DSC kinetics of the thermal decomposition of copper(II) oxalate by isoconversional and maximum rate (peak) methods

The copper(II) oxalate was synthesized, characterized using FT-IR and scanning electron microscopy and its non-isothermal decomposition was studied by differential scanning calorimetric at different heating rates. The kinetics of the thermal decomposition was investigated using different isoconversional and maximum rate (peak) methods viz. Kissinger–Akahira–Sunose (KAS), Tang, Starink^1.95, Starink^1.92, Flynn–Wall–Ozawa (FWO) and Bosewell. The activation energy values obtained from isoconversional methods of FWO and Bosewell are 0.9 and 3.0 %, respectively, higher than that obtained from other methods. The variation of activation energy, E _α with conversion function, α, established using these different methods were found to be similar. Compared to the FWO method, the KAS method offers a significant improvement in the accuracy of the E _a values. All but the Bosewell maximum rate (peak) methods yielded consistent values of E _α (~137 kJ mol^?1); however, the complexity of the thermal decomposition reaction can be identified only through isoconversional methods.     

Kinetic analysis for non-isothermal decomposition of un-irradiated and gamma-irradiated potassium bromate

The thermal decomposition of un-irradiated and gamma-irradiated potassium bromate (KBrO₃) was performed under non-isothermal conditions at different heating rates (5, 10, 15 and 20 K min^?1). The data was analysed using isoconversional and non-isoconversional methods. The kinetic parameters of thermal decomposition process were obtained by three model-free isoconversional methods: Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose and Friedman. Irradiation enhances the decomposition and the effect increases with the irradiation dose. The activation energy decreases on irradiation. Kinetic analysis of data in view of various solid-state reaction models showed that the decomposition of un-irradiated and irradiated anhydrous KBrO₃ is best described by the Avrami–Erofeev model equation, [?ln(l?α)]^1/2 = kt.     

Thermogravimetric analysis of lignocellulosic and microalgae biomasses and their blends during combustion

Thermogravimetric analysis was used to study and compare the combustion of different blends of corn bioresidues with sunflower, rape and algae bioresidues. Non-isothermal thermogravimetric data were used to obtain the combustion kinetics of these bioresidues. This paper reports on the application of the Vyazovkin and Ozawa–Flynn–Wall isoconversional methods for the evaluation of kinetic parameters (energy activation, pre-exponential factor and order of reaction) for the combustion of the biomasses studied. Differences were found in the TG curves in accordance with the proximate analysis results for the cellulose, hemicellulose and lignin content of biomasses. The activation energy obtained from combustion (E ~ 151.6 kJ mol^?1) was lower than that from the blends (similar values were obtained for corn–sunflower, E ~ 160.5 kJ mol^?1 and corn–rape, E ~ 156.9 kJ mol^?1) whereas the activation energy obtained from the microalgae was higher (E ~ 171.5 kJ mol^?1). Both the Vyazovkin and Ozawa–Flynn–Wall methods yielded similar results.     

Determination of kinetic triplet of the synthesized Ni3(PO4)2·8H2O by non-isothermal and isothermal kinetic methods

The nickel phosphate octahydrate (Ni₃(PO₄)₂·8H₂O) was synthesized by a simple procedure and characterized by FTIR, TG/DTG/DTA, AAS, and XRD techniques. The morphologies of the title compound and its decomposition product were studied by the SEM method. The dehydration process of the synthesized hydrate occurred in one step over the temperature range of 120–250 °C, and the thermal decomposition product at 800 °C was found to be Ni₃(PO₄)₂. The kinetic parameters (E and A) of this step were calculated using the Ozawa–Flynn–Wall and Kissinger–Akahira–Sunose methods. The iterative methods of both equations were carried out to determine the exact values of E, which confirm the single-step mechanism of the dehydration process. The non-isothermal kinetic method was used to determine the mechanism function of the dehydration, which indicates the contracting disk mechanism of R₁ model as the most probable mechanism function and agrees well with the isothermal data. Besides, the isokinetic temperature value (T _i) was calculated from the spectroscopic data. The thermodynamic functions of the activated complex (ΔS ^≠, ΔH ^≠, and ΔG ^≠) of the dehydration process were calculated using the activated complex theory of Eyring. The kinetic parameters and thermodynamic functions of the activated complex for the dehydration process of Ni₃(PO₄)₂·8H₂O are reported for the first time.     

Thermosetting polymers from epoxy resin and a Nickel catalyst of diethylenetriamine

The kinetics and mechanism of cure reaction of DGEBA using a chelate of Ni(II) with diethylenetriamine (dien), Ni(dien)₂I_2, as a curing agent was studied by DSC. TG curve of the complex curing agent showed mass loss in two region of temperature: 200–320 and 450–550 °C. Dynamic DSC measurements showed only one exothermic peak with a maximum about 250 °C depending on the heating rate. According to the methods of KAS and Ozawa–Flynn–Wall the values of E _a were 92.5 and 96.2 kJ/mol, respectively. The isoconversional kinetic analysis in whole range of conversion, α = 0.02–0.95, showed small changes in the E _a values in the region of α = 0.04–0.6 and most likely represent some average values (E _a = 110 kJ/mol) between the values of E _a of non-autocatalyzed and autocatalyzed reactions. Using the sole dependence of E _a on α, the time required to reach fully cured materials under isothermal conditions were also predicted and compared with the experimental results.     

Thermal decomposition kinetics of potassium iodate

The effect of gamma ray irradiation on the rate and kinetics of thermal decomposition of potassium iodate (KIO₃) has been studied by thermogravimetry (TG) under non-isothermal conditions at different heating rates (3, 5, 7, and 10 K min^?1). The thermal decomposition data were analyzed using isoconversional methods of Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose, and Friedman. Irradiation with gamma rays increases the rate of the decomposition and is dependent on the irradiation dose. The activation energy decreases on irradiation. The enhancement of the rate of the thermal decomposition of KIO₃ upon irradiation is due to the combined effect of the production of displacements and extended lattice defects and chemical damage in KIO₃. Non-isothermal model fitting method of analysis showed that the thermal decomposition of irradiated KIO₃ is best described by the contracting sphere model equation, with an activation energy value of ~340 kJ mol^?1.     

Effect of nanosilica on thermal oxidative degradation of SBR

The effect of silica content on thermal oxidative stability of styrene–butadiene rubber (SBR)/silica composites has been studied. Morphologies of silica in SBR with different contents are investigated by scanning electron microscopy, which indicates that silica can well disperse in SBR matrix below the content of 40 %, otherwise aggregates or agglomerates will generate. Composites with around 40 % silica content show excellent mechanical properties and retention ratios after aging at 85 °C for 6 days. The values of activation energy (E _a) of pure SBR and its composites are calculated by Kissinger and Flynn–Wall–Ozawa methods based on thermogravimetric (TG) results, which suggests that composite with about 20 % silica has minimum E _a, and composite with 30–40 % silica has maximum E _a. According to TG curves, it is found that silica can suppress the formation of char leading to decline in stability to some extent. On the other side, silica also has positive effect on improving thermal stability of the matrix as filler. Thus, the SBR/silica composites with silica content of 30–40 % can possess both excellent resistance to thermal oxidative degradation and superior mechanical properties.     

Estimation of kinetic parameters for the phase change memory materials by DSC measurements

The non-isothermal method for estimating the kinetic parameters of crystallization for the phase change memory (PCM) materials was discussed. This method was applied to the perspective PCM material of Ge₂Sb₂Te₅ with different Bi contents (0, 0.5, 1, 3 mass%) for defining the kinetic triplet. Rutherford backscattering spectroscopy and X-ray diffraction were used to carry out elemental and phase analysis of the deposited films. Differential scanning calorimetry at eight different heating rates was used to investigate kinetics of thermally induced transformations in materials. Dependences of activation energies of crystallization (E _a) on the degree of conversion were estimated by model-free Ozawa–Flynn–Wall, Kissinger–Akahira–Sunose, Tang and Starink methods. The obtained values of E _a were quite close for all of these methods. The reaction models of the phase transitions were derived with using of the model-fitting Coats–Redfern method. In order to find pre-exponential factor A at progressive conversion values, we used values of E _a already estimated by the model-free isoconversional method. It was established that the crystallization processes in thin films investigated are most likely describes by the second and third-order reactions models. Obtained kinetic triplet allowed predicting transition and storage times of the PCM cells. It was found that thin films of Ge₂Sb₂Te₅ + 0.5 mass% Bi composition can provide the switching time of the phase change memory cell less than 1 ns. At the same time, at room temperature this material has a maximum storage time among the studied compositions.     

Effects of spice extracts on lipid fraction oxidative stability of cookies investigated by DSC

The addition of natural antioxidants to the bakery products containing fats can extend their shelf life, and it may be more attractive to consumers. In this research, the antioxidant effect of spice extracts and synthetic antioxidant on oxidative stability of fat extracted from cookies was evaluated by differential scanning calorimetry (DSC). The results revealed that addition of spice extracts to the cookies in comparison to cookies without additives reduced the oxidation as evidenced by higher the onset oxidation temperature (t _ON) of antioxidant-treated samples. Using the Ozawa–Flynn–Wall method, the activation energies (E _a/kJ mol^?1) and pre-exponential factors (Z/min^?1) and then induction times (τ/min) were calculated and also used for evaluation of antioxidants efficiency. After baking, cookies were also subjected to sensory studies and to instrumental measurements of colour changes. Among the samples studied, cookies with 0.02 % of rosemary or 0.2 % thyme extracts showed good sensorial acceptability. Cookies fortified with spice extracts also characterised greater lightness compared to the control sample.     

Investigation of thermal decomposition kinetics of taurine

The non-isothermal thermal decomposition of taurine was investigated by means of thermogravimetric analysis (TG) and differential thermal analysis (DTA). The experimental data were treated using Flynn–Wall–Ozawa, Doyle, Kissinger, and ?atava–?esták methods, respectively. The results show that the non-isothermal thermal decomposition mechanism of taurine is classified as phase boundary reaction, and the mechanism function is the Mampel Power law with n = 1. The forms of both integral and differential for the mechanism function are $ G(\alpha ) = \alpha $ and $ f(\alpha ) = 1 $ , respectively. The activation energy and the pre-exponential factor are 167.88 kJ mol^?1 and 1.82 × 10¹³min^?1, respectively.     

Thermal analysis, decomposition kinetics, and molecular modeling of transition metal (Fe, Co) surfactant complexes

A detailed thermal analysis of iron and cobalt surfactant complexes of the type [M(CH₃COO)₄]^2?[C₁₂H₂₅NH₃ ⁺]₂ has been carried out using Thermogravimetric (TG) analysis at different heating rates (i.e., 5, 10, 15, and 20 °C min^?1). It has been observed that iron complex decomposes by a different mechanism compared to other transition metal complexes. Metal is the final product instead of metal oxide. Combining the results from our previous study, first row transition metal complexes exhibit an order of stability in agreement with the famous Irving Williams series, i.e., the apparent activation energy, E for thermal decomposition varies as: E _Fe > E _Co < E _Ni < E _Cu > E _Zn (exception being iron because of different decomposition mechanism). Thermal decomposition parameters have been measured and compared using the multiple heating rate method of Flynn–Wall–Ozawa. Further, molecular modeling calculations have been carried out to compare the experimental TG data with theoretical computations for the synthesized metal surfactant complexes. Minimum energy optimized structures for the complexes have been obtained using Gaussian software.     

Synthesis of aromatic amine curing agent containing non-coplanar rigid moieties and its curing kinetics with epoxy resin

A kind of aromatic diamine, 4′, 4″-(2, 2-diphenylethene-1, 1-diyl)dibiphenyl-4-amine (TPEDA), was successfully synthesized via Suzuki coupling reaction. The TPEDA containing nonplanar rigid moieties can be used as epoxy resins curing agent to improve the complex properties of cured composites. The curing kinetics during thermal processing of E51/TPEDA system was investigated by nonisothermal differential scanning calorimeter. The average activation energy (E _α), pre-exponential factor (lnA), and reaction order (n) calculated from the Kissinger, the Ozawa, the Friedman and the Flynn–Wall–Ozawa methods were 55.8 kJ mol^?1, 9.4 s^?1 and 1.1, respectively. By the aid of estimated kinetic parameters, the predicted heat generation vs temperature curves fit well with the experimental data, which supported the validity of the estimated parameters and the applicability of the analysis method used in this work. By the introduction of nonplanar rigid moieties, the cured epoxy resins with TPEDA exhibited a higher glass transition temperature (T _g = 258 °C), good thermal stability (≈395 °C at 10 % mass-loss), and high char yield (36.6 % at 700 °C under nitrogen) compared with conventional curing agents.     

Preparation and characterization of microcapsulated red phosphorus and kinetic analysis of its thermal oxidation

Microcapsulated red phosphorus (MRP) with aluminum hydroxide/phenolic resin coating layer was prepared by a two-step coating process. The results of Fourier-transform infrared spectroscopy and scanning electron microscopy show that red phosphorus (RP) is coated by aluminum hydroxide and phenolic resin. MRP absorbs less water and is more thermally stable than RP. The thermal oxidation kinetics of MRP was investigated by TG/DTG/DTA under air atmosphere using non-isothermal experiments with the heating rates ranging from 10 to 25°C/min. The values of the apparent activation energy E _a were 168 ± 9 kJ/mol as determined by the isoconversional Ozawa–Flynn–Wall method and 164 ± 12 kJ/mol according to the Kissinger?Akahira?Sunose method. Based on Málek’s procedure the kinetic reaction follows the ?esták–Berggren model with f(α) = α0.34(1 ? α)^0.94 (α is RP conversion) and pre-exponential factor A = 3.11 × 10¹² s^–1. The simulated curves were fitted with experimental curves constructed by plotting dα/dt vs temperature at different heating rates.     

Growth,structural, crystallisation,thermal decomposition and dielectric behaviour of melaminium bis(hydrogen oxalate) single crystal

Single crystals of melaminium bis (hydrogen oxalate) (MOX) single crystals have been grown from aqueous solution by slow solvent evaporation method at room temperature. X-ray powder diffraction analysis confirms that MOX crystallises in monoclinic system with space group C2/c. The calculated lattice parameters are a = 20.075 ± 0.123 Å b = 8.477 ± 0.045 Å, c = 6.983 ± 0.015 Å, α = 90°, β = 102.6 ± 0.33°, γ = 90° and V = 1,159.73 (Å)³. Thermogravimetric analysis at three different heating rates 10, 15 and 20 °C min^?1 has been done to study the thermal decomposition behaviour of the crystal. Non-isothermal studies on MOX reveal that the decomposition occurs in two stages. Kinetic parameters [effective activation energy (E _a), pre-exponential factor (ln A)] of each stage were calculated by model-free method: Kissinger, Kim–Park and Flynn–Wall method and the results are discussed. A significant variation in effective activation energy (E _a) with conversion progress (α) indicates that the process is kinetically complex. The linear relationship between the ln A and E _a was established (compensation effect). DTA analyses were conducted at different heating rates and the activation energy was determined graphically from Kissinger and Ozawa equation. The average effective activation energy is calculated as 276 kJ mol^?1 for the crystallization peak. The Avrami exponent for the crystallization peak temperature determined by Augis and Bennett method is found to be 1.95. This result indicates that the surface crystallization dominates overall crystallization. Dielectric study has also been done, and it is found that both dielectric constant and dielectric loss decreases with increase in frequency and is almost a constant at high frequency region.     

Comparative kinetics studies of thermal decomposition of kalium, respectively natrium oxalato-oxo-diperoxo molibdate

The aim of this paper is to present the comparative kinetics of thermal decomposition of K₂[MoO(O₂)₂(C₂O₄)] (kalium oxalato-oxo-diperoxo molibdate), respectively Na₂[MoO(O₂)₂(C₂O₄)] (natrium oxalato-oxo-diperoxo molibdate). The TG data were obtained at different heating rates: β = 2.5, 4, 5, and 10 °C min^?1 in air and nitrogen (50 mL min^?1), and the TG/DTG data were processed with the following methods: Friedman, Flynn–Wall–Ozawa and modified-NPK method.     

The pyrolysis characteristics of moso bamboo

In the research, thermogravimetry (TG), a combination of thermogravimetry and Fourier transform infrared spectrometer (TG–FTIR) and X-ray diffraction (XRD) were used to investigate pyrolysis characteristics of moso bamboo (Phyllostachys pubescens). The Flynn–Wall–Ozawa and Coats–Redfern (modified) methods were used to determine the apparent activation energy (E_a). The TG curve indicated that the pyrolysis process of moso bamboo included three steps and the main pyrolysis occurred in the second steps with temperature range from 450 K to 650 K and over 68.69% mass was degraded. TG–FTIR analysis showed that the main pyrolysis products included absorbed water (H₂O), methane gas (CH₄), carbon dioxide (CO₂), acids and aldehydes, ammonia gas (NH₃), etc. XRD analysis expressed that the index and width crystallinity of moso bamboo gradually increased from 273 K to 538 K and cellulose gradually degraded from amorphous region to crystalline region. The E_a values of moso bamboo increased with conversion rate increase from 10 to 70. The E_a values were, respectively 153.37–198.55 kJ/mol and 152.14–197.87 kJ/mol based on Flynn–Wall–Ozawa and Coats–Redfern (modified) methods. The information was very helpful and significant to design manufacturing process of bio-energy, made from moso bamboo, using gasification or pyrolysis methods.     

Effect of functionalized multiwall carbon nanotubes on the curing kinetics and reaction mechanism of bismaleimide–triazine

Functionalized multiwall carbon nanotubes (f-MWCNTs) with varying functionalization degrees were prepared by chemical methods. The effect of f-MWCNTs on the cure kinetics of bismaleimide–triazine (BT) resin was studied through nonisothermal differential scanning calorimetry (DSC) methods. The reaction activation energy (E _α ) was determined by Flynn–Wall–Ozawa method. The results show that f-MWCNTs have more acceleration ability than pristine MWCNTs, due to more groups on the surface of f-MWCNTs than that of pristine MWCNTs. The activation energy was decreased from a value of 91.3 kJ mol^?1 for the neat BT resin to 74.2 kJ mol^?1 at the small mass loading (1.0 %) of f7-MWCNTs. The effect of f-MWCNTs on the reaction mechanism has been investigated. It shows that the f-MWCNTs accelerate the cure reaction of BT resin by providing the Lewis acids (H⁺) to make the “Diels–Alder” reaction and “ENE” reaction of BT resins more efficient. These findings offer useful insights into the cure technology of thermosetting resin filled with f-MWCNTs, without negative effect on the cure reaction.     

The use of the IKP method for evaluating the kinetic parameters and the conversion function of the thermal decomposition of NaHCO3 from nonisothermal thermogravimetric data

Three linear isoconversional methods (Friedman, Flynn–Wall–Ozawa, and Kissinger–Akahira–Sunose) and the invariant kinetic parameters (IKP) method were used in order to examine the kinetics of the nonisothermal decomposition of a sodium bicarbonate (NaHCO₃). The objective of the paper is to show the usefulness of the IKP method to determine both the kinetic parameters and the kinetic model of the investigated process. The activation energy (E_a) value obtained by the IKP method is in good agreement with the values obtained by isoconversional methods. The IKP method associated with the criterion of coincidence of kinetic parameters for all heating rates led us to the following kinetic triplet: E_a = 95.5 kJ mol^?1, A = 2.65 × 10¹⁰ min^?1, and conversion function f(α) = (1 ? α) (first‐order reaction model, F1). © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 462–471, 2007     

A study of thermal and dielectric behavior of melaminium perchlorate monohydrate single crystals

Single crystals of melaminium perchlorate monohydrate (MPM) have been grown from aqueous solution by slow solvent evaporation method at room temperature. X-ray powder diffraction analysis confirms the title crystal crystallizes in the triclinic (P-1) structure and the calculated lattice parameters are a = 5.6275 ± 0.0780 Å, b = 7.6926 ± 0.1025 Å, c = 12.0878 ± 0.2756 Å, α = 103.89 ± 1.01°, β = 94.61 ± 0.92°, γ = 110.22 ± 0.81°, and V = 468.95 Å³. The thermal decomposition behavior of MPM has been studied by means of thermogravimetric analysis at three different heating rates 5, 10, and 20 °C min^?1. The values of effective activation energy (E _a), pre-exponential factor (ln A) of each stage of thermal decomposition for all heating rates were calculated by model free method: Kissinger, Kim–Park, and Flynn–Wall method. A significant variation of effective activation energy (E _a) with conversion (α) indicates that the process is kinetically complex. The linear relationship between the A and E _a values was established (compensation effect). Dielectric study has also been carried out and it is found that both dielectric constant (ε′) and dielectric loss (ε″) decreases with increase in frequency.