramatically, which corresponds to “strong activation” system to reduce N₂ into NH₃. This work also highlights the significance of defect engineering for improving electrocatalysts with weak N₂ adsorption and activation ability.     

Enhancing Electrochemical Nitrate Reduction to Ammonia over Cu Nanosheets via Facet Tandem Catalysis

Electrochemical conversion of nitrate (NO₃⁻) into ammonia (NH₃) represents a potential way for achieving carbon-free NH₃ production while balancing the nitrogen cycle. Herein we report a high-performance Cu nanosheets catalyst which delivers a NH₃ partial current density of 665 mA cm⁻² and NH₃ yield rate of 1.41 mmol h⁻¹ cm⁻² in a flow cell at −0.59 V vs. reversible hydrogen electrode. The catalyst showed a high stability for 700 h with NH₃ Faradaic efficiency of ≈88 % at 365 mA cm⁻². In situ spectroscopy results verify that Cu nanosheets are in situ derived from the as-prepared CuO nanosheets under electrochemical NO₃⁻ reduction reaction conditions. Electrochemical measurements and density functional theory calculations indicate that the high performance is attributed to the tandem interaction of Cu(100) and Cu(111) facets. The NO₂⁻ generated on the Cu(100) facets is subsequently hydrogenated on the Cu(111) facets, thus the tandem catalysis promotes the crucial hydrogenation of *NO to *NOH for NH₃ production.     

A Biomass-Derived Carbon-Based Electrocatalyst for Efficient N2 Fixation to NH3 under Ambient Conditions

Currently, NH₃ production primarily depends on the Haber–Bosch process, which operates at elevated temperatures and pressures and leads to serious CO₂ emissions. Electrocatalytic N₂ reduction offers an environmentally benign approach for the sustainable synthesis of NH₃ under ambient conditions. This work reports the development of biomass-derived amorphous oxygen-doped carbon nanosheet (O−CN) using tannin as the precursor. As a metal-free electrocatalyst for N₂-to-NH₃ conversion, such O−CN shows high catalytic performances, achieving a large NH₃ yield of 20.15 μg h⁻¹ mg⁻¹_cat. and a high Faradic efficiency of 4.97 % at −0.6 V vs. reversible hydrogen electrode (RHE) in 0.1 m HCl at ambient conditions. Remarkably, it also exhibits high electrochemical selectivity and durability.     

Electrochemical nitrate reduction to produce ammonia integrated into wastewater treatment: Investigations and challenges

Nitrate (NO₃⁻) is widely found in wastewater, which is harmful to human health and water environmental. Electrochemical reduction can convert NO₃⁻ to high value-added ammonia (NH₃)/ammonium (NH₄⁺) for pollutant removal and resource recovery. Currently, electrochemical nitrate reduction to produce ammonia (ENRA) is mostly focused on the preparation of high-performance catalysts, while ignoring the prerequisite for industrial application as the stable operation and optimal regulation of the process. Therefore, the review focused on wastewater treatment, based on the mechanism of electrochemical nitrate reduction for ammonia production and reactor construction (reactor, power supply system), then summarized the operation control strategies (such as reduction potential, nitrate concentration, inorganic ions, pH) that should be noted for ENRA. Finally, the challenges (system structure, economy) and prospects (ammonia recovery process, construction of large-scale ENRA system, application of real wastewater) of the field as it moves towards commercialization were discussed. It is hoped that this review will facilitate the scaling up of ENRA in the wastewater treatment field.     

Sb modified Fe–Mn/TiO<Subscript>2</Subscript> catalyst for the reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> with NH<Subscript>3</Subscript> at low temperatures

Manganese-based catalysts have attracted much attention due to their excellent performance for NO reduction with NH₃ (NH₃-SCR) at low temperatures. In the current study, the novel metal Sb was modified into Mn/TiO₂ and Fe–Mn/TiO₂, and the NO _x conversion was compared with those of Mn/TiO₂ and Fe–Mn/TiO₂ catalysts to investigate the effect of the Sb. The NO _x reduction activities of the catalysts were evaluated in the temperature range of 100–250 °C at a space velocity of 60,000 h^?1. The physicochemical properties of all the catalysts were characterized by Brunauer–Emmett–Teller surface area, temperature-programmed desorption of ammonia, temperature-programmed reduction, X-ray photoelectron spectroscopy, X-ray diffraction, and high-resolution transmission electron microscopy. Interestingly, the Sb-promoted Mn-based catalysts showed significantly higher NO _x conversion than the other catalysts with or without 6 vol% of H₂O. The high performance of the Sb-modified catalysts could be related to the increase of acid sites and redox properties.     

Supramolecular Enhancement of Electrochemical Nitrate Reduction Catalyzed by Cobalt Porphyrin Organic Cages for Ammonia Electrosynthesis in Water**

The electrochemical nitrate (NO₃⁻) reduction reaction (NO₃RR) to ammonia (NH₃) represents a sustainable approach for denitrification to balance global nitrogen cycles and an alternative to traditional thermal Haber-Bosch processes. Here, we present a supramolecular strategy for promoting NH₃ production in water from NO₃RR by integrating two-dimensional (2D) molecular cobalt porphyrin ( CoTPP ) units into a three-dimensional (3D) porous organic cage architecture. The porphyrin box CoPB-C8 enhances electrochemical active site exposure, facilitates substrate–catalyst interactions, and improves catalyst stability, leading to turnover numbers and frequencies for NH₃ production exceeding 200,000 and 56 s⁻¹, respectively. These values represent a 15-fold increase in NO₃RR activity and 200-mV improvement in overpotential for the 3D CoPB-C8 box structure compared to its 2D CoTPP counterpart. Synthetic tuning of peripheral alkyl substituents highlights the importance of supramolecular porosity and cavity size on electrochemical NO₃RR activity. These findings establish the incorporation of 2D molecular units into 3D confined space microenvironments as an effective supramolecular design strategy for enhancing electrocatalysis.     

SCR performance enhancement of NiMnTi mixed oxides catalysts by regulating assembling methods of LDHs-Based precursor

A series of NiMnTi mixed metal oxides (Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO, NiMnTi-LDO) were synthesized via different assembling methods and evaluated in the selective catalytic reduction of NO_x with NH₃(NH₃-SCR). As the results presented, catalysts via diverse assembling methods of LDHs templates afforded different catalytic denitrification (DeNO_x) performance, which might be related to the exposure degree of active constituents and the interaction intensity between metal components. Noticeably, compared with Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO catalysts, the NiMnTi-LDO catalyst deriving from one step in-situ method NiMnTi-LDH precursor template exhibited the most desirable performance at temperature window of 150–360 °C in NH₃-SCR (above 90% NO_x conversion with 95% N₂ selectivity). The specific structure and property of samples were correlated by means of a series of characterizations, where the results indicated that NiMnTi-LDO possessed the highest surface area, the strongest redox ability, the most abundant acid amount and the best dispersion.     

Highly Graphitized Porous Carbon-FeNi3 Fabricated from Oleic Acid for Advanced Lithium–Sulfur Batteries

Improving the electrical conductivity of sulfur, suppressing shuttle/dissolution of polysulfide, and enhancing reaction kinetics in Li–S batteries are essential for practical applications. Here, for the first time, we have used inexpensive oleic acid as a single carbon source, and have added commercial SiO₂ as a template to form a porous structure, whereas introducing Fe(NO₃)₃ and Ni(NO₃)₂ as catalysts to increase the degree of graphitization. Moreover, the dual metal salts Fe(NO₃)₃ and Ni(NO₃)₂ can also form FeNi₃ alloy, and our results show that FeNi₃ nanoparticles accelerate the kinetic conversion reactions of polysulfide. By virtue of the well-developed porous structure and high degree of graphitization, the highly graphitized porous carbon-FeNi₃ (GPC-FeNi₃) has high conductivity to ensure fast charge transfer, and the hierarchically porous structure facilitates ion diffusion and traps polysulfide. Thus, a GPC-FeNi₃/S cathode displays excellent electrochemical performance. At current rates of 0.2 and 1 C, a cathode of the GPC-FeNi₃/S composite with a sulfur content of 70 % delivers high initial discharge capacities of 1108 and 880 mA h g⁻¹, respectively, and retains reversible specific capacities of 850 mA h g⁻¹ after 200 cycles at 0.2 C and 625 mA h g⁻¹ after 400 cycles at 1 C.     

Progress on Noble Metal-Based Catalysts Dedicated to the Selective Catalytic Ammonia Oxidation into Nitrogen and Water Vapor (NH3-SCO)

A recent development for selective ammonia oxidation into nitrogen and water vapor (NH₃-SCO) over noble metal-based catalysts is covered in the mini-review. As ammonia (NH₃) can harm human health and the environment, it led to stringent regulations by environmental agencies around the world. With the enforcement of the Euro VI emission standards, in which a limitation for NH₃ emissions is proposed, NH₃ emissions are becoming more and more of a concern. Noble metal-based catalysts (i.e., in the metallic form, noble metals supported on metal oxides or ion-exchanged zeolites, etc.) were rapidly found to possess high catalytic activity for NH₃ oxidation at low temperatures. Thus, a comprehensive discussion of property-activity correlations of the noble-based catalysts, including Pt-, Pd-, Ag- and Au-, Ru-based catalysts is given. Furthermore, due to the relatively narrow operating temperature window of full NH₃ conversion, high selectivity to N₂O and NO_x as well as high costs of noble metal-based catalysts, recent developments are aimed at combining the advantages of noble metals and transition metals. Thus, also a brief overview is provided about the design of the bifunctional catalysts (i.e., as dual-layer catalysts, mixed form (mechanical mixture), hybrid catalysts having dual-layer and mixed catalysts, core-shell structure, etc.). Finally, the general conclusions together with a discussion of promising research directions are provided.     

Effect of inorganic anions on the titanium dioxide-based photocatalytic oxidation of aqueous ammonia and nitrite

In this study, we investigated the effects of four inorganic anions (Cl⁻, SO₄²⁻, H₂PO₄⁻/HPO₄²⁻, and HCO₃⁻/CO₃²⁻) on titanium dioxide (TiO₂)-based photocatalytic oxidation of aqueous ammonia (NH₄⁺/NH₃) at pH ∼ 9 and ∼10 and nitrite (NO₂⁻) over the pH range of 4–11. The initial rates of NH₄⁺/NH₃ and NO₂⁻ photocatalytic oxidation are dependent on both the pH and the anion species. Our results indicate that, except for CO₃²⁻, which decreased the homogeneous oxidation rate of NH₄⁺/NH₃ by UV-illuminated hydrogen peroxide, OH scavenging by anions and/or direct oxidation of NH₄⁺/NH₃ and NO₂⁻ by anion radicals did not affect rates of TiO₂ photocatalytic oxidation. While HPO₄²⁻ enhanced NH₄⁺/NH₃ photocatalytic oxidation at pH ∼ 9 and ∼10, H₂PO₄⁻/HPO₄²⁻ inhibited NO₂⁻ oxidation at low to neutral pH values. The presence of Cl⁻, SO₄²⁻, and HCO₃⁻ had no effect on NH₄⁺/NH₃ and NO₂⁻ photocatalytic oxidation at pH ∼ 9 and ∼10, whereas CO₃²⁻ slowed NH₄⁺/NH₃ but not NO₂⁻ photocatalytic oxidation at pH ∼ 11. Photocatalytic oxidation of NH₄⁺/NH₃ to NO₂⁻ is the rate-limiting step in the complete oxidation of NH₄⁺/NH₃ to NO₃⁻ in the presence of common wastewater anions. Therefore, in photocatalytic oxidation treatment, we should choose conditions such as alkaline pH that will maximize the NH₄⁺/NH₃ oxidation rate.