Peak area measurements of cross-polarization magic-angle-spinning 13C-NMR spectra of crosslinked polystyrenes

Cross-polarization magic-angle-spinning ¹³C-NMR spectra of polystyrenes crosslinked with 1–20% of methine vinyl carbon ¹³C-labeled p-divinylbenzene and of Friedel–Crafts crosslinked poly(chloromethylstyrene)s have been obtained with both glossy solid and CDCl₃-swollen gel samples. The spectra of natural abundance, uncrosslinked, glassy polystyrene, and the spectra of the solid labeled networks give aliphatic and aromatic peak areas only 0.7 times as large per ¹³C atom as that of poly(oxymethylene). Similarly the crosslinked poly(chloromethylstyrene) gave peak areas about 0.6 times that of internal poly(oxymethylene). The labeled gels give peak areas 0.2–0.6 times as large per ¹³C atom as glassy polystyrene, and the peak areas in spectra of gels increase with the divinylbenzene content     

Comparative characteristic studies on soil and commercial humic acids

Summary Two commercial and eight soil humic acids were characterized to evaluate the use of commercial humic materials in soil and environmental studies. Significant differences between commercial and soil humic acids were observed in ash content, major and micro-element constituents, E₄/E₆ ratio, total acidity and ¹³C-NMR spectroscopy; but data from stability constant and IR-spectroscopy were almost identical. The commercial materials appeared to be significantly less aromatic and more aliphatic in nature as compared with representative soil humic acids. The above discrepancies were interpreted as indicating an origin of the respective commercial product other than soil. The two commercial humic acids investigated may not originate from the same source material as evidenced by clear-cut differences in the intensity of the ¹³C-NMR spectra in almost all chemical shift regions. Due to the observed structural, compositional and characteristic dissimilarities, both between soil and commercial humic acids and between different commercial ones, the commercial humic products are not recommended to be used as analogues of real soil humic acids in soil and environmental studies.     

High resolution solid‐state 13C‐NMR study of as‐cured and irradiated epoxy resins

This article presents the effects of strong ionizing radiations on the physico‐chemical modifications of aliphatic or aromatic amine‐cured epoxy resins based on diglycidyl ether of bisphenol A (DGEBA). Such epoxy resins have a considerable number of applications in the nuclear industrial field and are known to be very stable under moderate irradiation conditions. Using extensively high resolution solid‐state ¹³C‐NMR spectroscopy we show that the aliphatic amine‐cured resin (DGEBA‐TETA) appears much more sensitive to gamma rays than the aromatic amine‐cured one (DGEBA‐DDM). On the one hand, qualitative analyses of the high resolution solid‐state ¹³C‐NMR spectra of both epoxy resins, irradiated under similar conditions (8.5 MGy), reveal almost no change in the aromatic amine‐cured resin whereas new resonances are observed for the aliphatic amine‐cured resin. These new peaks were interpreted as the formation of new functional groups such as amides, acids and/or esters and to alkene groups probably formed in the aliphatic amine skeleton. On the other hand, molecular dynamics of these polymers are investigated by measuring the relaxation times, T_CH, T_1ρH and T_1C , before and after irradiation. The study of relaxation data shows the formation, under irradiation, of a more rigid network, especially for the aliphatic amine‐cured system and confirms that aromatic amine‐cured resin [DGEBA‐4,4′‐diaminodiphenylmethane(DDM)] is much less affected by ionizing radiations than the aliphatic amine‐cured resin [DGEBA‐triethylenetetramine(TETA)]. Moreover, it has been shown that the molecular modifications generated by irradiation on the powder of the aliphatic‐amine‐cured resin appear to be homogeneously distributed inside the polymers as no phase separations can be deduced from the above analyses. Copyright © 2001 John Wiley & Sons, Ltd.     

Investigation of a resorcinol–formaldehyde resin by 13C-NMR spectroscopy and intrinsic viscosity measurement

Various molecular weight fractions and oligomers isolated from a novolac type resorcinol–formaldehyde (RF) wood adhesive resin were studied by ¹³C-NMR, gel permeation chromatography (GPC), and intrinsic viscosity measurements. The ¹³C-NMR results indicate that methylene groups occur mostly between C₄–C′₄ and C₂–C′₄ carbons and in minor amounts between C₂–C′₂ carbons of resorcinol rings. By suppressing the nuclear Overhauser effect (nOe) and using a long delay time for ¹³C-NMR measurements, reasonable methylene/aromatic carbon ratios were obtained from the aromatic C₁ carbon patterns that have resulted from different numbers of methylene groups bonded on the aromatic ring. This analysis results indicate that the RF resin has an appreciable amount of branch structures and compare favorably with the gel permeation chromatography and intrinsic viscosity measurement results. © 1993 John Wiley & Sons, Inc.     

Functional polymers. XIX. Biuret oligomers and polymers of biologically active primary aliphatic amines

Biuret oligomers and polymers from primary aliphatic amines and aromatic or aliphatic diisocyanates have been synthesized. To demonstrate the feasibility of the synthesis of polybiurets, aliphatic primary amines with n-propyl, n-hexyl, n-octyl, and n-dodecyl groups have been incorporated. For the synthesis of biuret oligomers of biologically active primary aliphatic amines [8-(4-amino-1-methylbutylamino)-6-methoxyquinoline] (primaquine) and adamantanamine were selected. Primaquine was also incorporated into polyepichlorohydrin by nucleophilic substitution of the chlorine of the chloromethyl group by the primary aliphatic amino group of primaquine. The structure of the biuret polymers was established by elemental analysis, and by infrared ¹H- and ¹³C-NMR spectroscopic characterization. Several attempts to use primaquine as a diamine for the formation of condensation polymers, including reaction of primaquine with sebacoyl chloride (to form polyamides), or with diisocyanates (to form polyureas) were unsuccessful.     

Furan-based Polysemiacylcarbazides by Polyaddition of Bis(furanic hydrazide)s with Diisocyanates

A solution polyaddition procedure was applied to prepare furanic polyacylsemicarbazides based on 2,2′-isopropylidene-bis(5-(2-furoyl) hydrazide) and aliphatic or aromatic diisocyanates. Model compounds were prepared to facilitate the synthesis and the characterization of the polymers. A systematic study of reaction parameters (the nature of the organic phase, the temperature, the reaction time, and the concentration of monomers) was carried out. High MW polymers were obtained after 12 h reaction at 20°C with 0.2 M monomer solutions in dimethylacetamide. In fact, the polyacylsemicarbazides obtained had inherent viscosities ranging from 0.63 to 0.85 dL/g. There showed good solubility in aprotic polar solvents. The ¹H and ¹³C-NMR spectra were consistent with the expected structures. These furan-based polyacylsemicarbazides are thermally stable up to 290°C, but exhibit a complex thermal behavior. This was explained by the cyclohydration of acylsemicarbazide groups into NH-substituted oxadiazoles, resulting in rigid and high melting polymers, less stable, however, than conventional aromatic polyoxadiazoles.     

Application of gel-phase 13c-nmr to monitor solid phase peptide synthesis

The results presented in this article show the general applicability of gel-phase ¹³C-NMR to monitor solid phase peptide synthesis on the most commonly used polystyrene-based resins. The optimal conditions to acquire gel-phase ¹³C-NMR spectra of copoly(styrene-l%-divinylbenzene) has been determined. The technique proved to be applicable to characterize polystyrene-based starting supports as well as to the determination of their degree of functionality and purity. The stage-by-stage ¹³C-NMR characterization of the growing peptide chain during the synthesis of tripeptide H-Asn-(N-Me)Ala-Thr-NH₂ on a benzhydrylamine resin is described. The structural information, derived from this technique is relevant for the synthetic process as the spectra can be acquired under similar conditions. The characteristics of the spectra facilitate monitoring of coupling and deprotection reactions.     

Conformational Analysis of the cis- and trans-Isomers of FK506 by NMR and Molecular Dynamics

The potent immunosuppressant drug FK506 ( 2 ) has been examined by ¹H- and ¹³C-NMR spectroscopy and NOE-restrained molecular dynamics to elucidate the conformation in solution. A combination of two- and three-dimensional NMR techniques was used to completely assign the ¹H- and ¹³C-NMR chemical shifts of the two configurational isomers resulting from the cis-trans isomerization about the single amide bond. Hetero- and homonuclear coupling constants were measured to assign the diastereotopic methylene protons at C(16), C(18), and C(23). Intramolecular H? H distances were defined from NOESY spectra recorded at ?30° in CDCl₃ and used as constraints in molecular-dynamics simulations. The conformational preferences of 2 in solution are discussed in light of the constitutional features recently proposed to be necessary for binding and activity.     

Microstructure elucidation of poly(epichlorohydrin) modified with thiol compounds using one- and two-dimensional NMR spectroscopy

Poly(epichlorohydrin) has been modified chemically using aromatic and aliphatic thiol compounds. The NMR results show that using both aromatic and aliphatic thiols, one achieves degrees of modification of up to 90% without any elimination side reaction. As a consequence no degradative chain-scission takes place. A microstructural analysis of the modified polymers has been carried out by ¹³C NMR, ¹H NMR and ¹³C DEPT spectroscopy. Additionally, 2D heteronuclear correlated spectroscopy (HMQC and HMBC) were used in order to determine the chemical shifts of quaternary carbons.     

Solid-state 13C-NMR analysis of hypercrosslinked polystyrene

Hypercrosslinked polystyrenes, synthesized by reaction of linear or lightly crosslinked polystyrene with chloromethyl methyl ether (CME) and a Lewis acid in a good solvent, swell even in nonsolvents for polystyrene. Structures and dynamics of hypercrosslinked polystyrenes in both dry solid and solvent-swollen gel states have been determined by ¹³C-NMR spectroscopy. Deconvolution of ¹³C solid-state CP/MAS spectra gave the relative numbers of quaternary carbon atoms in monosubstituted and disubstituted benzenes. A typical sample, crosslinked by reaction of a mixture containing 0.5 mol of CME per mol of repeat units, contains 35% of unreacted and 65% of crosslinked aromatic rings, and no residual chloromethyl groups. Gels swollen in CDCl₃ and in CH₃OH have residual static dipolar interactions enabling crosspolarization and require magic angle spinning (MAS) and high power ¹H decoupling to reduce chemical shift anisotropy from ∼ 10⁴ Hz to ∼ 10³ Hz. A single proton spin-lattice relaxation time in the rotating frame measured from all peaks in the ¹³C spectra of dry samples indicates homogeneity on a nanometer scale. Proton NMR line widths indicate no substantial molecular motions in a dry hypercrosslinked polystyrene up to at least 200°C. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 695–701, 1997     

Selective nucleophilic substitution reactions on poly(epichlorohydrin) using aromatic and aliphatic thiol compounds

Poly(epichlorohydrin) has been modified chemically using aromatic and aliphatic thiol compounds. The reactivity and kinetics of these modifiers with respect to substitution and elimination was studied. Therefore, the chemical structure of the reaction products was analysed using ¹³C NMR, ¹H NMR and ¹³C-DEPT spectroscopies. It is shown that both, aromatic as well as aliphatic thiols, are highly selective with respect to nucleophilic substitution as reaction conditions can be found which allow one to achieve degrees of modification of up to 90% without any elimination side-reaction. As a consequence no degradative chain-scission takes place what has been confirmed by GPC analysis.A comparison between both types of thiol modifiers shows that aromatic ones react faster and that higher degrees of modification are reached than with their aliphatic homologues.     

Composition of Ni2+ cation solvation shell in NiCl2–methanol solution by multinuclear NMR

¹H-, ²H- and ¹³C-NMR spectra have been used to test the Ni²⁺ solvation shell composition in the 1.1 molal methanol solution of NiCl₂. It has been confirmed that Cl^? anion takes part in the nearest environment of Ni²⁺ cation at all the temperatures investigated. Using ²H-NMR allowed us to detect for the first time OD-signal of methanol in the primary solvation shell of Ni²⁺ cation. Both ²H- and ¹³C-NMR spectra show that the composition of the cation solvation shell becomes more complicated at temperatures lower than 220?K.     

Zur Verwendbarkeit von 13C-Substituenteninkrementen bei 1,4-Benzo- und 1,4-Naphthochinonen

About the Availability of ¹³C-NMR Substituent Increments in 1,4-Benzo- and 1,4-Naphthoquinones The ¹³C-NMR spectra of a number of substituted 1,4-benzo- and 1,4-naphthoquinones have been obtained and assigned. Effects of CH₃-, O-alkyl-, Cl-, NH₂- and N₃- substituents have been deduced for the quinoid part of the molecules and used for the calculation of ¹³C-chemical shifts.     

~(13)C-NMR研究聚苯乙烯的序列分布

<正> ~(13)C-NMR谱是目前认为用来研究高聚物序列分布的较好方法。对各种聚苯乙烯的序列分布,前人已做了许多工作,然而无论是对亚甲基(CH_2)或对芳C_1进行分峰,各谱峰的归属及其序列分布统计都没有一致的意见。     

Novel bisbenzopyronopyran derivatives: photochemical synthesis and their in-vitro antimicrobial studies

The present research work describes the productive synthesis of novel bisbenzopyronopyran derivatives 4(a-h) and 5(a-h) via the photocyclization reactions of bischromones 3(a-h) under the inert conditions. The latter compounds have been realized efficiently through the O-alkylation reactions of the 3-hydroxychromone 2 with suitable dihalogenated aliphatic/aromatic/heteroaromatic reagents in the presence of dry acetone/anhydrous K₂CO₃/Bu₄N⁺I⁻ (PTC). The cyclization reaction of chalcone 1 under the Algar-Flynn-Oyamada reaction conditions (KOH/H₂O₂) could results in the formation of compound 2 in the good yield. The structural scaffolds of the newly prepared bischromones and resultant bisbenzopyronopyrans have been certified from the meticulous analysis of their various spectroscopic parameters such as UV-Vis, IR, ¹H/¹³C-NMR, and ESI-MS. It was found that o/m/p-xylene and pyridine-linked final symmetrical bistetracycles exhibited higher antimicrobial potencies as compared to alkyl chain-linked cyclized products. The bischromones 3(a-h) could be able to endow modest level of antimicrobial behavior.     

Na2CO3/SOCl2: A MILD AND CONVENIENT REAGENT FOR THE PREPARATION OF ISOPROPYL CARBOXYLATES

Na₂CO₃/SOCl₂ has been used for esterification of aliphatic and aromatic acids with isopropanol. This esterification method is compatible with a wide assortment of functional groups.     

Synthesis and Characterization of Amphiphilic PEG Based Aliphatic and Aromatic Polymers and their Self-Assembling Behavior

Twelve amphiphilic polymers were synthesized using poly(ethylene glycols) (PEGs) of different molecular weights, viz. 1000, 2000 and 4000 as hydrophilic block and linkers namely azelaic acid, sebacic acid, dimethyl isophthalate acid and dimethyl terephthalate as hydrophobic block in the presence of catalyst Conc. H₂SO₄. Synthesized polymers were characterized by using ¹H-NMR, ¹³C-NMR and IR spectroscopy. Micellar sizes of the polymers were determined using Dynamic Light Scattering (DLS) which ranged from 51.6–174 nm for aliphatic polymers and 135.5–371 nm for aromatic polymers. Transmission Electron Microscope (TEM) results confirm the findings of DLS. Critical Micelle Concentrations (CMC) of the synthesized polymers were determined using electrical conductivity meter which ranged from 95 to 130 mg L^?1 for aliphatic polymers and 420–1500 mg L^?1 for aromatic polymers.     

Microwave-assisted synthesis of rhodamine derivatives

The microwave synthesis of 12 rhodamine-derived imines is described. The present work involves condensation of rhodamine hydrazide with various aromatic aldehydes in ethanol under microwave irradiation. The results obtained indicate that, unlike classical heating, microwave irradiation results in higher yields, shorter reaction time, mild reaction condition and simple work-up procedure. The structures of synthesized compounds were confirmed by ¹H-NMR, ¹³C-NMR, FT-IR and high-resolution mass spectra data.     

Résonance Magnétique Nucléaire de 17O. Aldéhydes et cétones aliphatiques: additivité des effets de substitution et corrélation avec la 13C-RMN

¹⁷O-NMR. Aliphatic aldehydes and ketones, additivity of substituent effects and correlation with ¹³C-NMR. The ¹⁷O-chemical shifts of 9 aldehydes, 22 aliphatic and 4 alicyclic ketones, in the natural abundance FT.-NMR. spectra followed a good correlation with the ¹³C-chemical shifts of the terminal C-atoms of corresponding methylene compounds. An additivity relation involving 6 parameters represents the ¹⁷O-shifts of 28 of the measured products with a standard deviation of 2.5 ppm. The additivity parameters are discussed with respect to the modifications of the polarity of the carbonyl group induced by the hyperconjugative interaction of π and π* orbitals with the πCH ₃ orbitals of the alkyl substituent groups.