On surface waves in generalized thermoelasticity

Knowles' representation theorem for harmonically time-dependent free surface waves on a homogeneous, isotropic elastic half-space is extended to include harmonically time-dependent free processes for thermoelastic surface waves in generalized thermoelasticity of Lord and Shulman and of Green and Lindsay.r , , r , , .This work was done when author was unemployed.     

Transport in ordered and disordered porous media II: Generalized volume averaging

In this paper we develop the averaged form of the Stokes equations in terms of weighting functions. The analysis clearly indicates at what point one must choose a media-specific weighting function in order to achieve spatially smoothed transport equations. The form of the weighting function that produces the cellular average is derived, and some important geometrical theorems are presented.Roman Letters A interfacial area of the- interface associated with the local closure problem, m² - A _e area of entrances and exits for the-phase contained within the averaging system, m² - A _p surface area of a particle, m² - d _p 6V _p/A_p, effective particle diameter, m - g gravity vector, m/s² - I unit tensor - K _m permeability tensor for the weighted average form of Darcy's law, m² - L general characteristic length for volume averaged quantities, m - L _p general characteristic length for volume averaged pressure, m - L characteristic length for the porosity, m - L _v characteristic length for the volume averaged velocity, m - l characteristic length (pore scale) for the-phase - l _i i=1, 2, 3 lattice vectors, m - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - m _v special convolution product weighting function associated with the traditional averaging volume - m _g general convolution product weighting function - m _V unit cell convolution product weighting function - m _C special convolution product weighting function for ordered media which produces the cellular average - m _D special convolution product weighting function for disordered media - m _M master convolution product weighting function for ordered and disordered media - n unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p_m superficial weighted average pressure, N/m² - p _m intrinsic weighted average pressure, N/m² - p traditional intrinsic volume averaged pressure, N/m² - p p p _m , spatial deviation pressure, N/m² - r ₀ radius of a spherical averaging volume, m - r _m support of the convolution product weighting function, m - r position vector, m - r position vector locating points in the-phase, m - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - V velocity vector in the-phase, m/s - vm superficial weighted average velocity, m/s - v _m intrinsic weighted average velocity, m/s - V volume of the-phase contained in the averaging volume, m³ - V _p volume of a particle, m³ - v traditional superficial volume averaged velocity, m/s - v v p _m spatial deviation velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - _m m * . weighted average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m² - V /V, volume fraction of the-phase     

The effect of background particulates on the delayed transition of a heated 9:1 ellipsoid

An experimental study was done to quantify the effects of a variety of background particulates on the delayed laminar-turbulent transition of a thermally stabilized boundary layer in water. A Laser-Doppler Velocimeter system was used to measure the location of boundary layer transition on a 50 mm diameter, 9:1 fineness ratio ellipsoid. The ellipsoid had a 0.15 m RMS surface finish. Boundary layer transition locations were determined for length Reynolds numbers ranging from 3.0 × 10⁶ to 7.5 × 106. The ellipsoid was tested in three different heating conditions in water seeded with particles of four distinct size ranges. For each level of boundary layer heating, measurements of transition were made for clean water and subsequently, water seeded with 12.5 m, 38.9 m, 85.5 m and 123.2 m particles, alternately. The three surface heating conditions tested were no heating, T = 10°C and T = 15°C where T is the difference between the inlet model heating water temperature, T _i, and free stream water temperature, T . The effects of particle concentration were studied for 85.5 m and 123.2 m particulates.The results of the study can be summarized as follows. The 12.5 m and 38.9 m particles has no measurable effect on transition for any of the test conditions. However, transition was significantly affected by the 85.5 m and 123.2 m particles. Above a length Reynolds number of 4 × 10⁶ the boundary layer transition location moved forward on the body due to the effect of the 85.5 m particles for all heating conditions. The largest percentage changes in transition location from clean water, were observed for 85.5 m particles seeded water.Transition measurements made with varied concentrations of background particulates indicated that the effect of the 85.5 m particles on the transition of the model reached a plateau between 2.65 particulates/ml concentration and 4.2 particles/ml. Measurements made with 123.3 m particles at concentrations up to 0.3 part/ml indicated no similar plateau.     

Transport in ordered and disordered porous media I: The cellular average and the use of weighting functions

In this work we consider transport in ordered and disordered porous media using singlephase flow in rigid porous mediaas an example. We defineorder anddisorder in terms of geometrical integrals that arise naturally in the method of volume averaging, and we show that dependent variables for ordered media must generally be defined in terms of thecellular average. The cellular average can be constructed by means of a weighting function, thus transport processes in both ordered and disordered media can be treated with a single theory based on weighted averages. Part I provides some basic ideas associated with ordered and disordered media, weighted averages, and the theory of distributions. In Part II a generalized averaging procedure is presented and in Part III the closure problem is developed and the theory is compared with experiment. Parts IV and V provide some geometrical results for computer generated porous media.Roman Letters A interfacial area of the- interface contained within the macroscopic region, m² - A_e area of entrances and exits for the-phase contained within the macroscopic system, m² - g gravity vector, m/s² - I unit tensor - K traditional Darcy's law permeability tensor, m² - L general characteristic length for volume averaged quantities, m - characteristic length (pore scale) for the-phase - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - N unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p0 reference pressure in the-phase, N/m² - p traditional intrinsic volume averaged pressure, N/m² - r0 radius of a spherical averaging volume, m - r position vector, m - r position vector locating points in the-phase, m - averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - v velocity vector in the-phase, m/s - v traditional superficial volume averaged velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V/V, volume average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m²     

Peristaltic pumping of a second-order fluid in a planar channel

The peristaltic motion of a non-Newtonian fluid represented by the constitutive equation for a second-order fluid was studied for the case of a planar channel with harmonically undulating extensible walls. A perturbation series for the parameter ( half-width of channel/wave length) obtained explicit terms of 0(²), 0(²Re²) and 0(₁Re²) respectively representing curvature, inertia and the non-Newtonian character of the fluid. Numerical computations were performed and compared to the perturbation analysis in order to determine the range of validity of the terms.Presented at the second conference Recent Developments in Structured Continua, May 23–25, 1990, in Sherbrooke, Québec, Canada     

Normal forms for random diffeomorphisms

Given a dynamical system (,, ,) and a random diffeomorphism (): ^{d d} with fixed point at x=0. The normal form problem is to construct a smooth near-identity nonlinear random coordinate transformation h() to make the random diffeomorphism ()=h()^–1() h() as simple as possible, preferably linear. The linearization D(, 0)=:A() generates a matrix cocycle for which the multiplicative ergodic theorem holds, providing us with stochastic analogues of eigenvalues (Lyapunov exponents) and eigenspaces. Now the development runs pretty much parallel to the deterministic one, the difference being that the appearance of turns all problems into infinite-dimensional ones. In particular, the range of the homological operator is in general not closed, making the conceptof-normal form necessary. The stochastic versions of resonance and averaging are developed. The case of simple Lyapunov spectrum is treated in detail.     

Filament stretching equation in Lagrangian coordinates

The general integral of the very simple equation ^21/n/() was found to describe the cross sectional area of filaments of isothermal power law fluids while in transient stretching where is time and is the initial location of fluid molecules at time = 0 given as the distance from a reference point fixed in space. Any such stretching transient given as a solution of the above equation is physically realizable subject to the restrictions > 0 and/ < 0.     

Flow visualization of compressible vortex structures using density gradient techniques

Mathematical results are derived for the schlieren and shadowgraph contrast variation due to the refraction of light rays passing through two-dimensional compressible vortices with viscous cores. Both standard and small-disturbance solutions are obtained. It is shown that schlieren and shadowgraph produce substantially different contrast profiles. Further, the shadowgraph contrast variation is shown to be very sensitive to the vortex velocity profile and is also dependent on the location of the peak peripheral velocity (viscous core radius). The computed results are compared to actual contrast measurements made for rotor tip vortices using the shadowgraph flow visualization technique. The work helps to clarify the relationships between the observed contrast and the structure of vortical structures in density gradient based flow visualization experiments.Nomenclature a Unobstructed height of schlieren light source in cutoff plane, m - c Blade chord, m - f Focal length of schlieren focusing mirror, m - C _T Rotor thrust coefficient, T/( ² R ⁴) - I Image screen illumination, Lm/m ² - l Distance from vortex to shadowgraph screen, m - n _b Number of blades - p Pressure,N/m ² - p Ambient pressure, N/m ² - r, , z Cylindrical coordinate system - r _c Vortex core radius, m - Non-dimensional radial coordinate, (r/r _c ) - R Rotor radius, m - Tangential velocity, m/s - Specific heat ratio of air - Circulation (strength of vortex), m ²/s - Non-dimensional quantity, ² 8²p r _c ² - Refractive index of fluid medium - ₀ Refractive index of fluid medium at reference conditions - Gladstone-Dale constant, m ³/kg - Density, kg/m ³ - Density at ambient conditions, kg/m ³ - Non-dimensional density, (/ ) - Rotor solidity, (n _b c/ R) - Rotor rotational frequency, rad/s     

On laminar flow through a uniformly porous pipe

Numerous investigations ([1] and [4–9]) have been made of laminar flow in a uniformly porous circular pipe with constant suction or injection applied at the wall. The object of this paper is to give a complete analysis of the numerical and theoretical solutions of this problem. It is shown that two solutions exist for all values of injection as well as the dual solutions for suction which had been noted by previous investigators. Analytical solutions are derived for large suction and injection; for large suction a viscous layer occurs at the wall while for large injection one solution has a viscous layer at the centre of the channel and the other has no viscous layer anywhere. Approximate analytic solutions are also given for small values of suction and injection.

Nomenclature

General r distance measured radially - z distance measured along axis of pipe - u velocity component in direction of z increasing - v velocity component in direction of r increasing - p pressure - density - coefficient of kinematic viscosity - a radius of pipe - V velocity of suction at the wall - r ²/a ² - R wall or suction Reynolds number, Va/ - f() similarity function defined in (6) - u ₀() eigensolution - U(0) a velocity at z=0 - K an arbitrary constant - B _K Bernoulli numbers Particular Section 5 perturbation parameter, –2/R - ² a constant, –K - x / - g(x) f()/ Section 6 perturbation parameter, –R/2 - ² a constant, –K - g() f() - g _c ()=g() near centre of pipe - * point where g()=0 Section 7 2/R - ² K - t (1–)/ - w(t, ) [1–f(t)]/ - ₀, ₁ constants - g() f()– ₀ - ₀/ - ₀ a constant - * point where f()=0     

Interpolation formulas for maxwell viscosity of certain metals as a function of shear-strain intensity and temperature

The purpose of this study is the construction of interpolation formulas for the dependence of Maxwell viscosity, a quantity which is the reciprocal of shear-strain relaxation time , on shear-strain intensity and temperature for several metals: iron, aluminum, copper, and lead. This function was interpolated in various temperature and deformation velocity ranges in accordance with available experimental data for iron (0 10⁷ sec^–1, 200 ° T 1500 °); aluminum (0 10⁷ sec^–1, 300 ° T 900 °); copper (0 10⁵ sec^–1, 300 ° T 1300 °); lead (0 10⁶ sec^–1, 90 ° T 400 °); temperatures in °K.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 4, pp. 114–118, July–August, 1974.     

Hydrodynamic models as applied to the investigation of magnetic plasma stability

In the present paper magnetohydrodynamic models are employed to investigate the stability of an inhomogeneous magnetic plasma with respect to perturbations in which the electric field may be regarded as a potential field (rot E 0). A hydrodynamic model, actually an extension of the well-known Chew-Goldberg er-Low model [1], is used to investigate motions transverse to a strong magnetic field in a collisionless plasma. The total viscous stress tensor is given; this includes, together with magnetic viscosity, the so-called inertial viscosity.Ordinary two-fluid hydrodynamics is used in the case of strong collisions=. It is shown that the collisional viscosity leads to flute-type instability in the case when, collisions being neglected, the flute mode is stabilized by a finite Larmor radius. A treatment is also given of the case when epithermal high-frequency oscillations (not leading immediately to anomalous diffusion) cause instability in the low-frequency (drift) oscillations in a manner similar to the collisional electron viscosity, leading to anomalous diffusion.Notation f particle distribution function - E electric field component - H₀ magnetic field - density - V particle velocity - e charge - m, M electron and ion mass - _i, _e ion and electron cyclotron frequencies - viscous stress tensor - P pressure - r_i Larmor radius - P pressure tensor - t time - frequency - T temperature - collision frequency - collision time - j current density - _i, _e ion and electron drift frequencies - k_x, k_y, k_z wave-vector components - n₀ particle density - g acceleration due to gravity. The authors are grateful to A. A. Galeev for valuable discussion.     

Mean and turbulent velocity measurements of supersonic mixing layers

The behavior of supersonic mixing layers under three conditions has been examined by schlieren photography and laser Doppler velocimetry. In the schlieren photographs, some large-scale, repetitive patterns were observed within the mixing layer; however, these structures do not appear to dominate the mixing layer character under the present flow conditions. It was found that higher levels of secondary freestream turbulence did not increase the peak turbulence intensity observed within the mixing layer, but slightly increased the growth rate. Higher levels of freestream turbulence also reduced the axial distance required for development of the mean velocity. At higher convective Mach numbers, the mixing layer growth rate was found to be smaller than that of an incompressible mixing layer at the same velocity and freestream density ratio. The increase in convective Mach number also caused a decrease in the turbulence intensity ( _u/U).List of symbols a speed of sound - b total mixing layer thickness between U ₁ – 0.1 U and U ₂ + 0.1 U - f normalized third moment of u-velocity, f u³/(U)³ - g normalized triple product of u² , g u²/(U)³ - h normalized triple product of u ², h u ²/(U)³ - l _u axial distance for similarity in the mean velocity - l _u axial distance for similarity in the turbulence intensity - M Mach number - M _c convective Mach number (for ₁ = ₂), M _c (U ₁ – U ₂)/(a ₁ + a ₂) - P static pressure - r freestream velocity ratio, r U ₂/U ₁ - Re unit Reynolds number, Re U/ - s freestream density ratio, s ₂/₁ - T _t total temperature - u instantaneous streamwise velocity - u deviation of u-velocity, uu – U - U local mean streamwise velocity - U ₁ primary freestream velocity - U ₂ secondary freestream velocity - average of freestream velocities, (U ₁ + U ₂)/2 - U freestream velocity difference, U U ₁ – U ₂ - instantaneous transverse velocity - v deviation of -velocity, – V - V local mean transverse velocity - x streamwise coordinate - y transverse coordinate - y ₀ transverse location of the mixing layer centerline - ensemble average - ratio of specific heats - boundary layer thickness (y-location at 99.5% of free-stream velocity) - similarity coordinate, (y – y ₀)/b - compressible boundary layer momentum thickness - viscosity - density - standard deviation - dimensionless velocity, (U – U ₂)/U - 1 primary stream - 2 secondary stream A version of this paper was presented at the 11th Symposium on Turbulence, October 17–19, 1988, University of Missouri-Rolla     

Contribution to the asymptotic theory of quasisteady viscous flows

The aim of this paper is to obtain equations which, as Re , describe quasisteady viscous incompressible flows with stream surfaces that are closed only in the limit as Re , and also to examine the simpler consequences of these equations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 46–51, July–August, 1985.The author wishes to thank V. Ya. Neiland for taking an interest in his work and discussing the results.     

Static and dynamic behaviour of a rigid rotor on journal bearings

This experimental investigation concerns the static and dynamic behaviour of a rigid balanced rotor on journal bearings. Running conditions were chosen in order to obtain relatively high eccentricity ratios near the instability threshold speeds.The results, compared also with the theoretical predictions of some authors, have substantially shown the importance of examining the static behaviour near the instability threshold speed to allow a correct interpretation of some aspects of the dynamic behaviour.In order to clarify the discrepancies between the observed and the theoretically predicted dynamic behaviour, some further tests have been carried out.

---

Sommario E' stato esaminato sperimentalmente sia il comportamento statico che quello dinamico di un rotore rigido e bilanciato sostenuto da cuscinetti cilindrici lubrificati.Le condizioni di funzionamento sono state scelte in modo tale che, in prossimità della soglia di instabilità, il valore del rapporto di eccentricità risultasse relativamente grande.I risultati, confrontati anche con le indicazioni teoriche di altri autori, hanno sostanzialmente evidenziato l'importanza dell'esame del comportamento statico in prossimità della soglia di instabilità al fine di interpretare correttamente alcuni aspetti del fenomeno dell'instabilità.Sono state inoltre effettuate una serie di ulteriori indagini con lo scopo di chiarire le discordanze fra il comportamento dinamico osservato e quello previsto dalla teoria.

     

New concepts in relative permeabilities at high capillary numbers for surfactant flooding

Flooding oil reservoirs with surfactant solutions can increase the amount of oil that can be recovered. Macroscopic modelling of the process requires relative permeabilities to be functions of saturation and capillary number. With only limited experimental data, relative permeabilities have usually been assumed to be linear functions of saturation at high capillary numbers. The experimental data is reviewed, some of which suggest that this assumption is not necessarily correct. The basis for the assumption is therefore reviewed and it is concluded that the linear model corresponds to microscopically segregated flow in the porous medium. Based on new but equally plausible complementary assumptions about the flow pattern, a mixed flow model is derived. These models are then shown to be limiting cases of a droplet model which represents the mixing scale within the porous medium and gives a physical basis for interpolating between the models. The models are based on physical concepts of flow in a porous medium and so the approach described here represents a significant improvement in the understanding of high capillary number flow. This is shown by the fact that fewer parameters are needed to describe experimental data.Notation A total cross-sectional area assigned to capillary bundle - A ⁽ⁱ⁾ physical cross-sectional area of tube i - c ⁽ⁱ⁾ ordered configurational label for droplets in tube i - c configuration label for tube i (order not considered) - D defined by Equation (26) - E(...) expectation value with respect to the trinomial distribution - S _r ⁽⁾ fractional flow of phase - k absolute permeability - k _r relative permeability of phase - k _r ⁰ endpoint relative permeability of phase - L capillary tube length in bundle model - m ⁽ⁱ⁾ number of droplets of phase a occupying tube i - n exponent for phase a in Equation (2) - N number of droplets in bundle model - N _c capillary number - p pressure - p(c') probability of configuration c - Q ⁽ⁱ⁾ total volume flow rate in tube i - S saturation of phase - S flowing saturation of phase - S _r residual saturation of phase - S _r ⁽⁾ saturations when fractional flow of phase is 1 in the case of varying residual saturations for three-phase flow ( ) - t _c residence time for droplet configuration c - v ⁽ⁱ⁾ total fluid velocity in bundle tube i - , phase label - p pressure differential across capillary bundle - ⁽ⁱ⁾ tube conductivity defined by Equation (7) - viscosity of phase - interfacial tension - gradient operator - ... average over tube droplet configurations     

An Algebraic Method of Stabilization for a Class of Boundary Control Systems of Parabolic Type

Stabilization of linear parabolic boundary control systems is studied. The boundary control system is composed of a system of linear differential operators (, ) in a bounded domain with the smooth boundary. A significant feature of the paper is that, while being a standard elliptic operator, characterizes the boundary condition partly of the Dirichlet type and partly of the generalized Neumann type. We present a new algebraic approach and show that the stabilization is achieved under the standard controllability and observability conditions associated with the system.     

Modèles intégro-différentiels isotropes en viscoélasticité linéaire

Summary In this work, we consider isotropic viscoelastic materials characterized by a linear relation between stress and strain and their time derivatives up to the orderm,n. We observe thatColeman's thermodynamics does not imply the causality of the model but that a stronger requirement ofMeixner does always imply it. The thermodynamical restrictions ofMeixner are stated on the basis of theorems for rational positive functions. The propagation of sinusoidal plane waves in infinite medium is studied whenm 2. In the casesm = 0,n = 2 andm = 1,n = 3, it is shown that, when the dissipation is weak, the logarithmic decrement of the waves is smaller than 2 only in a finite frequency band. In the casem = 2,n = 4, we got < 2 only in disjoined finite frequency bands.

---

Zusammenfassung In dieser Arbeit befassen wir uns mit isotropen viskoelastischen Stoffen, die durch eine lineare Beziehung zwischen der Spannung und der Dehnung sowie deren Zeitableitungen bis zur Ordnungm bzw.n charakterisiert sind. Wir stellen fest, daßColemans Thermodynamik nicht die Kausalität des Modells impliziert, die stärkere Forderung vonMeixner dieses hingegen leistet. Die thermodynamischen Einschränkungen vonMeixner werden auf der Basis von Theoremen für rationale positive Funktionen dargestellt. Die Fortpflanzung von sinusförmigen ebenen Wellen in einem unendlichen Medium wird fürm 2 untersucht. Für die Fällem = 0,n = 2 undm = 1,n = 3 wird gezeigt, daß, solange die Dissipation gering ist, das logartithmische Dekrement der Wellen nur in einem endlichen Frequenzband kleiner als 2 ist. Für den Fallm = 2,n = 4 erhält man < 2 nur in nicht überlappenden endlichen Frequenzbändern.

     

Numerical study on local entropy generation in a burner fueled with various fuels

This study considers numerical simulations of the combustions of hydrogen and various hydrocarbons with air, including 21% oxygen and 79% nitrogen, in a burner and the numerical solution of the local entropy generation rate due to the high temperature and velocity gradients in the combustion chamber. The combustion is simulated for the fuel mass flow rates providing the same heat transfer rate to the combustion chamber in the each fuel case. The effects of (only in the case of H₂ fuel) and equivalence ratio () on the combustion and entropy generation rate are investigated for the different (from 5,000 to 10,000 W) and s (from 0.5 to 1.0). The numerical calculation of combustion is performed individually for all cases with the help of the Fluent CFD code. Furthermore, a computer program has been developed to numerically calculate the volumetric entropy generation rate distributions and the other thermodynamic parameters by using the results of the calculations performed with the FLUENT code. The calculations bring out that the maximum reaction rates decrease with the increase of (or the decrease of ). The large positive and negative temperature gradients occur in the axial direction, nonetheless, the increase of significantly reduces them. The calculations bring out also that with the increase of from 0.5 to 1.0, the volumetric local entropy generation rates decrease about 4% and that the merit numbers increase about 16%.     

Determination of permeability tensors for two-phase flow in homogeneous porous media: Theory

In this paper we continue previous studies of the closure problem for two-phase flow in homogeneous porous media, and we show how the closure problem can be transformed to a pair of Stokes-like boundary-value problems in terms of pressures that have units of length and velocities that have units of length squared. These are essentially geometrical boundary value problems that are used to calculate the four permeability tensors that appear in the volume averaged Stokes' equations. To determine the geometry associated with the closure problem, one needs to solve the physical problem; however, the closure problem can be solved using the same algorithm used to solve the physical problem, thus the entire procedure can be accomplished with a single numerical code.Nomenclature a a vector that maps V onto , m^-1. - A a tensor that maps V onto . - A area of the - interface contained within the macroscopic region, m². - A area of the -phase entrances and exits contained within the macroscopic region, m². - A area of the - interface contained within the averaging volume, m². - A area of the -phase entrances and exits contained within the averaging volume, m². - Bo Bond number (= (=(–)g²/). - Ca capillary number (= v/). - g gravitational acceleration, m/s². - H mean curvature, m^-1. - I unit tensor. - permeability tensor for the -phase, m². - viscous drag tensor that maps V onto V. - ^* dominant permeability tensor that maps onto v , m². - ^* coupling permeability tensor that maps onto v , m². - characteristic length scale for the -phase, m. - l characteristic length scale representing both and , m. - L characteristic length scale for volume averaged quantities, m. - n unit normal vector directed from the -phase toward the -phase. - n unit normal vector representing both n and n . - n unit normal vector representing both n and n . - P pressure in the -phase, N/m². - p superficial average pressure in the -phase, N/m². - p intrinsic average pressure in the -phase, N/m². - p –p , spatial deviation pressure for the -phase, N/m². - r ₀ radius of the averaging volume, m. - r position vector, m. - t time, s. - v fluid velocity in the -phase, m/s. - v superficial average velocity in the -phase, m/s. - v intrinsic average velocity in the -phase, m/s. - v –v , spatial deviation velocity in the -phase, m/s. - V volume of the -phase contained within the averaging volmue, m³. - averaging volume, m³. Greek Symbols V /, volume fraction of the -phase. - viscosity of the -phase, Ns/m². - density of the -phase, kg/m³. - surface tension, N/m. - (v +v ^T ), viscous stress tensor for the -phase, N/m².     

Indentation of the semi-infinite elastic solid by a concave rigid punch

A solution is obtained for the relationship between load, displacement and inner contact radius for an axisymmetric, spherically concave, rigid punch, indenting an elastic half-space. Analytic approximations are developed for the limiting cases in which the ratio of the inner and outer radii of the annular contact region is respectively small and close to unity. These approximations overlap well at intermediate values. The same method is applied to the conically concave punch and to a punch with a central hole. , , . , . . .