An efficient and general method for the Heck and Buchwald-Hartwig coupling reactions of aryl chlorides

The β-diketiminatophosphane Pd complex acted as a powerful catalyst for the Heck coupling of aryl chlorides with alkenes. Various aryl and heteroaryl chlorides were coupled efficiently under relatively mild conditions. Furthermore, this catalytic system also proved to be highly active in the Buchwald-Hartwig coupling of deactivated and sterically hindered aryl chlorides at room temperature.     

A versatile catalyst for Heck reactions of aryl chlorides and aryl bromides under mild conditions.

In the presence of Cy2NMe, Pd/P(t-Bu)3 serves as an exceptionally mild and versatile catalyst for Heck reactions of aryl chlorides and bromides. A sterically and electronically diverse array of aryl bromides, as well as activated aryl chlorides, couple with a range of mono- and disubstituted olefins at room temperature, furnishing the arylated product with high E/Z stereoselection. The corresponding reactions of a broad spectrum of electron-neutral and electron-rich aryl chlorides proceed at elevated temperature, also with high selectivity. In terms of scope and mildness, Pd/P(t-Bu)3/Cy2NMe represents an advance over previously reported catalysts for these Heck coupling processes.     

[Pd(Cl)2{P(NC5H10)(C6H11)2}2]—A Highly Effective and Extremely Versatile Palladium‐Based Negishi Catalyst that Efficiently and Reliably Operates at Low Catalyst Loadings

[Pd(Cl)₂{P(NC₅H₁₀)(C₆H₁₁)₂}₂] ( 1 ) has been prepared in quantitative yield by reacting commercially available [Pd(cod)(Cl)₂] (cod=cyclooctadiene) with readily prepared 1‐(dicyclohexylphosphanyl)piperidine in toluene under N₂ within a few minutes at room temperature. Complex 1 has proved to be an excellent Negishi catalyst, capable of quantitatively coupling a wide variety of electronically activated, non‐activated, deactivated, sterically hindered, heterocyclic, and functionalized aryl bromides with various (also heterocyclic) arylzinc reagents, typically within a few minutes at 100 °C in the presence of just 0.01 mol % of catalyst. Aryl bromides containing nitro, nitrile, ether, ester, hydroxy, carbonyl, and carboxyl groups, as well as acetals, lactones, amides, anilines, alkenes, carboxylic acids, acetic acids, and pyridines and pyrimidines, have been successfully used as coupling partners. Furthermore, electronic and steric variations are tolerated in both reaction partners. Experimental observations strongly indicate that a molecular mechanism is operative.     

Negishi cross-coupling reaction catalyzed by an aliphatic, phosphine based pincer complex of palladium. biaryl formation via cationic pincer-type Pd(IV) intermediates

The aliphatic, phosphine-based pincer complex [(C(10)H(13)-1,3-(CH(2)P(Cy(2))(2))Pd(Cl)] (1) is a highly active Negishi catalyst, enable to quantitatively couple various electronically activated, non-activated, deactivated, sterically hindered and functionalized aryl bromides with various diarylzinc reagents within short reaction times and low catalyst loadings. Experimental observations strongly indicate that a molecular mechanism is operative with initial chloride dissociation of 1 and formation of the cationic T-shaped 14e(-) complex [(C(10)H(13)-1,3-(CH(2)P(C(6)H(11))(2))(2))Pd](+) (B), which undergoes oxidative addition of an aryl bromide (Ar'Br) to yield the cationic, penta-coordinated aryl bromide pincer complexes of type [(C(10)H(13)-1,3-(CH(2)P(Cy(2))(2))Pd(Br)(aryl')](+) (C) with the metal center in the oxidation state of +IV and the aryl unit in cis position relative to the aliphatic pincer core. Subsequent transmetalation with Zn(aryl)(2) result in the cationic diaryl pincer complexes of type [(C(10)H(13)-1,3-(CH(2)P(Cy(2))(2))Pd(aryl)(aryl')](+) (D), which reductively eliminate the coupling products, thereby regenerating the catalyst. The neutral square planar aryl pincer complex--a possible key intermediate in the catalytic cycle--was found to be reversibly formed in the reaction mixture but is not involved in the catalytic mechanism. Similarly, palladium nanoparticles as the catalytically active form of 1 could have been excluded.     

Palladium-catalyzed cross-coupling of B-benzyl-9-borabicyclo[3.3.1]nonane to furnish methylene-linked biaryls

[reaction: see text] Benzylboranes are noticeably uncommon partners within Suzuki-Miyaura coupling reactions. B-Benzyl-9-BBN was successfully coupled to a range of aryl/heteroaryl bromides, chlorides, and triflates to give pharmacologically important methylene-linked biaryl structures. Activated, deactivated, and sterically hindered substrates were successfully coupled in high yield using Pd(PPh(3))(4) or Pd(OAc)(2) with SPhos as the catalyst system.     

An extremely active and general catalyst for Suzuki coupling reaction of unreactive aryl chlorides

β-Diketiminatophosphane Pd complex 2a acted as a powerful catalyst which allows easy access to the Suzuki coupling reaction of less reactive aryl chlorides under mild conditions. A wide range of sterically hindered and deactivated aryl chlorides could be efficiently coupled at a low catalyst loading of 0.1 mol %. Furthermore, this catalytic system also proved to be highly effective in one-pot multiple couplings.     

A novel approach to functionalized (E)-1,4-diaryl-1-butenes by Heck reaction and their applications for the construction of dibenzylbutyrolactone lignan skeletons by radical cyclization

A highly regio- and stereoselective [Pd(allyl)Cl]₂ catalyzed Heck reaction of aryl iodides and electronically neutral terminal olefins generated in situ by fluoride induced protiodesilylation of alkenylsilanol derivatives under mild conditions has been developed. The products, viz. terminally substituted styrenes and (E)-1,4-diaryl-1-butenes were obtained in very good yields. The dibenzylbutyrolactone lignan skeletons have been prepared employing two regio- and stereoselective Bu₃SnH-mediated radical cyclization routes.     

Scope and limitations of Pd2(dba)3/P(i-BuNCH2CH2)3N-catalyzed Buchwald-Hartwig amination reactions of aryl chlorides

Proazaphosphatrane ligands in combination with Pd(2)(dba)(3) generate highly active catalysts for Buchwald-Hartwig amination of aryl chlorides. In particular, commercially available P(i-BuNCH(2)CH(2))(3)N is a highly general and efficient ligand, allowing the coupling of an electronically diverse set of aryl chlorides, including chloropyridines, with a wide variety of amines using 1 mol % of Pd at 100 degrees C. Either a 1:1 or 2:1 ratio of ligand to Pd was found to be effective. This catalyst system performs exceptionally well for sterically hindered substrates, even with only 0.25 mol % of Pd. It is shown that NaOH can also be used as the base (instead of NaO-t-Bu) allowing functionalized substrates to participate in these reactions.     

Sterically bulky thioureas as air- and moisture-stable ligands for pd-catalyzed Heck reactions of aryl halides

We demonstrate that sterically bulky N,N'-disubstituted cyclic thiourea-Pd(0) complexes are air- and moisture-stable and highly active catalysts for palladium-catalyzed Heck reaction of aryl iodides and bromides with olefins (TONs up to 500000 for the reaction of PhI and methyl acrylate). Even activated aryl chlorides can undergo complete conversion in Bu(4)NBr in the presence of 1 mol % Pd catalyst.     

Iminophosphine-palladium(0) complexes as highly active catalysts in the Suzuki reaction. Synthesis of undecaaryl substituted corroles

The iminophosphine-palladium(0) complex [Pd(dmfu)(P-N)] [dmfu=dimethyl fumarate; P-N=2-(PPh₂)C₆H₄-1-CHNC₆H₄-4-OMe] is a very efficient catalyst for the Suzuki coupling. In the reaction of aryl bromides with phenylboronic acid, turnover numbers up to ca. 200,000 are obtained at 110 °C in 2 h. Good rates are obtained also with the sterically hindered and electronically deactivated 2-bromo-1,3,5-trimethylbenzene. The complex is able to catalyze the exhaustive arylation of 2,3,7,8,12,13,17,18-octabromo-5,10,15-triphenylcorroleCu(III) to yield the corresponding undecaaryl substituted derivative.     

A mechanistic study on modern palladium catalyst precursors as new gateways to Pd(0) in cationic Heck reactions

Electrospray ionization mass spectrometry (ESI-MS) was used as a means to directly identify catalytic cationic organopalladium species in ligand-controlled Heck reactions involving electron-rich olefins and different Pd-sources. In these high-temperature Heck arylations, the oxidative addition intermediates were observed as bidentate ligand chelated cationic aryl palladium species, suggesting that the used ligand attaches to the metal center at the very beginning of the catalytic cycle. This was also in agreement with the obtained regioisomeric profile of the isolated products. The investigation supports the standard Pd(0)/Pd(II) Heck mechanism and provides further insight regarding the conceivable composition of fundamental Pd(II) intermediates in an ongoing Heck reaction.     

Copper‐Catalyzed Coupling of Triaryl‐ and Trialkylindium Reagents with Aryl Iodides and Bromides through Consecutive Transmetalations

An efficient copper(I)‐catalyzed coupling of triaryl and trialkylindium reagents with aryl iodides and bromides is reported. The reaction proceeds at low catalyst loadings (2 mol %) and generally only requires 0.33 equivalents of the triorganoindium reagent with respect to the aryl halide as all three organic nucleophilic moieties of the reagent are transferred to the products through consecutive transmetalations. The reaction tolerates a variety of functional groups and sterically hindered substrates. Furthermore, preliminary mechanistic studies that entailed the synthesis and characterization of potential reaction intermediates offered a glimpse of the elementary steps that constitute the catalytic cycle.     

Efficient imidazolium salts for palladium-catalyzed Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions

The system, Pd(OAc)2/imidazolium salts (L2), was found as an efficient catalyst in the Heck coupling reaction of olefins with aryl halides and Suzuki reactions of various aryl halides with aryl boronic acids under aerobic condition. This catalytic system demonstrates great tolerance to a wide range of groups on all substrates of aryl halides, alkenes and aryl boronic acids.     

Palladium nanoparticles as efficient green homogeneous and heterogeneous carbon-carbon coupling precatalysts: a unifying view

Pd catalysis of C-C bond formations is briefly reviewed from the angle of nanoparticles (NPs) whether they are homogeneous or heterogeneous precatalysts and whether they are intentionally preformed or generated from a Pd derivative such as Pd(OAc)2. The most studied reaction is the Heck coupling of halogenoarenes with olefins that usually proceeds at high temperature (120-160 degrees C). Under such conditions, the PdII precursor is reduced to Pd0, forming PdNPs from which Pd atom leaching, subsequent to oxidative addition of the aryl halide onto the PdNP surface, is the source of very active molecular catalysts. Other C-C coupling reactions (Suzuki, Sonogashira, Stille, Negishi, Hiyama, Corriu-Kumada, Ullmann, and Tsuji-Trost) can also be catalyzed by species produced from preformed PdNPs. For catalysis of these reactions, leaching of active Pd atoms from the PdNPs may also provide a viable molecular mechanistic scheme. Thus, the term "PdNP catalysis of C-C coupling" used in this review refers to this function of PdNPs as precursors of catalytically active Pd species (i.e., the PdNPs are precatalysts of C-C coupling reactions).     

Heck reaction catalyzed by PD-modified zeolites.

[Pd]-exchanged NaY zeolites have been prepared, characterized, and applied for the first time for catalytic carbon-carbon coupling reactions. The catalysts exhibit a high activity and selectivity toward the Heck reaction of aryl bromides with olefins for small palladium concentrations (< or =0.1 mol % of Pd). The catalysts can easily be separated from the reaction mixture and reused after washing without loss in activity. No limitation to the diffusion of adducts in the zeolite cages was observed (for linear alkenes). The electronic nature of the aryl bromides and the olefins has a dominating effect on the reaction yield and selectivity. The heterogeneous catalysts quantitatively convert all types of all aryl bromide (complete conversion of bromobenzene within 30 min) and activated aryl chlorides under standard reaction conditions. Product form selectivity is observed in the Heck reaction with cyclic olefins.     

Catalytic and antibacterial properties of 3-dentate carboxamide Pd/Pt complexes obtained via a benign route

The complexes Pd^II(qcq)(OAc) and Pt^II(qcq)Cl have been synthesized using environmentally benign synthesized ligands and characterized by elemental analyses: Fourier transform infrared spectroscopy, UV–visible spectroscopy, ¹H NMR spectroscopy, and X-ray diffraction. The catalytic activity of the complex was assessed, in different media, for the Mizoroki–Heck coupling reaction for typical aryl halides and terminal olefins under aerobic conditions. Since the base and the solvent were found to influence the efficiency of the reaction, reaction conditions, temperature, time, and the amount of K₃PO₄ and a mixture of H₂O/PEG, were optimized. We found, for the Mizoroki–Heck reaction coupling less reactive aryl chloride derivatives with olefins, promising activity for palladium catalysts. The electrochemical behavior of Hqcq and the Pd(II) complex was investigated by cyclic voltammetry and irreversible Pd^II/I reductions were observed. Hqcq and the Pd(II) and Pt(II) complexes were also screened for their in vitro antibacterial activity. They showed promising antibacterial activity comparable to that of the antibiotic penicillin.     

Diversity-oriented synthesis of multisubstituted olefins through the sequential integration of palladium-catalyzed cross-coupling reactions. 2-pyridyldimethyl(vinyl)silane as a versatile platform for olefin synthesis.

A novel strategy for the diversity-oriented synthesis of multisubstituted olefins, where 2-pyridyldimethyl(vinyl)silane functions as a versatile platform for olefin synthesis, is described. The palladium-catalyzed Heck-type coupling of 2-pyridyldimethyl(vinyl)silanes with organic iodides took place in the presence of Pd2(dba)3/tri-2-furylphosphine catalyst to give beta-substituted vinylsilanes in excellent yields. The Heck-type coupling occurred even with alpha- and beta-substituted 2-pyridyldimethyl(vinyl)silanes. The one-pot double Heck coupling of 2-pyridyldimethyl(vinyl)silane took place with two different aryl iodides to afford beta,beta-diarylated vinylsilanes in good yields. The palladium-catalyzed Hiyama-type coupling of 2-pyridyldimethyl(vinyl)silane with organic halides took place in the presence of tetrabutylammonium fluoride to give di- and trisubstituted olefins in high yields. The sequential integration of Heck-type (or double Heck) coupling and Hiyama-type coupling produced the multisubstituted olefins in regioselective, stereoselective, and diversity-oriented fashions. Especially, the one-pot sequential Heck/Hiyama coupling reaction provides an extremely facile entry into a diverse range of stereodefined multisubstituted olefins. Mechanistic considerations of both Heck-type and Hiyama-type coupling reactions are also described.     

(IPr)Pd(acac)Cl: an easily synthesized, efficient, and versatile precatalyst for C-N and C-C bond formation

A very straightforward synthesis of (IPr)Pd(acac)Cl from two commercially available starting materials, Pd(acac)2 and IPr.HCl [acac = acetylacetonate; IPr = N,N'-bis(2,6-diisopropylphenyl)imidazol-2-ylidene], has been developed. The resulting complex, (IPr)Pd(acac)Cl (1), has proven to be a highly active PdII precatalyst in the Buchwald-Hartwig and the alpha-ketone arylation reactions. A wide range of substrates has been screened, including unactivated, sterically hindered, and heterocyclic aryl chlorides.     

Pd‐PEPPSI‐IPent‐SiO2: A Supported Catalyst for Challenging Negishi Coupling Reactions in Flow

A silica‐supported precatalyst, Pd‐PEPPSI‐IPent‐SiO₂, has been prepared and evaluated for its proficiency in the Negishi cross‐coupling of hindered and electronically deactivated coupling partners. The precatalyst Pd‐PEPPSI‐IPent loaded onto packed bed columns shows high catalytic activity for the room‐temperature coupling of deactivated/hindered biaryl partners. Also for the first time, the flowed Csp³–Csp² coupling of secondary alkylzinc reagents to (hetero)aromatics has been achieved with high selectivity with Pd‐PEPPSI‐IPent‐SiO₂. These couplings required residence times as short as 3 minutes to effect completion of these challenging transformations with excellent selectivity for the nonrearranged product.     

Highly active palladium catalysts supported by bulky proazaphosphatrane ligands for Stille cross-coupling: coupling of aryl and vinyl chlorides, room temperature coupling of aryl bromides, coupling of aryl triflates, and synthesis of sterically hindered biaryls

A family of proazaphosphatrane ligands [P(RNCH2CH2)2N(R'NCH2CH2): R = R' = i-Bu, 1; R = Bz, R' = i-Bu, 3; R = R' = Bz, 4] for palladium-catalyzed Stille reactions of aryl chlorides is described. Catalysts derived from ligands 1 and 4 efficiently catalyze the coupling of electronically diverse aryl chlorides with an array of organotin reagents. The catalyst system based on the ligand 3 is active for the synthesis of sterically hindered biaryls (di-, tri-, and tetra-ortho substituted). The use of ligand 4 allows room-temperature coupling of aryl bromides and it also permits aryl triflates and vinyl chlorides to participate in Stille coupling.